107 chisels & breakers HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels
MASONRY AND CONCRETE SDS plus chisels 108 MORTAR RAKING DP-SDS-MRC Allows mortar removal without damaging brick - up to window and door frames and behind external pipework. Debris is in chunks as opposed to dust. For all types of mortar and all depths of mortar. WITH CARBIDE TIPS CRANKED BODY FOR ACCESS COPPER BRAZED TIPS BRICK REMOVAL DP-SDS-BRC Allows removal of whole bricks without damaging them and the bricks around them. All types of mortar and all depths of mortar. FLAT NARROWED END WITH CARBIDE TIPS LONG BLADE FOR FULL BRICK DEPTH TILE REMOVAL DP-SDS-TRC Angled blade ensures impact energy is exerted underneath the tile and not into the floor / wall. For all types of tile, plaster and adhesives CRANKED BODY / ANGLED BLADE IMPACT ENERGY UNDER TILE REMOVE TILE / ADHESIVE / PLASTER / HAMMER ACTION sds plus chisels - user tips haer chisels for masonry materials PART NO / LIST MORTAR RAKING CHISEL DP-SDS-MRC 31.45 BRICK REMOVING CHISEL DP-SDS-BRC 52.45 TILE REMOVING CHISEL DP-SDS-TRC 26.96 Always grease sds plus shanks before and during use. This will reduce heat build up and reduce wear on the machine & chisel itself Before using any sds plus machine - check that it has haer action only mode and ensure that this is engaged before using the chisel. Do not use on a machine that does not have this option Channelling chisels (DP-SDS-CC30/55/20) can be resharpened if they become blunt. Use a grinder or a good quality file Raking chisels are designed to have a shorter length in order to transmit as much power as possible For scutch comb holders - keep scutch comb teeth (or droves) in contact with the material at all times to stop the comb being levered out of the holder Mortar raking, tile removing and channelling chisels incorporate cranked shanks to ensure that the machine is angled away from the material being worked on. ORDER LINE; 01909 552470 www.duro-diamonds.com
MASONRY AND CONCRETE SDS plus chisels 109 CHANNELLING DP-SDS-CC30 / 55 / 20-EXT Quickly produce channels for cable runs etc. standard conduit (30), capping runs (55), behind skirting (20 extended) Can be used in conjunction with a wall chasing machine. For medium density block and soft brick. PRODUCES CHUNKS NOT DUST - HAMMER ACTION MACHINED HEAD 30MM, 55MM AND 20MM RAKING DP-SDS-RC30 / 55 For general masonry work in hard materials e.g channel chasing in engineering bricks. For all types of brick and masonry including engineering brick and also concrete. / LONG LIFE 30 & 55MM WITH NARROW END COPPER BRAZED CARBIDE TIP SCUTCH COMB DP-SDS-SC / SC-HOLDER ; Allows scutching operations using SDS plus machines instead of hand held. Interchangeable scutch ends mean no sharpening is necessary. Can also be used with droves in all types of masonry. For dressing, chasing etc. MULTI PURPOSE AND VERSATILE SEPARATE SCUTCH INSERTS haer chisels for masonry materials CHANNELLING CHISEL - 30MM PART NO / LIST DP-SDS-CC30 60.39 CHANNELLING CHISEL - 55MM DP-SDS-CC55 66.86 CHANNELLING CHISEL - 20MM DP-SDS-CC20-EXT 62.62 RAKING CHISEL - 30MM RAKING CHISEL - 55MM SCUTCH COMB HOLDER - 30MM SCUTCH COMB DP-SDS-RC30 64.70 DP-SDS-RC55 70.89 DP-SDS-SC-HOLDER 48.25 DP-SDS-SC 1.73
