SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, /4 - / N 0 / Series 55 55 FTURS The monostable spool valves in conformity with I 650 Standard (00 route H version) have TÜV (55 series) and XID (55-55 series) certified with integraty levels: SIL for HFT = 0 / SIL for HFT = ll the exhaust ports of the spool valve are connectable, providing better environmental protection. Particularly recommended for sensitive areas, such as clean rooms, and applications in the pharmaceutical and food processing sectors The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter (environmentally-protected construction) an be externally piloted (external air pilot supply) to convert valve to zero minimum operation by flipping a gasket The solenoid valves satisfy all relevant U directives GNRL Differential pressure Flow (Qv at 6 bar) - 0,4 bar [ bar =00 kpa] /4 = 60 l/min (NR) / = 000 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered 55: -40 to +0 VMQ (silicone) + PUR (polyurethane) 55: -40 to +60 MTRILS IN ONTT WITH FLUID ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody, end covers Stainless steel, ISI 6L Spool valve internal parts Stainless steel, POM ore tube Stainless steel ore and plugnut Stainless steel ore spring Stainless steel Seals & discs NR Top disc FPM Disc holder POM artridge (low power) Welded, packless ISI 40 Seat Stainless steel Seat insert POM Shading coil Silver Rider rings (low power) PTF (NF/WSNF solenoids only) LP RP - MP P UP Not available 0,5W - W Not available 0,5W -,W SPIFITIONS pipe size orifice size flow coefficient Kv operating pressure differential (bar) prefix optional solenoids power max. (PS) level NM TX / Ix min. () basic catalogue number IP65 air ( ) 7 & x db x eb mb x mb x ia - ( ) (mm) (m /h) (l/min) ~ = ~/= F LPKF NF M PV LI WSLI - S Solenoid air pilot operated - spring return (monostable) /4 6 0,75,5 0 / 0 0 P - - - - - 554 () /4 6 0,75,5 0 / 0 0 P - - - - - - - - 55G4 () /4 6 0,75,5 0 / 0 0 LP - m m m - 55 () /4 6 0,75,5 0 / 0 0 LP m - - - - - - - - 55G () /,4 4,5 0 / 0 0 P - - - - - 554 () /,4 4,5 0 / 0 0 P - - - - - - - - 55G4 () /,4 4,5 0 / 0 0 LP - m m m - 55 () /,4 4,5 0 / 0 0 LP m - - - - - - - - 55G () Solenoid air pilot operated and return (bistable) /4 6 0,75,5 0 / 0 0 P - - - - - 5544 /4 6 0,75,5 0 / 0 0 P - - - - - - - - 55G44 /4 6 0,75,5 0 / 0 0 LP - m m m - 554 /4 6 0,75,5 0 / 0 0 LP m - - - - - - - - 55G4 /,4 4,5 0 / 0 0 P - - - - - 5544 /,4 4,5 0 / 0 0 P - - - - - - - - 55G44 /,4 4,5 0 / 0 0 LP - m m m - 554 /,4 4,5 0 / 0 0 LP m - - - - - - - - 55G4 Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in D only. () ertified I 650 Functional Safety data, use suffix "SL". () Zero minimum is only achieved if external pressure is applied. Ultra Low power - Not available Low power Reduced and Medium power POWR LVLS - cold electrical holding values (watt) asic power ll leaflets are available on: www.asco.com Process Industry - 0055G-0/R0
