Technique: rand: Piecing and Patchwork reespirit abric lizabeth Pillows Skill level: dvanced eginner abric esigned by Tula Pink Project by Heidi Pridemore Round bout This Way Up rafting time: Weekend Tula Pink s newest fabric collection is a fantasy adaptation about a dynamic queen based on the life of lizabeth of ngland. t s both quirky and elegant in a way that only Tula Pink can achieve! inished Size of ach Project: 20 x 20 (51cm x 51cm) reespirit lizabeth ollection by Tula Pink abric Requirements for Round bout Pillow: () PWTP068.TRTX () PWTP069.TRU () PWTP069.TRTX () PWTP064.TRTX () PWTP068.PLUMX () PWTP069.PLUMX (G) PWTP066.PLUMX (H) PWTP065.PLUMX () SSSS.WNT (White) 1 ⅛ yards (1.03m) abric Requirements for This Way Up Pillow: () PWTP065.TRTX () PWTP069.TRU () PWTP066.TRTX () PWTP063.TRTX () PWTP063.SYXX () PWTP067.SYXX (G) PWTP068.PLUMX (H) PWTP069.PLUMX () PWTP065.PLUMX (J) PWTP066.PLUMX () SSS.WNT (White) 1 yard (0.91m) dditional Requirements: Sewing Machine, Rotary cutter/mat/plastic ruler, ron/pressing board, asic sewing supplies and 1 yard (0.91m) of usible Web, (2) 20 x 20 (50.80cm x 50.80cm) pillow forms S0269 Page 1 of 6
lizabeth Pillows utting nstructions Note: WO - Width of abric, LO Length of fabric Round bout Pillow: abric, cut: (4) 3 x 5 ½ (7.62cm x 13.97cm) This Way Up Pillow: abric, cut: abric, cut: abric, cut: (5) 6 ½ x 6 ½ (16.51cm x 16.51cm) (16) 3 ½ x 3 ½ (8.89cm x 8.89cm) (2) 1 ½ x 18 ½ (3.81cm x 46.99cm) (2) 1 ½ x 20 ½ (3.81cm x 52.07cm) (2) 14 ½ x 20 ½ (36.83cm x 52.07cm) abric, cut: (4) 3 x 5 ½ (7.62cm x 13.97cm) abric, cut: abric, cut: (2) 3 x 5 ½ (7.62cm x 13.97cm) abric, cut: abric, cut: (2) 3 x 5 ½ (7.62cm x 13.97cm) abric, cut: (4) 3 ½ x 6 ½ (8.89cm x 16.51cm) abric, cut: abric, cut: (4) 3 ½ x 6 ½ (8.89cm x 16.51cm) abric, cut: abric G, cut: abric G, cut: abric H, cut: abric H, cut: abric, cut: abric, cut: (1) 15 ½ x 15 ½ (39.37cm x 39.37cm) (24) 3 x 3 (7.62cm x 7.62cm) (1) 5 ½ x 5 ½ (13.97cm x 13.97cm) (2) 14 ½ x 20 ½ (36.83cm x 52.07cm) abric J, cut: opyright 2014 oats PL S0269 Page 2 of 6
lizabeth Pillows Round bout Pillow - Sewing nstructions: 1. Place (1) 3 (7.62cm) abric square on the left side of (1) 3 x 5 ½ (7.62cm x 13.97cm) abric strip, right sides together (ig. 1). Sew across the diagonal of the square from the upper right corner to the lower left corner (ig. 1). lip open the triangle formed and press (ig. 2). Trim away the excess fabric from behind the triangle, leaving a ¼ (0.64cm) seam allowance. 4. Repeat Steps 1-2 using (4) 3 x 5 ½ (7.62cm x 13.97cm) abric strips and (8) 3 (7.62cm) abric squares to make (4) units (ig. 5). 9. Sew the four quarters of the circle together. 10. Refer to the pillow photo to arrange and press the circle onto the 15 ½ (13.97cm) abric square. 11. inish the raw edges of the circle with a decorative stitch such as a buttonhole or satin stitch to make the circle block. ig. 1 ig. 2 ig. 5 5. Repeat Steps 1-2 using (2) 3 x 5 ½ (7.62cm x 13.97cm) abric strips and (4) 3 (7.62cm) abric squares to make (2) units (ig. 6). 12. Sew the (12) flying geese units, the 5 ½ (13.97cm) abric square, and circle block together to make the pillow top (ig. 8). 2. Place another 3 (7.62cm) abric square on the right side of the 3 x 5 ½ (7.62cm x 13.97cm) abric strip, right sides together (ig. 3). Sew across the diagonal of the square from the upper left corner to the lower right corner (ig. 3). lip open the triangle formed and press (ig. 4). Trim away the excess fabric from behind the triangle, leaving a ¼ seam allowance to make (1) unit. ig. 3 ig. 4 3. Repeat Steps 1-2 to make (4) units total. 