Project: Comments: Prepared By: Tunable, fixture produces a wide range of 9+ CRI/ R9 whites from 14K-1,K, as well as pastels and saturated colors Closed-loop color point maintenance to <1 MacAdam ellipse over lifetime and temperature Integrated temperature protection maintains safe operating conditions Wirelessly dimmable to.1% On-board wireless control enables individual addressability and control Shallow Deep HARDWARE ORDERING GUIDE Shallow Pinhole Deep Pinhole TRIM HOUSING FXSQ BT NCIC SP Model Trim Color Trim Fixture/ Trim Platform/ Control Beam Angle Voltage/ Region Housing Type Optic Shipping Option Model Square Shallow Bevel Square Deep Bevel Square Shallow Pinhole Square Deep Pinhole TFSQ1 TFSQ2 TFSP1 TFSP2 Fixture and Trim Fixed, Square FXSQ 9 Watts 9 13 Watts 13 18 Watts 18 Voltage & Region 12VAC 6Hz, North America 11 277VAC 6Hz, North America 12 Housing Type New Construction, IC/Airtight NCIC Trim Color White WH Black BK Trim 1 2 (See diagram on page 3) None N Solite Lens S Frost Lens F Platform & Control Wide Gamut, Tunable Beam Angle Spot (15 ) Low Glare Flood (25 ) Low Glare Wide Flood (4 ) Low Glare Very Wide Flood (6 ) Low Glare Spot (15 ) High Output Flood (25 ) High Output Wide Flood (4 ) High Output Very Wide Flood (6 ) High Output BT 15L 25L 4L 6L 15H 25H 4H 6H Optic 2 (See diagram on page 3) None N Solite S Frost Lens F Hex Louver H Shipping Option Single Pack (Default, ships with Butterfly Brackets & 24 Nailer Bars to be installed in field) SP 1 Downlight is wet location rated when trim is installed with lens. 2 Either an optic accessory or a trim accessory may be used at a time. They cannot be used simultaneously. Designed in Austin, TX 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved
SPECIFICATIONS1 OPTICAL & ELECTRICAL PERFORMANCE ENVIRONMENTAL Lumen Output2 Beam Angle (1'' recess) 9W 13W 18W Pinhole lm multiplier 15 beam, low glare 65lm 882lm 192lm.57 25 beam, low glare 623lm 845lm 146lm.48 4 beam, low glare 569lm 772lm 955lm.61 6 beam, low glare 561lm 76lm 941lm.6 15 beam, high output 682lm 928lm 1148lm.62 25 beam, high output 678lm 923lm 1142lm.48 4 beam, high output 646lm 878lm 187lm.54 6 beam, high output 63lm 857lm 161lm.55 CRI (Ra) Lumen Maintenance 3 Color Spatial Uniformity Color Point Range 4 Equivalent Traditional Lamp Dimming Range 4 Power consumption Voltage Power Factor >.9 Current Efficacy >9 (R9>9) 5, hours to L7 @ 25 C T A <2 MacAdam ellipses across field angle 14 K 1, K, Fully Saturated, & Pastel 75W halogen.1 1% lm.9 9W.13 13W.18 18W 12VAC 6Hz 277VAC 6Hz 82mA Max Beam Angle (1'' recess) 9W 13W 18W 15 beam, low glare 72lm/W 68lm/W 61lm/W 25 beam, low glare 69lm/W 65lm/W 58lm/W 4 beam, low glare 63lm/W 59lm/W 53lm/W 6 beam, low glare 62lm/W 58lm/W 52lm/W 15 beam, high output 76lm/W 71lm/W 63lm/W 25 beam, high output 75lm/W 71lm/W 62lm/W 4 beam, high output 72lm/W 68lm/W 59lm/W 6 beam, high output 7lm/W 66lm/W 58lm/W Operating Temperature (T A ) - 4 C Storage Temperature -2-8 C Humidity Certification Location MECHANICAL Mounting Options Field Replaceable Optics Field Replaceable Light Engine Field Replaceable Power Supply Additional Optic Lens Additional Trim Lens Housing Material Lens Material DIMENSIONS - 95%, Non-condensing UL, cul, 12V: FCC Class B, 277V: FCC Class A UL Damp Location, UL Wet Location Available with Trim Lens Hanger Bars/ Butterfly Brackets Yes Yes Yes Ceiling Square Cut-out 4" 2.5" Lens, 1/8" Thick 2.75" Lens, 1/8" Thick Powder Coated Steel, Polymer Glass Trim Outside Dimension Trim Inside Dimension Trim Thickness 1/16" Optics Outside Dimension 2.5 Trim Depth 1", 2" 2.84" Bevel 1.77" Pinhole Ceiling Thickness.625" 1.5" Emitter Vertical Adjustment (tool-free) Housing Vertical Adjustment via Butterfly Bracket Service Position.75" 1.75" Housing Height 3.5" Housing Length 18.38" Housing Width 1" Tilt to 4 Full 364 Rotation Surge Protection Control Protocol 2.5KV KetraNet Mesh 1 All performance measurements taken with 1 trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated. 2 Lumen measurement complies with IES LM-79-8 testing procedures. 3 Lumen maintenance values calculated in accordance to TM-21 procedures based on LM-8 compliant measurement data. 4 Intensity and color point controlled via Ketra s wireless network. Designed in Austin, TX 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved
