Encoder WDG 0B www.wachendorffautomation.com/wdg0b Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum permissible loads 8hour express production Made in Germany Worldwide distributor network WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008
Encoder WDG 0B Economic encoder with mechanical carrying of loading Protection to IP7, shaft sealed to IP Optional: 0 C up to +8 C www.wachendorffautomation.com/wdg0b Resolution Max. pulses per revolution PPR Mechanical Data Housing Flange Flange material Housing cap Housing Cam mounting up to 00 PPR clamping flange aluminum aluminum, powder coated Ø 0 mm pitch mm Pulse frequency Channels Load Circuit protection ccuracy Phase offset TTL 00 ppr: max. 00 khz HTL 00 ppr: max. 00 khz B BN and inverted signals max. 0 m / channel circuit type H and R only pulse/pauseratio 0 % ± max. 7 % 90 ± max. 7. % of the pulse length Shaft(s) Shaft material Starting torque stainless steel Shaft Ø 8 mm Shaft length Max. Permissible shaft loading radial Max. Permissible shaft loading axial Bearings Bearings type approx. 0. Ncm at ambient temperature L: mm 0 N 70 N precision ball bearings Nominale service life x 0'8 revs. at 00 % rated shaft load x 0'9 revs. at 0 % rated shaft load x 0'0 revs. at 0 % rated shaft load Max. operating speed 000 rpm General Data Weight Connections approx. 0 g cable or connector outlet Protection rating (EN 09) Housing: IP, IP7; shaft sealed: IP Operating temperature 0 C up to +80 C Storage temperature 0 C up to +80 C More Information General technical data and safety instructions http://www.wachendorffautomation.com/gtd Options http://www.wachendorffautomation.com/acc Machinery Directive: basic data safety integrity level MTTF d Mission time (TM) 00 a a Nominale service life (L0h) x 0'0 revs. at 0 % rated shaft load and 000 rpm Diagnostic coverage (DC) 0 % Electrical Data Power supply/current consumption Power supply/current consumption Output circuit,7 VDC up to, VDC: typ. 70 m 0 VDC up to 0 VDC: typ. 70 m TTL, RS compatible, inv. HTL WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008
Cable connection K, L with m cable BN inv. poss. K axial, shield not connected L axial, shield connected to encoder housing ssignments Circuit GND (+) Vcc B N inv. B inv. N inv. Shield K, L H0, H WH BN GN YE GY flex K, L R0, R WH BN GN YE GY RD BK, (BU at C) VT flex WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008
Cable connection (Mx0.7) SI,,, 8, pin BN inv. poss. SI axial, pin, Connector connected to encoder housing SI axial, pin, Connector connected to encoder housing SI8 axial, 8pin, Connector connected to encoder housing SI axial, pin, Connector connected to encoder housing ssignments SI pin SI pin SI8 8pin SI8 8pin SI pin SI pin Circuit GND (+) Vcc B N inv. B inv. N inv. n. c. Shield H0, H H0, H H0, H, 7, 8 R0, R 7 8 H0, H K, L M, B E H C, D, F, G, J R0, R K, L M, B E H C F D G, J WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008
Connector (Mx0.7) S, 7pin BN inv. poss. S axial, 7pin, Connector connected to encoder housing ssignments S 7pin Circuit GND (+) Vcc B N inv. B inv. N inv. n. c. Shield H0, H, 7 WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008
Sensorconnector (Mx) SB,,, 8, pin BN inv. poss. SB axial, pin, Connector connected to encoder housing SB axial, pin, Connector connected to encoder housing SB8 axial, 8pin, Connector connected to encoder housing SB axial, pin, Connector connected to encoder housing ssignments SB pin SB pin SB8 8pin SB8 8pin SB pin SB pin Circuit GND (+) Vcc B N inv. B inv. N inv. n. c. Shield H0, H H0, H H0, H, 7, 8 R0, R 7 8 H0, H 8,, 7, 9, 0,, R0, R 8 9 7 0,,, WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008
Options Lowfriction bearings The encoder WDG 0B is also available as a particularly smoothrunning lowfriction encoder. The starting torque is thereby changed to 0. Ncm and the protection class at the shaft input to IP0. C Low temperature The encoder WDG 0B with the output circuit types H, R is also available with the extended temperature range 0 C up to +80 C (measured at the flange). Cable length The encoder WDG 0B can be supplied with more than m cable. The maximum cable length depends on the supply voltage and the frequency; see www.wachendorffautomation.com/atd Please extend the standard order code with a three figure number, specifying the cable length in decimetres. Example: m cable = 00 C XXX = Decimeter WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008 7
Example Order No. Type Your encoder WDG 0B WDG 0B WDG 0B Pulses per revolution PPR: 08, 9, 0,, 0,, 8, 0,, 0, 0, 0, 90, 00, 0,, 8, 0, 0, 80, 00,, 0, 00,, 8, 0, 00, 00, 00,,, 70, 900, 000, 0, 080, 00, 0, 00, 800, 000, 08, 00 Other PPRs on request Channels: BN B, BN bis 08 I/U Output circuit H Resolution PPR up to 00 Power supply VDC Output circuit.7. TTL H0.7. TTL, RS comp., inverted R0 0 0 HTL H 0 0 HTL inverted R Electrical connections K BN inv. poss. Cable: length ( m standard, WDG 8T: m) axial, shield not connected K axial, shield connected to encoder housing L Connector: (shield connected to encoder housing) connector, Mx0.7, pin, axial SI connector, Mx0.7, pin, axial SI connector, Mx0.7, 8pin, axial SI8 connector, Mx0.7, pin, axial SI connector, Mx0.7, 7pin, axial S sensorconnector, Mx, pin, axial SB sensorconnector, Mx, pin, axial SB sensorconnector, Mx, 8pin, axial SB8 sensorconnector, Mx, pin, axial SB Options Lowfriction bearings Low temperature Without option Cable length C C Empty XXX = Decimeter Example Order No.= WDG 0B 08 BN H K WDG 0B Your encoder WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008 8
For further information please contact our local distributor. Here you find a list of our distributors worldwide. http://www.wachendorffautomation.com/distributors_worldwide.html Wachendorff utomation GmbH & Co. KG Industriestrasse 7 D Geisenheim Phone: +9 7 / 99 Fax: +9 7 / 99 70 EMail: wdg@wachendorff.de www.wachendorffautomation.de WDG 0B Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 08008 9