Modern Lighting Solutions

Modern Lighting Solutions 020 8123 7914 sales@modernlightingsolutions.co.uk

CONTENT LED STRIP ORDER CHART... p.04 WHY CHOOSE TEUCER LED STRIP... p.05 SINGLE COLOUR LED STRIP... p.07-4.8 watts / m (LS-1)... p.08-9.6 watts / m (LS-3)... p.09-12 watts / m (LS-4)... p.10-19.2 watts / m (LS-5)... p.11-28.8 watts / m (LS-6)... p.12 TUNABLE WHITE LED STRIP... p.15-9.6 watts / m Tunable White (LS-3TW)... p.16-19.2 watts / m Tunable White (LS-5TW)... p.17 LED STRIP ACCESSORIES PAGE... p.30 -Single Colour Connectors... p.30 -Tunable White Connectors... p.31 -RGB Connectors... p.32 -RGB/W Connectors... p.33 -IP65 Connector Kit... p.33 RGB LED STRIP... p.19-7.2 watts / m (LS-2IPRGB)... p.21-14.4 watts / m (LS-4RGB)... p.22-28.8 watts / m (LS-6RGB)... p.23 RGB/W LED STRIP... p.25-17.3 watts/ m (LS-4RGBW)... p.26 LED STRIP RUNS EXPLANATION PAGE... p.27 ACHIEVE A LINEAR EFFECT... p.35 ALUMINIUM EXTRUSIONS... p.36 -AL-0 Single Row Extrusion... p.37 -Al-1 & AL-1i Single Row Extrusion... p.38 -AL-2 & AL-2i Single Row Extrusion... p.40 -AL-4 Single Row Extrusion... p.42 -AL-7 Single Row Angle Extrusion... p.43 -AL-5 & AL-5i Double Row Extrusion... p.44 -AL-6 & AL-6i Double Row Extrusion... p.46

PAGE CONTROL GEAR... p.62 SMART PHONE/ TABLET APP & WI-FI KIT...p.63 SINGLE COLOUR CONTROLLERS... p.64-1 Zone Dimmer (LR-W)... p.64-1 Zone Rotary Wall & Table Top Dimmer (WP-2W & LR-2W)... p.65-2 Zone Wall Dimmer (WP-2T)... p.66 LED DRIVERS & MODULES... p.48 DRIVERS COMPATIBILITY CHART... p.49-10w (LD-IP10/24)... p.50-20w (LD-IP20/24)... p.50-30w (LD-IP30/24)... p.51-60w (LD-IP60/24)... p.51-100w (LD-IP100/24)... p.52-150w (LD-IP150/24)... p.52-200w (LD-IP200/24)... p.53-0-10v Decoder (DIM-0101CH)... p.54 -Dali 4 Channel Decoder (DIM-DALI1CH)... p.54 TUNABLE WHITE CONTROLLERS... p.67-1 Zone Tunable White Controller (LR-TW)... p.67-4 Zone Tunable White Wall Unit (WP-4TW)... p.68-6 Zone Tunable White Controller (LR-6TW)... p.69 RGB CONTROLLERS... p.70-1 Zone RGB Controller (LR-RGB)... p.70-1 Zone RGB Rotary & Table Top Units (WP-1RGB & LR-1RGB)... p.71-2 Zone RGB Controller (LR-2RGB)... p.72 RGB/W CONTROLLERS... p.73-1 Zone RGB/W Controller (LR-1RGBW)... p.73-1 Zone RGB/W Wall Unit (WP-DMX)... p.74-4 Zone RGB/W Wall Unit (WP-4RGBW)... p.75 MAINS DIMMABLE LED DRIVERS... p.56 DIMMABLE DRIVERS COMPATIBILITY CHART...p.57-20w (LDD-20/24)... p.58-45w (LDD-45/24)... p.58-60w (LDD-IP60/24)... p.59-80w (LDD-IP80/24)... p.59-100w (LDD-IP100/24)... p.60-8 Zone RGB/W Controller (LR-8RGBW)... p.76-8 Zone RGB/W Wall Unit (WP-DMXMASTER).. p.77 CONTROLLER ACCESSORIES... p.78 -Power Repeaters (PR-RGB)... p.78 -DMX Receiver (DIM-DMX1CH)... p.79 -DMX Amplifier (DIM-DMX/AMP)... p.79-150w (LDD-IP150/24)... p.60-200w (LDD-IP200/24)... p.61

LED STRIP ORDER CHART choose your colour temperature & IP rating decide on your LED Strip wattage & lumen requirements Choose from Single colour: 2700k, 3000k, 4000k, 6000k Tunable White RGB, RGBW IP Rating: IP20, IP65 Focus on your lumen requirements. This will give you the best indication of each LED Strip s brightness. pick your Aluminium Extrusion 30.6 mm 20.2 mm 23.5 mm 10 mm - Our Aluminum Extrusions allow you to install LED Strip in a number of applications. - Extrusions are essential in acting as a heat sink and thus enabling your LED Strip to operate at a cooler temperature, enhancing product life. calculate how many, what type & which wattage Driver is required Please refer to our Driver/LED Strip compatibility charts when deciding on suitable driver wattages. p.46 and p.53. LED STRIP ORDER CHART /4 decide on what Control Gear is required The manner in which you require to control your LED Strip will determine the type of control gear you will need. - We offer a variety of our own remote and wall mounted controllers. - If you need to integrate your LED Strip with a home dimmer, lighting system or any other interface; we have everything you need. (Please view our control gear section for further details and advice)

2 ounce PCB all of our LED Strip products feature a 2 oz PCB board, enabling greater product longevity and use of longer LED Strip runs. Self-Adhesive All our LED Strip features a powerful 300MP adhesive. This offers exceptional heat resistance, thus ensuring products are secure and do not peel off surfaces with time. Efficiency A common belief associated with older forms of lighting, is that higher wattages equate to better and brighter light outputs. we strive to gain the most efficiency out of our LED products and our focus is on achieving the most lumen output from the least wattage. Chip Binning Due to the manufacturing process of LED chips, it is difficult to produce exactly the same colour temperature on consecutive batches. This factor can cause major issues to installers when purchasing products for on-going projects over a prolonged time period, or if simply requiring product replacements. we combat this issue via three factors, 1. Using high quality LED chips with a maximum variance of 100-300 kelvins. 2. Securing a bulk of LED components at a time and implementing a rigorous batch stocking process. 3. A photometric report archive of all sold LED Strip enables us to trace back the exact colour temperature of any order. Service LED Strip can be a technically challenging product. Due to its attributes, users often use it in a variety of innovative ways. we strive to simplify the process and assist our customers in any way we can. Please feel free to give us a call for any technical ad-vice, for help preparing lighting plans or to assist in the exploring of ideas, and we will be happy to help. /5

/6

we offer an array of Sin-gle Colour LED Strips to accommodate a wide range of applications; Single Colour LED Strip from Kitchen cabinet, cove and feature lighting, to general lighting and commercial applications. All our LED Strip is dimmable and compatible with a range of dimming protocols when installed with Drivers and Control Gear. Please refer to our Drivers category pages 45-48 and Control Gear section on page 59 for further information. All Single colour LED Strips are available in the following colour temperatures. DUAL COLOUR LED STRIPS 2700K 3000K 4000K 6000K EXTRA WARM WHITE WARM WHITE COOL WHITE DAYLIGHT BLUE /7

