EOLP-96-CLB-XX Copper SFP+ Cable Assemblies SFP+ Cable Assemblies, 0.5m/1m/2m/3m/4m/5m/6m/7m/8m/9m/10m/11m/12m/15m Reach RoHS6 Compliant Features Supports 1Gb/s to 10.5Gb/s bit rates Support 1x, 2x, 4x and 8x Fiber Channel data rates Hot-pluggable SFP 20PIN footprint AC coupling of PECL signals Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC performance Lower Power Consumption< 0.5W Power Supply: +3.3V Compatible to SFP+ MSA Temperature Range: 0~ 70 RoHS6 Compliant Applications Storage Area Networks (SAN), Network Attached Storage and Storage Servers 1G/2G/4G/8G Fiber Channel Switched fabric I/O Data center cabling infrastructure Hubs, switches, routers, servers, NICs Order Information Part No. Data rate Lengt Passive/Activ AWG h e Temp EOLP-96-CLB-H-30P Up to 10.5G 0.5m 30 Passive 0-70 EOLP-96-CLB-01-30P Up to 10.5G 1m 30 Passive 0-70 EOLP-96-CLB-02-30P Up to 10.5G 2m 30 Passive 0-70 EOLP-96-CLB-03-30P Up to 10.5G 3m 30 Passive 0-70 EOLP-96-CLB-04-30P Up to 10.5G 4m 30 Passive 0-70 EOLP-96-CLB-05-30P Up to 10.5G 5m 30 Passive 0-70 EOLP-96-CLB-H-24P Up to 10.5G 0.5m 24 Passive 0-70 EOLP-96-CLB-01-24P Up to 10.5G 1m 24 Passive 0-70 EOLP-96-CLB-02-24P Up to 10.5G 2m 24 Passive 0-70 EOLP-96-CLB-03-24P Up to 10.5G 3m 24 Passive 0-70 Page 1 of 8
Copper SFP+ Cable Assemblies EOLP-96-CLB-04-24P Up to 10.5G 4m 24 Passive 0-70 EOLP-96-CLB-05-24P Up to 10.5G 5m 24 Passive 0-70 EOLP-96-CLB-06-24P Up to 10.5G 6m 24 Passive 0-70 EOLP-96-CLB-07-24P Up to 10.5G 7m 24 Passive 0-70 EOLP-96-CLB-08-24P Up to 10.5G 8m 24 Passive 0-70 EOLP-96-CLB-09-24P Up to 10.5G 9m 24 Passive 0-70 EOLP-96-CLB-10-24P Up to 10.5G 10m 24 Passive 0-70 EOLP-96-CLB-11-24P Up to 10.5G 11m 24 Passive 0-70 EOLP-96-CLB-12-24P Up to 10.5G 12m 24 Passive 0-70 EOLP-96-CLB-05-30 Up to 10.5G 5m 30 Active 0-70 EOLP-96-CLB-07-30 Up to 10.5G 7m 30 Active 0-70 EOLP-96-CLB-10-28 Up to 10.5G 10m 28 Active 0-70 EOLP-96-CLB-12-28 Up to 10.5G 12m 28 Active 0-70 EOLP-96-CLB-10-24 Up to 10.5G 10m 24 Active 0-70 EOLP-96-CLB-15-24 Up to 10.5G 15m 24 Active 0-70 Note1: Standard version Regulatory Compliance Product Certificate Certificate Number Applicable Standard TUV R50135086 EN 60950-1:2006+A11+A1+A12 EN 60825-1:2007 EN 60825-2:2004+A1+A2 UL E317337 UL 60950-1 CSA C22.2 No. 60950-1-07 EMC CE AE 50135430 0001 EN 55022:2006 EN 55024:1998+A1+A2 CB JPTUV-024038-M1 IEC 60825-2 IEC 60950-1 FCC WTF13F0503735E 47 CFR PART 15 OCT., 2010 WTF13F0503732E 47 CFR PART 15 OCT., 2010 FDA 1230816-000 CDRH 1040.10 ROHS RLSZF00163462 2011/65/EU Product Description EOLP-96-CLB-XX Copper SFP+ Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standard. Page 2 of 8
Absolute Maximum Ratings Copper SFP+ Cable Assemblies Parameter Symbol Min Typ Max Units Maximum Supply Voltage Vcc -0.5 4.0 V Storage Temperature T S -40 85 C Normal operating condition Parameter Symbol Min Typ Max Units Ref. Operating Case Temperature Top 0 70 C Supply Voltage Vcc 3.14 3.3 3.47 V Power Consumption P 0.5 W Data Rate 1 10.5 Gbps Performance Specifications Electrical Parameter Symbol Min. Typ. Max Unit Notes Supply Current Icc - - 100 ma Note2 Transmitter Differential Input Voltage (PECL) Receiver Differential Output Voltage (PECL) VIN 250-1200 mvpp VO 185-1000 mvpp Impedance Zcable 90 100 110 Ohms MOD-DEF1, 2 VIH 2.0 - Vcc V Note2: The supply current includes SFP Module s supply current and test board working current. Physical Data Parameter Description 30AWG 28AWG 24AWG Units Cable Diameter OD 4.5 5.5 6.5 mm Bend Radius Minimum Sustained Bend 25 30 35 mm Page 3 of 8
