STEVAL-IDB008V1. Evaluation platform based on the BlueNRG-2. Description. Features

Similar documents
Bluetooth Low Energy USB dongle based on the SPBTLE-RF module. Description

AN4392 Application note

STEVAL-IFN003V1. DC PMSM FOC motor drive. Description. Features

Getting started with Bluetooth low energy expansion board based on BlueNRG for STM32 Nucleo

AN4378 Application note

EVALSTPM32. Single-phase energy metering evaluation board with shunt current sensor based on the STPM32. Description. Features

STEVAL-ISA192V1. 7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L. Description.

STEVAL-ISB038V1T. 1 W wearable wireless power transmitter based on STWBC-WA. Description. Features

EVAL6472H-DISC. L6472 Discovery: development tool to explore L6472 motor driver. Description. Features

Sub-1GHz transceiver development kit based on S2-LP. Description

BALF-NRG-01D3. 50 Ω nominal input / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter. Description. Features.

Obsolete Product(s) - Obsolete Product(s)

STEVAL-XPLM01CPL. Power line communication AC coupling circuit. Description. Features

STEVAL-SMACH15V1. 15 W 5 V output USB adapter evaluation board with STCH03 CC-mode primary sensing switching controller. Data brief.

STEVAL-IKR002V4B. SPIRIT1 - low data rate transceiver MHz - daughterboard integrated balun. Description. Features

AN4819 Application note

STEVALIPMnM2N. 100 W motor control power board based on STIPN2M50T-H SLLIMM nano IPM MOSFET. Data brief. Features. Description

STPTIC-15G2. Parascan tunable integrated capacitor. Description. Features. Applications. Benefit

ALTAIR05T W wide range CV-CC optoless adapter evaluation board

Qi A11 wireless charger transmitter evaluation board based on STWBC. Description

Wide input and wide output voltage LED driver with high power factor and low THD based on HVLED001A

VL53L1X-SATEL. Breakout boards based on the VL53L1X long distance ranging Time-of-Flight sensor. Data brief. Features. Description

AN5008 Application note

35 W wide input range flyback converter using HVLED001 quasi resonant flyback controller. Description

September 2012 Doc ID Rev 1 1/12

STEVAL-IPM08B. 800 W motor control power board based on STGIB8CH60TS-L SLLIMM 2nd series IPM. Data brief. Features. Description

50 Ω nominal input / conjugate match balun to ST S2-LP, MHz with integrated harmonic filter. Description

UM1589 User manual. M24LR-Discovery kit user guide. Introduction

BALF-NRG-01D3. 50 Ω / conjugate match to BlueNRG balun transformer and integrated filtering. Description. Features. Applications.

UM1082 User manual. The STPM10 single-phase meter evaluation boards. Introduction

Description. Table 1: Device summary Order code Package Packing STWLC33JR CSP (3.97x2.67 mm) 400 μm pitch 52 balls Tape and reel

Obsolete Product(s) - Obsolete Product(s)

Firmware plugin for STSW-ESC001V1 board with ST Motor Control FOC SDK

50 ohms / matched to ATSAMR21E18 balun transformer, with integrated harmonic filter

AN5029 Application note

AN5009 Application note

EVAL6235N. Demonstration board for L6235 DMOS driver for 3-phase brushless DC motor. Description. Features

Motor control power board based on the SLLIMM 2nd series of IGBT IPMs. Description

Motor control power board based on the SLLIMM-nano 2nd series. Description

60 W, digital 3-LED channel evaluation board with STNRG388Acontrolled current regulation and dimming. Description

STEVAL-TSP009V2. PoE 3.3 V - 6 A PD converter based on the PM8803 IEEE802.3at-compliant, synchronous flyback controller. Description.

STPTIC-15C4. Parascan tunable integrated capacitor. Datasheet. Features. Applications. Description DRAFT

EVAL6470H-DISC. dspin Discovery: development tool to explore dspin (L6470) motor driver. Description. Features

DSL04. Low capacitance TVS for high speed lines such as xdsl. Description. Features. Complies with the following standards

AN4630. PCB design guidelines for the BlueNRG and BlueNRG-MS devices. Application note. Introduction

I-NUCLEO-SX1272D. SX1272 LoRa technology and high-performance FSK/OOK RF transceiver modem. Features

35 W dimmable single string LED driver using HVLED001A and STF10LN80K5. Description

STPTIC-27C4. Parascan tunable integrated capacitor. Datasheet. Features. Applications. Description

STPTIC-82C4. Parascan tunable integrated capacitor. Datasheet. Features. Applications. Description

BALF D3. 50 ohm nominal input / conjugate match balun for STLC2690, with integrated harmonic filter. Description. Features.

