Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 00000000 3W Constant Voltage Constant Current LED Driver HLG3H series IP65 IP67 Metal housing with class I design Builtin active PFC function Ⅰ current output. HLG3H operates from ~305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for 40 ~ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG3H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. I I B C D File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series SPECIFICATION MODEL OUTPUT INPUT OTHERS HLG3H12 HLG3H15 HLG3H HLG3H24 HLG3H30 HLG3H36 HLG3H42 HLG3H48 DC VOLTAGE 12V 15V V 24V 30V 36V 42V 48V CONSTANT CURRENT REGION Note.4 6 ~12V 7.5 ~ 15V 10 ~ V 12 ~ 24V 15 ~ 30V 18 ~ 36V 21 ~ 42V 24 ~ 48V RATED CURRENT RATED POWER 22A 264W 19A 285W 15A 300W 13.34A 3.16W 10.7A 321W 8.9A 3.4W 7.65A 321.3W 6.7A 321.6W RIPPLE & NOISE (max.) Note.2 150mVpp 150mVpp 150mVpp 150mVpp 0mVpp 250mVpp 250mVpp 250mVpp VOLTAGE ADJ. RANGE Adjustable for A/CType only (via builtin potentiometer) 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 21 ~ 26V 26 ~ 32V 32 ~ 39V 38 ~ 45V 43 ~ 52V CURRENT ADJ. RANGE Adjustable for A/CType only (via builtin potentiometer) 11 ~ 22A 9.5 ~ 19A 7.5 ~ 15A 6.67 ~ 13.34A 5.35 ~ 10.7A 4.45 ~ 8.9A 3.8 ~ 7.65A 3.35 ~ 6.7A VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME Note.6 2500ms,80ms/115VAC 500ms,80ms/230VAC HOLD UP TIME (Typ.) 15ms / 115VAC, 230VAC VOLTAGE RANGE Note.5 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) EFFICIENCY (Typ.) (230Vac) EFFICIENCY (Typ.) (277Vac) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) 91% 92.5% 93.5% 94% 94% 91.5% 93% 94% 94.5% 94.5% 3.5A / 115VAC 1.65A / 230VAC 1.45A / 277VAC LEAKAGE CURRENT <0.75mA / 277VAC OVER CURRENT Note.4 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTION 14 ~ 17V 17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V 33 ~ 37V OVER VOLTAGE Shut down and lah off o/p voltage, repower on to recover 40 ~ 46V 46.5 ~ 53V 53.5 ~ 60V 59 ~ 65V OVER TEMPERATURE Shut down and lah off o/p voltage, repower on to recover WORKING TEMP. MAX. CASE TEMP. Tcase= 40 ~ (Please refer to "OUTPUT LOAD vs TEMPERATURE" section) Tcase= ENVIRONMENT WORKING HUMIDITY ~ RH noncondensing STORAGE TEMP., HUMIDITY 40 ~ 80, 10 ~ RH TEMP. COEFFICIENT VIBRATION ± 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.8 UL8750 (type HL ), CSA C22.2 No. 250.008; TUV EN613471, EN61347213 independent ; IP65 or IP67 (except for HLG3H Ctype) ; J613471, J61347213 (except for HLG3H Ctype) approved SAFETY & EMC NOTE TOTAL HARMONIC DISTORTION MAX. No. of PSUs on 16A CIRCUIT BREAKER WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION PF 0.98/115VAC, PF 0.95/230VAC, PF 0.94/277VAC @ full load (Please refer to " POWER FACTOR (PF) CHARACTERISTIC" section) THD< % (@ load 50% / 115VAC,230VAC; @ load 75% / 277VAC) (Please refer to " TOTAL HARMONIC DISTORTION (THD)" section) Note.8 Compliance to EN55015, EN55022 (CISPR22) Class B, EN6100032 Class C (@ load 50% ) ; EN6100033 EMC IMMUNITY Compliance to EN6100042,3,4,5,6,8,11, EN61547, EN55024, light industry level ( surge immunity LineEarth 4KV, LineLine 2KV) MTBF 157.1K hrs min. MILHDBK217F (25 ) DIMENSION 252**43.8mm (L*W*H) PACKING 1.88Kg; 8pcs/16Kg/0.92CUFT 94.5% COLD START 70A(t width=1010 μs measured at 50% I peak) at 230VAC; Per NEMA 410 1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC I/PO/P:3.75KVAC I/PFG:2KVAC O/PFG:1.5KVAC I/PO/P, I/PFG, O/PFG:100M Ohms / 500VDC / 25 / 70% RH HLG3H54 54V 27 ~ 54V 5.95A 321.3W 350mVpp 49 ~ 58V 2.97 ~ 5.95A ±1.0% ±0.5% ±0.5% File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series BLOCK DIAGRAM Fosc : 65KHz I/P FG EMI FILTER & RECTIFIERS PFC CIRCUIT PFC CONTROL O.L.P. POWER SWITCHING PWM & PFC CONTROL RECTIFIERS & FILTER O.L.P. DETECTION CIRCUIT O.V.P. V V DIM DIM (B Type) DRIVING METHODS OF LED MODULE This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. 