MASONRY AND CONCRETE SDS plus chisels 110 CHISEL DP-SDS-CHISEL & USAGE ; General purpose masonry work, 20 wide with 250 overall length. For all types of brick and masonry including engineering brick and also concrete. GENERAL PURPOSE FLAT CHISEL HEAD - 20MM wide CHISEL DP-SDS-SCHISEL & USAGE ; Scaling Chisel - General purpose masonry work, 40 wide with 250 overall length. For all types of brick and masonry including engineering brick and also concrete. 40MM WIDTH FLAT CHISEL HEAD - 40MM EXTRA WIDE CHISEL DP-SDS-EWC & USAGE ; Extra wide 80 blade for general purpose masonry work including chopping out electrical back boxes to size. 150 overall length. For medium density block, soft brick through to engineering brick. 80MM WIDTH WIDE FLAT CHISEL HEAD - 80MM haer chisels for masonry materials PART NO / LIST SDS PLUS CHISEL DP-SDS-CHISEL 7.24 SDS PLUS SCALING CHISEL DP-SDS-SCHISEL 9.40 SDS PLUS EXTRA WIDE CHISEL DP-SDS-EWC80 23.45 sds plus chisels - user tips Always grease sds plus shanks before and during use. This will reduce heat build up and reduce wear on the machine & chisel itself Before using any sds plus machine - check that it has haer action only mode and ensure that this is engaged before using the chisel. Do not use on a machine that does not have this option Channelling chisels (DP-SDS-CC30/55/20) can be resharpened if they become blunt. Use a grinder or a good quality file Raking chisels are designed to have a shorter length in order to transmit as much power as possible For scutch comb holders - keep scutch comb teeth (or droves) in contact with the material at all times to stop the comb being levered out of the holder Mortar raking, tile removing and channelling chisels incorporate cranked shanks to ensure that the machine is angled away from the material being worked on. ORDER LINE; 01909 552470 www.duro-diamonds.com
MASONRY AND CONCRETE SDS plus POINT 111 POINT DP-SDS-POINT General purpose masonry work, especially useful for chopping out drilled core holes. 250 overall length. For all types of brick and masonry including engineering brick and also concrete. 250MM LENGTH STRAIGHT CHISEL POINT gouging chisel DP-SDS-GC General purpose masonry work, u-shaped channel with 250 overall length. For all types of brick and masonry including engineering brick and also concrete. 250MM LENGTH U-SHAPED CHISEL END POINT & CHISEL SET DP-SDS-cp-set All set chisels are for general purpose masonry work. For all types of brick and masonry including engineering brick and also concrete. 4 PIECE POPULAR CHISEL SET ALL COMPONENTS ARE CHISEL, WIDE CHISEL, POINT & U SHAPE GOUGING CHISEL INCLUDED haer chisels for masonry materials PART NO / LIST SDS PLUS POINT DP-SDS-POINT 7.24 SDS PLUS GOUGING CHISEL DP-SDS-GC 10.50 4 PIECE POINT AND CHISEL SET DP-SDS-CP-SET 39.50
MASONRY AND CONCRETE SDS MAX chisels 112 point DP-SMAX-POINT & USAGE ; General purpose masonry work, especially useful when chopping out drilled core holes. All types of brick and masonry including engineering brick and also concrete. 360MM AND 500MM LENGTH OPTIONS STRAIGHT - CHISEL POINT - ROTO STOP chisel DP-SMAX-CHISEL General purpose masonry work. All types of brick and masonry including engineering brick and also concrete. 360MM AND 500MM LENGTH OPTIONS STRAIGHT - FLAT 25MM WIDE CHISEL - ROTO STOP EXTRA WIDE CHISEL DP-SMAX-EWC For general purpose masonry work including chopping out electrical back boxes to size. (80 only). Medium density block / Soft brick through to engineering brick 50MM WIDE (300MM O/A) AND 80MM WIDE (300MM O/A) OPTIONS STRAIGHT - FLAT WIDE CHISEL haer chisels for masonry materials PART NO / LIST SDS MAX POINT - 360MM DP-SMAX-POINT360 13.54 SDS MAX POINT - 500MM DP-SMAX-POINT500 19.14 SDS MAX CHISEL - 360MM DP-SMAX-CHISEL360 13.54 SDS MAX CHISEL - 500MM DP-SMAX-CHISEL500 19.14 SDS MAX WIDE CHISEL - 50MM DP-SMAX-EWC50 23.90 SDS MAX WIDE CHISEL - 80MM DP-SMAX-EWC80 26.15 sds MAX chisels - user tips Always grease sds max shanks before and during use. This will reduce heat build up and reduce wear on the machine & chisel itself Before using any sds max machine - check that it has haer action only mode and ensure that this is engaged before using the chisel. Do not use on a machine that does not have this option SDS Max points, chisels and extra wide chisels can be re-sharpened. ORDER LINE; 01909 552470 www.duro-diamonds.com