AN4394 Application note

AN4949 Application note

STEVAL-ISA174V1. Data brief. Features. Description

ESDCANxx-2BLY. Automotive dual-line TVS in SOT23-3L for CAN bus. Datasheet. Features. Applications. Description

STEVAL-ISV013V W DC-DC solar module demonstration board for distributed photovoltaic architecture. Features. Description

STEVAL-IPM15B W motor control power board based on STGIB15CH60TS-L SLLIMM 2nd. series IPM. Data brief. Features. Description

50 ohm nominal input / conjugate match balun to SPIRIT1 434 MHz, with integrated harmonic filter. Digital interface

50 Ω nominal input / conjugate match balun to nrf51422-qfaa, nrf24le1, nrf51822-qfaa/ab, with integrated harmonic filter

AN4999 Application note

2STR1160. Low voltage fast-switching NPN power transistor. Features. Description. Applications

BAT30. Small signal Schottky diodes. Description. Features

AN4014 Application Note Adjustable LED blinking frequency using a potentiometer and STM8SVLDISCOVERY Application overview

STT7P2UH7. P-channel 20 V, Ω typ., 7 A STripFET H7 Power MOSFET in a SOT23-6L package. Applications. Description.

ESDLIN03-1BWY. Automotive single-line Transil, transient voltage suppressor (TVS) for LIN bus. Application. Description. Features

Table 1: Device summary Order code Marking Package Packing 2STR SOT-23 Tape and reel

Description. Table 1. Device summary. Order codes Output voltage

50 Ω nominal input / conjugate match balun to nrf51422-qfaa, nrf24le1, nrf51822-qfaa/ab, with integrated harmonic filter.

MLPF-WB55-01E GHz low pass filter matched to STM32WB55Cx/Rx. Datasheet. Features. Applications. Description

LD3985. Ultra low drop and low noise BiCMOS voltage regulators. Features. Description

EVAL-RHF310V1. EVAL-RHF310V1 evaluation board. Features. Description

ST W, 28 V RF Power LDMOS transistor from HF to 1.6 GHz. Datasheet. Features. Applications. Description

76-81GHz MMIC transceiver (4 RX / 3 TX) for automotive radar applications. Table 1. Device summary. Order code Package Packing

MP45DT02. MEMS audio sensor omnidirectional digital microphone. Description. Features. Applications

Description. consumption lower than 1 µa. The device also Input voltage from 2.4 to 5.5 V

AN5058 Application note

ST1S A, 1.5 MHz adjustable, step-down switching regulator. Description. Features

Very low drop and low noise BiCMOS 300 ma voltage regulator. Description. put a part of the board in standby, decreasing the 100 mv step

N-channel 30 V, 2.5 mω typ., 120 A STripFET H6 Power MOSFET in a TO-220 package. Features. Description

Features. Description. 2 (source) Table 1. Device summary. Order code Marking Base quantity Package Packaging. August 2014 DocID Rev 2 1/12

STEVAL-ISQ010V1. High-side current-sense amplifier demonstration board based on the TSC102. Features. Description

N-channel 60 V, Ω typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package. Features. Description. AM15810v1

AN2001 Application note

BAL-NRF02D3. 50 ohm nominal input / conjugate match balun to nrf51822-ceaa and nrf51422-ceaa. Features. Applications. Description.

ESDARF02-1BU2CK. Single-line bidirectional ESD protection for high speed interface. Features. Applications. Description

STEVAL-TDR001V1. 2 stage RF power amp: PD PD54003L-E + LPF N-channel enhancement-mode lateral MOSFETs. Feature. Description

AN4781 Application note

ESDCAN01-2BLY, ESDCAN24-2BLY

ULN2801A, ULN2802A, ULN2803A, ULN2804A

MP34DB02. MEMS audio sensor omnidirectional digital microphone. Description. Features. Applications

CPL-WBF-00D3. Wide band directional coupler with ISO port. Description. Features. Benefits. Applications

DB Evaluation board using PD85004 for 900 MHz 2-way radio. Features. Description

BALF-SPI-01D3. 50 ohm nominal input / conjugate match balun to Spirit1, with integrated harmonic filter. Features. Applications. Description.

