HARDWOOD COLLECTION High Quality Coating Systems for Windows and Doors Made of Wood
2
Content Hardwood such as oak, meranti, mahogany and teak are especially durable but they also have their price. When it comes to stability and the absorption of moisture, hardwood often has better properties than softwood. Because of their natural resistance, impregnation with biocide wood preservatives is often not necessary. However, constructive measures to protect the wood and regular care and maintenance are important. If these are given, hardwood will remain an eye-catcher for a long time: The interaction between a porous surface texture and a subdued coating system from Remmers coordinated to the specific wood ensures that the wood also feels just as expensive as it looks! Induline s 04 Induline LW-700 05 No Need to Fear Bad Air 06 Remmers System Guide 08 Load Groups 10 Application Overview 13 Remmers Guarantee 14 3
INDULINE PRIMERS The Basis for Perfectly Formed Pores Whether white or translucent: Induline primers also have other important functions for durable surface coatings besides just giving colour. Induline primers promote adhesion and make sure that the subsequently applied coating adheres to the substrate. And especially on porous types of wood, they play an important role in ensuring that pores are perfectly formed without any disturbances in the finished coating. Properties: Excellent run-off behaviour in dipping & flow coating procedures Wets pores uniformly on hardwood Special film preservatives provide additional protection against microbial infestation of the coating Outstanding sealing effect against substances in the wood when white coatings are applied Range of use: For dimensionally stable as well as nonstable wood building elements Windows, exterior doors & cladding System products: Induline ZW-400 Induline ZW-502 / ZW-504i Induline LW-700 4
INDULINE LW-700 Brilliant, Highly Transparent and Durable The appearance and durability of a window surface mainly depends on the thick-layer stain that is used. Microfoam is often the cause of cloudy-looking coating films. And cloudy-looking coating films are not as resistant to environmental influences such as the impact of hail. Induline LW-700 stands out because of its excellent transparency and it has been micro-foam optimised. With its highly elastic binders, even hail is not really able to harm the coating film and temporary water spots are not a problem either. Several years ago, the Austrian Wood Research Institute independently confirmed that Induline LW-700 is free of air bubbles (ÖNORM B3803). Properties: Highest possible brilliance and surface quality through micro-foam optimisation No water swelling (water spots) after drying Block-free up to at least 70 C Greater UV resistance Reliable colour stability Very good resistance to hail Range of use: For dimensionally stable wood building elements made of softwood and hardwood, e.g. windows, exterior doors, etc. For intermediate and finishing coats System products: Induline SW-900 Induline ZW-5xx Induline Shade of colour Art. No. Bucket: 5.0 l (SU: 96 buckets) Bucket: 20.0 l (SU: 22 buckets) Drum: 120.0 l (SU: 4 drums) LW-700/20 matt, various shades see Product Programme LW-700/40 silk gloss, various shades see Product Programme 5
NO NEED TO FEAR BAD AIR Perfect Room Climate in Tested Quality When humans stay in the rooms of buildings, their health and well-being not only depend on the climatic conditions that prevail in these rooms (especially temperature and relative humidity) but also on possible contamination of the indoor air. Remmers voluntarily had selected product systems independently tested according to the evaluation scheme issued by the German Committee for Health-Related Evaluation of Building Products (AgBB). The tested Remmers systems fulfilled the requirements of the AgBB evaluation scheme by a clear margin in regard to the emission of volatile organic compounds (VOC), including the limit value for formaldehyde. Benefits for customers: For manufacturers of CE-marked windows and doors (EN 14351-1): Clear statements on emission behaviour can be made (at least for the coating systems). With Remmers systems you are even on the safe side when it comes to the strict requirements on the quality of indoor room air, e.g. when the air could smell bad after coating inside brand new buildings or after renovation. 6
7
REMMERS SYSTEM GUIDE No matter whether translucent or opaque, light-coloured or dark! Here you will find the perfectly matched system for your type of wood! / substrates Properties translucent Intermediate coating / spraying procedure translucent Intermediate coating / flow coating procedure opaque Intermediate coating / spraying procedure opaque Intermediate coating / flow coating procedure Optimum all-round protection (moisture) Best possible sealing of substances in the wood Optimum all-round protection (moisture) Meranti < 490 > 400 kg/m² Often extremely different properties (e.g. shade of colour, bleeding of resin) C C C C Meranti < 490 kg/m² Often extremely different properties (e.g. shade of colour, bleeding of resin) A or B A or B A or B A or B Oak Contains tannic acid (staining possible); forced drying required; pores must be completely closed with lacquer C C C C Eucalyptus Globulus Rubber-like substances in the wood, tendency to warp C C C C Eucalyptus Grandis Cracks may form A or B A or B A or B A or B Utile / mahogany Often extreme differences in the shade of colour C C C C 8