SRIS 55-55 PRFIX TL prefix power level description 4 5 6 7 LP RP MP P F xplosionproof - NM 7, - Zinc plated steel conduit m - - V xplosionproof - NM 7, - 6 SS conduit m - - M Waterproof IP66/67 - Metal enclosure (N/I 6007-7,- and -)* - - T Threaded conduit/hole (M0 x,5) - - L P K F Flameproof - luminium (N/I 6007-, 6007-)* - - - N F Flameproof - luminium (N/I 6007-, 6007-)* - - P V ncapsulated epoxy moulded (N/I 6007-)* m - - S Solenoid with spade plug connector (N/I 6070) - - W P Waterproof IP67 - Metal enclosure - - L I I.S. with luminium IP66/IP67 enclosure (N/I 6007-+)* m - - - W S Waterproof IP67-6 SS enclosure - - W S L P K F Flameproof 6L SS (N/I 6007-, 6007-)* - - - W S M Waterproof IP66/67-6 SS enclosure (N/I 6007-0+7++)* - - W S L I I.S. with 6L SS IP66/IP67 enclosure (N/I 6007-+)* m - - - W S N F Flameproof 6L SS (N/I 6007-, 6007-)* - - T Threaded conduit (/" NPT) - - H T lass H - High temperature, +0 ambient temp. - - - X Other special constructions - - SUFFIX TL suffix power level description 4 5 6 7 LP RP MP P M O Push type manual operator / - - S L ertified I 650 Functional Safety data () / - - PRODUT SLTION GUID STP Select basic catalogue number, including pipe thread indentification letter. Refer to the specifications table on page: xample: G554 STP Select prefix (combination). Refer to the specifications table and the prefix table, respect the indicated power level. xample: M STP Select suffix (combination) if required. Refer to the suffix table, respect the indicated power level. xample: MO STP 4 Select voltage. Refer to standard voltages on page: xample: 0V / 50Hz STP 5 Final catalogue / ordering number. xample: M G554MO 0 V / 50 Hz OPTIONS & SSORIS series pipe size exhaust protector (stainless steel) G NPT (M) 55-55 / 46004 () 46004 () - 55 /4 46004 () 46004 () - 55 / 460047 () 460047 () - 55 M5 - - 460044 () vailable feature vailable feature in D only - Not available * TX/Ix valves using these solenoids are approved according to N 46- (non electrical) () Provided with "SL" suffix () Not to use with MO suffix ORDRING XMPLS VLVS: prefix () pipe thread basic number () S G 55 4 0V / 50 Hz S G 55 4 0V / 50 Hz S G 55 4 SL 0V / 50 Hz S G 55 44 MO 0V / 50 Hz SHT 55 44 MO 0V / 50 Hz LPKF G 55 MO 4V / D WSLPKF G 55 MO 0V / 50 Hz LPKF G 55 MO 4V / D WSLI G 55 4V / D M 55 4 MO 0V / 50 Hz F G 55 H 4 MO 40V / 60 Hz voltage suffix () Prefix F and V should always be used in conjunction with change letter H in the basic number ll leaflets are available on: www.asco.com - Process Industry 0055G-0/R0
SRIS 55-55 XPLNTION OF TMPRTUR RNGS OF SOLNOID VLVS Valve temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) Operator ambient temperature range The operator ambient temperature range is determined by the selected power level and the safety code Total temperature range The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I 5 Standard voltages D (=) 4V - 4V (~) 4V - 4V - 5V - 0V (5) /50Hz; other voltages and 60Hz are available on request power ratings operator electrical ambient replacement coil / kit prefix inrush holding hot/cold temperature enclosure safety code type option ~ ~ = range (TS) protection ~ = () (V) (V) (W) (W) ( ) () (N 605) 0 V/50 Hz 4V/D asic power (P) S 55 0,5 /, -40 to +75 N 6070 IP65, moulded 40045-7 40045-4 0 WP/WS 55 0,5 /, -40 to +75 N 6070 IP67, steel /SS 400405-7 400405-4 04 NF/WSNF 55 0,5 - -60 to +5/40/60 IIG x db II Gb T6/T5/T4, IID x tb III Db IP66/67, alu./ss 400405-7 - 0 NF/WSNF - - - /, -60 to +40/60/75 IIG x db II Gb T6/T5/T4, IID x tb III Db IP66/67, alu./ss - 400405-4 0 M/WSM 55 0,5 /, -40 to +40 IIG x eb mb II Gb T, IID x tb III Db IP66/67, steel /SS 4000-7 400-4 04 PV 55 0,5 /, -40 to +65 IIG x mb II Gb T(~)/T4(=), IID x mb III Db IP67, moulded - (4) - (4) 05 F/V 55 0,5 /, -40 to +5/40 NM type 7 and NM 4X 64-05 74-006 06 Low Power (LP) S,5,5,5,7/,7-40 to +60 N 6070 IP65, moulded 4005-07 4005-04 07 WP/WS,5,5,5,7/,7-40 to +60 N 6070 IP67, steel /SS 4006-07 4006-04 0 LPKF/WSLPKF (7),4,4,4 () - -40 to +40/65/0 IIG x db II+H Gb T6/T5/T4, IID x tb III Db IP66/67, alu./ss - (4) - (4) LPKF/WSLPKF - - - 0,5/0,5 (7) -40 to +60 IIG x db II+H Gb T6, IID x tb III Db IP66/67, alu./ss - (4) - (4) LPKF/WSLPKF - - -, () -40 to +40/0 IIG x db II+H Gb T6/T4, IID x tb III Db IP66/67, alu./ss - (4) - (4) NF/WSNF,5,5,5,5/, -60 to +75/0 IIG x db II Gb T6/T5, IID x tb III Db IP66/67, alu./ss - (4) (5) - (4) 0 M/WSM,5,5,5,7/,7-40 to +40/55 IIG x eb mb II Gb T6/T5, IID x tb III Db IP66/67, steel /SS - (4) - (4) 0 PV - - -,7/,7-40 to +65 IIG x mb II Gb T6, IID x mb III Db IP67, moulded - - (4) 0 F/V - - -,7/,7-40 to +60 NM type 7 and NM 4X - - (4) LI () (6) - - - 0,5/0,5-40 to +60 IIG x ia II T6 Ga, IID x tb III Db (6) IP66/67, alu. - - (4) 4 WSLI () (6) - - - 0,5/0,5-40 to +60 IIG x ia II T6 Ga, IID x tb III Db (6) IP66/67, SS - - (4) 4 prefix option safety parameters U I = (D) I I P I L I I (V) (m) (W) (H) (µf) Low Power (LP) LI/WSLI 500,5 0 0 () Temperature range can be limited by sealings () Refer to the dimensional drawings on pages: 4 to 7 () LI/WSLI: heck the electrical characteristics in the corresponding catalogue pages (4) Multiple coil kits are available under TX/Ix, contact us (5) Only available in 4, 4 and 0V/D (6) LI/WSLI: Low Power, 4 V D only (LI: For use in zone 0 locations, see the installation conditions given in the I&M instructions) (7) LPKF/WSLPKF: 4 V D, max. ambient temp. +0, contact us (4 V D =, W) () Max. power ratings values: 5 V (,4 W), 4 V D (, W) - Not available LTRIL ONNTIONS prefix connection S Spade plug connector with cable gland N750-0 (ISO 4400) for cables with an outer diameter from 6 to 0 mm WP, WS, M, WSM M0 plastics cable gland for cables with an outer diameter from 7 to mm. NF, WSNF, LPKF, WSLPKF /" NPT threaded cable entry. nclosures are supplied without cable gland PV Moulded-in cable, standard length m LI, WSLI /" NPT threaded cable entry. nclosures are supplied without cable gland F, V /" NPT conduits, standard length 5 cm DDITIONL OPTIONS Valves configured for external pilot air supply, TPL 0547 Other pipe threads are available on request x mb/md (prefix "PV") solenoid can be supplied with various cable lengths ompliance with "UL", "S" and other local approvals available on request INSTLLTION Multi language installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation Do not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for a distributing function or use in NO function. ontact us for functions available in specific versions I 650 Functional Safety (suffix SL). heck temperature range of valve body and solenoid for suitability. For probability of failure, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is = NPT (NSI.0.); G = G (ISO /) x db Prefix "NF/WSNF" enclosure is provided with a /" NPT threaded entry hole, M0 x,5 (prefix "T") is optional. These are supplied without cable gland ll leaflets are available on: www.asco.com Process Industry - 0055G-0/R0
