.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature range: - C to +0 C (including temperature rise in applying electrical current) Contact resistance: Initial value/m Ω max. After environmental testing/0m Ω max. Insulation resistance:,000m Ω min. Withstanding voltage:,00v AC/minute Applicable wire: AWG # to # 0. to.mm Applicable panel thickness: 0. to.0mm * RoHS compliant products are published. * Temperature Range: The aforementioned temperature range of this connector is described in JST Standard Product Specification. Maximum temperature registered in UL is 0 C. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. The retainer features added protection against non-insertion or disconnection. lance Secondary retainers Inner-housing lock Panel lock construction Standards 0 Recognized E0 Certified LR0 R0 Note: The current rating varies depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. Current unit: A # # #0 # # # 0 0 Wire size (AWG) Note: Secondary retainers cannot be used with AWG # wires. Assembly layout and Panel Layout.. (including retainer) Type Dimensions (mm) A B Single row -row -row.. 0. 0... A B. A B E D C. Receptacle housing Model No. Panel thickness (mm) Dimensions (mm) YLR-0V YLR-0V YLR-0V YLR-0V YLR-0V YLR-0V YLR-V YLR-VA YLR-V YLR-V YLR-V 0. to.0 0. to 0. 0. to.. to.0 A B C D 0. E 0. D 0. E 0. D 0. E 0. 0......0.0. 0.......0.0. 0. 0....................................................... 0.......................... Note:. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed.. The strength of the panel must be considered when punching two or more holes.. The connector must be inserted from the same side as the hole is punched.
Contact Pin contact Pin contact Model No. Socket contact Applicable wire mm AWG # Insulation O.D. (mm) Q'ty/ reel...0..0 0. SYM-0T-P0.A SYF-0T-P0.A 0. 0. 0.. SYM-T-P0.A SYF-T-P0.A *0. 0. 0. 0. 0 0 * 0+0...0. *...0.0,000 SYM-0T-P0.A,000 Material and Finish Socket contact....0.. Phosphor bronze, tin-plated (reflow treatment) Note:. Contact JST for special products.. s cannot be used with electric wire whose insulation O.D. exceeds.mm and AWG #.. *Marked products are not TÜV approved. Contact Crimping machine Crimp applicator SYM-0T-P0.A SYF-0T-P0.A * SYM-T-P0.A SYF-T-P0.A * Applicator Dies Crimp applicator with dies Note: *Strip-crimp applicator Contact position location numbers Contact position numbers are stamped Receptacle housing Plug housing Receptacle housing Plug housing 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Material:...PA, ULV-0, white...glass-filled PA, ULV-0, ivory Voltage Current 00V A 0A YLR-0VF YLP-0V YLS-0V...0. 00 00. 0...0...,000 YLR-0V 0..0 YLP-0V YLS-0V.0 00V A 0A YLR-0VF. 00 0....0.. 0. 00,000.. YLR-0V YLP-0V YLS-0V (commonly used for -circuit housing and -circuit housing) 00V YLR-0VF 00 0......0.0 A A.... 00.,000. 0....0.... Note: Current rating in parentheses is for use with AWG # wire. (s are not mountable.)
Material:...PA, ULV-0, white...glass-filled PA, ULV-0, ivory YLR-0V 0..0 YLP-0V YLS-0V.0 00V YLR-0VF... 00 00,000 YLR-0V..0 YLP-0V YLS-0V (commonly used for -circuit housing and -circuit housing).0 00V YLR-0VF... 00 00,000 YLR-0V YLP-0V YLS-0V.0..0 00V YLR-0VF... 0 00,000. Voltage Current A A 0.... 0... A A... 0.... 0.... L JST A A...0 0....... YLR-0V YLP-0V. 00V A A..0 0. 00.0.... 0..0 Note: Current rating in parentheses is for use with AWG # wire. (s are not mountable.)
Voltage Current YLR-VA..0 0. 00 YLP-VA Material:...PA, ULV-0, white...glass-filled PA, ULV-0, ivory. 0. 00 YLS-V.,000..0.. 0... 00V A A YLR-V YLP-V 00V A A..0.0 YLR-V..0 0. 0... 00 00 0. YLP-V...0. 0 0.. 00 00..0.. 0..0 00V A A YLR-V..0 0. 00 YLP-V. 0. 00 YLS-V.0,000..0.. 0... Note: Current rating in parentheses is for use with AWG # wire. (s are not mountable.)
Voltage Current 00V A A YLR-V..0 0 0. YLP-V. 0 Material:...PA, ULV-0, white 0. 00 00..0.. 0..0 Note: Current rating in parentheses is for use with AWG # wire. (s are not mountable.)