Remmers Systems translucent Intermediate coating / spraying procedure translucent Intermediate coating / flow coating procedure opaque Intermediate coating / spraying procedure opaque Intermediate coating / flow coating procedure Optimum all-round protection (moisture) Best possible sealing of substances in the wood Optimum all-round protection (moisture) A Systems Induline SW-900 Induline LW-700 / Induline ZW-504i Induline LW-700 Induline SW-900 Induline ZW-502 Induline LW-700 Induline SW-900 Induline GW-201 Induline ZW-400 Induline DW-601 Induline SW-900 Induline GW-208 Induline GW-208 / Induline ZW-502 Induline DW-601 Properties Best possible wood protection Especially subdued look Best possible wood protection Especially subdued look Best possible wood protection : concentrate Best possible wood protection : ready-to-use B Systems Induline GW-306 Induline LW-700 / Induline ZW-504i Induline LW-700 Induline GW-306 Induline ZW-502 Induline LW-700 Induline GW-306 white Induline ZW-400 Induline DW-601 Induline GW-306 white Induline GW-306 white / Induline ZW-502 Induline DW-601 Properties Efficient (3-layer system) Efficient (3-layer system) Very good all-round protection: intermediate coating applied in a flow coating procedure Efficient (3-layer system) : ready-to-use Efficient (3-layer system) : ready-to-use C Systems Induline LW-700 / Induline ZW-504i Induline LW-700 Induline ZW-502 Induline LW-700 Induline GW-201 Induline ZW-400 Induline DW-601 Induline GW-208 Induline GW-208 Induline DW-601 Properties Efficient (3-layer system) Very good pore filling properties Efficient (3-layer system) Efficient (3-layer system) * When bright shades of colour with little hiding power are used, it may be necessary to apply 2 coats of Induline DW-625. ** In regard to Induline LW-725, take adjusted pigmentation into account if applicable 9
LOAD GROUPS Determination of the Load Group for Wood Windows and Exterior Doors The surface protection that will be required the factors named, you can determine or 1. Execution: first coat E will depend on several influence factors: re- check which surface system is right for 2. Window, species of wood: oak III gional weather load (e.g. normal climate or each building project. 3. Load: Residential building with sea climate), pronouncement of construc- The application example shows how to 4 storeys on an exposed, tive measures taken to protect wood do this: slope location, shade of colour (length of eaves), species of wood and type RAL 6009 fir green line 7 of surface coating (translucent or opaque). 4. Type of coating: opaque C With the aid of the table given below and Required coating group: C 7 / III-E Load ID / shade of colour Translucent coating (species group) Opaque coating (species group) III Hardwood (e.g. dark red meranti, oak) III Hardwood (e.g. dark red meranti, oak) Outdoor room climate / indirect weatheirng Constructive protection from precipitation and sunlight 1 light A C Outdoor climate with normal, direct weathering Areas with a normal climate load (no sea or mountain climate) Built-in situation: max. 3 storeys Weather acts directly on windows and doors 2 light * B C 3 medium B C 4 dark B C Outdoor climate with extreme, direct weathering Areas with strong climate loads Built-in situation: more than 3 storeys or no constructive protection (e.g. built in flush with the facade) Weather acts directly on windows and doors 5 light * C 6 medium B C 7 dark B C * When modern UV absorbers are added to certain light shades of translucent coatings, they can provide as much UV resistance as medium shades of colour. However, a corresponding formulation with UV absorbers must be examined in each case and approved by Remmers. For these shades of colour, the Care Set must be used twice a year. 10
11
Shade of colour 1 Meranti Impregnation *** pine (RC-250) Intermediate and Induline LW-700/40 silk gl. afzelia (RC-330) B3/III-E Shade of colour 2 Meranti Impregnation *** Intermediate and afromosia (RC-450) Induline LW-700/40 silk gl. light oak (RC-351) B6/III-E Shade of colour 3 Meranti Impregnation *** Intermediate and afromosia (RC-450) Induline LW-700/40 silk gl. afromosia (RC-450) B6/III-E Shade of colour 4 Meranti Impregnation *** Intermediate and teak (RC-551) Induline LW-700/40 silk gl. teak (RC-550) B6/III-E Shade of colour 5 Meranti Impregnation *** Intermediate and nutwood (RC-652) Induline LW-700/40 silk gl. nutwood (RC-652) B7/III-E with an evening effect RC-250-EG (when wood does not look uniform) FT32313 Opaque shade of colour** NCS S 3560-Y30R with an evening effect RC-450-EG (when wood does not look uniform) FT32314 Opaque shade of colour** NCS S 5040-Y40R with an evening effect RC-450-EG (when wood does not look uniform) RC-450 Opaque shade of colour** NCS S 4550-Y50R with an evening effect RC-551-EG (when wood does not look uniform) FT32316 Opaque shade of colour** NCS S 5040-Y60R with an evening effect RC-652-EG (when wood does not look uniform) One-pot system** RC-652 Opaque shade of colour** NCS S 7020-Y70R Shade of colour 6 oak Impregnation afzelia (RC-330) Intermediate and Induline LW-700/40 silk gl. afzelia (RC-330) B3/III-E Shade of colour 7 oak Impregnation Intermediate and teak (RC-551) Induline LW-700/40 silk gl. afromosia (RC-450) B6/III-E Shade of colour 8 oak Impregnation Intermediate and teak (RC-551) Induline LW-700/40 silk gl. light oak (RC-351) B6/III-E Shade of colour 9 oak Impregnation Intermediate and nutwood (RC-652) Induline LW-700/40 silk gl. afromosia (RC-450) B7/III-E Shade of colour 10 oak Impregnation Intermediate and wenge (RC-770) Induline LW-700/20 sm palisander (RC-750) B7/III-E RC-330 Opaque shade of colour** NCS S 4050-Y20R FT32319 Opaque shade of colour** NCS S 4550-Y50R FT32320 Opaque shade of colour** NCS S 5040-Y40R FT32321 Opaque shade of colour** NCS S 7020-Y40R FT32322 Opaque shade of colour** NCS S 8010-Y70R 12 * For especially scratch and hand cream resistant surfaces on doors, use Induline LW-725 / DW-625 instead of Induline LW-700 / DW-601. ** There may be slight deviations in the shade of colour due to the system; these are only approximations! *** When meranti has a density < 490 kg/m³ or > 400 kg/m³, impregnation with Induline SW-900 is recommended!