Single Colour LED Strip 4.8 watts/m INSTALLATION EXAMPLES - General Low level Lighting - Cupboards - Under kitchen Cabinets/ Islands - Feature lighting - And many more... DESCRIPTION Our 4.8 watts / m LED Strip is our entry level model, perfect for mood setting and lighting up features. Accessories - For Clips and Connectors please view our LED Strip Accessories section on pages 26-30. Note: Each 5m reel of IP65 rated LED Strip comes with 5 end-caps & 15 mounting brackets as standard. TECHNICAL INFORMATION 12-14cm* SINGLE COLOUR LED STRIPS /8 Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Dimensions for IP65 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life ORDER CODE LS-1WW27K LS-1WW30K LS-1CW LS-1B LS-1IPWW27K LS-1IPWW30K LS-1IPCW LS-1IPDL LS-1IPB 4.8 watts / m 3528 SMD 60 PCB IP20/IP65 Self Adhesive (300 MP) 24v 5000 mm * 8mm 5000 mm * 10 mm Every 100 mm Ra>80 120 A+ 35,000 Hours IP RATING COLOUR TEMP LUMENS / m LUMENS / watt IP20 IP20 IP20 IP20 IP65 IP65 IP65 IP65 IP65 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White BLUE 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White 6000K - Daylight BLUE *Max. light reach saturation point for homogeneity Image for illustration pusposes 300 lm 315 lm 330 lm *75.42 lm 300 lm 315 lm 330 lm 360 lm *75.42 lm IP20 5cm 63 lm/w 66 lm/w 69 lm/w 16 lm/w 63 lm/w 66 lm/w 69 lm/w 75 lm/w 16 lm/w *The BLUE lumens value has been calculated using a mcd (millicandela) to lumens converter.

Single Colour LED Strip 9.6 watts/m INSTALLATION EXAMPLES - General Low level Lighting - Cupboards - Under kitchen Cabinets/ Islands - Feature lighting - And many more... DESCRIPTION Our 9.6 watts / m LED Strip is double the lumen output of our 4.8 watt model. This product can be used for much of the same purpose, especially for installations that require a higher light output. Accessories - For Clips and Connectors please view our LED Strip Accessories section on pages 26-30. Note: Each 5m reel of IP65 rated LED Strip comes with 5 endcaps & 15 mounting brackets as standard. TECHNICAL INFORMATION 20-22cm* Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Dimensions for IP65 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life ORDER CODE LS-3WW27K LS-3WW30K LS-3CW LS-3DL LS-3B LS-3IPWW27K LS-3IPWW30K LS-3IPCW LS-3IPDL LS-3IPB 9.6 watts / m 3528 SMD 120 PCB IP20/IP65 Self Adhesive (300 MP) 24v 5000 mm * 8mm 5000 mm * 10 mm Every 50 mm Ra>80 120 A+ 35,000 Hours IP RATING COLOUR TEMP LUMENS / m LUMENS / watt IP20 IP20 IP20 IP20 IP20 IP65 IP65 IP65 IP65 IP65 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White 6000K - Daylight BLUE 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White 6000K - Daylight BLUE *Max. light reach saturation point for homogeneity Image for illustration pusposes 600 lm 630 lm 660 lm 720 lm *151 lm 600 lm 630 lm 660 lm 720 lm *151 lm IP20 5cm 63 lm/w 66 lm/w 69 lm/w 75 lm/w 16 lm/w 63 lm/w 66 lm/w 69 lm/w 75 lm/w 16 lm/w SINGLE COLOUR LED STRIPS /9 *The BLUE lumens value has been calculated using a mcd (millicandela) to lumens converter.

Single Colour LED Strip 12 watts/m INSTALLATION EXAMPLES -- General lighting -Work Tops - Cove lighting - Signage lighting - Feature lighting - And many more... DESCRIPTION Our 12 watts/m LED Strip is the most efficient and best value Strip we offer, reaching up to 120 lm per watt. This product is suitable for a wide range of applications. Accessories - For Clips and Connectors please view our LED Strip Accessories section on pages 26-30. Note: Each 5m reel of IP65 rated LED Strip comes with 5 endcaps & 15 mounting brackets as standard. Note: 12 watts/m LED Strip must be mounted on an Aluminium Extrusion to guarantee product performance and Teucer warranty. 25-30cm* TECHNICAL INFORMATION SINGLE COLOUR LED STRIPS /10 Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Dimensions for IP65 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life ORDER CODE LS-4WW27K(S) LS-4WW30K (S) LS-4CW(S) LS-4DL(S) LS-4B(S) LS-4PWW27K(S) LS-4IPWW30K(S) LS-4IPCW(S) LS-4IPDL(S) LS-4IPB(S) 12 watts / m 2835 SMD 60 PCB IP20/IP65 Self Adhesive (300 MP) 24v 5000 mm * 10mm 5000 mm * 12.5 mm Every 100 mm Ra>80 120 A+ 35,000 Hours IP RATING COLOUR TEMP LUMENS / m LUMENS / watt IP20 IP20 IP20 IP20 IP20 IP65 IP65 IP65 IP65 IP65 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White 6000K - Daylight BLUE 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White 6000K - Daylight BLUE *Max. light reach saturation point for homogeneity Image for illustration pusposes IP20 1320 lm 1350 lm 1380 lm 1440 lm *188.50 lm 1320 lm 1350 lm 1380 lm 1440 lm *188.50 lm 110 lm/w 112.50 lm/w 115 lm/w 120 lm/w 15.70 lm/w 110 lm/w 112.50 lm/w 115 lm/w 120 lm/w 15.70 lm/w *The BLUE lumens value has been calculated using a mcd (millicandela) to lumens converter.

Single Colour LED Strip 19.2 watts/m INSTALLATION EXAMPLES - General lighting - Tube/ Track lighting Replacement - Ceiling/ Wall coves and features - Signage Lighting - Feature lighting (No dotted effect) - And many more... DESCRIPTION The 19.2 watts/m LED Strip is our most diverse high output strip yet and can be used for almost all General Lighting purposes. Available in a Double and Single Row version, this product is perfect for all bright high-end finishes. Special Feature - This product in a Single Row IP20 finish can achieve a linear lighting effect in any Aluminium Extrusion. Please refer to page 31 for further details. Note: 19.2 watts/m LED Strip must be mounted on an Aluminium Extrusion (excluding Teucer AL-0) to guarantee product performance and Teucer warranty. 30-36cm* TECHNICAL INFORMATION Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Dimensions for IP65 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life ORDER CODE LS-5WW27K LS-5WW30K LS-5CW LS-5DL LS-5B LS-5IPWW27K LS-5IPWW30K LS-5IPCW LS-5IPDL LS-5IPB 19.2 watts / m 3528 SMD 240 PCB IP20/IP65 Self Adhesive (300 MP) 24v 5000 mm * 10mm 5000 mm * 17.5 mm IP20: Every 25 mm, IP65: Every 50 mm Ra>80 120 A+ 35,000 Hours IP RATING COLOUR TEMP LUMENS / m LUMENS / watt IP20 IP20 IP20 IP20 IP20 IP65 IP65 IP65 IP65 IP65 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White 6000K - Daylight BLUE 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White 6000K - Daylight BLUE *Max. light reach saturation point for homogeneity Image for illustration pusposes 1680 lm 1800 lm 1920 lm 2160 lm *302 lm 1680 lm 1800 lm 1920 lm 2160 lm *302 lm IP20 5cm 88 lm/w 94 lm/w 100 lm/w 110 lm/w 31 lm/w 88 lm/w 94 lm/w 100 lm/w 110 lm/w 31 lm/w SINGLE COLOUR LED STRIPS /11 *The BLUE lumens value has been calculated using a mcd (millicandela) to lumens converter.

