True%Analog%Non-Mechanical%Beam%Steering%Using%Liquid%Crystal% Waveguide%Techniques%

Similar documents
An Analog, Non-Mechanical Beam-Steerer with an 80 Degree Field of Regard for LIDAR Applications

A LIGHTWEIGHT, COST-EFFICIENT, SOLID-STATE LIDAR SYSTEM UTILIZING LIQUID CRYSTAL TECHNOLOGY FOR LASER BEAM STEERING FOR ADVANCED DRIVER ASSISTANCE

Opto-VLSI-based reconfigurable photonic RF filter

Electronically switchable Bragg gratings provide versatility

Polarization Gratings for Non-mechanical Beam Steering Applications

Photonic Signals. and Systems. An Introduction. NabeelA.Riza/Ph.D. Department of Electrical and Electronic Engineering University College Cork

Fast, Two-Dimensional Optical Beamscanning by Wavelength Switching T. K. Chan, E. Myslivets, J. E. Ford

Project: IEEE P Working Group for Wireless Personal Area Networks N

Integrated electro-optical waveguide based devices with liquid crystals on a silicon backplane

NEW APPROACH TO DESIGN DIGITALLY TUNABLE OPTICAL FILTER SYSTEM FOR WAVELENGTH SELEC- TIVE SWITCHING BASED OPTICAL NETWORKS

3550 Aberdeen Ave SE, Kirtland AFB, NM 87117, USA ABSTRACT 1. INTRODUCTION

Hybrid Integration Technology of Silicon Optical Waveguide and Electronic Circuit

Wavelength-sensitive Thin Film Filter-based Variable Fiber-optic Attenuator with an Embedded Monitoring Port

MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Electrical Engineering and Computer Science

A novel tunable diode laser using volume holographic gratings

MODULAR ADAPTIVE OPTICS TESTBED FOR THE NPOI

Broadband Optical Phased-Array Beam Steering

Next Generation Photonic True Time Delay Devices as Enabled by a New Electro-Optic Architecture

Principles of Optics for Engineers

Department of Electrical Engineering and Computer Science

Integrated electro-optic lens scanner in a LiTaO 3 single crystal

A NEW APPROACH TO DESIGN DIGITALLY TUNABLE OPTICAL FILTER SYSTEM FOR DWDM OPTICAL NETWORKS

Compact Liquid Crystal Waveguide Based Fourier Transform Spectrometer for In-Situ and Remote Gas and Chemical Sensing

IST IP NOBEL "Next generation Optical network for Broadband European Leadership"

Adaptive multi/demultiplexers for optical signals with arbitrary wavelength spacing.

Copyright 2005 Society of Photo Instrumentation Engineers.

INTEGRATED ACOUSTO-OPTICAL HETERODYNE INTERFEROMETER FOR DISPLACEMENT AND VIBRATION MEASUREMENT

Module 19 : WDM Components

Compact Liquid Crystal Waveguide Based Fourier Transform Spectrometer for In-Situ and Remote Gas and Chemical Sensing

The Beam Characteristics of High Power Diode Laser Stack

OPTI510R: Photonics. Khanh Kieu College of Optical Sciences, University of Arizona Meinel building R.626

Copyright 2004 Society of Photo Instrumentation Engineers.

Dynamic optical comb filter using opto-vlsi processing

Integrated Optical Waveguide Sensor for Lighting Impulse Electric Field Measurement

Opto-VLSI based Broadband Reconfigurable Optical Add-Drop Multiplexer

Introduction and concepts Types of devices

Electronically tunable fabry-perot interferometers with double liquid crystal layers

Novel Optical Waveguide Design Based on Wavefront Matching Method

Integrated Photonics based on Planar Holographic Bragg Reflectors

Index. Cambridge University Press Silicon Photonics Design Lukas Chrostowski and Michael Hochberg. Index.

