Understairs Storage Unit ssembly Instructions - Please keep for future reference 87/77 imensions Width - 81cm epth -.6cm Height - 91.cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the ustomer Helpline: 086 00800 Version ate: 6/11/1
Safety and are dvice Important - Please read these instructions fully before starting assembly heck you have all the components and tools listed on pages and. rom the plastic bags and separate them into their groups. Keep children and animals away from the work area, small parts could choke if swallowed. Make sure you have enough space to layout the parts before starting. o not use this item if any components are missing or damaged. o not stand on the product, this could cause damage. ssemble the item as close to room) as possible. ssemble on a soft level surface to avoid damaging the unit or your r. Parts of the assembly will be easier with people. We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. ispose of all packaging carefully and responsibly. are and maintenance Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners. From time to time check that there are no loose screws on this unit. This product should not be discarded with household waste. Take to your local authority waste disposal centre. 1
omponents - Panels If you have damaged or missing components, call the ustomer Helpline: 086 00800 Please check you have all the panels listed below 1 Top panel (0.8 x.cm) Large shelf panel (79. x.cm) Small side panel x (. x 0.8cm) 6 ottom panel (79. x.cm) Small shelf panel (9. x.cm) 7 Large side panel (91. x.6cm) entral panel (9. x.cm)
omponents - Fittings Note: The quantities below are the correct amount to complete the assembly. in some cases mor may be supplied than are required. 0mm Screw x 18 0mm owel x 8 9mm Locking pin x F 1mm Locking nut x G Wall strap x 1 (This screw is included in the bag of wall strap) x 1 Screw cover x 10 H 1mm Screw x 1 Wall plug x 1 Tools required Phillips screwdriver (medium & large) Flatblade screwdriver (medium) 0 10 0 0 0 0 60 70 80 90 100 110 10 10 10 10 0 1 6 Small hammer Ruler/tape measure ye protection (when using a hammer or glue) Ruler - Use this ruler to help correctly identify the screws 0 10 1 0 0 0 0 60 6 70 7 80 8 90 9 100 10 110 11 10 1 10 1 10 1 10 1 160 16 170
ssembly Instructions Step 1 ttaching small shelf panel Use Locking pin and owels to S s p onto the Top panel 1. Note: Insert Locking pin as far as shown. o not over tighten. the unit. n Use a screwdriver to turn Locking nut clockwise to lock. Small shelf panel onto the Small side panel. 1 Step ttaching central panel Use Locking pin and the Small side panel onto the Small shelf panel. Note: Insert Locking pin as far as shown. o not over tighten. b: Use Locking nut to b: Use a screwdriver to turn Locking nut clockwise to lock. entral panel onto the Small side panel.
ssembly Instructions Step ttaching large shelf panel Use Locking pin and the Small side panel onto the entral panel. Note: Insert Locking pin as far as shown. o not over tighten. b: Use Locking nut to b: Use a screwdriver to turn Locking nut clockwise to lock. Large shelf panel onto the Small side panel. Step ttaching bottom panel Use Locking pin and the Small side panel onto the Large shelf panel. Note: Insert Locking pin as far as shown. o not over tighten. ontinued on next page.
ssembly Instructions Step - continued b: Use Locking nut to b: Use a screwdriver to turn Locking nut clockwise to lock. ottom panel 6 onto the Small side panel. 6 Step ttaching large side panel Large side panel 7 onto the Top panel 1,Small shelf panel,entral panel, Large shelf panel and ottom panel 6. 7 1 6 b: Use Screw covers to cover the screw heads. b: 6
ssembly Instructions Step 6 Fixing to wall It is recommended that the wall. H strap G onto the back of top panel. G G F H wall Note: Wall plugs supplied are for solid wall only. be used for your wall, seek professional advice if in doubt With help, move storage unit into position. Top panel G G F Warning: The storage unit is heavy. Lift with care. remove storage unit. rill a hole and insert Wall plug F. Warning: efore drilling, check wall for hidden pipes and cables. storage unit strap using Screw G. ssembly is complete. If you need help or have damaged or missing parts, call the ustomer Helpline: 086 00800 7
Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: If plastic wall plugs are supplied with your product: check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. onsult a qualified tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice. Failure of the product due to responsibility of the installer. Types of walls 1: General rule: lways use a larger screw and wall plug if you are not sure. : nsure you use the recommended drill bit to match the wall plug and hole size. : nsure you drill the hole horizontally, do not force the drill or enlarge the hole. : Take extra care when drilling high walls, ceilings and ceramic tiles. nsure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking. : drilled hole. You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood. No.1 General Purpose wall plug No. avity Fixing wall plug No. Hammer Fixing wall plug Generally aerated blocks should not be used to support heavy loads, use For use with plasterboard partitions or hollow wooden doors. For use with walls stuck with loads, general purpose wall plugs can be used. No. Plasterboard wall plug For use when attaching light loads on to plasterboard partitions. are & Maintenance is secure to the retaining wall. No. avity Fixing-Heavy uty wall plug heavy loads such as shelving, wall cabinets and coat racks. Safety: lways check the fitting and location to ensure your safety in and around the home. No.6 Shield nchor wall plug Heavy loads For use with heavier loads such as TV & HiFi speakers and satelite dishes etc. Fitting: From time to time check the fitting to ensure the wall plugs or screws do not become loose. Revision - 7/10/09