room essentials Nightstand DCPI # 249-05 - 0101 (Black Woodgrain) DCPI # 249-05 - 0104 (Espresso) DCPI # 249-05 - 0107 (Natural) DCPI # 249-05 - 0110 (White) >> assembly instructions 92331 F ROOM ESSENTIALS TM
1-855-698-4846 2 2
Congratulations on your latest Target purchase Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your room in no time. Good luck - though we're confident you won't need it. before you begin 1. Check for damaged or missing parts. Please call 1-855-MYTGTHOME (855-698-4846) for parts and service. Please reference DPCI# 249-05 - 0101 (Black Woodgrain) 249-05 - 0104 (Espresso) 249-05 - 0107 (Natural) 249-05 - 0110 (White) 3. Use the carton as a worksurface to prevent product damage during assembly. Gather all tools prior to assembly. tools needed 3
table of contents customer service information 2 introduction 3 hardware 5-6 parts list 7 how to use the cam lock system 8 assembly 9-25 specification sheet 26 questionnaire 27 information sheet 28 products available 29 QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DCPI number ready when calling. 4
hardware 10401 10815 12754 13414 20209 x8 x6 x4 x10 panel clips screw cover Rectangular foot corner bracket dowel pin 25233 25259 25266 25610 26020 x4 x8 x10 x4 short flat head screw flat head screw long flat head screw connector bolt 1/4" screw 26214 31631 31643 22604 x4 x1 machine screw small cam large cam glue 5
hardware 31513 x6 cam bolt 41407 drawer glide 88042 x1 Drawer Tip Warning Label 97642 x1 allen wrench 6
ITEM DESCRIPTION QUANTITY 00264 right drawer side 1 00265 left drawer side 1 02608 drawer back 1 07530 drawer bottom 1 08852 back panel 1 18025 base sides 2 E drawer front 1 I bottom panel 1 JA base rail 1 L top panel 1 P top rail 1 F left end panel 1 H right end panel 1 00265 02608 07530 E 00264 F 18025 P JA I L H 08852 18025 7
how to use the cam lock system 1 2 3 180 4 5 6 CORRECT NOT CORRECT 8
step 1 drawer assembly - Add glue to drawer sides left drawer side 22604 00265 x1 glue 1. Place 3 drops of glue in each hole at the back of the drawers. Use the tip of the glue bottle to spread glue to the sides of the holes. Paper overlays the slot, but it has a slit so drawer bottom inserts well. right drawer side 00264 paper 9
step 2 drawer assembly - insert cam bolts and glue 31513 22604 x1 glue 1. cam bolt Screw cam bolts into the drawer front. Cam bolts must be screwed down flush. Place 3 drops of glue into each of the remaining holes in the drawer front. Use the tip of the glue bottle to spread glue to the sides of the holes. E drawer front 10
step 3 drawer assembly - attach drawer bottom to back 02608 07530 paper 1. Press the drawer bottom (with the finished side up) into the grooves on the drawer back. Paper overlays the slot, but it has a slit so drawer bottom inserts well. finish side up 11
step 4 drawer assembly - attach drawer sides, drawer front and insert drawer cams 88042 NOT CORRECT 00264 CORRECT 02608 07530 31631 88042 x1 E small cam 00265 Drawer Tip Warning Label 1. 3. 4. 5. Place cams in large holes so that the arrow on cam faces the edge of the panel. Press drawer sides firmly onto the drawer back. Place the cam bolts that are attached to the drawer front into the holes on the drawer sides. Make sure the drawer bottom is completely inserted into the grooves in the drawer front and drawer back, then tighten the cams. Apply Drawer Tip Warning Label to the inside of the drawer. 12
step 5 case assembly - insert dowel pins 20209 22604 P x1 dowel pin glue 1. Place 3 drops of glue in each dowel pins hole. Use the tip of the glue bottle to spread glue to the sides of the holes. Press the dowel pins into the large holes on the edge of the top rail. 13
step 6 case assembly - insert cams and dowel pins CORRECT NOT CORRECT 20209 31643 x4 dowel pin large cam 1. 3. Tap the dowel pins into the larger holes at the top and bottom edges of the left end panel. Place the large cam into the holes on the left end panel. Make sure the arrow on the cam is toward the edge of the panel. F 14
step 7 case assembly - attach drawer glides. front of glide front screw location back screw location top F 26020 41407 x1 front (finished edge) 1/4" screw 1. 3. 4. 5. 6. drawer glide Fully extend drawer glides to the front. Place 1/4" screw through the correct hole for the back of the drawer slide. Tighten screw but do not over tighten. Close slide until the front hole is visible through the oval slot on the glide. Place 1/4" screw through the hole in the slot. Tighten screw but do not over tighten. back bottom 15
step 8 case assembly - insert cams and dowel pins CORRECT NOT CORRECT 20209 31643 x4 dowel pin large cam 1. 3. Tap the dowel pins into the larger holes at the top and bottom edges of the right end panel. Place the large cam into the holes on the right end panel. Make sure the arrow on the cam is toward the edge of the panel. H 16
step 9 case assembly - attach drawer glides. back screw location front screw location front of glide top H 26020 41407 x1 back 1/4" screw 1. 3. 4. 5. drawer glide 6. Fully extend drawer glides to the front. Place 1/4" screw through the correct hole for the back of the drawer slide. Tighten screw but do not over tighten. Close slide until the front hole is visible through the oval slot on the glide. Place 1/4" screw through the hole in the slot. Tighten screw but do not over tighten. front (finished edge) bottom 17