880 Quantum Electronics Optional Lab Construct A Pulsed Dye Laser

EE119 Introduction to Optical Engineering Spring 2003 Final Exam. Name:

SPP waveguide sensors

Diffraction, Fourier Optics and Imaging

Ultralight Weight Optical Systems using Nano-Layered Synthesized Materials

CREATING ROUND AND SQUARE FLATTOP LASER SPOTS IN MICROPROCESSING SYSTEMS WITH SCANNING OPTICS Paper M305

Vanishing Core Fiber Spot Size Converter Interconnect (Polarizing or Polarization Maintaining)

Photonics and Optical Communication

Physics 431 Final Exam Examples (3:00-5:00 pm 12/16/2009) TIME ALLOTTED: 120 MINUTES Name: Signature:

Beam Shaping and Simultaneous Exposure by Diffractive Optical Element in Laser Plastic Welding

Reconfigurable True-Time Delay for Wideband Phased-Array Antennas*

Mach Zehnder Interferometer True Time Delay Line

Dynamic Opto-VLSI lens and lens-let generation with programmable focal length

Novel broadband reconfigurable optical add-drop multiplexer employing custom fiber arrays and Opto-VLSI processors

Imaging with microlenslet arrays

Dense Spatial Multiplexing Enables High Brightness Multi-kW Diode Laser Systems

Use of Reconfigurable IM Regions to Suppress Propagation and Polarization Dependent Losses in a MMI Switch

Optical Polarization Filters and Splitters Based on Multimode Interference Structures using Silicon Waveguides

Photonic Integrated Circuits for Coherent Lidar

Copyright 2000 Society of Photo Instrumentation Engineers.

Fabrication of Probes for High Resolution Optical Microscopy

High brightness semiconductor lasers M.L. Osowski, W. Hu, R.M. Lammert, T. Liu, Y. Ma, S.W. Oh, C. Panja, P.T. Rudy, T. Stakelon and J.E.

OPERATING MANUAL. 100 MHz CENTER FREQUENCY OFF AXIS ACOUSTO-OPTIC BEAM DEFLECTOR MODEL NUMBER: DEG-.51 DOCUMENT NUMBER: 51A12229A

Lecture 5. SPR Sensors: Principle and Instrumentation.

OPTICAL NETWORKS. Building Blocks. A. Gençata İTÜ, Dept. Computer Engineering 2005

Waveguide Bragg Gratings and Resonators LUMERICAL SOLUTIONS INC

A High-Concentration Programmable Solar Simulator for Testing Multi-Junction Concentrator Photovoltaics

Near-field Optical Microscopy

Optical Fibers p. 1 Basic Concepts p. 1 Step-Index Fibers p. 2 Graded-Index Fibers p. 4 Design and Fabrication p. 6 Silica Fibers p.

High-Coherence Wavelength Swept Light Source

Fiber Optic Communications

Ph 77 ADVANCED PHYSICS LABORATORY ATOMIC AND OPTICAL PHYSICS

Optics Communications

R. J. Jones Optical Sciences OPTI 511L Fall 2017

Chapter 1 Introduction

New Waveguide Fabrication Techniques for Next-generation PLCs

High-Power LDA Beam Transformation using Diffractive Grating Array

Microphotonics Readiness for Commercial CMOS Manufacturing. Marco Romagnoli

Optical Microscopy and Imaging ( Part 2 )

Stereoscopic Hologram

Optical Components for Laser Applications. Günter Toesko - Laserseminar BLZ im Dezember

Condition Mirror Refractive Lens Concave Focal Length Positive Focal Length Negative. Image distance positive

Ultra-stable flashlamp-pumped laser *

Research on Retro-reflecting Modulation in Space Optical Communication System

Tunable wideband infrared detector array for global space awareness

An Optical Characteristic Testing System for the Infrared Fiber in a Transmission Bandwidth 9-11μm

Supplementary Figure 1. GO thin film thickness characterization. The thickness of the prepared GO thin

High-speed free-space based reconfigurable card-to-card optical interconnects with broadcast capability

Waveguide-based single-pixel up-conversion infrared spectrometer

A 243mJ, Eye-Safe, Injection-Seeded, KTA Ring- Cavity Optical Parametric Oscillator

Tunable Photonic RF Signal Processor Using Opto-VLSI

The Lightwave Model 142 CW Visible Ring Laser, Beam Splitter, Model ATM- 80A1 Acousto-Optic Modulator, and Fiber Optic Cable Coupler Optics Project

