Distributed by: www.jameco.com -8-83-4242 The content and copyrights of the attached material are the property of its owner.
MUR5, MUR55, MUR5, MUR54, MUR56 Preferred Devices SWTCHMODE Power Rectifiers These state of the art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. Features Ultrafast 35 and 6 Nanosecond Recovery Time 75 C Operating Junction Temperature Popular Package High Voltage Capability to 6 V Low Forward Drop Low Leakage Specified @ 5 C Case Temperature Current Derating Specified @ Both Case and Ambient Temperatures Pb Free Packages are Available* Mechanical Characteristics: Case: Epoxy, Molded Weight:.9 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 26 C Max. for Seconds ULTRAFAST RECTFERS 5 AMPERES, 6 VOLTS 3 3 4 4 AC CASE 22B PLASTC MARKNG DAGRAM AY WWG U5xx KA A Y WW G U5xx KA = Assembly Location = Year = Work Week = Pb Free Package = Device Code xx =, 5,, 4 or 6 = Diode Polarity *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ORDERNG NFORMATON See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Semiconductor Components ndustries, LLC, 6 February, 6 Rev. 4 Publication Order Number: MUR5/D
MUR5, MUR55, MUR5, MUR54, MUR56 MAXMUM RATNGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol V RRM V RWM V R MUR 5 55 5 54 56 Unit 5 4 6 V Average Rectified Forward Current (Rated V R ) F(AV) 5 @ T C = 5 C 5 @ T C = 5 C A Peak Rectified Forward Current (Rated V R,, khz) FRM 3 @ T C = 5 C 3 @ T C = 5 C A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 6 Hz) FSM 5 A Operating Junction Temperature and Storage Temperature Range T J, T stg 65 to +75 C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. f these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERSTCS Parameter Symbol Value Unit Maximum Thermal Resistance, Junction to Case R JC.5 C/W ELECTRCAL CHARACTERSTCS Maximum nstantaneous Forward Voltage (Note ) (i F = 5 A, T C = 5 C) (i F = 5 A, T C = ) Characteristic Symbol 5 54 56 Unit v F.85.5..25..5 V Maximum nstantaneous Reverse Current (Note ) (Rated DC Voltage, T C = 5 C) (Rated DC Voltage, T C = ) i R 5 5 A Maximum Reverse Recovery Time ( F =. A, di/dt = 5 A/ s). Pulse Test: Pulse Width = 3 s, Duty Cycle %. t rr 35 6 ns 2
, NSTANTANEOUS FORWARD CURRENT (AMPS) F i 7 5 3 7. 5. 3...7.5.3.2..2.4.6.8. MUR5, MUR55, MUR5, MUR54, MUR56 T J = 5 C v F, NSTANTANEOUS VOLTAGE (VOLTS) Figure. Typical Forward Voltage MUR5, MUR55, MUR5 C.2.4.6, REVERSE CURRENT ( A) R, AVERAGE FORWARD CURRENT (AMPS) F(AV) 5 5 2.5.2..5 T J = 5 C.2. 4 6 8 8 8. 6. 4. 5 C V R, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current Rated Voltage Applied 7 T C, CASE TEMPERATURE ( C) Figure 3. Current Derating, Case 8, AVERAGE FORWARD CURRENT (AMPS) F(AV) 8. 6. R JA = C/W As Obtained From A Small Heatsink 4. R JA = 6 C/W As Obtained in Free Air, No Heat Sink 4 6 8 8, AVERAGE POWER DSSPATON (WATTS) P F(AV) 8. 6. 4. (Capacitive Load) PK =5. AV (Resistive Load) PK = π AV T J = 5 C 4. 6. 8. T A, AMBENT TEMPERATURE ( C) Figure 4. Current Derating, Ambient F(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Power Dissipation 3
, NSTANTANEOUS FORWARD CURRENT (AMPS) F, AVERAGE FORWARD CURRENT (AMPS) i F(AV) 7 5 3 7. 5. 3...7.5.3.2..2.4.6.8. MUR5, MUR55, MUR5, MUR54, MUR56 T J = 5 C v F, NSTANTANEOUS VOLTAGE (VOLTS) C Figure 6. Typical Forward Voltage.2.4.6 MUR54, REVERSE CURRENT ( A) R, AVERAGE FORWARD CURRENT (AMPS) F(AV), AVERAGE POWER DSSPATON (WATTS) P F(AV) 5 5 2.5.2..5.2. 5 5 25 3 35 4 45 5 8. 6. 4. 5 V R, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current Rated Voltage Applied 7 T C, CASE TEMPERATURE ( C) Figure 8. Current Derating, Case T J = 5 C (Resistive Load) PK = π AV (Capacitive Load) PK =5. AV R JA = C/W As Obtained From A Small 8. Heatsink 8. 6. 4. 6. T J = 5 C 4. R JA = 6 C/W As Obtained in Free Air, No Heat Sink 4 6 8 8 4. 6. 8. C 8 T A, AMBENT TEMPERATURE ( C) Figure 9. Current Derating, Ambient F(AV), AVERAGE FORWARD CURRENT (AMPS) Figure. Power Dissipation 4