step 10 base assembly 18025 JA 10815 13414 25233 25610 97642 x1 screw cover corner bracket short flat head screw connector bolt 1. 3. Use the short flat head screws to attach the short side of the corner brackets to the base rail. allen wrench Use allen wrench and connector bolts to attach the base sides to the base rail. Press screw covers onto the heads of the connector bolts. 18025 18
step 11 case assembly - attach bottom panel to base finished surface up I finished front edge of base rail 10815 x4 25233 25610 x4 97642 JA x1 18025 screw cover short flat head screw connector bolt Allen wrench 1. 3. 4. Place the bottom panel over the base assembly with the finished side facing up. Use the allen wrench to install the connector bolts. Press screw covers onto the heads of the connector bolts. Turn assembly upside down to install the two screws for the corner brackets. finished front edge 18025 19
step 12 case assembly - attach top rail P L 31513 25266 finished front edge x4 long flat head screw 1. cam bolt 3. Screw the cam bolts into the top panel. Cam bolts must be screwed down flush. Place long flat head screws through holes on top rail. Make sure the finished side of the rail is facing the front. Line up dowel pins with the holes in the top panel, then tighten screws. 20 finished front edge
step 13 case assembly - attach side panels to top assembly 1. 3. 4. Place left and right end panels onto top panel as shown. Make sure the grooves and cam locks are placed as shown on the drawing. Make sure the finished front edges are facing up. Tighten cams. 21
1. 3. 4. step 14 case assembly - attach back panel and bottom L F 08852 25610 x4 97642 I x1 connector bolt Allen wrench Insert the back panel in the grooves at the bottom of the side panels. Unfold and slide the back panel all the way into the grooves including the groove on the top panel. Line up the holes in the bottom panel with the dowels on the bottom of the side panels. Place connector bolts into the holes on the bottom and use allen wrench to tighten. 08852 22
step 15 case assembly - attach rectangular feet front edge F L I 12754 25259 x4 x8 rectangular foot flat head screw 1. Place rectangular foot on the bottom of the base side 1/8" from the end and centered on the width of the base side. Drill holes for the attachment of feet. Use the holes in the foot to find locations for drilling 1/8" diameter pilot holes for screw attachment. 3. Insert 2 screws through the foot into the base side. 4. Repeat step 1 to 3 for the locations of the other 3 feet. IMPORTANT: When placing this unit on thick carpet, the addition of 4 rectangular feet is required to improve stability. For floors with a hard surface or low pile carpeting, the additional feet are not necessary. finished front edge H 23 max. 1/8"
step 16 case assembly - attach back panel clips 4" 90 10401 x8 I F 90 08852 L H 24 4" 1. panel clips Place back panel clips as shown and press the thin tabs between the back panel and the groove. Tighten the screws but be careful not to over tighten.
step 17 case assembly - install drawer into case E 26214 machine screw 1. 3. 4. Slide groove on drawer sides over the drawer glide. Pull the slide forward until the threaded hole on the glide aligns with the hole in the drawer side. Attach glide screw from inside the drawer box into the drawer glide. Second hole on drawer slide is not used. I L H 25
specification sheet 3 YEAR WARRANTY: All Tvilum-Scanbirk furniture is warranted to the original purchaser at the time of purchase and for 3 years after the purchase date. We warrant to you, the original purchaser, that our furniture and all furniture parts and components are free of defects in material or workmanship. The word defects as used in this warranty is defined as any imperfections which impair the use of the furniture. Our warranty is expressly limited to the replacement or repair of furniture parts and components and Tvilum-Scanbirk will have a reasonable amount of time to remedy said defect. This warranty applies under conditions of normal use. The warranty does not cover defects caused by improper assembly or disassembly defects occurring after purchase due to intentional damage, product modifications, exposure to the elements, accidents, misuse, abuse or negligence and labor or assembly costs. 18 kg 40 lbs All implied warranties, including the warranty of merchantability shall not extend beyond the duration of the written warranty stated above. Tvilum-Scanbirk liability is expressly limited to the costs of material for repair or replacement of defective goods and in no event will Tvilum- Scanbirk be liable for incidental or consequential damages resulting from use of the product. Some states do not allow limitations on how long an implied warranty may last or the exclusions or limitations of incidental or consequential damages, so the above limitations and exclusions may not apply to you. 6 kg 13 lbs This warranty gives you specific legal rights which may vary from state to state. Any claims made under this warranty must be presented in writing to: d-scan 2195 Philpott Road P.O. Box 1067 South Boston, VA 24592 26
27
Made in Denmark TVILUM-SCANBIRK CARB 93.120 Phase 2 This product will ensure you: A better indoor climate The product has been tested FREE from several harmful substances and is CARB phase 2 compliant Wood from sustainable forestry The product is PEFC-certified Safe furniture for use in your home The product has been safety tested and approved Read more at www.tvilum-scanbirk.com 28
products available nightstand tv-stand with sliding door 4 drawer dresser tv-stand with doors 6 drawer dresser 29
30
31
ROOM ESSENTIALS TM