Single Colour LED Strip 28.8 watts/m INSTALLATION EXAMPLES - General lighting - Wall wash effect - Tube/ Track lighting Replacement - Ceiling/ Wall coves and features - Signage Lighting - And many more... DESCRIPTION Our 28.8 watts/m LED Strip is our highest output strip and can be used for all general lighting purposes. This strip is available in a Double Row version making it the ideal product for integration with larger Extrusions and for areas that require high levels of light. Note: 28.8 watts/m LED Strip must be mounted on an Aluminium Extrusion to guarantee product performance and Teucer warranty. 35-42cm* TECHNICAL INFORMATION SINGLE COLOUR LED STRIPS Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life 28.8 watts / m 5050 SMD 120 PCB IP20 Self Adhesive (300 MP) 24v 5000 mm * 15mm Every 50 mm Ra>80 120 A+ 35,000 Hours *Max. light reach saturation point for homogeneity Image for illustration pusposes ORDER CODE IP RATING COLOUR TEMP LUMENS / m LUMENS / watt 5cm IP20 /12 LS-6WW27K LS-6WW30K LS-6CW LS-6DL IP20 IP20 IP20 IP20 2700K - Extra Warm White 3000K - Warm White 4000K - Cool White 6000K - Daylight 2400 lm 2420 lm 2520 lm 2640 lm 83 lm/w 84 lm/w 88 lm/w 94 lm/w

/14

Our new Tunable White range consists of combining Extra Warm White and Daylight LED Chips on the same Tunable White LED Strip PCB board, this in turn allows users to mix through almost every Kelvin variation from 2500k to 6000k. This LED Strip category is recommended for installations that require the ability to blend-in and produce a variety of moods. Each LED Strip comes as standard with a high Colour Rendering Index (CRI), allowing for a crisp finish throughout the colour scale. All our LED Strips are dimmable and compatible with a range of protocols when installed with Drivers and Control Gear. Please refer to our Drivers category on pages 45-58 and Control Gear section on page 59 for further information. TUNABLE WHITE LED STRIPS 2500K EXTRA WARM WHITE TUNABLE WHITE 6000K DAYLIGHT colour temperature variances /15

Tunable White LED Strip 9.6 watts/m INSTALLATION EXAMPLES - General Low level Lighting - Under kitchen Cabinets/ Islands - Cupboards/ shelving - Feature lighting - And many more... DESCRIPTION Our 9.6w/m Tunable White LED Strip offers a kelvin range of 2700k 6000k, ideal for feature lighting and mood setting. Accessories - For Clips and Connectors please view our LED Strip Accessories section on pages 26-30. Note: Each 5m reel of IP65 rated LED Strip comes with 5 x end- caps & 15 mounting brackets as standard. 15-18cm* TECHNICAL INFORMATION TUNABLE WHITE LED STRIPS Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Dimensions for IP65 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life 9.6 watts / m 3528 SMD 120 PCB IP20/IP65 Self Adhesive (300 MP) 24v 5000 mm * 8mm 5000 mm * 10 mm Every 100 mm Ra>80 120 A+ 35,000 Hours *Max. light reach saturation point for homogeneity Image for illustration pusposes IP20 /16 ORDER CODE IP RATING COLOUR TEMP LUMENS / m LUMENS / watt LS-3TW LS-3IPTW IP20 IP65 2700K - 6000K, Tunable White 2700K - 6000K, Tunable White 360 lm - 780 lm 360 lm - 780 lm 81 lm/w 81 lm/w

Tunable White LED Strip 19.2 watts/m INSTALLATION EXAMPLES - General lighting - Ceiling / Wall Coves - Feature lighting - And many more... DESCRIPTION Our 19.2w /m Tunable White LED Strip offers a kelvin range of 2500k 6000k. Featuring a CRI above 90, ensures delivery of a clean finish and crisp colour consistency. Accessories - For Clips and Connectors please view our LED Strip Accessories section on pages 26-30. Note: 19.2 watts/m LED Strip must be mounted on an Aluminium Extrusion (excluding Teucer AL-0) to guarantee product performance and Teucer warranty. 20-24cm* TECHNICAL INFORMATION Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life 19.2 watts / m 3528 SMD 120 PCB IP20 Self Adhesive (300 MP) 24v 5000 mm * 10mm Every 50 mm Ra>90 120 A+ 35,000 Hours *Max. light reach saturation point for homogeneity Image for illustration pusposes 5cm IP20 TUNABLE WHITE LED STRIPS ORDER CODE IP RATING COLOUR TEMP LUMENS / m LUMENS / watt /17 LS-5TW IP20 2500K - 6000K, Tunable White 600 lm - 1300 lm 68lm/w

/18

Our RGB range consists of Red, Green and Blue 5050 LED Chips, allowing you to blend through the colour scale; available in a variety of RGB Colour LED Strip lumen outputs. All our RGB LED Strips are dimmable and compatible with a range of protocols when installed with Drivers and Control Gear. Please re-fer to our Drivers category on pages 45-58 and Control Gear section on page 59 for further information. RGB LED STRIPS RGB COLOUR SCALE /19

/20

RGB LED Strip 7.2 watts/m INSTALLATION EXAMPLES - Cupboards - Stairs - Under kitchen Cabinets/ Islands - Feature lighting - And many more... DESCRIPTION Our 7.2 watts/m LED Strip is our entry level RGB model, ideal for mood setting and for adding colour to features. Accessories - For Clips and Connectors please view our LED Strip Accessories section on pages 26-30. Note: Each 5m reel of IP65 rated LED Strip comes with 5 endcaps & 15 mounting brackets as standard. 8-13cm* TECHNICAL INFORMATION Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life 7.2 watts / m 5050 SMD 30 PCB IP65 Self Adhesive (300 MP) 24v 5000 mm * 12.5mm Every 166 mm Ra>80 120 A+ 35,000 Hours * Max. light reach saturation point for homogeneity Image for illustration pusposes 7.2W 16.6cm RGB LED STRIPS ORDER CODE IP RATING COLOUR TEMP LUMENS / m LUMENS / watt /21 LS-2IPRGB IP65 RGB *160 lm 22 lm/w * Our RGB lumens value has been calculated using a (mcd) millicandela to lumens converter.

RGB LED Strip 14.4 watts/m INSTALLATION EXAMPLES - Ceiling/ Wall coves and features - Bar Tops - Signage Lighting - Feature lighting - And many more... DESCRIPTION Our 14.4 watts/m LED Strip is our most popular RGB model. It features a high lumen output which makes this product perfect for a wide range of applications. Accessories - For Clips and Connectors please view our LED Strip Accessories section on pages 26-30. Note: Each 5m reel of IP65 rated LED Strip comes with 5 endcaps & 15 mounting brackets as standard. Note: 14.4 watts/m LED Strip must be mounted on an Aluminum Extrusion to guarantee product performance and Teucer warranty. 10-16cm* TECHNICAL INFORMATION RGB COLOUR LED STRIPS Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Dimensions for IP65 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life 14.4 watts / m 5050 SMD 60 PCB IP20/IP65 Self Adhesive (300 MP) 24v 5000 mm * 10mm 5000 mm * 12.5mm Every 100 mm Ra>80 120 A+ 35,000 Hours * Max. light reach saturation point for homogeneity Image for illustration pusposes 14.4W 10cm IP20 /22 ORDER CODE IP RATING COLOUR TEMP LUMENS / m LUMENS / watt LS-4RGB IP20 RGB *339 lm 24 lm/w LS-4IPRGB IP65 RGB *339 lm 24 lm/w * Our RGB lumens value has been calculated using a (mcd) millicandela to lumens converter.

RGB LED Strip 28.8 watts/m INSTALLATION EXAMPLES - Wall Wash effect - Ceiling/ Wall coves and features - Bar Tops - Signage Lighting - Feature lighting - And many more... DESCRIPTION Our 28.8 watts/m LED Strip is the brightest RGB strip we produce and the perfect solution if you are looking for a wallwash effect, featuring a high lumen output within a width of only 15mm. Note: 28.8 watts/m LED Strip must be mounted on an Aluminum Extrusion to guarantee product performance and Teucer warranty. 13-20cm* TECHNICAL INFORMATION Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life 28.8 watts / m 5050 SMD 120 PCB IP20 Self Adhesive (300 MP) 24v 5000 mm * 15mm Every 50 mm Ra>80 120 A+ 35,000 Hours * Max. light reach saturation point for homogeneity Image for illustration pusposes 28.8W 5cm IP20 RGB COLOUR LED STRIPS ORDER CODE IP RATING COLOUR TEMP LUMENS / m LUMENS / watt /23 LS-6RGB RGB IP20 *678 lm 24 lm/w * Our RGB lumens value has been calculated using a (mcd) millicandela to lumens converter.