Compact Dual Field-of-View Telescope for Small Satellite Payloads. Jim Peterson Trent Newswander

A laser speckle reduction system

Where λ is the optical wavelength in air, V a is the acoustic velocity, and f is the frequency bandwidth. Incident Beam

E LECTROOPTICAL(EO)modulatorsarekeydevicesinoptical

X-ray light valve (XLV): a novel detectors technology for digital mammography*

Holographic RAM for optical fiber communications

Week IV: FIRST EXPERIMENTS WITH THE ADVANCED OPTICS SET

High power single frequency 780nm laser source generated from frequency doubling of a seeded fiber amplifier in a cascade of PPLN crystals

Transcription:

True%Analog%Non-Mechanical%Beam%Steering%Using%Liquid%Crystal% Waveguide%Techniques% Scott Davis, Scott Rommel, Mike Anderson, Derek Gann Vescent Photonics, 14998 W. 6 th Ave., Golden, CO 80401 The world has long sought an electro-optic (EO) alternative to mechanically moving lenses and/or mirrors. Unfortunately, despite significant past efforts, for many optical-beam-control needs, opto-mechanics remains the only practical solution. This restriction can impose significant limitations on many important performance criteria including: cost, size, weight, vibration immunity, power consumption, speed, and device lifetime. To help alleviate this we have developed a new EO architecture that provides simple and cost effective electro-optic control over a beams direction, focus, and/or delay. For example, Figure 1 shows an EO laser scanner with a 30 o 5 o field of view. The output angle may be voltage set to any value within this field of regard with only three control electrodes. These scanners, and others enabled by our new EO architecture, have very low power consumption, are small, fast, rugged, and simple to use. Figure 1: Pictures of simple, wide field of view EO scanners. LEFT) The optical head. A short-wave infrared beam enters the device through the single mode polarization maintaining fiber and an EO scannable beam exits through the window. RIGHT) The photonics package mounted and a cartoon depiction of the EO scannable field of view. EO scanners that provide high-speed, wide field-of-views (FOVs), are compact, simple, and low cost have been a long-standing dream of the optical community.[1-5] Unfortunately, they are still not available. This is not for lack of effort; for example, liquid crystal (LC) based tunable diffraction gratings or optical phased arrays have been in development for more than thirty-five years.[2, 5-7] Other diffractive approaches 1 2015

such as MEMs arrays (though these are still inherently mechanical),[8] electro-wetting arrays,[9] and acousto-optics have also been explored. Typically, these diffractive approaches have been limited to small angle scanners because the grating efficiency drops as scan angle increases. Rather than continue down this well-trodden diffractivepath we have taken a new approach. We exploit a new EO architecture that provides unprecedented voltage control over optical phase, which enables previously unrealizable refractive scanners.[10] The enabling innovation is to utilize liquid crystals (LCs), which have by far the largest electro-optic response of any known material (e.g., >10 5 times larger than lithium niobate), in a new configuration. Rather than transmit through an LC cell, which by design must be thin (typically <20 µm), we utilize the LC as a cladding layer in an LCwaveguide architecture, as shown in the bottom of Figure 2. The evanescent field of the guided wave extends into an adjustable-index liquid-crystal cladding. This selectively utilizes the well-ordered LC-surface region that provides low scattering losses (<0.5 db/cm) and fast response times (in the range of 10 to 500 µs). Furthermore, the interaction length is now decoupled from the thickness of the LC layer. This allows us to circumvent the historic LC-limitations of a short interaction length and slow relaxation times. We realize substantially larger voltage control over optical phase than any other approach that we are aware of. Optical phase delays of greater than 2 mm have been achieved. 2 2015