Emergency lighting LED Voltage regulation SOT-89. Description. Order code Marking Package Packaging. 2STF SOT-89 Tape and reel

Features. Description. Table 1. Device summary. Order code Marking Package Packing. MJD32CT4-A MJD32C DPAK Tape and reel

STTH1R02-Y. Automotive ultrafast rectifier

STPS1150-Y. Automotive power Schottky rectifier. Datasheet. Features. Description

ULQ2801, ULQ2802, ULQ2803, ULQ2804

STEVAL-ISV003V1 250 W microinverter for plug-in PV panels demonstration board Features Description

50 ohm nominal input / conjugate match balun to nrf CEAA/CDAB/CFAC and nrf51422-ceaa/cdab/cfac. Description

STP4CMP. Low voltage 4-channel constant current LED driver with charge pump. Description. Features. Applications

Transcription:

STEVAL-IDB00V Evaluation platform based on the BlueNRG- Data brief Integrated balun which integrates a matching network and harmonics filter SMA connector for antenna or measuring equipment user LEDs user buttons D digital accelerometer and D digital gyroscope MEMS pressure sensor with embedded temperature sensor RoHS compliant Features Bluetooth SMART board based on the BlueNRG- Bluetooth low energy system on chip Associated BlueNRG- development kit SW package including firmware and documentation Up to + dbm available output power (at antenna connector) Excellent receiver sensitivity (- dbm) Very low power consumption:. ma RX and. ma TX at +0 dbm Bluetooth SMART specification compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature Description The STEVAL-IDB00V is an evaluation platform based on the BlueNRG-, low power Bluetooth smart system on chip with KB Flash, KB RAM, compliant with the Bluetooth SMART specification, supporting master, slave and simultaneous master-and-slave roles and Bluetooth low energy extended data length feature. The STEVAL-IDB00V also provides a set of hardware resources for implementing a wide range of application scenarios: sensor data (accelerometer, pressure and temperature sensor), remote control (buttons and LEDs) and debug message management though USB virtual COM. Three power options are available (USB only, battery only, external power supply + USB) for high application development and testing flexibility. June 0 DocID00 Rev / For further information contact your local STMicroelectronics sales office www.st.com

STEVAL-IDB00V Figure : STEVAL-IDB00V circuit schematic ( of ) JTAG Male Connector x0 HDR straight DIO0 JTMS-SWTDIO JTCK-SWTCK DIO RESETN CN 0 0 SWD RS - ST Link:.0-.V, V tolerant IAR J-Link:.-.V, V tolerant / DocID00 Rev

STEVAL-IDB00V CN Figure : STEVAL-IDB00V circuit schematic ( of ) ARDUINO CONNECTORS R 0_00 R 0_00 RESETN CN R 0_00 DIO 0 DIO 0_00 R R 0_00 DIO0 R 0_00 DIO 0_00 R DIO R 0_00 DIO DIO R0 0_00 R 0_00 DIO R 0_00 CN 0_00 R DIO TEST 0_00 RDIO R 0_00 DIO R 0_00 0_00 R ADC ADC R 0_00 R 0_00 CN RESETN DIO 0_00 R DIO R 0_00 DIO DIO0 R 0_00 R 0_00 DIO R0 0_00 DIO R 0_00 DIO R 0_00 DocID00 Rev /

JP TEST R 00k_00 Jumper C u_00 VBAT TXD DIO DIO IC_DAT IC_CLK JP Jumper C 00n_00 JTMS-SWTDIO JTCK-SWTCK DIO DIO VBAT DIO DIO DIO BlueNRG- C 00p_00 C u_00 U C u_00 DIO0 DIO DIO DIO DIO VBAT DIO DIO C C 0n_00 00n_00 Solder a 0u_00 between - or a 0R0_00 between - C 00n_00 D C0 u_00 VBAT SXTAL0 SXTAL RF0 RF VBAT FXTAL0 FXTAL 0 p_00 C p_00 VBAT C Q 00n_00 L TBD_00 Q XTAL_LS XTAL_HS C p_00 C U B B BALF-NRG-0D p_00 L TBD_00 TEST ADC A A C TBD_00 TEST ADC ADC L TBD_00 C TBD_00 J SMA connector Figure : STEVAL-IDB00V circuit schematic ( of ) STEVAL-IDB00V RESETN DIO DIO SPI_CS/RXD VBAT RESETN ADC RESETN SMPSFILT ADC SMPSFILT ANATEST V ANATEST0/DIO DIO DIO0 DIO DIO DIO DIO 0 TEST DIO TEST DIO DIO 0 DIO ADC ADC TEST DIO DIO0 DIO DIO DIO C DIO SPI_CLK SPI_CS SPI_OUT SPI_IN VBAT VBAT ADC / DocID00 Rev

