KO070 Series TERMINALS Box clamp design terminal blocks are used with the KO070 series enclosures. Wire(s) to be terminated are squeezed between the bottom of the clamp and the busbar for reliable, gastight connections. The terminal blocks can be machine soldered to the board in the same step as the other components to save time and labor. Enclosures with extended length pins are available to increase enclosure cavity for large components. All terminals have funnel shaped wire openings to eliminate wire fraying. The terminal screws can be turned with a flat tip or a # or # Philips screwdriver. MOUNTING The KO070 series have integral mounting feet that snap onto standard mm DIN rail. They cannot be panel mounted. MARKING Silk screen or attach label to the face of the enclosure. Economical, compact KO070 enclosures are supplied as easy to assemble kits. They are ideal for housing I/O circuits, relays, timers and other small devices. Each kit consists of two housing half shells and to 6 machine solderable terminals with standard or extended length pins. Terminal Assembly PC Board Right Housing Shell MATERIALS Housing Shell: Polycarbonate, 0% Glass Filled Terminal: Tinned Bronze Terminal Screw: Chromated Steel Temperature Rating: 5 C (57 F) UL9 VO Standard Left Housing Shell Terminal Assembly PC Board PROTECTION KO070 enclosures have an IP rating (finger protected) and meet VBG and other European accident prevention requirements. CONSTRUCTION The KO070 enclosures consist of two housing shells that snap together, and sectional, snap-together terminals. The maximum preassembled number of terminals are part of the enclosure kit. Potting is not recommended. Enclosures with removable center cover sections are available upon request. BOARD PLACEMENT Each enclosure can accept two boards, each up to.5mm (.065 in.) thick, inserted vertically (parallel to the DIN rail) facing the terminals. These boards can be machine soldered to the terminals. Enclosure types KO07 through KO079, accept larger boards that can be screwed to the sidewalls of the housing shells (vertically, perpendicular to the DIN rail) using molded-in standoffs and screws. Boards mounted on the sides can be mm (.0 in.) thick and require a wire jumper connection. Altech Corp. Royal Road Flemington, NJ 088-00 Phone (8)806-0 FAX (8)806-9 www.altechcorp.com
KO070 Series Terminal 6 Terminal 6A, 300V, - AWG Up to 5 C (57 F) mm 6A, 300V, - AWG Up to 5 C (57 F) mm 9.00 KO07 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 9.00 KO07 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 75.5.5 PCB DRAWING (To convert to inches divide by.) Ø.3.5 thick 7..5 thick 58 3 PCB DRAWING (To convert to inches divide by.) Ø.3 3.5 thick 7. 57.5 thick. 7. 7 Ø.3 0 0 0 0 Altech Corp. Royal Road Flemington, NJ 088-00 Phone (8)806-0 FAX (8)806-9 www.altechcorp.com 9
KO070 Series 6 Terminal 8 Terminal 6A, 300V, - AWG Up to 5 C (57 F) () Vertical, Perpendicular mm 6A, 300V, - AWG Up to 5 C (57 F) mm 9.0 KO07 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 9.030 KO073 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 6.5 PCB DRAWING (To convert to inches divide by.) 6 0.8 Ø.3.5 thick 7...5 thick 58 5 0 5 5 8 8 thick.5.5 7.5 x5 5.5 PCB DRAWING (To convert to inches divide by.).5 thick Ø.3 7..5 thick Ø.3. 63 7. 86 0 0 9 Altech Corp. Royal Road Flemington, NJ 088-00 Phone (8)806-0 FAX (8)806-9 www.altechcorp.com
KO070 Series 8 Terminal 9 Terminal 6A, 300V, - AWG Up to 5 C (57 F) () Vertical, Perpendicular mm 6A, 300V, - AWG Up to 5 C (57 F) () Vertical, Perpendicular mm 9.00 KO077 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 9.050 KO075 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 6 75 3 6 PCB DRAWING (To convert to inches divide by.) PCB DRAWING (To convert to inches divide by.) 6.5 thick 6 6. 7. Ø.3.5 thick 6 58 5 0.5 thick 5.5.5.5 7.5 x5 3 6 Ø.3 5 8.5 thick 7. 57 Ø.3 5 8.5 thick 7. 7. 0.8 5 0.5 thick 5.5.5 7.5 x5 Altech Corp. Royal Road Flemington, NJ 088-00 Phone (8)806-0 FAX (8)806-9 www.altechcorp.com 93
KO070 Series Terminal Terminal 6A, 300V, - AWG Up to 5 C (57 F) () Vertical, Perpendicular mm 6A, 300V, - AWG Up to 5 C (57 F) () Vertical, Perpendicular mm 9.0 KO076 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 9.070 KO078 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 6 75 3 6 PCB DRAWING (To convert to inches divide by.) PCB DRAWING (To convert to inches divide by.) Ø.3 0.8 6 Ø.3 5 8.5 thick 7. 5.5 thick 8 7. 63 86 5 0.5 thick 5.5.5 7.5 x5 3 6 6 6..5 thick 7. Ø.3 57 Ø.3.5 thick. 7. 6. 6 7 5 0.5 thick 5.5.5 7.5 x5 9 Altech Corp. Royal Road Flemington, NJ 088-00 Phone (8)806-0 FAX (8)806-9 www.altechcorp.com
KO070 Series 6 Terminal 6A, 300V, - AWG Up to 5 C (57 F) () Vertical, Perpendicular mm 9.080 KO079 Standard Length Pins Solder Pins Meter 5/M TSx7.5/M ENCLOSURE DRAWING (To convert to inches divide by.) 5 6 PCB DRAWING (To convert to inches divide by.) 6 6..5 thick 6 7. Ø.3 Ø.3 6..5 thick 6 7. 63 86 5 0.5 thick 5.5.5 7.5 x5 Altech Corp. Royal Road Flemington, NJ 088-00 Phone (8)806-0 FAX (8)806-9 www.altechcorp.com 95