/24

Our RGBW LED Strip consists of Red, Green and Blue/ Single Colour 5050 LED Chips on the same PCB board. This in turn allows users to switch RGBW Colour LED Strip from a Clean Single Colour (3000k) to Colour Changing (RGB) on the same LED Strip. All our LED Strips are controllable and compatible with a range of protocols when installed with Drivers and Control Gear. Please refer to our Drivers category on pages 48-58 and Control Gear section on page 59 for further information. WARM WHITE RGB COLOUR /25

RGBW LED Strip 17.3 watts/m INSTALLATION EXAMPLES - Cove Lighting - Cupboards - Stairs - Under kitchen Cabinets/ Islands - Feature lighting - And many more... DESCRIPTION Our 17.3 watts/m RGB/W LED Strip allows users to control both RGB and Warm White - 3000k LED Chips from a single run, thus making this a versatile unit that can be used in a number of applications. Accessories - For Clips and Connectors please view our LED Strip Accessories section on pages 26-30. Note: Each 5m reel of IP65 rated LED Strip comes with 5 endcaps & 15 mounting brackets as standard. TECHNICAL INFORMATION 15cm* 10-16cm* RGBW COLOUR LED STRIPS Max Wattage LED Chip LEDs per Meter Construction IP rating Fixture Voltage Dimensions for IP20 Dimensions for IP65 Cut Distance Colour Rendering Index Beam Angle Energy Efficiency Rating Estimated Life 17.3 watts / m 5050 SMD 60 PCB IP20/IP65 Self Adhesive (300 MP) 24v 5000 mm * 12mm 5000 mm * 15mm Every 166 mm Ra>80 120 A+ 35,000 Hours * Max. light reach saturation point for homogeneity Image for illustration pusposes 17.28 W/M IP20 16.6cm /26 ORDER CODE IP RATING COLOUR TEMP LUMENS / m LUMENS / watt LS-4RGBW LS-4IPRGBW IP20 IP65 RGB + 3000k RGB + 3000k *160 lm - 600 lm *160 lm - 600 lm 22-83 lm/w 22-83 lm/w * Our RGB lumens value has been calculated using a (mcd) millicandela to lumens converter.

Maximum runs of LED Strip will vary depending on LED Strip wattage and the length of connecting cable used from LED Driver to LED Strip. The longer the run of LED Strip, the shorter the amount of connecting cable that will be left over in order to reach an LED Driver, vice versa. e.g. If the max length of your chosen LED Strip wattage is 16 meters and your specific installation requires a 15 meter Strip run, than you will be left with a 1 meter connecting cable to the driver. maximum LED STRIP runs guide LED Driver Power cable LED strip Maximum Strip Runs (Power Cable + LED Strip) 16 meters: 4.8 watts/m 7.2 watts/m 9.6 watts/m 12 watts/m 11 meters: 14.4 watts/m 17.3 watts/m 19.2 watts/m 6 meters: 28.8 watts/m LED Strip comes as standard with a 15cm power feed on either end of each 5 meter reel. If you wish to expand this feed, please ensure you use the correct wire gauge: Power Cable recommendations: > 0.50mm 2 for 2 & 3 core cable > 0.30mm 2 for 4 & 5 core cables. Please choose your cable type and length based on your LED Strip requirements. All Teucer cabling is sold by the meter. ORDER CODE WC - 2 CORE WC - 3 CORE DESCRIPTION White round PVC 2 core cable 0.50mm 2 White round PVC 3 core cable 0.50mm 2 COMPATIBILITY Single Colour LED Strip Tunable White LED Strip RGBW COLOUR LED STRIPS WC - 4 CORE White round PVC 4 core cable 0.30mm 2 RGB LED Strip /27 WC - 4 CORE White round PVC 5 core cable 0.30mm 2 RGBW LED Strip

Custom Service We are happy to offer the following services; 1. 2. Cut or solder on LED Strip to your desired length. Solder on required wire to reach your Drivers / Receivers. 3. Professionally IP rate your LED Strip if needed. CUSTOM SERVICE 4. 5. 6. Cut Aluminium Extrusions and Diffusers to your desired length. Attach your LED Strip onto your chosen Extrusion and Clip on the Diffuser. We will organize, label and pack your products to meet your requirements. /28 7. Dispatch goods to branch or site.

LED Strip connectors Single Colour Strip Connectors (2 core cable): We offer LED Strip Connectors for several strip wattages and types including; Single Colour, Tunable White, RGB and RGBW. Strip Connectors save both time and effort, as there is no need for soldering. Cut your LED Strip to your desired length and simply clip on for a safe, fast and easy connection. These products are useful for Driver/Receiver connections, extending strip lengths and corner installations. Please ensure you acquire our IP65 Connector Kit when installing IP65 rated LED Strip in conjunction with a Strip Connector. 8mm Single Colour Connectors - 4.8 watts/m, 9.6 watts/m LED Strips. 10mm Single Colour Connectors - 12 watts/m LED Strips. CONNECTOR FEATURE PRODUCT IMAGE 8mm CONNECTOR ORDER CODE 10mm CONNECTOR ORDER CODE Link two separate lengths of LED Strip to make a continuous run. LS-10 LS-20 Start a new run of LED Strip. (Includes 15cm of cable length) LS-11 LS-21 LED STRIP CONNECTORS Start a new run of LED Strip. (Includes 50cm of cable length) For links around Corners/ angles. Comes with15cm of cable between each Connector end. LS-11(50) LS-12 LS-21(50) LS-22 /30 For 90 degree bends. Each Connector is attached to a rigid PCB board. LS-13 LS-23

Tunable White Strip Connectors (3 core cable): 8mm Tunable White Connectors - 9.6 watts/m LED Strips. 10mm Single Colour Connectors - 19.2 watts/m LED Strips. CONNECTOR FEATURE PRODUCT IMAGE 8mm CONNECTOR ORDER CODE CONNECTOR FEATURE 10mm CONNECTOR ORDER CODE Link two separate lengths of LED Strip to make a continuous run. LS-10(TW) LS-20(TW) Start a new run of LED Strip. (Includes 15cm of cable length) LS-11(TW) LS-21(TW) For links around corners and angles. (Includes 15cm of cable length between each Connector). LS-12(TW) LED STRIP CONNECTORS For 90 degree bends. Each Connector is attached to a rigid PCB. LS-13(TW) /31

RGB Strip Connectors (3 core cable): 10mm RGB Connectors - 7.2 watts/m and 14.4 watts/m RGB LED Strips. CONNECTOR FEATURE PRODUCT IMAGE 10mm CONNECTOR ORDER CODE Used to link two separate lengths of LED Strip to make a continuous run. LS-30 Start a new run of LED Strip. (Includes 15cm of cable length). LS-31 Start a new run of LED Strip. (Includes 50cm of cable length). LS-31(50) LED STRIP CONNECTORS For links around corners and angles. (Includes 15cm of cable length between each Connector). For 90 degree bends. Each Connector is attached to a rigid PCB. LS-32 LS-33 /32

RGBW Strip Connectors (3 core cable): 12mm RGBW Connectors - 17.3 watts/m RGBW LED Strips. CONNECTOR FEATURE PRODUCT IMAGE 12mm CONNECTOR ORDER CODE Used to link two separate lengths of LED Strip to make a continuous run. LS-30(RGBW) Start a new run of LED Strip. (Includes 15cm of cable length). LS-31(RGBW) For links around corners and angles. (Includes 15cm of cable length between each Connector). LS-32(RGBW) For 90 degree bends. Each Connector is attached to a rigid PCB. IP65 Connector Kit Please ensure you acquire our IP65 Connector Kit when customizing IP65 rated LED Strip reels. Each kit will contain 1 silicone tube (15ml), 5 strands of heat shrink and a set of instructions. Use Code: LS-IP65/GLUE LS-33(RGBW) LED STRIP CONNECTORS /33