Reference Interface Copper SFP+ Cable Assemblies Pin Descriptions Page 4 of 8
Copper SFP+ Cable Assemblies Pin No. Logic Symbol Name/Description Note 1 VeeT Transmitter Ground 2 LV-TTL-O TX_Fault N/A 1 3 LV-TTL-I TX_DIS Transmitter Disable 2 4 LV-TTL-I/O SDA Two Wire Serial Data 5 LV-TTL-I SCL Two Wire Serial Clock 6 MOD_DEF0 Module present,connect to VeeT. 7 LV-TTL-I RS0 N/A 1 8 LV-TTL-O LOS LOS of Signal. 2 9 LV-TTL-I RS1 1 10 VeeR Receiver Ground 11 VeeR Receiver Ground 12 CML-O RD- Receiver Data Inverted 13 CML-O RD+ Receiver Data NON-Inverted 14 VeeR Receiver Ground 15 VccR Receiver Supply 3.3V 16 VccT Transmitter Supply 3.3V 17 VeeT Transmitter Ground 18 CML-I TD+ Transmitter Data Non-Inverted 19 CML_I TD- Receiver Data Inverted 20 VeeT Transmitter Ground Notes: 1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor. 2. Passive cable assemblies do not support LOS and TX_DIS EEPROM Serial ID Memory Contents Page 5 of 8
Copper SFP+ Cable Assemblies Data Size Address (Bytes) Name of Field Contents(Hex) Description BASE ID FIELDS 0 1 Identifier 03 SFP 1 1 Ext. Identifier 04 SFP function is defined by serial ID only 2 1 Connector 21 Copper Pigtail 3-10 8 Transceiver 00 00 00 FF 00 00 00 00 Transceiver Codes 11 1 Encoding 01 8B10B 12 1 BR, Nominal XX 13 1 Reserved 00 14 1 Length (9μm) km 00 15 1 Length (9μm) 100m 00 16 1 Length (50μm) 10m 00 17 1 Length(62.5μm)10m 00 18 1 Length (Copper) 00 19 1 Reserved XX 20-35 16 Vendor name XX 36 1 Reserved 00 37-39 3 Vendor OUI 00 00 00 40-55 16 Vendor PN XX 56-59 4 Vendor rev XX 60-61 2 Wavelength 00 00 62 1 Reserved 00 63 1 CC_BASE Check Sum (Variable) EXTENDED ID FIELDS 64-65 2 Options 00 00 66 1 BR,max 00 67 1 BR,min 00 68-83 16 Vendor SN XX Serial Number of transceiver (ASCII). For example B009822. 84-91 8 Date code XX Manufactory date code. For example 060805. 92 1 Diagnostic Monitoring Type 00 93 1 Enhanced Options 00 94 1 SFF_8472 Compliance 00 95 1 CC_EXT Check Sum (Variable) VENDOR SPECIFIC ID FIELDS 96-127 32 Vendor specific XX Vendor specific Page 6 of 8
Copper SFP+ Cable Assemblies EEPROM 128-255 128 Reserved XX Reserved for SFF-8079 Mechanical Specifications Obtaining Document You can visit our website: http://www.eoptolink.com Or contact listed at the end of the documentation to get the latest documents. Revision History Revision Initiated Review Approved Revision History Release Date V1.a Cathy Released. September 26, 2010 V1.b Arvin Kelly Update the application, the mechanical and the 2012-03-05 electric of Tx and Rx V1.c Arvin Kelly ADD EOLP-96-CLB-15 2012-03-13 V1.d Frank Kelly Add new types. 2012-04-10 Frank Kelly, Grace, Picasso Add new types. 2014-06-16 Page 7 of 8
Notice: Copper SFP+ Cable Assemblies Eoptolink reserves the right to make changes to or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Eoptolink makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Contact: Add: Floor 5, Building 2, No. 21 Gaopeng Avenue, High-Tech District, CHENGDU, SICHUAN 610041 P.R. CHINA Tel: (+86) 028-85122709 ext 816 & 809 Fax: (+86) 028-85121912 Postal: 610041 E-mail:sales@eoptolink.com http://www.eoptolink.com Page 8 of 8