MASONRY AND CONCRETE SDS MAX chisels 113 BRICK REMOVAL DP-SMAX-BRC & USAGE ; Allows removal of whole bricks without damaging them and the bricks around them. For all types of mortar and all depths of mortar. COPPER BRAZED CARBIDE INSERTS LONG BLADE FOR FULL BRICK DEPTH FLAT - NARROWED END CLAY spade DP-SMAX-CSPADE Purpose designed blade for cutting / digging of bolder clay. Favoured by tunnelling contractors and companies specialising in under-pinning in clay conditions. Also excellent for general garden and landscaping. FLAT - WIDE SHOVEL HEAD FLOOR CLEANING TOOL DP-SMAX-FC-TOOL One piece floor cleaning tool with replaceable blade for removing floor based materials and coverings. REPLACEABLE BLADE haer chisels for masonry materials PART NO / LIST SDS MAX BRICK REMOVING CHISEL DP-SMAX-BRC 70.09 SDS MAX CLAY SPADE DP-SMAX-CSPADE 91.66 SDS MAX FLOOR CLEANING TOOL DP-SMAX-FC-TOOL 162.00
MASONRY AND CONCRETE SDS MAX STEM & ADAPTOR 114 stem DP-SMAX-STEM Stem - To be used in conjunction with bush haer heads and separate floor cleaning head & blade. STRAIGHT WITH K-TAPER END MAX TO PLUS DP-SMAX-SDS-AD Allows SDS Plus drill bits, chisels and accessories to be used in SDS Max machines - giving it flexibility of user options. HAMMER AND ROTARY ACTION USE SDS PLUS DRILL PRODUCTS IN SDS MAX MACHINES SCUTCH HOLDER DP-SMAX-SC-HOLDER Allows scutching operations using SDS MAX machines instead of hand held. Interchangeable end mean no sharpening is necessary. Can also be used with droves. For all types of masonry - dressing, chasing etc. MULTI-PURPOSE TOOL - EXTREMELY VERSATILE SEPARATE SCUTCH INSERTS haer chisels for masonry materials PART NO / LIST SDS MAX STEM DP-SMAX-STEM 34.51 SDS MAX PLUS TO MAX ADAPTOR DP-SMAX-SDS-AD 61.49 SDS MAX SCUTCH COMB HOLDER DP-SMAX-SCHOLDER 58.23 SDS SCUTCH COMBS DP-SDS-SC 1.73 ORDER LINE; 01909 552470 www.duro-diamonds.com
MASONRY AND CONCRETE BREAKER STEELS - KEY 115 CODE CODE 1 MOIL POINT 2 NARROW CHISEL Drop forged from high grade steel, this Haer Iron with heat treated work areas is used for demolition work and starting holes in the centre of a concrete slab. The most coon of the demolition steels used for general breaking where there is not a requirement to control the line of fracture. 3 WIDE CHISEL / BOLSTER CHISEL 4 Narrow chisel used in a similar way to the moil point but the line of fracture is controlled along the line of the chisel end. Used on applications where it is important to have a clean edge retained on the work-piece to be broken. 115 WIDE TARMAC CUTTER Wide chisel or bolster chisel used in a similar way to the moil point but the line of fracture is controlled along the line of the chisel end. Used on applications where it is important to have a clean edge retained on the work-piece to be broken. 5 CLAYSPADE 6 Tarmac Cutter used for cutting of coated stone. The wedge shape of the side profile is preferred by many operators as it facilitates easy removal of the blade after each cut. WIDE ASPHALT CUTTER Clayspade is a purpose designed blade for cutting / digging of boulder clay. The geometry facilitates the cutting action to return to an open face. If the edge is damaged during use it will destroy the natural scooping action. This tool is favoured by tunnelling contractors and companies specialising in underpinning in clay conditions. Also excellent for general garden and landscaping. 