, NSTANTANEOUS FORWARD CURRENT (AMPS) F, AVERAGE FORWARD CURRENT (AMPS) i F(AV) 7 5 3 7. 5. 3...7.5.3.2..2.4.6.8. 9. 8. 7. 6. 5. MUR5, MUR55, MUR5, MUR54, MUR56 v F, NSTANTANEOUS VOLTAGE (VOLTS) Figure. Typical Forward Voltage R JA = T J = 5 C C.2.4.6 C/W As Obtained From A Small Heatsink MUR56, REVERSE CURRENT ( A) R, AVERAGE FORWARD CURRENT (AMPS) F(AV), AVERAGE POWER DSSPATON (WATTS) P F(AV) 5 5 2.5.2..5 T J = 5 C.2 5 25 3 35 4 45 5 55 6 65 8. 6. 4. 5 C V R, REVERSE VOLTAGE (VOLTS) Figure. Typical Reverse Current Rated Voltage Applied 7 T C, CASE TEMPERATURE ( C) Figure 3. Current Derating, Case 4. 6. (Resistive nductive Load) PK = π AV 3. 4. T J = 5 C R JA = 6 C/W. As Obtained in Free Air, No Heat Sink 4 6 8 8 4. 6. 8. 8. (Capacitive Load) PK =5. AV 8 T A, AMBENT TEMPERATURE ( C) Figure. Current Derating, Ambient F(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Power Dissipation 5
MUR5, MUR55, MUR5, MUR54, MUR56 r(t), TRANSENT THERMAL RESSTANCE (NORMALZED)..5.2..5.2 D =.5..5. SNGLE PULSE...2.5..2.5. 5. 5 5 t, TME (ms) Figure. Thermal Response P (pk) t t 2 DUTY CYCLE, D = t /t 2 Z JC(t) = r(t) R JC R JC =.5 C/W MAX D CURVES APPLY FOR POWER PULSE TRAN SHOWN READ TME AT T T J(pk) T C = P (pk) Z JC(t) 5 T J = C, CAPACTANCE (pf) 5. 5. 5 V R, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Capacitance ORDERNG NFORMATON MUR5 MUR5G MUR55 MUR55G MUR5 MUR5G MUR54 MUR54G MUR56 MUR56G Device Package Shipping 5 Units / Rail For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8/D. 6
MUR5, MUR55, MUR5, MUR54, MUR56 PACKAGE DMENSONS TWO LEAD CASE 22B 4 SSUE D Q H L B 4 3 G D A K F T U R J C S NOTES:. DMENSONNG AND TOLERANCNG PER ANS Y.5M, 982. 2. CONTROLLNG DMENSON: NCH. NCHES MLLMETERS DM MN MAX MN MAX A.595.6 5. 5.75 B.38.45 9.65.29 C..9 4.6 4.82 D.25.35.64.89 F.2.7 3.6 3.73 G.9.2 4.83 5.33 H..3 2.79 3.3 J.8.25.46.64 K.5.562.7.27 L.45.6..52 Q.. 2.54 3.4 R.8. 4 2.79 S.45.55..39 T.235.255 5.97 6.48 U..5..27 SWTCHMODE is a trademark of Semiconductor Components ndustries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components ndustries, LLC (SCLLC). SCLLC reserves the right to make changes without further notice to any products herein. SCLLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCLLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCLLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCLLC does not convey any license under its patent rights nor the rights of others. SCLLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCLLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCLLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCLLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCLLC was negligent regarding the design or manufacture of the part. SCLLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLCATON ORDERNG NFORMATON LTERATURE FULFLLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 63, Phoenix, Arizona 8582 3 USA Phone: 48 829 77 or 8 344 386 Toll Free USA/Canada Fax: 48 829 779 or 8 344 3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 8 282 9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2 9 Kamimeguro, Meguro ku, Tokyo, Japan 53 5 Phone: 8 3 5773 385 7 ON Semiconductor Website: Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MUR5/D