Figure 2 TOP LEFT) A 2-D electro-optic laser scanner. Voltage applied to the zig-zag patterned electrode (top left) provides in-plane scanning and voltage applied to the rectangular electrode provides out-of-plane scanning. TOP RIGHT) A picture of an EO scanner chip next to a quarter for scale. BOTTOM) A side view of a liquid crystal waveguide scanner. Integrated tapered-couplers provide both convenient coupling of round Gaussian beams and out-of-plane scanning control. This giant control over optical phase provides a natural solution to the problem of non-mechanical beam control. For scanning in the plane of the waveguide we pattern an electrode into refractive shapes, as shown in the top of Figure 2. Voltage applied to the electrodes tunes the index inside the refractive shapes, thereby providing a tunable Snell s law refraction. To realize scan control out of the plane of the waveguide we utilize integrated prism couplers.[11] Voltage tuning the LC-waveguide index of refraction in the out-coupler region controllably alters the out-of-plane scan angle. The steering is non-diffractive and analog. New 2-D devices provide 30 o 5 o of scan control. A short video of a 2-D scanner in operation may be viewed online.[12] Because the scanning is refractive there are no 2π resets and no blind spots known challenges with prior diffractive approaches. Full refractive scanning provides continuous, high-speed sweeps across the field of view. Since the voltage control over optical phase is so much larger than other technical approaches we can realize dramatically larger EO control over optical beams. By way of example we have recently demonstrated in-plane beam steering of 270 o (an unheard of amount for any technology) in a package that is smaller than a dime, as shown in Figure 3. A movie of this is also available online.[12] In this figure the images are of the 3 2015

Figure 3: Example data from an electrode pattern that provided steering of 1550 nm light by 270º in a package that is smaller than a dime. scattered streak of light as it propagates through the device. Similarly, the refractive shapes may be curved or lens shaped, providing voltage tunable lenses. Figure 4 shows operation of an example tunable lens that provides continuous voltage tuning of the focal length from infinity to 0.5 centimeters. The top image shows a collimated beam at zero volts and the bottom image shows a voltagecontrolled focused beam. The LC-waveguide architecture is a new electrooptic innovation that provides unprecedented voltage control over optical phase (>2 mm). This previously unrealizable level of control makes possible new electro-optic alternatives to opto-mechanics. These devices can provide wide field of view laser scanners, voltage-tunable lenses, and other formerly mechanical functionalities. Finally they are small, low power, and simple to use. Figure 4: Operation of a voltage tunable lens. Acknowledgments This research effort was supported by contracts from the National Aeronautics and Space Administration, the Navy Research Labs, and the Air Force Research Laboratory. 1. Kim, J.-h., et al., Polymer-based thermo-optic waveguide beam deflector with novel dual folded-thin-strip heating electrodes. Optical Engineering, 2003. 42(3): p. 620-624. 2. McManamon, P., An overview of optical phased array technology and status. Liquid Crystals: Optics and Applications, 2005. 5947. 4 2015

3. Scrymgeour, D.A., et al., Large-angle electro-optic laser scanner on LiTaO3 fabricated by in situ monitoring of ferroelectric-domain micropatterning. Applied Optics, 2001. 40(34): p. 6236. 4. Sun, L., et al., Polymeric waveguide prism-based electro-optic beam deflector. Optical Engineering, 2001. 40(7): p. 1217-1222. 5. McManamon, P., et al., A Review of Phased Array Steering for Narrow-Band Electrooptical Systems. Proceedings of the IEEE, 2009. 97(6): p. 1078-1096. 6. Borel, J., et al., Liquid Crystal Diffraction Grating, U.S.Patent Office, 1974, Patent Number 3,843,231 7. Huignard, J.P., M. Malard, and G.d. Corlieu, Static Deflector Device for An Infrared Beam, U.S. Patent Office, 1987, Thomson-CSF: USA. Patent Number 4,639,091 8. Ryf, R., H.R. Stuard, and C.R. Giles, MEMS tip/tilt & piston mirror arrays as diffractive optical elements. Proceeding of SPIE, Bellingham, WA, 2005. 5894: p. 58940C-1-11. 9. Smith, N.R., et al., Agile wide-angle beam steering with electrowetting microprisms. Optics Express, 2006. 14: p. 6557-6563. 10. Davis, S.R., et al. Liquid Crystal Waveguides: New Devices Enabled by >1000 Waves of Optical Phase Control. in Emerging Liquid Crystal Technologies V, Proc. of SPIE Vol. 7618, 2010. 11. Ulrich, R., Optimum Excitation of Optical Surface Waves. Journal of the Optical Society of America, 1971. 61: p. 1467. 12. http://www.vescent.com/wpcontent/uploads/2011/07/vescent_2deo_scanners.wmv 5 2015