7 TAMPING PAD - 160 dia 8 Asphalt Cutter similar in application to the Tarmac Cutter but has the benefit of a thinner parallel side profile and radius on the blade allowing faster penetration in the cutting action. Suitable for lighter weight and less powerful breakers. STEM - Use with 180 dia tamping pad Floor compaction tool. 9 POINT 10 These tools need to be used together the stem can have a number of shank configurations to suit both Pneumatic and Electric powered breakers. The pad is selected to suit the type of compaction operation required whether this be for back filling following emergency repairs to services or compaction of mould in industrial applications. SCUTCH COMB HOLDER The most coon of the demolition steels used for general breaking where there is not a requirement to control the line of fracture. 11 FLOOR CLEANING TOOL 12 Allows scutching operations using power tools instead of hand held. Interchangeable scutch ends mean no sharpening is necessary. Can also be used with droves. STEM - Use with floor cleaning tools and pads Floor Cleaning Tool used in conjunction with a shank to suit the type of breaker to be used. It has a flexible replacement blade held in place by retaining bolts and can be used for the removal of lino tiles or debris spilt on to concrete floors prior to finishing. Stem for floor cleaning tool is available with different shank types and facilitates the use of the smaller electric tamping pads and especially the floor cleaning tool. HOW TO SELECT YOUR DURO BREAKER STEEL 1 2 CHOOSE THE KIND OF APPLICATION YOU NEED TO UNDERTAKE AND THEREFORE THE BREAKER STEEL TYPE YOU NEED TO ACHIEVE THIS FROM THE LIST ABOVE. THEN SELECT THE MACHINE TYPE YOU WILL BE USING FROM THE SELECTION OF PNEUMATIC AND ELECTRIC ACROSS PAGES 90-94 FOR EXAMPLE: 75MM WIDE CHISEL REQUIRED TO BE USED WITH A 32X160 HEX SHANK BREAKER
PNEUMATIC AND HYDRAULIC - hex shank breaker steels 116 32 X 160MM (1-¼" x 6-¼") HEX SHANK Moil point - 380 under collar 32.0x160HX-MP380 27.72 Moil point - 450 under collar 32.0x160HX-MP450 29.66 Narrow chisel - 380 under collar 32.0x160HX-NC380 27.72 Narrow chisel - 450 under collar 32.0x160HX-NC450 29.66 75 wide chisel 32.0x160HX-75WC380 49.29 115 wide tarmac cutter 32.0x160HX-115WTC300 56.40 Clayspade - 135 x 205 Blade 32.0x160HX-135x205S 95.54 Stem for use with 160 Pad 32.0x160HX-STEM 56.99 28 X 160MM (1-1/8" x 6-¼") HEX SHANK Moil point - 380 under collar 28.0x160HX-MP380 27.72 Moil point - 450 under collar 28.0x160HX-MP450 29.66 Narrow chisel - 380 under collar 28.0x160HX-NC380 27.72 Narrow chisel - 450 under collar 28.0x160HX-NC450 29.66 75 wide chisel 28.0x160HX-75WC380 49.29 115 wide tarmac cutter 28.0x160HX-115WTC300 56.40 25 X 108MM (1" x 4-¼") HEX SHANK Moil point - 380 under collar 25.0x108HX-MP380 27.72 Moil point - 450 under collar 25.0x108HX-MP450 29.66 Narrow chisel - 380 under collar 25.0x108HX-NC380 27.72 Narrow chisel - 450 under collar 25.0x108HX-NC450 29.66 Tarmac cutter - 115 wide 25.0x108HX-115WTC300 56.40 22 X 82MM (7/8" x 3-¼") HEX SHANK Moil point - 380 under collar 22.0x82HX-MP380 27.72 Moil point - 450 under collar 22.0x82HX-MP450 29.66 Narrow chisel - 380 under collar 22.0x82HX-NC380 27.72 Narrow chisel - 450 under collar 22.0x82HX-NC450 29.66 125 wide asphalt cutter - 300 under collar 22.0x82HX-125WTC300 56.40 Clayspade - 100 X 160 Blade 22.0x82HX-CS 84.74 MOIL POINT NARROW CHISEL WIDE / BOLSTER CHISEL WIDE TARMAC CUTTER TAMPING PAD tamping pad STEM ORDER LINE; 01909 552470 www.duro-diamonds.com