SRIS 55-55 DIMNSIONS (mm), WIGHT (kg) 55 Series 55 Series 4,5 / 6,5 x /4 7,5 45 / x / 6 4,4 40,,5, 0,5 7 mounting holes 5, mm dia.; Spotfacing: mm dia., depth 5 mm 6,5 mm dia.; Spotfacing: mm dia., depth 6 mm, 54 0,4 5 7, TYP 0: poxy moulded S: I 5 / ISO 4400 TYP 0: luminium, epoxy coated / ISI 6L SS NF / WSNF: N/I 6007-, 6007-554 / 5544 / 554 / 5544 554 / 5544 / 554 / 5544 6 / 60 0 60 / NPT D 4 54 0 56 TYP 04: Metal, epoxy coated / ISI 6L SS WP / WS: I 5 M / WSM: N/I 6007-7++ 554 / 5544 / 554 / 5544 / 4 60 0 ll leaflets are available on: www.asco.com 4 - Process Industry 0055G-0/R0
SRIS 55-55 DIMNSIONS (mm), WIGHT (kg) TYP 05: poxy encapsulated PV: N/I 6007- TYP 06: poxy encapsulated F and V: NM type 7, / IS-6 NSI 554 / 5544 / 554 / 5544 55G4 / 55G44 / 55G4 / 55G44 / / 60 60 D 46 D 5 TYP 07: poxy moulded S: I 5 / ISO 4400 TYP 0: luminium, epoxy coated / ISI 6L SS NF / WSNF: N/I 6007-, 6007-55 / 554 / 55 / 554 55 / 554 / 55 / 554 / NPT 60 0 6 60 / NPT D 4 54 0 56 TYP 0: Metal, epoxy coated / ISI 6L SS WP / WS: I 5 M / WSM: N/I 6007-7++ TYP 0: poxy encapsulated PV: N/I 6007-55 / 554 / 55 / 554 55 / 554 / 55 / 554 / NPT 4 / NPT 60 60 0 D 46 ll leaflets are available on: www.asco.com Process Industry - 5 0055G-0/R0
SRIS 55-55 DIMNSIONS (mm), WIGHT (kg) TYP : poxy encapsulated F and V: NM type 7, / IS-6 NSI 55G / 55G4 / 55G / 55G4 / 60 D 5 TYP : luminium, cataphorese black painting / ISI 6L SS LPKF/WSLPKF: N/I 6007-, 6007- TYP 4: luminium, cataphorese black painting / ISI 6L SS LI / WSLI: N/I 6007-, 6007-55 / 554 / 55 / 554 55 / 554 / 55 / 554 / NPT / NPT /NPT 4 / NPT 60 60 5 6 0 5 6 0 ll leaflets are available on: www.asco.com 6 - Process Industry 0055G-0/R0
SRIS 55-55 DIMNSIONS (mm), WIGHT (kg) type prefix/option power level 55 55 weight () monostable bistable D D 55 55 55 55 0 S P 7 0,5 6,5 54 0 0,4 6,5 0,,6,5 4,0 0 NF P 5 4 4 - -, 0,6 47,5 - -,4, 4,05 6, 0 WSNF P 5 4 4 - -, 0,6 47,5 - -,64 5,4 6,65,7 04 WP / WS / M / WSM P 4 04 0 - - 70,7 4, 0,7 - -,6,,6 4,66 05 PV P 7,5 6,5 54 0,7 6,5,5,,7,5 4,0 06 F / V P 7 6,5 74,5 57,5 0, 6,5,5,,7,5 4,0 07 S LP 7 0,5,0 55 0 07, 6,5 0,,6,5 4,0 0 NF LP 5 4 4 - -, 0,5 47,5 - -,4, 4,05 6, 0 WSNF LP 5 4 4 - -, 0,5 47,5 - -,64 5,4 6,65,7 0 WP / WS / M / WSM LP 4 04 0 - - 70,7 4, 07, - -,6,,6 4,66 0 PV LP 7 0,5 6,5 54 0 06, 6,5,5,,7,5 4,0 F / V LP 7 0,5 74,5 57,5 0 06, 6,5,5,,7,5 4,0 LPKF LP 4 - - 66 5,7 - -, 4,0, 4, WSLPKF LP 4 - - 66 5,7 - -,4,77,4 5, 4 LI LP 4 - - 66 5,7 - -,4 4,,4 4, 4 WSLI LP 4 - - 66 5,7 - -,5,7,44 5, () Incl. coil(s) and connector(s). x d certified cable gland (on request) Three-core cable, length m 4 able gland for unarmoured cable with 7 to mm dia. sheath 6 onnector rotatable by 0 increments (cable Ø 6-0 mm) Manual operator location, suffix MO xternal pilot air supply, / pipe size onnectable pilot exhaust port Non-connectable pilot exhaust port SSORIS ø4 ø4 / NPT /4 NPT / NPT 0 pilot exhaust protector part number 76405-00 pilot top exhaust low power (SO solenoid interface) Ø Ø M5 / /4 / 4,5 0 4 exhaust protector (stainless steel) ll leaflets are available on: www.asco.com Process Industry - 7 0055G-0/R0
SRIS 55-55 ll leaflets are available on: www.asco.com - Process Industry vailability, design and specifications are subject to change without notice. ll rights reserved. 0055G-0/R0