TM MODEL: 44119-1 ASSEMBLY INSTRUCTIONS Blain's Please contact us before returning the product to the store. Toll Free: 877-82-814 Register Now on themdsports.com and Earn a One-Year Warranty for Free!
Give Us Your Opinion and Receive A FREE FULL YEAR EXTENTED WARRANTY! Write a review for a recently purchased item on TheMDSports.com and receive an extended full year limited warranty, valued at $10.00. See TheMDSports.com for additional details.
LIMITED 90 DAYS WARRANTY This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer. The only exceptions to the warranty include mainframes, table tops, playing surfaces, batteries or tools. The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental damage or neglect. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one State (province) to another. A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all requests for warranty service, please feel free to contact our Consumer Service Department at : TOLL FREE: 877-82-814 WEBSITE: Please be aware of your product s Limited Warranty for the return/refund policy from the store, We, at Medal Sports, can not handle the product which is out of product s limited warranty since we only provide available parts. Thank you! PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE. STAPLE YOUR RECEIPT HERE NOTICE! 1 - Please leave your name, address, phone number, model number, parts needed on the answering machine if there is no attendant. Failure to do so will result in a delay in shipping parts to you. 2 - Please review the replacement parts list and make sure that you have all of your parts before beginning assembly. For questions that may arise or for missing/damaged parts, please contact us. 3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before putting together, all damaged table tops/playing surfaces need to be returned to the store. Please contact with retailer for their return policy. Thank you very much! 1
TOOLS REQUIRED: Phillips Screwdriver - Not Included Standard (Flat Head Screwdriver) - Not Included Wrench - Included Allen Key - Included CAUTION! Electric Screwdrivers may be helpful during assembly; however, please set a low torque and use extreme caution. Power Tools - Set Low Torque High Torque over tightened ASSEMBLY TIPS: 1 - Please read the instructions carefully, and follow all assembly, operation and safety instructions properly in order to avoid damage and injury. For the assembly, at least two adults are required. 2 - Some figures or drawings may not look exactly like your product. Please read and understand the text before beginning each assembly step. IMPORTANT NOTICE! 1 - This product is intended for INDOOR use only. 2 - Please do not sit, climb or lean on the product. 3 - Please do not drag the product when moving it in order to avoid damaging the legs. 4 - Please only use spray furniture polish to clean the exterior surfaces of the product. - This is not a child's toy, adult supervision is required for children playing this game.! WARNING: Adult Assembly Required.! WARNING: CHOKING HAZARD -- This item contains small parts or / and small balls. Not suitable for children under 3 years. Strong Adults Needed No Children in Assembly Area Keep away from pets Do not use or keep product outdoors. For indoor use only. No wet/humid conditions. 2
44119-1 PARTS LIST 1 2 3 4 Table Surface-A Table Surface-B Table Tennis Paddle Table Tennis Ball 7 8 Curved Outer Leg with Cap Curved Inner Leg with Cap Linkage Tube with Stop Bracket 9 10 11 12 Linkage Tube Bracket x Gravity Lock 13 14 1 1 End Apron (1.3m) Side Apron (1.2m) x4 x1 x1 Safety Strap - Long Safety Strap - Short Net Net Post 17 18 19 20 x4 x4 x8 x4 Plastic Corner Wheel Leg Bracket - A Leg Bracket - B 21 22 A1 A2 x47 x10 Plastic Panel with Frame T Washer M4 X 12MM Screw M X 0MM Bolt A3 A A x8 8 x8 x10 M X 4MM Bolt MM Washer Spacer M Nut A7 A8 A9 x88 x1 x1 M X 13MM Screw Wrench Allen Key 3
44119-1 PRE-INSTALLED PARTS P1 P2 x4 x4 Outer Leg Cap Inner Leg Cap ASSEMBLY INSTRUCTIONS: 1. Find a clean, level place to begin the assembly of your Table Tennis Table Game. We recommend that two adults work together to assemble this table tennis table game. 2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the Parts list page. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface. 4
1 2 FIG. 1 FIG. 1A A7 9 X 13 X 1 9 14 A1 X 3 13 A1 14 A7 4 1 Player 2 Note: Align the inside seams of each sections so that pre-drilled holes line up across from each other. 2 1 Center Note: Center gap tolerance approximately 10~13mm. 9 Player A1 14 FIG.1 3. Place Table Surface-A (#1) and Table Surface-B (#2) with the painted surface facing down on a flat surface. 4. Connect Table Surfaces together using three Brackets (#9) using twelve Screws (#A7). See FIG. 1 and 1A.. Attach the Safety Strap - Long (#13) and Safety Straps - Short (#14) to the surface using three Screws (#A1). See FIG. 1.
Player Center A7 FIG. 2 FIG. 2A 19 X 8 20 X 4 NOTE: Make sure that the oval cut-out in the Leg Bracket are facing the center of the table for proper installation. 19 A7 X 4 P1 X 4 P1 P2 X 4 P2 A7 This is hole for Gravity Lock assembly. 19 Player A7 19 20 19 20 19 FIG.2. Place one Curved Outer Leg with Cap (#) on the player end of the table half and one Curved Inner Leg with Cap (#) on the center end of the table half. 7. Attach the Leg Bracket (#19 & #20) to the Curved Outer Leg (#) and the Curved Inner Leg (#) using Screws (#A7). See FIG. 2A. 8. Repeat the above steps for the other table half.