PNEUMATIC AND HYDRAULIC - hex & ROUND shank BREAKER STEELS 117 19 X 50MM (¾" x 2") HEX SHANK Moil point - 250 under collar 19.0x50HX-MP250 18.88 Narrow chisel - 250 under collar 19.0x50HX-NC250 18.88 60 wide chisel - 230 under collar 19.0x50HX-60WC230 29.05 25 X 75MM ROUND SHANK Moil point - 330 under collar 25.0X75RS-MP330 27.72 Narrow chisel - 330 under collar 25.0X75RS-NC330 27.72 CP9S SHANK BALL RETAINER CHUCK Point - 250 o/a length CP9S-P250 13.85 Narrow chisel - 250 o/a length CP9S-NC250 13.85 75 wide chisel - 250 o/a length CP9S-WC250 32.35 an extensive range of breakers available from our sister company yokota uk Unrivalled quality and market leading tool life Comprehensive service and support. Three exclusive brands lightweight haers heavy duty haers paving breakers rock drills POINT WIDE ASPHALT CUTTER SCUTCH Comb holder CLAYSPADE FLOOR CLEANING TOOLS floor cleaner STEM
KANGO & HILTI ELECTRIC breaker steels 118 KANGO 900/950 Moil point - 380 o/a length K900/950-MP380 11.86 Moil point - 450 o/a length K900/950-MP450 13.48 Narrow chisel - 380 o/a length K900/950-NC380 11.86 Narrow chisel - 450 o/a length K900/950-NC450 13.48 50 wide chisel - 300 o/a length K900/950-50WC300 20.49 75 wide chisel - 300 o/a length K900/950-75WC300 21.57 Stem for floor cleaning tool - 275 o/a K900/950-STEM 24.80 Clayspade - 100 x 165 Blade K900/950-CSPADE 70.09 Scutch comb holder K900/950-SCHOLDER 48.53 HILTI 905 & 1000 Moil point - 500 o/a length H905/1000-MP500 29.66 Narrow chisel - 500 o/a length H905/1000-NC500 29.66 75 wide chisel - 350 o/a length H905/1000-75WC500 52.31 Clayspade - 100 x 165 Blade H905/1000-CSPADE 80.13 Stem for floor cleaning tool 275 o/a length H905/1000-STEM 60.00 150 HILTI 3000 28 Moil point - 520 o/a length H3000-MP520 52.31 Narrow chisel - 520 o/a length H3000-NC520 52.31 115 wide tarmac cutter H3000-115WTC 118.00 MOIL POINT NARROW CHISEL WIDE / BOLSTER CHISEL WIDE TARMAC CUTTER TAMPING PAD tamping pad STEM ORDER LINE; 01909 552470 www.duro-diamonds.com
BOSCH ELECTRIC BREAKER STEELS 119 75 BOSCH 11205 37 35 16.5 Moil point - 380 o/a length B11205-MP380 15.10 Narrow chisel - 380 o/a length B11205-NC380 15.10 65 85 28 BOSCH 11304 USH 27 Moil point - 450 o/a length B11304-MP450 25.56 Narrow chisel - 450 o/a length B11304-NC450 25.56 Tarmac cutter 115 wide B11304-115WTC 77.64 an extensive range of breakers available from our sister company yokota uk Unrivalled quality and market leading tool life Comprehensive service and support. Three exclusive brands lightweight haers heavy duty haers paving breakers rock drills POINT WIDE ASPHALT CUTTER SCUTCH Comb holder CLAYSPADE FLOOR CLEANING TOOLS floor cleaner STEM
KANGO & HILTI ELECTRIC breaker steels 120 ACCESSORIES PADS / BUSH HAMMER HEADs / TOOLS 160 dia square tamping pad for use with 32x160 stems 160MM DIAMETER PAD 123.26 Floor cleaning head and blade for use with H905 / SMAX / K900 Stems FLOOR CLEANING TOOL 140.19 Spare 2 blade for floor cleaning tool CLEAN TOOL BLADE 30.74 Bush haer head for use with 50 Bush Haer Head 24.60 H905 / SMAX / K900 Stems N.B Not to be used with a HILTI TE500 or equivalent power machine - these machines are too powerful for this product an extensive range of floor scrapers available from our sister company yokota uk Unrivalled quality and market leading tool life Comprehensive service and support. ORDER LINE; 01909 552470 www.duro-diamonds.com