/34

How to achieve a Linear effect with your LED Strip Linear Effect When LED Strip is installed in areas where its light source (LED Chips) is in view or positioned onto a reflective surface, a dotted effect can be noticed. In most applications such as cove lighting or some forms of feature lighting, this will not be a factor as LED Strips will be hidden away behind skirting boards or other interior features. However applications that do require LED Strip to be installed in view, users may wish to achieve a linear (no dotted effect). Our table below depicts a number of LED Strip, Aluminium Extrusion and Diffuser combinations in which a linear effect can be achieved. Note: Our Single Row I9.2 watts/ m LED Strip can achieve a linear effect in every Aluminium Extrusion / Opal Diffuser combination. ALUMINIUM EXTRUSION DIFFUSER TYPE LED STRIP AL-1 / AL-1i Opal 19.2 watts IP20 (LS-5) AL-2 / AL-2i Opal 9.6 watts (LS-3) 19.2 watts IP20 (LS-5) 19.2 watts Tunable White (LS-5TW) AL-5 / AL-5i Opal 19.2 watts IP20 (LS-5) AL-6 / AL-6i Opal 4.8 watts (LS-1) 7.2 watts (LS-2) 9.6 watts (LS-3) 9.6 watts Tunable White (LS-3TW) 12 watts (LS-4) 14.4 watts RGB (LS-4RGB) 17.3 watts RGBW (LS-4RGBW) LINEAR EFFECT 19.2 watts (LS-5) 19.2 watts (LS-5TW) /35 28.8 watts (LS-6) AL-7 Opal LS-5 IP20 (LS-5)

Aluminium Extrusions Aluminium Extrusions are vital to any LED Strip installation. All types of LED Strip may overheat when in use over long periods of time. This is most commonly the cause of premature product failures and the product peeling off from its installed surface area. Extrusions are designed to act as a heat sink which allows for heat to be dispersed away from vital components and into the aluminium housing helping to cool down the LED Strip. Diffuser Type OPAL FROSTED CLEAR Choose from a number of Extrusions to suit your desired finish and lighting effect. These products are designed to make your installation look good and long lasting. Extrusion & Diffuser available lengths Aluminium Extrusions are made from a 6063 Aluminium Alloy; due to its anti-corrosive resistance, good heat retention and workable properties, ensuring an easy but durable installation. 100cm available in stock 200cm available in stock ALUMINIUM EXTRUSIONS Our Diffusers are made from Polycarbonate, allowing them to be cut with ease and not crack as is commonly associated with other materials. custom lengths Bespoke lengths manufactured to order in the UK with fast delivery times. LED Strip can also be itted to produce a complete plug and play Led light bar via our Custon Service. (max. length of 200cm) /36

Aluminium Extrusions AL-0 EXTRUSION TYPE Surface mounted Aluminium Extrusion for hidden applications; used purely for heat dissipation. This product does not feature a diffuser. Note: only use LED Strips 4.8w pm (LS-1) and 9.6w pm (LS-3) in conjunction with this extrusion. 10.19mm 13.43mm ORDER CODE LENGTH DIFFUSER CONSTRUCTION 4.1mm ALUMINIUM EXTRUSIONS AL-0/1M 1 meter n/a Aluminium Extrusion AL-0/2M 2 meter n/a Aluminium Extrusion /37

Aluminium Extrusions AL-1 EXTRUSION TYPE Surface mounted Aluminium Extrusion suitable for Single Row LED Strip. ACCESSORIES Each meter of AL-1 comes with 2 mounting Clips + 2 End Caps as standard. For additional units, use order code: AL-1/CLIP 12.3mm 17.1mm 8mm ALUMINIUM EXTRUSIONS /38 ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-1/1M AL-1/2M DIF-C/1M DIF-C/2M DIF-F/1M DIF-F/2M DIF-O/1M DIF-O/2M 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter n/a n/a Clear Clear Frosted Frosted Opal Opal Aluminium Extrusion Aluminium Extrusion

Aluminium Extrusions AL-1i EXTRUSION TYPE Inset Aluminium Extrusion suitable for Single Row LED Strip. ACCESSORIES Each meter of AL-1i comes with (2 x End Caps as standard). For additional units, use order code: AL-1i/ENDCAPS 23.1mm 12.3mm 17.1mm 8mm ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-1i/1M AL-1i/2M DIF-C/1M DIF-C/2M DIF-F/1M DIF-F/2M DIF-O/1M DIF-O/2M 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter n/a n/a Clear Clear Frosted Frosted Opal Opal Aluminium Extrusion Aluminium Extrusion ALUMINIUM EXTRUSIONS /39

Aluminium Extrusions AL-2 EXTRUSION TYPE Surface mounted Aluminium Extrusion suitable for Single Row LED Strip. ACCESSORIES Each meter of AL-1 comes with 2 mounting Clips + 2 End Caps as standard. 15.3mm For additional units, use order code: AL-2/CLIP 12.3mm 17.1mm ALUMINIUM EXTRUSIONS /40 ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-2/1M AL-2/2M DIF-C/1M DIF-C/2M DIF-F/1M DIF-F/2M DIF-O/1M DIF-O/2M 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter n/a n/a Clear Clear Frosted Frosted Opal Opal Aluminium Extrusion Aluminium Extrusion

Aluminium Extrusions AL-2i EXTRUSION TYPE Inset Aluminium Extrusion suitable for Single Row LED Strip. ACCESSORIES 23.1mm Each meter of AL-2i comes with 2 End Caps as standard. 15.3mm For additional units, use order code: AL-2i/ENDCAPS 12.3mm 17.1mm ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-2i/1M AL-2i/2M DIF-C/1M DIF-C/2M DIF-F/1M DIF-F/2M DIF-O/1M DIF-O/2M 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter n/a n/a Clear Clear Frosted Frosted Opal Opal Aluminium Extrusion Aluminium Extrusion ALUMINIUM EXTRUSIONS /41

Aluminium Extrusions AL-4 EXTRUSION TYPE Circular Aluminium Extrusion suitable for Single Row LED Strip. Can be installed via a Wall Bracket or suspended via Pendant Wires. ACCESSORIES Each meter of AL-4 comes with 2 End Caps as standard. 20.8mm For additional units use code: AL-4/CLIP 12.3mm 1.7mm ALUMINIUM EXTRUSIONS WALL BRACKET Use Code: AL-4 / BRACKET (2 Brackets + 2 End Caps) ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-4/1M AL-4/2M 1 meter 2 meter PENDANT WIRES Use Code: AL-4 / WIRE (2 Pendant Wires + 2 End Caps) n/a n/a Aluminium Extrusion Aluminium Extrusion /42 DIF-4C/1M DIF-4C/2M 1 meter 2 meter Clear Clear DIF-4F/1M 1 meter Frosted DIF-4F/2M 2 meter Frosted

Aluminium Extrusions AL-7 EXTRUSION TYPE 90 Degree surface mounted Aluminium Extrusion, suitable for Single Row LED Strip. ACCESSORIES Each meter of AL-7 comes with 2 Mounting Clips + 2 End Caps as standard. For additional units, use order code: AL-7/CLIP 18.5mm 19.3mm 25.7mm 12.2mm ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-7/2M 2 meter n/a Aluminium Extrusion ALUMINIUM EXTRUSIONS DIF-7C/2M 2 meter Clear DIF-7F/2M DIF-7O/2M 2 meter 2 meter Frosted Opal /43

