Multi- Cameras Base unit and sensor boards Up to four pixel-synchronous sensors connected to the base unit by flex-foil cable (LVDS data transfer) Free positioning of the external sensors Plug and play functionality: sensors can be added or removed easily; different sensor types may be connected to the same main board FPGA chip with MB RAM Individual configuration of each sensor Highspeed USB. interface SDK and API included, same API on all cameras Trigger input and strobe output Photo similar to original product Camera Configuration Configure your multi-sensor camera with one base unit VRmMFC and, 3, or 4 sensor boards VRm(M)S-X. Color and variants of the same sensor type may be used on the same base unit. Available Board Designs : sensor board without optics COB S-mount M1: sensor board with M1 lens mount, 1. mm F. hi-res lens, and filter glass : sensor board with C-mount and filter glass (no lens included) Options Flex Foil Cables Cable lengths up to cm (standard: 1 cm) Optics (COB designs only) Filter glass: window glass, IR-pass/cut filter, without filter (COB S-mount M1 and only). Further lenses on request (COB M1 only). 18 VRmagic Imaging GmbH, Mannheim Specifications subject to change without notice, errors excepted.
VRmMFC Base unit Base Unit 4 x M 17 Number of Boards 3 Board Stack Size 4 x x 1 mm 3 x 3 mm 3 Inter-board Distance mm 3 4 4 39 Interfaces 3 18 USB. port (USB Mini-B) 1 Hirose DF-1P for trigger, strobe, and external power supply Power supply via USB port possible for cameras with VRm(M)S-1 sensor boards External V DC power supply via Hirose DF-1P necessary for cameras with VRMS-9//1/18 sensor boards Hirose DF-1P 1 1 Camera Features 3.7 mm All sensors are trigge synchronously; the image data of all sensors is always available at the same time with sensor ID, timestamp, and framecounter User programmable windowing and panning Freely definable region of interest (ROI) per sensor Individual exposure time per sensor Adjustable anti-blooming circuit Pin 1 + 3 4 7 8 Signal + V DC Power IN (±%) and VBUS out GND GND Pin 9 11 1 13 1 Signal TTL Trigger In (+3.3... V) TTL Strobe Out (+ V) GND 18 VRmagic Imaging GmbH, Mannheim Updated 3..18 VRmagic Imaging GmbH Turley-Str. 817 Mannheim Germany Phone +49 1 41- Fax +49 1 41-9 info@vrmagic-imaging.com www.vrmagic-imaging.com
VRmS-9 board Characteristics Board 4 x M x M 1 MT9M1 CMOS, rolling shutter Size 1/ 3 Resolution 188 x 3 Pixel Size. µm x. µm 3 Max. Frame Rate 1 Hz 4 μs 8/ bit. MHz Responsivity >.1 V/lux sec Dynamic Range 8 db linear 8 COB S-mount M1 4 x x mm 4 x x mm 4 x 4 x 4 mm 3 x 3 mm Board COB S-mount M1 4 x M 1 3, 11, 8, 3 4 3 1 3 4 7 8 9 8 Maximum value at full ROI with minimum exposure time. Actual value depends on pixel clock, sensor settings, and image format. 18 VRmagic Imaging GmbH, Mannheim Specifications subject to change without notice, errors excepted.
VRmS-1 board Characteristics Board MT9V4 CMOS, global shutter 4 x M x M 1 or color 3 Size 1/3 wide Resolution 74 x 48 Pixel Size µm x µm 3 Max. Frame Rate 9 Hz 4 3 μs 8/ bit. MHz Responsivity 4.8 V/lux sec Dynamic Range db linear 8... db high dynamic 8 COB S-mount M1 4 x x mm 4 x x mm 4 x 4 x 4 mm 3 x 3 mm Board COB S-mount M1 4 x M 1 11, 8,, 3 3 4 3 1 3 4 7 8 9 8 Maximum value at full ROI with minimum exposure time. Actual value depends on pixel clock, sensor settings, and image format. 18 VRmagic Imaging GmbH, Mannheim Updated 3..18 VRmagic Imaging GmbH Turley-Str. 817 Mannheim Germany Phone +49 1 41- Fax +49 1 41-9 info@vrmagic-imaging.com www.vrmagic-imaging.com
USB components VRmMS-1 Compact sensor board Characteristics Board MT9V4 4 x M CMOS, global shutter Size or color 1/3 wide 9, 18 1 Resolution 74 x 48 4 Pixel Size µm x µm 8 Max. Frame Rate 9 Hz 3 μs 8/ bit. MHz Responsivity 4.8 V/lux sec Dynamic Range db linear 8... db high dynamic 8 3 COB S-mount M1 8 x x mm 8 x x 17 mm Board COB S-mount M1 4 x 1 mm 4 x M. 8 1. 1 4 8 3 1 8 3 3 4 7 8 9 Maximum value at full ROI with minimum exposure time. Actual value depends on pixel clock, sensor settings, and image format. 18 VRmagic Imaging GmbH, Mannheim Specifications subject to change without notice, errors excepted.
VRmS- board Characteristics Sony ICX44 Board 4 x M 1 CCD, interline transfer x M Size 1/3 Monochrome or color 3 Resolution x 9 Pixel Size 3.7 µm x 3.7 µm Max. Frame Rate 1 Hz 1 μs 8/ bit 3 4. MHz Board COB S-mount M1 4 x M 8 1 3, 11, 8, 7 COB S-mount M1 4 x x 7 mm 4 x x mm 4 x 4 x 4 mm 3 x 3 mm 1 3 4.8 Relative Response..4 1. 3 4 7 7 8 Maximum value at full ROI with minimum exposure time. Actual value depends on pixel clock, sensor settings, and image format. 18 VRmagic Imaging GmbH, Mannheim Updated 3..18 VRmagic Imaging GmbH Turley-Str. 817 Mannheim Germany Phone +49 1 41- Fax +49 1 41-9 info@vrmagic-imaging.com www.vrmagic-imaging.com
USB components VRmS-1 board Characteristics Board MT9M1 CMOS, global shutter 4 x M x M 1 Monochrome or color 3 Size 1/3 Resolution 18 x 9 Pixel Size 3.7 µm x 3.7 µm 3 Max. Frame Rate 1 Hz 4 187 μs bit COB S-mount M1 4 x x mm 4 x x mm 4 x 4 x 4 mm 8 3 x 3 mm Board COB S-mount M1 4 x M 1 8 7 11, 8, 3,. MHz 3 4 3 1 3 4 7 8 9 8 Maximum value at full ROI with minimum exposure time. Actual value depends on pixel clock, sensor settings, and image format. 18 VRmagic Imaging GmbH, Mannheim Specifications subject to change without notice, errors excepted.
USB components VRmS-18 Board Characteristics Board MT9M4 4 x M 1 CMOS, rolling shutter x M Monochrome or color 3 Size 1/3 Resolution 18 x 9 Pixel Size 3.7 µm x 3.7 µm 3 Max. Frame Rate 1 Hz 4 187 μs 1 bit. MHz COB S-mount M1 4 x x mm 4 x x mm 4 x 4 x 4 mm 8 3 x 3 mm Board COB S-mount M1 4 x M 1 11, 8, 3, 8 7 3 4 3 1 3 4 7 8 9 8 Maximum value at full ROI with minimum exposure time. Actual value depends on pixel clock, sensor settings, and image format. 18 VRmagic Imaging GmbH, Mannheim Updated 3..18 VRmagic Imaging GmbH Turley-Str. 817 Mannheim Germany Phone +49 1 41- Fax +49 1 41-9 info@vrmagic-imaging.com www.vrmagic-imaging.com