6. Repeat Steps 1-2 using (2) 3 x 5 ½ (7.62cm x 13.97cm) abric strips and (4) 3 (7.62cm) abric squares to make (2) units (ig. 7). make Make 2 make Make 2 ig. 6 ig. 7 7. ollowing the manufacturer s instructions, trace the listed number of each template onto the paper side of the fusible web. Roughly cut out each template about ⅛ (0.32cm) outside the drawn lines. 8. Press each template onto the wrong side of the fabrics as listed in utting nstructions. ut out each template on the drawn lines. ig. 8 G H opyright 2014 oats PL S0269 Page 3 of 6
lizabeth Pillows This Way Up Pillow - Sewing nstructions: 1. ollowing the manufacturer s instructions, trace the listed number of each template onto the paper side of the fusible web. Roughly cut out each template about ⅛ (0.32) outside the drawn lines. 2. Press each template onto the wrong side of the fabrics as listed in the utting nstructions. ut out each template on the drawn lines. 3. Refer to the quilt photo sew together the four quarters for each circle. 4. Press each circle onto (1) 6 ½ (16.51cm) abric square to make five circle blocks. 5. inish the raw edges of each circle with a decorative stitch such as a buttonhole or satin stitch to complete the blocks. 6. Place (1) 3 ½ (8.89cm) abric square on the left side of (1) 3 ½ x 6 ½ (8.89cm x 16.51cm) abric strip, right sides together (ig. 9). Sew across the diagonal of the square from the upper right corner to the lower left corner (ig. 9). lip open the triangle formed and press (ig. 10). Trim away the excess fabric from behind the triangle, leaving a ¼ (0.64cm) seam allowance. 7. Place another 3 ½ (8.89cm) abric square on the right side of the 3 ½ x 6 ½ (8.89cm x 16.51cm) abric strip, right sides together (ig. 11). Sew across the diagonal of the square from the upper left corner to the lower right corner (ig. 11). lip open the triangle formed and press (ig. 12). Trim away the excess fabric from behind the triangle, leaving a ¼ (0.64cm) seam allowance to make (1) unit. ig. 11 ig. 12 8. Repeat Steps 6-7 to make (4) units total. 9. Repeat Steps 6-7 using (4) 3 ½ x 6 ½ (8.89cm x 16.51cm) abric strips and (8) 3 ½ (8.89cm) abric squares to make (4) units (ig. 13). ig. 13 10. Sew the (5) ircles blocks, (4) units and (4) units together to make the pillow top (ig. 14). ig. 14 G H 11. Sew (1) 1 ½ x 18 ½ (3.81cm x 46.99cm) abric strip to each side of pillow top. Sew (1) 1 ½ x 20 ½ (3.81cm x 52.07cm) abric strip to the top and bottom of the pillow top. J ig. 9 ig. 10 opyright 2014 oats PL S0269 Page 4 of 6
lizabeth Pillows inishing for oth Pillows: 12. To make the back envelope flaps, turn under the 20 ½ (52.07cm) edge approximately ¼ (0.64cm), press and repeat to make a finished edge on one edge of the 14 ½ x 20 ½ (36.83cm x 52.07cm) abric (or ) piece. Repeat with the second 14 ½ x 20 ½ (36.83cm x 52.07cm) abric (or ) piece. 13. Position and pin the each back envelope flap, right sides together with the pillow front, overlapping the finished edges in the middle and aligning the raw edges with the pillow front (ig. 15). Stitch around the pillow front and back to complete the pillow. ig. 15 14. Turn the pillow right side out. 15. nsert pillow form to complete. opyright 2014 oats PL S0269 Page 5 of 6
lizabeth Pillows Template One for Round bout Pillow Template Two for This Way Up Pillow opyright 2014 oats PL S0269 Page 6 of 6