9-237A/BHR6GHC-A/2T eatures Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself will remain within RoHS compliant version. Description The 9-237A SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. lat backlight for LCD, switch and symbol. General use. Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Device Selection Guide Code Chip Materials Emitted Color Resin Color BH InGaN Blue R6 AlGaInP Brilliant Red Water Clear GH InGaN Brilliant Green 2 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Absolute Maximum Ratings (Ta= ) Parameter Symbol Code Rating Unit Reverse Voltage V R 5 V orward Current I ma BH Peak orward Current (Duty / @KHz) I P R6 6 ma GH BH 95 Power Dissipation Pd R6 6 mw GH 95 BH 5 Electrostatic Discharge(HBM) ESD R6 2 V GH 5 Operating Temperature T opr -4 ~ +85 Storage Temperature Tstg -4 ~ +9 Soldering Temperature Tsol Reflow Soldering : 26 for sec. Hand Soldering : 35 for 3 sec. 3 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Electro-Optical Characteristics (Ta= ) Parameter Symbol Code Min. Typ. Max. Unit Condition BH 28.5 ----- 2 Luminous Intensity Iv R6 72. 285 mcd GH 2 285 Viewing Angle 2θ /2 ----- 2 ----- Deg BH ----- 632 ----- Peak Wavelength λp R6 ----- 58 ----- nm GH ----- 468 ----- Dominant Wavelength λd BH 465 ----- 475 R6 64 ----- 628 nm I =2mA GH 58 ----- 528 BH ----- 2 ----- Spectrum Bandwidth Radiation λ R6 ----- 35 ----- nm GH ----- ----- BH 2.7 ----- 3.8 orward Voltage V R6.7 ----- 2.4 V GH 2.7 ----- 3.8 BH 5 Reverse Current I R R6 μa V R =5V GH ----- ----- 5 Note:. Tolerance of Luminous Intensity: ±% 2. Tolerance of Dominant Wavelength: ±nm 3. Tolerance of orward Voltage: ±.V 4 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T BH Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition N 28.5 45. P 45. 72. Q 72. 2 mcd I =2mA R6 Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition Q 72. 2 R 2 8 S 8 285 GH Bin Range of Luminous Intensity mcd I =2mA Bin Code Min. Max. Unit Condition R 2 8 S 8 285 mcd I =2mA Note:. Tolerance of Luminous Intensity: ±% 5 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Typical Electro-Optical Characteristics Curves BH Relative luminous intensity (%) 75 5 Spectrum Distribution Ta= C I (ma) orward Current 4 45 5 55 6 2.6 Wavelength λ (nm) 5 4 3 2 orward Current vs. orward Voltage Ta= C 3. 3.4 3.8 4.2 4.5 orward Voltage V (V) Relative luminous intensity (%) -6 Luminous Intensity vs. Ambient Temperature -4-2 2 4 6 8 Relative luminous intensity (%) Luminous Intensity vs. orward Current Ta= C 2 Ambient Temperature Ta ( C) orward Current I (ma) orward Current I (ma) 5 4 3 2 orward Current Derating Curve 2 4 6 85 Ambient Temperature Ta ( C)..9.8.7 Radiation Diagram.5.3..2.4 Ta= C 2 3.6 4 5 6 7 8 9 6 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Typical Electro-Optical Characteristics Curves R6 Relative luminous intensity (%) 75 5 5 Spectrum Distribution Ta= C I (ma) orward Current 55 6 65 7.2 Wavelength λ (nm) 5 4 3 2 orward Current vs. orward Voltage Ta= C.6 2. 2.4 2.8 3. orward Voltage V (V) Relative luminous intensity (%) -6 Luminous Intensity vs. Ambient Temperature -4-2 2 4 6 8 Relative luminous intensity (%) Luminous Intensity vs. orward Current Ta= C 2 Ambient Temperature Ta ( C) orward Current I (ma) orward Current Derating Curve Radiation Diagram Ta= C orward Current I (ma) 5 4 3 2 2 4 6 85 Ambient Temperature Ta ( C)..9.8.7.5.3..2.4 2 3 4 5 6 7 8 9.6 7 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Typical Electro-Optical Characteristics Curves GH ) % Spectrum Distribution Ta= 5 orward Current vs. orward Voltage Ta= C ( Relative luminous intensity 75 5 4 45 5 55 6 I (ma) orward Current 4 3 2 2.6 3. 3.4 3.8 4.2 4.5 Wavelength λ (nm) orward Voltage V (V) (%) Luminous Intensity vs. Ambient Temperature (%) Luminous Intensity vs orward Current Ta= C Relative luminous intensity -6-4 -2 2 4 6 8 Relative luminous intensity Ambient Temperature Ta ( C) orward Current Derating Curve orward Current Radiation Diagram I (ma) Ta= C I (ma) 5 4 2 3 orward Current 3 2 2 4 6 85..9.8.7.5.3..2 4 5 6 7 8 9.4.6 Ambient Temperature Ta ( C) 8 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Package Dimension.6 4 3.6 2 Anode mark..35.55.55.35.8 2.35.9.6.65±..4±.2.6±.2 4 3.±..9 4 3.4 2.8 2±.2 Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. Note: Tolerances unless mentioned ±.mm. Unit = mm 9 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Moisture Resistant Packing Materials Label Explanation Pb CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX EVERLIGHT CAT : XXX HUE : XXX RE : XXX RoHS CPN: Customer s Product Number P/N: Product Number QTY: Packing Quantity CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates & Dom. Wavelength Rank RE: orward Voltage Rank LOT No: Lot Number Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±.mm,unit = mm Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Carrier Tape Dimensions: Loaded quantity 2 PCS per reel 2 4 3 Note: The tolerances unless mentioned is ±.mm,unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Precautions or Use. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2. Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 3 or less and 9%RH or less. 2.3 After opening the package: The LED's floor life is year under 3 or less and 6% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 6±5 for 24 hours. 3. Soldering Condition 3. Pb-free solder temperature profile Above5 C 3sec.Max. 3 C/sec.Max. Pre-heating 5~2 C 6~2sec. Above 27 C 6~5sec. 26 C Max. sec. Max. 6 C/sec.Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 35 for 3 seconds within once in less than the soldering iron capacity W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 2 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com
9-237A/BHR6GHC-A/2T Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 3 Copyright 2, Everlight All Rights Reserved. Release Date : 3-May-23. Issue No: DSE-8938 Rev.3 www.everlight.com