Aluminium Extrusions AL-5 EXTRUSION TYPE Surface mounted Aluminium Extrusion, suitable for Single and Double Row LED Strip. ACCESSORIES Each meter of AL-5 comes with 2 Mounting Clips + 2 End Caps as standard. For additional units, use code: AL-5/CLIP 20.2mm 23.5mm 10mm ALUMINIUM EXTRUSIONS /44 ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-5/1M AL-5/2M DIF-5C/1M DIF-5C/2M DIF-5F/1M DIF-5F/2M DIF-5O/1M DIF-5O/2M 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter n/a n/a Clear Clear Frosted Frosted Opal Opal Aluminium Extrusion Aluminium Extrusion

Aluminium Extrusions AL-5i EXTRUSION TYPE Inset Aluminium Extrusion suitable for Single and Double Row LED Strip. ACCESSORIES Each meter of AL-5i comes with 2 End Caps as standard. For additional units, use code: AL-5i/ENDCAPS 30.6mm 20.2mm 23.5mm 10mm ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-5i/1M AL-5i/2M DIF-5C/1M DIF-5C/2M DIF-5F/1M DIF-5F/2M DIF-5O/1M DIF-5O/2M 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter n/a n/a Clear Clear Frosted Frosted Opal Opal Aluminium Extrusion Aluminium Extrusion ALUMINIUM EXTRUSIONS /45

Aluminium Extrusions AL-6 This product can also be installed via suspension cables Code: AL-6/WIRE (2 x pendant wires + 2 x end caps) EXTRUSION TYPE Surface mounted or flush Aluminium Extrusion suitable for Single and Double Row LED Strip. This Extrusion Can be suspended via pendant wires or drilled onto surfaces. ACCESSORIES Each meter of AL-6 comes with 2 End Caps as standard. For additional units, use code: AL- 6/ENDCAPS PENDANT WIRES Use Code: AL-6 / WIRE (2 pendant wires + 2 End Caps) 34.9mm 33.6mm 35mm ALUMINIUM EXTRUSIONS /46 ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-6/1M AL-6/2M DIF-6C/1M DIF-6C/2M DIF-6F/1M DIF-6F/2M DIF-6O/1M DIF-6O/2M 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter n/a n/a Clear Clear Frosted Frosted Opal Opal Aluminium Extrusion Aluminium Extrusion

Aluminium Extrusions AL-6i EXTRUSION TYPE Inset Aluminium Extrusion suitable for Single and Double Row LED Strip. This Extrusion can be recessed into walls and ceilings via our Recess Bracket. ACCESSORIES 56.2mm Each meter of AL-6i comes with 2 End Caps as standard. For additional units use code: AL-6i/ENDCAPS 34.9mm 33.6mm RECESS BRACKET Use Code: AL-6i / BRACKET (2 brackets) 35mm ORDER CODE LENGTH DIFFUSER CONSTRUCTION AL-6i/1M AL-6i/2M DIF-6C/1M DIF-6C/2M DIF-6F/1M DIF-6F/2M DIF-6O/1M DIF-6O/2M 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter 1 meter 2 meter n/a n/a Clear Clear Frosted Frosted Opal Opal Aluminium Extrusion Aluminium Extrusion ALUMINIUM EXTRUSIONS /47

24v Constant Voltage LED DRIVERS Our Constant Voltage LED Drivers can be used in conjunction with all Teucer Control Gear and Decoders. Alternatively, they may be used independently if only an on/off function is required. INPUT POWER +/- 220-250v On/Off LED DRIVER LED STRIP 1/10V DIMMER LED DRIVER 1/10V DECODER LED STRIP Control LED Strip via 1-10v Dimmer 1/10V SIGNAL Control LED Strip via 1-10v Lighting System DIMMING SYSTEM LED DRIVER 1/10V DECODER 1/10V SIGNAL LED STRIP Control LED Strip via Dali Lighting System DIMMING SYSTEM LED DRIVER DALI DECODER LED STRIP DALI SIGNAL LED DRIVER CONTROL GEAR LED STRIP LED DRIVERS /48 Constant Voltage LED Drivers feature a robust aluminium housing and IP67 rating as standard, offering a lower operating temperature and prolonged product lifespan.

LED Strip / Constant Voltage Driver compatibility Chart Our Compatibility chart lists suitable drivers based on LED Strip wattage and lengths. LED Strip Wattages 4.8w p/m 7.2w p/m 9.6w p/m 12w p/m 14.4w p/m 17.3w p/m 19.2w p/m 28.8w p/m LED Strip Runs (Meters) 24v Constant Voltage Standard LED Drivers 0.5M 10w - LD-IP10/24 10w - LD-IP10/24 20W - LD-IP20/24 20W - LD-IP20/24 10w - LD-IP10/24 10W - LD-IP10/24 20W - LD-IP20/24 20W - LD-IP20/24 1M 10w - LD-IP10/24 10w - LD-IP10/24 20W - LD-IP20/24 20W - LD-IP20/24 20W - LD-IP20/24 20W - LD-IP20/24 30W - LD-IP30/24 60W - LD-IP60/24 1.5M 10w - LD-IP10/24 20W - LD-IP20/24 20W - LD-IP20/24 20W - LD-IP20/24 30W - LD-IP30/24 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 2M 20W - LD-IP20/24 20W - LD-IP20/24 30W - LD-IP30/24 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 60W - LD-IP60/24 2.5M 20W - LD-IP20/24 30W - LD-IP30/24 60W - LD-IP60/24 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 60W - LD-IP60/24 3M 20W - LD-IP20/24 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 60W - LD-IP60/24 60W - LD-IP60/24 3.5M 20W - LD-IP20/24 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 60W - LD-IP60/24 4M 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 60W - LD-IP60/24 4.5M 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 5M 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 200w - LD-IP200/24 5.5M 30W - LD-IP30/24 60W - LD-IP60/24 60W - LD-IP60/24 200w - LD-IP200/24 6M 60W - LD-IP60/24 60W - LD-IP60/24 200w - LD-IP200/24 6.5M 60W - LD-IP60/24 60W - LD-IP60/24 7M 60W - LD-IP60/24 60W - LD-IP60/24 7,5M 60W - LD-IP60/24 60W - LD-IP60/24 200w - LD-IP200/24 8M 60W - LD-IP60/24 200W - LD-IP200/24 200w - LD-IP200/24 8,5M 60W - LD-IP60/24 200W - LD-IP200/24 200w - LD-IP200/24 9M 60W - LD-IP60/24 200W - LD-IP200/24 200w - LD-IP200/24 9.5M 60W - LD-IP60/24 200w - LD-IP200/24 200W - LD-IP200/24 10M 60W - LD-IP60/24 200w - LD-IP200/24 200W - LD-IP200/24 10.5M 60W - LD-IP60/24 200w - LD-IP200/24 11M 11.5M 12M 12.5M 60W - LD-IP60/24 200w - LD-IP200/24 200w - LD-IP200/24 200w - LD-IP200/24 200w - LD-IP200/24 200w - LD-IP200/24 200w - LD-IP200/24 200w - LD-IP200/24 LED DRIVERS 13M 200w - LD-IP200/24 13,5M 200w - LD-IP200/24 /49 14M 200w - LD-IP200/24 14.5M 200w - LD-IP200/24 200w - LD-IP200/24 15M 200w - LD-IP200/24 200w - LD-IP200/24

LED Driver 10w Constant Voltage DC Voltage Voltage Tolerance Rated Current Voltage Range Power Factor (Typ) AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 24v ±0.5V 0.42A 180~265VAC PF 0.65 0.10A 30A Recovers automatically after fault condition is removed -25~+45 C EN61347-1, EN61347-2-13 EN61000-3-3, EN61547 105mm Weight: 0.19kg 30mm 20mm ORDER CODE WATTAGE INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LD-IP10/24 10 watts 180-265vAC 24vDC IP67 waterproof LED Driver 20w Constant Voltage STANDARD LED DRIVERS DC Voltage Voltage Tolerance Rated Current Voltage Range Power Factor (Typ) AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 24v ±0.5V 0.84A 180~265VAC PF 0.65 0.18A 30A Recovers automatically after fault condition is removed -25~+45 C EN61347-1, EN61347-2-13 EN61000-3-3, EN61547 105mm 162mm Weight: 0.28kg 30mm 20mm /50 ORDER CODE WATTAGE INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LD-IP20/24 20 watts 180-265vAC 24vDC IP67 waterproof