COMPONENT ORDERING GUIDE REPLACEMENT OPTICS ACCESSORIES MOUNTING KITS OP MA Type Recessed Downlight Beam Angle Recessed Downlight Type Recessed Downlight Mounting Type Optic Beam Angle Spot (15 ) Low Glare Flood (25 ) Low Glare Wide Flood (4 ) Low Glare Very Wide Flood (6 ) Low Glare Spot (15 ) High Output Flood (25 ) High Output Wide Flood (4 ) High Output Very Wide Flood (6 ) High Output OP 15L 25L 4L 6L 15H 25H 4H 6H Trim Lens, Square Bevel, Solite Trim Lens, Square Bevel, Frost Trim Lens, Pinhole, Solite Trim Lens, Pinhole, Frost Optic Solite Optic Frost Optic Hex Louver TLSQFS TLSQFF TLPINS TLPINF OAS OAF OAH Type Mounting Mounting Note: Downlight is wet location rated when trim is installed with lens. Note: Only one optional optical or trim accessory can be used at a time. MA (2) Butterfly Brackets B (2) 24 (6.9cm) Nailer Bar N LENS ACCESSORY PLACEMENT EMITTER HEAT SINK OPTIC HOUSING OPTIC ACCESSORY OR TRIM LENS CEILING TRIM Designed in Austin, TX 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved
THE INFORMATION CONTAINED IN THIS SQUARE BOX FIXED, SQUARE DIMENSION DRAWINGS HOUSING.89" [22.5mm] ALL KNOCKOUTS 3.5" [89.mm] 3.9" [78.5mm].63" [16.mm] 6.37" [162.mm] 4.5" [13.mm] 1.7" [256. mm] 18.38" [467.mm] PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KETRA, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT PROPRIETARY THE WRITTEN PERMISSION OF KETRA, INC. IS PROHIBITED. DRAWING IS THE SOLE PROPERTY OF KETRA, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KETRA, INC. IS PROHIBITED. Designed in Austin, TX 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved
WALL WASH FLANGED FLANGED PINHOLE FLAN FIXED, SQUARE DIMENSION DRAWINGS BEVEL TRIM SQUARE PROFILE TRIMS SHALLOW BEVEL 3815 S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX 7874 P: 512.872.4349 FLANGED 1.8" [27.5 mm] PINHOLE FLANGED SQUARE PROFILE TRIMS SQUARE PROFILE TRIMS 2.84" FLANGED [72.1mm] PINHOLE FLANGED 3815 S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX 7874 P: 512.872.4349 3815 S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX 7874 P: 512.872.4349 FLANGED DEEP BEVEL PINHOLE FLANGED Ceiling Hole Dimension 4" [11.6 mm] 1.85" [46.9 mm] PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KETRA, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KETRA, INC. IS PROHIBITED. PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KETRA, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KETRA, INC. IS PROHIBITED. PINHOLE TRIM FOR REFERENCE ONLY NOT FOR CONSTRUCTION DRAWING TYPE: 6 DRAWING #: PINHOLE FLANGED 1.77" [45. mm] 3815 S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX 7874 P: 512.872.4349 1.2" [3.5 mm] SHALLOW PINHOLE SCALE: NTS FOR REFERENCE ONLY NOT FOR CONSTRUCTION SHEET NAME - PRODUCT DRAWING FOR DOCUMENT TYPE: REFERENCE 6 DRAWING ONLY DRAWING #: NOT FOR CONSTRUCTION REVISION #: 1 DATE: REVISION #: DRAWN BY: 11/7/216 DRAWN DRAWING BY: TYPE: SC, CEH 6 CHECKED DRAWING BY: #: GEB SCALE: REVISION NTS #: DATE: DATE: CHECKED BY: DRAWN BY: 1 1 11/7/216 11/7/216 SC, CEH GEB SHEET 7 OF 8 SHEET SC, CEHNAME DEEP PINHOLE CHECKED BY: GEB - PRODUCT SCALE: NTS DOCUMENT DRAWING SHEET NAME Ceiling Hole Dimension 4" [11.6 mm] 2.2" [55.9 mm] - SHEET PRODUCT DOCUMENT DRAWING 7 OF 8 SHEET 7 OF 8 FOR REFERENCE ONLY NOT FOR CONSTRUCTION DRAWING TYPE: 6 DRAWING #: Designed in Austin, TX REVISION #: 1 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved DATE: 11/7/216 DRAWN BY: SC, CEH CHECKED BY: GEB SCALE: NTS
ISO FOOTCANDLE CHARTS: 27-5K VALUES ONLY, DELIVERED LUMENS LM-79 compliant IES files available upon request. BEAM ANGLE: 15 SPOT, LOW GLARE BEAM ANGLE: 15 SPOT, HIGH OUTPUT FXSQ18BT15L 18W 192 763 FXSQ18BT15H 18W 1148 9279 211 6 1.5 258 6 1.5 119 2.11 145 2.11 76 2.63 93 2.63 53 3.16 64 3.16 39 3.69 47 3.69 191 381 572 763 232 4638 6959 9279 8 8 6 6 4 4 2 2 BEAM ANGLE: 25 SPOT, LOW GLARE BEAM ANGLE: 25 SPOT, HIGH OUTPUT FXSQ18BT25L 18W 146 4198 FXSQ18BT25H 18W 1142 4297 117 6 2.66 119 6 2.66 66 3.55 67 3.55 42 4.43 43 4.43 29 5.32 3 5.32 21 6.21 22 6.21 15 289 3149 4198 174 2149 3228 4297 8 8 6 6 4 2 4 2 1 All performance measurements taken with 1 trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated. Designed in Austin, TX 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved
ISO FOOTCANDLE CHARTS: 27-5K VALUES ONLY, DELIVERED LUMENS LM-79 compliant IES files available upon request. BEAM ANGLE: 4 WIDE FLOOD, LOW GLARE FXSQ18BT4L 18W 955 241 BEAM ANGLE: 4 WIDE FLOOD, HIGH OUTPUT FXSQ18BT4H 18W 187 217 57 6 4.37 6 6 4.37 32 5.82 34 5.82 2 7.2 22 7.2 14 8.74 15 8.74 1 1.19 11 1.19 51 121 1531 241 543 185 1628 217 8 8 6 6 4 2 4 2 BEAM ANGLE: 6 VERY WIDE FLOOD, LOW GLARE FXSQ18BT6L 18W 941 1235 BEAM ANGLE: 6 VERY WIDE FLOOD, HIGH OUTPUT Product 1 FXSQ18BT6H 18W 161 1257 34 6 6.93 35 6 6.93 19 9.24 2 9.24 12 11.55 13 11.55 9 13.86 9 13.86 6 16.17 6 16.17 39 617 926 1235 314 628 943 1257 8 8 6 6 4 2 4 2 1 All performance measurements taken with 1 trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated. Designed in Austin, TX 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved
WIDE GAMUT.9.8.7.6 y 52 CIE 1931 Color Chart 54 56 Green:.256,.6 Ketra s tunable spectrum downlight can easily be configured via Ketra s intuitive Design Studio software. The product can reproduce any color point within the triangle shaped gamut indicated in the chart below. With Ketra s innovative optical and thermal feedback system, the color point is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of the product and across operating temperature range.5 5 Green 58 Red:.681,.37.4.3.2.1. 48 48 47 46 Blue 36 Black Body..1.2.3.4 6 62 Red 7 Blue:.17,.11 x.5.6.7.8 Calibrated Gamut: color point is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of the product and across operating temperature range Expanded Gamut: Color calibration is relaxed such that each product produces the most saturated color it is capable of. GENERAL SPECIFICATIONS LED downlight shall employ closed loop optical and thermal feedback capable of maintaining color point accuracy of <1 MacAdam ellipse. LED downlight shall have color spatial uniformity of <2 MacAdam ellipses over full field angle. LED downlight shall have an integrated wireless control onboard. LED downlight shall be capable of a CRI >9 along the Black Body Curve from 27-5K. LED downlight lamp shall be a single source multi-die emitter consisting of both monochromatic and phosphor converted blue LED dye. LED downlight shall be sealed, meeting UL damp location (and UL Wet Location with Wet Location Trim) requirements. LED downlight shall be dimmable to.1% of measured luminous flux with wireless dimming. LED downlight shall be UL listed and RoHS compliant. LED downlight shall be capable of in situ firmware and software upgrades. Ketra LED Fixtures are warrantied to be free from material defects in material and workmanship for five (5) years or 25, hours from date of shipment, whichever is less. LED Fixture shall be # Designed in Austin, TX 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved
TROUBLESHOOTING The uses built-in tests to check wiring and wireless connectivity. These tests run each time the turns on, and may take several minutes. Note: The will NOT run these tests while provisioned to a Design Studio installation. If the finds a problem, it will let you know by emitting a corresponding color or, if no emitter is connected, by flashing the indicator lights on its power supply. DIAGNOSTIC COLORS (REQUIRES EMITTER) The will emit a color to tell you the type of problem. COLOR CONDITION CORRECTION Red Invalid input voltage on the power line Ensure the input voltage matches the expected voltage for the s model. Magenta Poor wireless connectivity Ensure that the is notin a metal enclosure and that there are no significant obstructions between the and other Ketra devices. Note: In some circumstances, magenta is expected. See the note below the table. Yellow Fair wireless connectivity Ensure that the is not in a metal enclosure and that there are no significant obstructions between the and other Ketra devices. Designed in Austin, TX 512-347-11 ketra.com 218 Ketra, Inc. All rights reserved