100 In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Vo(%) (A) Constant Voltage area (B) Constant Current area Should there be any compatibility issues, please contact MEAN WELL. 50 (min.) (C) Hiccup Protection 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series DIMMING OPERATION FG (Green/Yellow) AC/L(Brown) AC/N(Blue) HLG3H DIM(Blue) DIM(White) V(Red) V(Black) 3 in 1 dimming function (for BType) Output constant current level can be adjusted by applying one of the three methodologies between DIM and DIM: 1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100μA (typ.) Applying additive 1 ~ 10VDC V V DIM DO NOT connect "DIM to V" Additive Voltage Output current (%) 100% % 80% 70% 60% 50% 40% 30% % 10% 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage DIM Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): V V DIM Additive PWM signal DIM DO NOT connect "DIM to V" Output current (%) 100% % 80% 70% 60% 50% 40% 30% % 10% 10% % 30% 40% 50% 60% 70% 80% % 100% Duty cycle of additive 10V PWM signal dimming input Applying additive resistance: V V DIM DIM Additive Resistance Output current (%) 100% % 80% 70% 60% 50% 40% 30% DO NOT connect "DIM to V" % 10% 10K/N K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N K/N 100K/N (N=driver quantity for synchronized dimming operation) Dimming input: Additive resistance File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options. N FG L Relay Swih Adjuster 10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L AC/N HLG3H BType DIM DIM V() V() Blue White Black Red LED Lighting Fixture Using a swih and relay can turn ON/OFF the lighting fixture. File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series OUTPUT LOAD vs TEMPERATURE 100 230VAC 100 80 80 60 110VAC 60 LOAD (%) 40 LOAD (%) 40 40 25 10 0 15 30 50 60 70 (HORIZONTAL) 40 25 0 45 55 65 75 (HORIZONTAL) AMBIENT TEMPERATURE,Ta ( ) Tcase ( ) STATIC CHARACTERISTICS POWER FACTOR(PF) CHARACTERISTIC Tcase at 80 LOAD (%) 100 80 70 60 50 40 100 125 135 145 155 165 175 180 0 230 305 PF 1 0.98 0.96 0.94 0.92 0.9 0.88 0.86 0.84 Constant Current Mode 277VAC 230VAC 115VAC INPUT VOLTAGE (V) 60Hz 50% 60% 70% 80% % 100% (3W) LOAD Derating is needed under low input voltage. THD(%) TOTAL HARMONIC DISTORTION (THD) 48V Model, Tcase at 80 16 14 12 10 8 6 4 2 0 50% 60% 70% 80% % 100% 277VAC 230VAC 115VAC EFFICIENCY (%) EFFICIENCY vs LOAD HLG3H series possess superior working efficiency that up to can be reached in field applications. 48V Model, Tcase at 80 97 95 93 91 89 87 85 83 81 79 77 75 10% % 30% 40% 50% 60% 70% 80% % 100% 277VAC 230VAC 115VAC LOAD LOAD File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series LIFETIME 1 100 80 LIFETIME(Kh) 60 40 0 30 40 50 60 70 80 Tc a s e ( ) File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series MECHANICAL SPECIFICATION Blank/DType Case No.2A Unit:mm 13.4 8.9 252 225.2 17 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) AType FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJTW 18AWG 3C SJTW 18AWG 3C 17 13.4 8.9 17 40 17 40 45 : Max. Case Temperature 252 225.2 45 112.6 112.6 Io Vo ADJ. ADJ. ψ 4.5 4PL ψ4.5 4PL SJTW 14AWG 2C SJTW 14AWG 2C V(Red) V(Black) 43.8 V(Red) V(Black) : Max. Case Temperature 43.8 File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series BType 13.4 8.9 252 225.2 ψ 4.5 4PL 17 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJTW 18AWG 3C 17 40 45 112.6 SJTW 18AWG 2C SJTW 14AWG 2C DIM(Blue) DIM(White) V(Red) V(Black) : Max. Case Temperature 43.8 CType 13.4 8.9 252 225.2 I/P 17 17 40 11 4.5 4.5 9.25 1 2 3 65 45 112.6 Io Vo ADJ. ADJ. 1 2 O/P ψ 4.5 4PL ψ 4.5 4PL 7.5 237 43.8 AC Input Terminal Pin No. Assignment DC Output Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 FG 1 V 2 AC/L 2 V 3 AC/N File Name:HLG3HSPEC 160429
3W Constant Voltage Constant Current LED Driver HLG3H series WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HLG3H to operate in dry/wet/damp or outdoor environment. AC source I/P HLG3H O/P Size Pin Configuration (Female) Size Pin Configuration (Female) M12 Order No. Suitable Current 4PIN 5A/PIN M1204 10A max. 5PIN 5A/PIN M1205 10A max. M15 Order No. Suitable Current 2PIN 12A/PIN M1502 12A max. LED Lamp Cable Joiner 66 26 CJ041 suitable for 14AWG~16AWG CJ042 suitable for 18AWG~22AWG ψ25 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG3H O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ041, CJ042. Junction Box Option 225.2 387.2 76 10 5 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJTW 18AWG 3C 61 8.5 32 8.5 6 V(Red) V(Black) SJTW 14AWG 2C 2ψ5 3 PF 1/2" 3 PF 1/2" 150± 150± 35 43.8 Junction box option is available for A / Blank Type. Please contact MEAW WELL for details. 86 INSTALLATION MANUAL Please refer to : http://www.meanwell.com/webnet/search/installationsearch.html File Name:HLG3HSPEC 160429