Center FIG. 3A 7 8 FIG. 3 A2 8 A A A2 X 8 X 1 A X 8 A8 A X 8 A8 X 1 8 Player A9 X 1 7 A9 FIG. 3B A 7 Player Note: Be careful of the assembly direction on pictures when you assemble the Linkage Tube #7 and #8 in order to fit the folding function. A A2 FIG.3 9. Attach one end of the Linkage Tube (#8) to the inside of the Curved Outer Leg (#) using one Bolt (#A2), two Washers (#), one Spacer (#A) and one Nut (#A). See FIG. 3A. 10. Repeat the same for the other end of this Linkage Tube, only attaching it to the outside of the Curved Inner Leg (#). 11. Attach one end of the Linkage Tube with Stop Bracket (#7) to the inside of the Curved Outer Leg (#) using one Bolt (#A2), two Washers (#), one Spacer (#A) and one Nut (#A). 12. Repeat the same for the other end of this Linkage Tube, only attaching it to the outside of the Curved Inner Leg (#). See FIG 3B. 13. Repeat the above steps for the other table half. 7
Player Player A1 FIG.4A 11 FIG. 4 12 X 4 17 17 X 4 A1 X 44 17 A1 12 11 A1 17 Center 12 FIG.4 14. Place the Plastic Corner (#17) flush with table corner and attach using three Screws (#A1) per Corner. See FIG. 4A. 1. Place the End Apron (#11) between the corners and flush with the table edge at the Player end of table using six Screws (#A1) per End Apron. See FIG. 4. 1. Place the Side Apron (#12) flush with table edge at the side of the table using five Screws (#A1) per Side Apron. See FIG. 4. NOTE: Make sure the all Aprons are inside the Plastic Corners. 8
Player 18 21 A3 X 4 X 4 FIG. X 4 18 21 A9 A3 18 21 A3 FIG. 17. Make sure the Outer Leg Caps (P1) and Inner Leg Caps (P2) are installed into the ends of the leg. Then place the Wheel (#18) into the Legs. See FIG.. 18. With the logo upside-down, attach the Plastic Panel with Frame (#21) to the Curved Inner Leg (#) using two Bolts (#A3) and two Washers (#) per frame. NOTE: Do not tighten securely at this time. 9
Warning FIG. FIG. A FIG. B FIG. C FIG. D A. TURN TABLE ON ITS SIDE B. FOLD LEGS AND TABLE HALVES AND LOCK IN PLACE C. LIFT TABLE AND TURN IN THE AIR D. DO NOT LEAN TABLE ON ITS LEGS! E. SET TABLE DOWN EVENLY ON ALL WHEELS, TO PREVENT BREAKING LEGS A B C D E CAUTION: Two strong adults are recommended to turn the table over as shown. 10
Center Player A3 X 4 FIG. 7 X 4 Note: Center gap tolerance approximately 10~13mm. 21 A3 A9 FIG.7 19. Before turning the table over, make sure the Curved Inner Leg (#) towards the center of the table in order to fix leg in right position. NOTE: Two adults are required to turn this table over. 20. One person should stand at each center of the table and turn the table over completely so that it rests on its legs. 21. Standing at the sides of the table, place the two table halves so they are inches apart. NOTE: Be careful that you do not push either half backwards as this may cause the legs to fold! 22. Attach the Plastic Panel with Frame (#21) to the opposite table half using two Bolts (#A3) and two Washers (#) per frame.see FIG. 7. Now go back and tighten all the connections. 11
10 22 FIG. 8 A2 A X 4 FIG. 8A HARDWARE AFTER ASSEMBLY A2 A2 22 10 A 22 A 10 FIG.8 23. Attach one Gravity Lock (#10) to the Curved Inner Leg (#) using one Bolt (#A2), two Washers (#), one T Washer (#22) and one Nut (#A) per Gravity Lock. See FIG. 8A. 12
1 1 X 1 FIG. 9 FIG. 9A 1 1 1 1 1 FIG.9 24. Attach the Net Post (#1) at the middle of the table and slide the net over the post. Stretch the Net (#1) across the center of the table and slip the net over the post on the opposite side. See FIG. 9A. 13
FIG. 10A FIG. 10 FIG. 10C 13 FIG. 10B 10 FIG. 10D Gravity Lock 2 1 Reverse 14 Safety Straps FIG.10 2. Engage the Wheels Lock. 2. Folding the table - First fold the side of the table without the Net Post. Hold the end securely and lift the table. Make sure the Gravity Lock (#10) is locked. Repeat for the other side. Attach the Safety Strap Long and short (#13, #14) together to prevent the sides from falling. See FIG.10 27. To unfold the table - First release the Gravity Lock (#10) and Safety Strap (#13 & #14). Then pull the bottom of the outer leg and slowly lower the table to the floor. NOTE: When the table is in its storage position, always attach the safety strap to prevent the sides from falling. YOU ARE NOW READY TO PLAY! 44119-1 (The last page) 14