LED Driver 30w Constant Voltage DC Voltage Voltage Tolerance Rated Current Voltage Range Power Factor (Typ) AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 24v ±0.5V 1.25A 180~265VAC PF 0.65 0.28A 30A Recovers automatically after fault condition is removed -25~+45 C EN61347-1, EN61347-2-13 EN61000-3-3, EN61547 105mm 217mm Weight: 0.33kg 30mm 20mm ORDER CODE WATTAGE INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LD-IP30/24 30 watts 180-265vAC 24vDC IP67 waterproof LED Driver 60w Constant Voltage DC Voltage Voltage Tolerance Rated Current Voltage Range Power Factor (Typ) AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 24v ±0.5V 2.5A 90~264VAC PF 0.65 0.70A 30A Recovers automatically after fault condition is removed -25~+45 C EN61347-1, EN61347-2-13 EN61000-3-3, EN61547 105mm 216mm Weight: 0.55kg 30mm 42mm 20mm 30mm STANDARD LED DRIVERS ORDER CODE WATTAGE INPUT VOLTAGE OUTPUT VOLTAGE IP RATING /51 LD-IP60/24 60 watts 90-264vAC 24vDC IP67 waterproof

LED Driver 100w Constant Voltage DC Voltage Voltage Tolerance Rated Current Voltage Range Power Factor (Typ) AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 24v ±0.5V 4.2A 90~264VAC PF 0.90 01.40A 30A Recovers automatically after fault condition is removed -25~+50 C EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4kv) 105mm 196mm Weight: 1.03kg 30mm 68mm 20mm 39.8mm ORDER CODE WATTAGE INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LD-IP100/24 100 watts 90-264vAC 24vDC IP67 waterproof LED Driver 150w Constant Voltage STANDARD LED DRIVERS DC Voltage Voltage Tolerance Rated Current Voltage Range Power Factor (Typ) AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 24v ±0.5V 6.25A 180~264VAC PF 0.90 0.45A 30A Recovers automatically after fault condition is removed -25~+50 C EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) 105mm 221mm Weight: 1.05kg 30mm 68mm 20mm 39mm /52 ORDER CODE WATTAGE INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LD-IP150/24 150 watts 180-264vAC 24vDC IP67 waterproof

LED Driver 200w Constant Voltage DC Voltage Voltage Tolerance Rated Current Voltage Range Power Factor (Typ) AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 24v ±0.5V 8.4A 90~264VAC PF 0.90 0.88A 40A Recovers automatically after fault condition is removed -40~+60 C EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) Weight: 1.3kg 105mm 221mm 30mm 68mm 20mm 39.8mm ORDER CODE WATTAGE INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LD-IP200/24 200 watts 90-264vAC 24vDC IP67 waterproof STANDARD LED DRIVERS /53

Decoder 0-10V Our 0-10v Decoder is a single output + module, featuring PWM smooth dimming from 0-100%. This unit is compact for easy installation and is compatible with most 0/1-10v LED protocols. FEATURES 1T Input 1-10V Input 12-36VDC - + - 35mm - 1 Channel 0/1-10v signal input. - PWM Dimming Output. - 0-100% smooth dimming range. - Compatible with all 0/1-10v protocols. - 12vDC 36vDC. 20mm 100mm ORDER CODE INPUT VOLTAGE CURRENT OUTPUT VOLTAGE DIM-0101CH 12-36vDC 1 x 8A 1x(96-288)w Constant Voltage Decoder Dali Our 4 channel DALI Decoder can control both Single Colour and RGB/W LED Strip. This unit is compatible with most standard Dali protocols and is STANDARD LED DRIVERS equipped with a digital display allowing the setting of both manual and automatic signal addresses. FEATURES - Compatible with most Dali protocols. - Digital DALI address Display. - Four independently addressable DALI channels. - Manual and Automatic DALI address settings. 45.5 45.5mm 18.6mm 170.4mm 18.6 /54 ORDER CODE CURRENT INPUT VOLTAGE OUTPUT VOLTAGE DIM-DALI1CH 12-36vDC 4 x 5A 4x(60-180)w Constant Voltage

/55

Dimmable LED DRIVERS Our Mains Dimmable LED Drivers can be used in conjunction with most Leading/Trailing edge dimmers and automat-ed mains lighting systems. INPUT POWER +/- 220-250v MAINS DIMMER MAINS DIM DRIVER LED STRIP DIMMING SYSTEM MAINS DIM DRIVER LED STRIP STANDARD LED DRIVERS LED STRIP / Dimmable Driver compatibility chart Please view our compatibility chart before purchasing any Dimmable LED Drivers. Input Output /56 AC Dimmer / Home Automated System Lighting Systems Single Colour LED Strip

Our compatibility chart below lists suitable Dimmable Drivers based on LED Strip wattage and Length. LED Strip Wattages 4.8w p/m 9.6w p/m 12w p/m 19.2w p/m 28.8w p/m LED Strip Runs (Meters) Mains Dimmable LED Drivers 0.5M 20W - LDD-20/24 20W - LDD-20/24 1M * 20W - LDD-20/24 20W - LDD-20/24 * * 1.5M * 20W - LDD-20/25 * 45W - LDD-45/24 45W - LDD-45/24 2M * 45W - LDD-45/24 * 60W - LDD-IP60/24 60W - LDD-IP60/24 2.5M 20W - LDD-20/24 * 45W - LD-45/24 80W - LDD-IP80/24 80W - LDD-IP80/24 3M 20W - LDD-20/24 45W - LDD - 45/24 60W - LDD-IP60/24 80W - LDD-IP80/24 80W - LDD-IP80/24 3.5M 20W - LDD-20/25 45W - LDD - 45/24 60W - LDD-IP60/24 100W - LDD-IP100/24 100W - LDD-IP100/24 4M * 45W - LDD - 45/25 80W - LDD-IP80/24 100W - LDD-IP100/24 100W - LDD-IP100/24 4.5M * 60W - LDD-IP60/24 80W - LDD-IP80/24 150W - LDD-150/24 150W - LDD-150/24 5M * 60W - LDD-IP60/24 80W - LDD-IP80/24 150W - LDD-150/24 150W - LDD-150/24 5.5M * 80W - LDD-IP80/24 100W - LDD-IP100/24 150W - LDD-150/24 150W - LDD-150/24 6M 45W - LDD - 45/24 80W - LDD-IP80/24 100W - LDD-IP100/24 150W - LDD-150/24 150W - LDD-150/24 6.5M 45W - LDD - 45/24 80W - LDD-IP80/24 100W - LDD-IP100/24 150W - LDD-150/24 150W - LDD-150/24 7M 45W - LDD - 45/24 100W - LDD-IP100/24 100W - LDD-IP100/24 200W - LDD-IP200/24 200W - LDD-IP200/24 7.5M 45W - LDD - 45/24 100W - LDD-IP100/24 150W - LDD-150/24 200W - LDD-IP200/24 200W - LDD-IP200/24 8M 45W - LDD - 45/25 100W - LDD-IP100/24 150W - LDD-150/24 200W - LDD-IP200/24 200W - LDD-IP200/24 8.5M 60W - LDD-IP60/24 100W - LDD-IP100/24 150W - LDD-150/24 200W - LDD-IP200/24 200W - LDD-IP200/24 9M 60W - LDD-IP60/24 150W - LDD-IP150/24 150W - LDD-150/24 9.5M 60W - LDD-IP60/24 150W - LDD-IP150/24 150W - LDD-150/24 10M 10.5M 11M 11.5M 12M 12.5M 13M 13.5M 14M 14.5M 15M 60W - LDD-IP60/24 60W - LDD-IP60/24 60W - LDD-IP60/25 80W - LDD-IP80/24 80W - LDD-IP80/24 80W - LDD-IP80/24 80W - LDD-IP80/24 80W - LDD-IP80/24 80W - LDD-IP80/24 80W - LDD-IP80/25 80W - LDD-IP80/25 150W - LDD-IP150/24 150W - LDD-IP150/24 150W - LDD-IP150/24 150W - LDD-IP150/24 150W - LDD-IP150/24 150W - LDD-IP150/24 150W - LDD-IP150/24 150W - LDD-IP150/24 200W - LDD-IP200/24 200W - LDD-IP200/24 200W - LDD-IP200/24 150W - LDD-150/24 150W - LDD-150/24 200W - LDD-IP200/24 200W - LDD-IP200/24 200W - LDD-IP200/24 200W - LDD-IP200/24 200W - LDD-IP200/24 200W - LDD-IP200/24 200W - LDD-IP200/24 200W - LDD-IP200/24 200W - LDD-IP200/24 *Missing values in this chart are due to Driver minimum load parameters. 20w 80w Dimmable Drivers must be load-ed by a minimum 70% to achieve smooth dimming. However 100w 200w references use PWM dimming and do not require a minimum load, please use these references in the blank value scenarios. STANDARD LED DRIVERS /57