STEVAL-IDB00V Figure : STEVAL-IDB00V circuit schematic ( of ) DocID00 Rev /

IO SDA SCL CS SPI_OUT SPI_CLK SPI_CS RES SDA SA0 0 Figure : STEVAL-IDB00V circuit schematic ( of ) STEVAL-IDB00V SENSORs C.u_00 C 00n_00 U C 00n_00 IC_CLK IO SCL R 0_00 R 0K_00 LPS HB INT _DRDY CS VBL UE C0 00n_00 IC_DAT R 0_00 0K_00 R VBL UE R 0_00 R 0_00 R 0_00 U LSM DS SPI_IN DIO R 0_00 R 0_00 SDO/ SA0 SDx SCx INT OCS INT 0 C 00n_00 C 00n_00 / DocID00 Rev

Gnd STEVAL-IDB00V Figure : STEVAL-IDB00V circuit schematic ( of ) POWER MANAGEMENT LDSPUR USB_V C u_00 Vin N.C. Vout Vinh Gnd Bypass C BATT Battery holder U n_00 JP C.u_00 JP Jumper 0_00 R Jumper DL GREEN Figure : STEVAL-IDB00V circuit schematic ( of ) JTAG FOR MICRO JTMS JTCK JTDO JTDI 0 CN CONN Male Connector x DocID00 Rev /

D S S D D S S D Figure : STEVAL-IDB00V circuit schematic ( of ) STEVAL-IDB00V USB USB_V R USBDP 0_00 R USBDM 0_00 U I/O SOT-L I/O VBUS I/O I/O USBLC-SC R DP DM C 00n_00 DM DP CN 0 Vcc D- D+ ID USB micro B Figure : STEVAL-IDB00V circuit schematic ( of ) TP TP TP V V V V Figure 0: STEVAL-IDB00V circuit schematic (0 of ) -SEL=-SEL=H => SPI CONNECTED TO THE BLUENRG- SPI_CS/RXD R -SEL=-SEL=L => SPI NOT 0_00 CONNECTED TO THE BLUENRG- SPI_CS R 0K_00 SPI_IN U R R 0K_00 0_00 S S -SEL Vcc C 0 -SEL -SEL -SEL 00n_00 R 0K_00 S S R SPI_CLK R 0_00 STG SPI_CLK R 0K_00 SPI_OUT R0 0_00 0K_00 SPI_OUT SPI_IN R 0K_00 / DocID00 Rev

RESETN RXD SPI_CS SPI_CLK SPI_OUT SPI_IN PB 0 PA PA PA PA PA PB0 PB PB PB0 PB VSS _ VSS_ PB PB BOOT0 PB PB PB PB PB PA PA 0 JTCK JTDI JTDO STEVAL-IDB00V MICRO VLCD OSC_IN OSC_OUT NRST A TXD Figure : STEVAL-IDB00V circuit schematic ( of ) U 0 VLCD PC RTC_AF-WKUP PC-OSC_IN PC-OSC_OUT PH0-OSC_IN PH-OSC_OUT NRST VSSA A PA0-WKUP PA PA _ VSS_ PA PA PA PA0 PA PA PB PB PB PB 0 JTMS USBDP USBDM USART_RX USART_TX -SEL -SEL OE DIO C C 0p_00 MHz 0p_00 X OSC_IN R M_00 OSC_OUT R 0K_00 NRST STMLCBU UFQFPN x package kbyte flash kbyte RAM JP USART_RX USART_TX USART VLCD C C C 00n_00 00n_00 00n_00 A C 00n_00 C u_00 C0 00n_00 C u_00 Figure : STEVAL-IDB00V circuit schematic ( of ) LEVEL TRANSLATOR TXD SPI_CS/RXD DIO R 0_00 R 0_00 R 0_00 0 U0 0 Vl Vcc RXD I/OVl I/OVcc I/OVcc I/OVl TXD I/OVl I/OVcc I/OVcc I/OVl I/OVl I/OVcc I/OVcc I/OVl PB I/OVl I/OVcc I/OVcc I/OVl OE Gnd OE STE R0 0k_00 DocID00 Rev /

Revision history STEVAL-IDB00V Revision history Table : Document revision history Date Version Changes -Jun-0 Initial release. 0/ DocID00 Rev

STEVAL-IDB00V IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. 0 STMicroelectronics All rights reserved DocID00 Rev /