APPLICATION OVERVIEW The Most Important Remmers Systems and Their Applications Remmers Products Dimensionally stable building elements Building elements with limited stability Building elements that are not stable Windows Exterior doors Winter gardens High quality profiled boards Eave cladding / verges Strut frames, glued trusses, purlin heads, rafters Exterior gates, balconies, framework, folding shutters Exclusive garden pavillions and wood houses Higher quality timber used in gardens Panels made of wooden materials for facade elements Simple wood in gardens such as lattice fences, board walks ** Screen walls, pergolas, carports, etc. Playground equipment Sheds, barns Rustic cladding, boarding BRUSHING QUALITY TRANSLUCENT Remmers HK Stain Priming Priming, intermediate and finishing coat Priming, intermediate and finishing coat Remmers Long-Time Stain UV Priming, intermediate and finishing coat Priming and finishing coat Priming and finishing coat RemmersUV Translucent Top Intermediate and finishing coat Remmers Maintenance Oil ** Priming and finishing treatment** Remmers UV Weather Protection Stain Priming, intermediate and finishing coat Priming and finishing coat Priming and finishing coat Remmers Compact Stain PU Intermediate and finishing coat Priming and finishing coat Remmers Garden Wood Oils ** Priming and finishing treatment ** BRUSHING QUALITY OPAQUE Remmers Finishing Paint Priming and finishing coat Priming and finishing coat Remmers Compact Varnish PU Priming, intermediate and finishing coat Priming and finishing coat Remmers UV Opaque Top Priming, intermediate and finishing coat Priming and finishing coat EFFICIENT APPLICATION TRANSLUCENT Remmers Induline GW-310 (WF) Priming Priming and finishing coat Priming and finishing coat Remmers / 306 Priming Priming Priming Remmers Induline LW-760 Priming and finishing coat Remmers Induline LW-710 Finishing coat Remmers Induline LW-700 Intermediate and finishing coat Remmers Induline LW-725 * Intermediate and finishing coat Remmers Induline OW-815 ** Priming and finishing treatment ** EFFICIENT APPLICATION OPAQUE Remmers Induline GW-310 deckend Priming Priming, intermediate and finishing coat Priming, intermediate and finishing coat Remmers Induline DW-610 Priming, intermediate and finishing coat Priming, intermediate and finishing coat Remmers Induline DW-660 Priming and finishing coat Remmers Induline DW-601 Intermediate and finishing coat Remmers Induline DW-625 * Intermediate and finishing coat * Only suitable for exterior doors ** Surfaces that are subjected to foot traffic may only be treated with the marked products Detailed information on the range of use of the products named as well as possibilities for combining and handling are found in the latest Technical Data Sheets. 13
SYSTEMS WITH GUARANTEE No Renovation Coating for many Years The logical consequence of the superior properties of Induline Premium Coatings is the Remmers Guarantee for wood windows and doors. The safety that Induline Premium Coatings provide for wood windows and house doors in every step of the application process and the high quality standard of certified manufacturers of wood elements objectively oriented to important standards form the basis for our promise No restoration coatings for many years. But there are further important elements that make the guarantee to the quality assurance concept and valuable marketing instrument it is for the manufacturer of dimensionally stable wood building elements: Acceptance of the operation by a Remmers applications technician All production processes are precisely documented and recorded Systematic training of all involved employees Involvement of the consumer in maintaining the surfaces Remmers Guarantee Through the guarantee, active quality assurance is automatically carried out by the employees of dimensionally stable building element manufacturers well before they are marketed by certified companies. The guarantee helps the element manufacturer to position himself on the market as a quality supplier. In case of doubt, the guarantee is often the decisive factor for the award of an order and allows window & door manufacturers to demand higher prices on the market. 14
REGULAR CARE: The Remmers Care Sets, which were developed especially for house doors and windows, are an important component in the Remmers Guarantee. They are easy to use and extend restoration intervals as well as the service life of the coating: Sets containing cleaner and Care Balsam Closes micro-cracks (e.g. caused by hail) Streak-free on large surfaces Hardly any effect on the degree of gloss 15
www.remmers.de 886 / 11.13 GB