Silicon Hot-Carrier iodes SCHOTTKY Barrier iodes These devices are designed primarily for high efficiency UHF and VHF detector applications. They are readily adaptable to many other fast switching RF and digital applications. They are supplied in an inexpensive plastic package for low cost, high volume consumer and industrial/commercial requirements. They are also available in a Surface Mount package. Features Extremely Low Minority Carrier Lifetime 5 ps (Typ) Very Low Capacitance.5 pf (Max) @ V R = 5 V Low Reverse Leakage I R = nadc (Typ) MB0, MMB0 These evices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS MB0 MMB0LT Rating Symbol Value Unit Reverse Voltage V R 0 V Total evice issipation @ T A = 5 C erate above 5 C Operating Junction Temperature Range P F 80.8 00.0 mw mw/ C T J 55 to +5 C 0 VOLTS SILICON HOT CARRIER ETECTOR AN SWITCHING IOES MB0 TO 9 (TO 6AC) CASE 8 STYLE A = Assembly Location Y = Year WW = Work Week = Pb Free Package (Note: Microdot may be in either location) CATHOE ANOE MARKING IAGRAM MB 0 AYWW Storage Temperature Range T stg 55 to +50 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. MMB0LT MARKING IAGRAM SOT (TO 6) CASE 8 STYLE 8 4T M M = ate Code = Pb Free Package (Note: Microdot may be in either location) CATHOE ANOE ORERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page of this data sheet. Semiconductor Components Industries, LLC, 009 August, 009 Rev. 5 Publication Order Number: MB0/
ELECTRICAL CHARACTERISTICS (T A = 5 C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Reverse Breakdown Voltage (I R = 0 A) V (BR)R 0 V Total Capacitance (V R = 5 V, f =.0 MHz) Figure C T 0.9.5 pf Reverse Leakage (V R = 5 V) Figure I R 00 nadc Forward Voltage (I F =.0 madc) Figure 4 V F 0.8 0.45 Vdc Forward Voltage (I F = 0 madc) Figure 4 V F 0.5 0.6 Vdc ORERING INFORMATION MB0G evice Package Shipping TO 9 5000 Units / Bulk MMB0LTG SOT 000 / Tape & Reel MMB0LTG SOT 0,000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BR80/.
TYPICAL ELECTRICAL CHARACTERISTICS C T, TOTAL CAPACITANCE (pf).8.4.0.6. 0.8 0.4 f =.0 MHz, MINORITY CARRIER LIFETIME (ps) 500 400 00 00 00 KRAKAUER METHO 0 0.0 6.0 9.0 5 8 V R, REVERSE VOLTAGE (VOLTS) 4 7 0 0 0 0 0 0 40 50 60 70 80 90 00 I F, FORWAR CURRENT (ma) Figure. Total Capacitance Figure. Minority Carrier Lifetime 0 00, REVERSE LEAKAGE ( A) I R.0 0. 0.0 T A = 00 C 75 C 5 C I F, FORWAR CURRENT (ma) 0.0 T A = 85 C T A = -40 C T A = 5 C 0.00 0 6.0 8 4 V R, REVERSE VOLTAGE (VOLTS) Figure. Reverse Leakage 0 0. 0. 0.4 0.6 0.8.0. V F, FORWAR VOLTAGE (VOLTS) Figure 4. Forward Voltage I F(PEAK) CAPACITIVE I R(PEAK) FORWAR STORAGE SINUSOIAL GENERATOR BALLAST NETWORK (PAS) UT PAS SAMPLING OSCILLOSCOPE (50 INPUT) Figure 5. Krakauer Method of Measuring Lifetime
PACKAGE IMENSIONS TO 9 (TO 6AC) CASE 8 06 ISSUE L SEATING PLANE P R X X H G A V N L K B C ÉÉJ SECTION X X NOTES:. IMENSIONING AN TOLERANCING PER ANSI Y4.5M, 98.. CONTROLLING IMENSION: INCH.. CONTOUR OF PACKAGE BEYON ZONE R IS UNCONTROLLE. 4. LEA IMENSION IS UNCONTROLLE IN P AN BEYON IMENSION K MINIMUM. INCHES MILLIMETERS IM MIN MAX MIN MAX A 0.75 0.05 4.45 5. B 0.70 0.0 4. 5. C 0.5 0.65.8 4.9 0.06 0.0 0.407 0.5 G 0.050 BSC.7 BSC H 0.00 BSC.54 BSC J 0.04 0.06 0.6 0.4 K 0.500 ---.70 --- L 0.50 --- 6.5 --- N 0.080 0.05.0.66 P --- 0.050 ---.7 R 0.5 ---.9 --- V 0.5 ---.4 --- STYLE : PIN. ANOE. CATHOE N 4
PACKAGE IMENSIONS SOT (TO 6) CASE 8 08 ISSUE AN A E A e b HE SEE VIEW C L L VIEW C c 0.5 NOTES:. IMENSIONING AN TOLERANCING PER ANSI Y4.5M, 98.. CONTROLLING IMENSION: INCH.. MAXIMUM LEA THICKNESS INCLUES LEA FINISH THICKNESS. MINIMUM LEA THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 8 0 THRU 07 AN 09 OBSOLETE, NEW STANAR 8 08. MILLIMETERS INCHES IM MIN NOM MAX MIN NOM MAX A 0.89.00. 0.05 0.040 0.044 A 0.0 0.06 0.0 0.00 0.00 0.004 b 0.7 0.44 0.50 0.05 0.08 0.00 c 0.09 0. 0.8 0.00 0.005 0.007.80.90.04 0.0 0.4 0.0 E.0.0.40 0.047 0.05 0.055 e.78.90.04 0.070 0.075 0.08 L 0.0 0.0 0.0 0.004 0.008 0.0 L 0.5 0.54 0.69 0.04 0.0 0.09 H E.0.40.64 0.08 0.094 0.04 STYLE 8: PIN. ANOE. NO CONNECTION. CATHOE 0.95 0.07 SOLERING FOOTPRINT* 0.95 0.07.0 0.079 0.9 0.05 0.8 0.0 SCALE 0: mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLERRM/. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORERING INFORMATION LITERATURE FULFILLMENT: Literature istribution Center for ON Semiconductor P.O. Box 56, enver, Colorado 807 USA Phone: 0 675 75 or 800 44 860 Toll Free USA/Canada Fax: 0 675 76 or 800 44 867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800 8 9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 4 790 90 Japan Customer Focus Center Phone: 8 577 850 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your loca Sales Representative MB0/