20w Mains Dimmable TRIAC LED Driver DC Voltage 24v Voltage Tolerance ±0.5V Rated Current 0.83A Voltage Range 180~250VAC 30mm 45mm Power Factor (Typ) PF 0.9 AC Current (Typ) 0.13A Inrush Current 0.7A 105mm 140mm Short Circuit Recovers automatically after fault condition is removed Working Temp -25~+50 C Safety Standards EMC Immunity EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) Weight: 0.19kg 20mm 27mm ORDER CODE WATTAGE DIMMING PATTERN INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LDD-20/24 20 watts PFM Dimming 180-265vAC 24vDC IP20 Note: Please ensure to add a minimum 70% (14w) load to this unit to achieve optimum dimming of 5% - 100%. 45w Mains Dimmable TRIAC LED Driver DC Voltage 24v Voltage Tolerance ±0.5V Rated Current 1.87A Voltage Range 180~250VAC 30mm 60mm Power Factor (Typ) PF 0.9 DIMABLE LED DRIVERS AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 0.27A 2.5A Recovers automatically after fault condition is removed -25~+50 C EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) 105mm 180mm Weight: 0.50kg 20mm 35mm /58 ORDER CODE WATTAGE DIMMING PATTERN INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LDD-45/24 45 watts PFM Dimming 180-250vAC 24vDC IP20 Note: Please ensure to add a minimum 70% (31.50w) load to this unit to achieve optimum dimming of 5% - 100%

60w Mains Dimmable TRIAC LED Driver DC Voltage 24v Voltage Tolerance ±0.5V Rated Current 2.5A Voltage Range 180~250VAC 30mm 70mm Power Factor (Typ) PF 0.95 AC Current (Typ) 0.45A Inrush Current 3.5A 105mm 200mm Short Circuit Recovers automatically after fault condition is removed Working Temp -25~+50 C Safety Standards EMC Immunity EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) Weight: 1.10Kg 20mm 46mm ORDER CODE WATTAGE DIMMING PATTERN INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LDD-IP60/24 60 watts PFM Dimming 180-250vAC 24vDC IP66 Note: Please ensure to add a minimum 70% (42w) load to this unit to achieve optimum dimming of 5% - 100% 80w Mains Dimmable TRIAC LED Driver DC Voltage 24v Voltage Tolerance ±0.5V Rated Current 3.33A Voltage Range 180~250VAC 30mm 70mm Power Factor (Typ) PF 0.95 AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 0.45A 3.5A Recovers automatically after fault condition is removed -25~+50 C EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) 105mm 200mm Weight: 1.10kg 20mm 46mm DIMABLE LED DRIVERS ORDER CODE WATTAGE DIMMING PATTERN INPUT VOLTAGE OUTPUT VOLTAGE IP RATING /59 LDD-IP80/24 80 watts PFM Dimming 180-250vAC 24vDC IP66 Note: Please ensure to add a minimum 70% (56w) load to this unit to achieve optimum dimming of 5% - 100%

100w Mains Dimmable TRIAC LED Driver DC Voltage 24v Voltage Tolerance ±0.5V Rated Current 4.16A Voltage Range 180~240VAC 30mm 70mm Power Factor (Typ) PF 0.6 AC Current (Typ) 0.88A Inrush Current 40A 105mm 230mm Short Circuit Recovers automatically after fault condition is removed Working Temp -40~+60 C Safety Standards EMC Immunity EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) Weight: 1.30kg 20mm 46mm ORDER CODE WATTAGE DIMMING PATTERN INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LDD-IP100/24 100 watts PWM Dimming 180-240vAC 24vDC IP66 150w Mains Dimmable TRIAC LED Driver DC Voltage 24v Voltage Tolerance ±0.5V Rated Current 6.25A Voltage Range 180~240VAC 30mm 77.5mm Power Factor (Typ) PF 0.65 DIMABLE LED DRIVERS AC Current (Typ) Inrush Current Short Circuit Working Temp Safety Standards EMC Immunity 1.32A 45A Recovers automatically after fault condition is removed -25~+50 C EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) 226.5mm 105mm Weight: 1.80kg 20mm 47mm /60 ORDER CODE WATTAGE DIMMING PATTERN INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LDD-IP150/24 150 watts PWM Dimming 180-240vAC 24vDC IP66

200w Mains Dimmable TRIAC LED Driver DC Voltage 24v Voltage Tolerance ±0.5V Rated Current 8.33A Voltage Range 180~240VAC 30mm 77.5mm Power Factor (Typ) PF 0.6 AC Current (Typ) 1.76A Inrush Current 50A 226.5mm 105mm Short Circuit Recovers automatically after fault condition is removed Working Temp -25~+50 C Safety Standards EMC Immunity EN61347-1, EN61347-2-13 EN61000-4-2,3,4,5,6,11 (Surge 4KV) Weight: 1.80kg 20mm 47mm ORDER CODE WATTAGE DIMMING PATTERN INPUT VOLTAGE OUTPUT VOLTAGE IP RATING LDD-IP200/24 200 watts PWM Dimming 180-240vAC 24vDC IP66 DIMABLE LED DRIVERS /61

Control Gear we offer a comprehensive range of Zone controllers, allowing LED Strip integration into almost any space. Features - Each controller is made to accommodate a LED Strip type - Single Colour/ Tunable White/ RGB or RGB/W. - Depending on the amount of LED Strip runs you wish to control independently will determine the amount of zones your controller will require. Each zone should be considered as an individual controllable area; you may choose to have 1 or a number of LED Strip runs per zone, however they will be controlled in unison. - Teucer controllers offer a variety of connectivity options, Via RF, DMX and WI-FI. CONTROLLER PROTOCOL 1 ZONE 2 ZONE 4 ZONE 6 ZONE 8 ZONE RF Single Colour Single Colour Tunable White Tunable White RGBW WP-2T WP-4TW LR-6TW LR-8RGBW LR-W WP-2W LR-2W Tunable White RGB RGBW LR-TW LR-2RGB WP-4RGBW RGB LR-RGB WP-1RGB LR-1RGB RGBW LR-RGBW DMX RGBW WP-DMX RGBW WP-4RGBW RGBW WP-DMX MASTER WIFI Single Colour Tunable White Tunable White RGBW WP-2T WP-4TW LR-6TW /62 RGBW WP-4RGBW EASY LIGHTING LR-8RGBW Tunable White WP-DMX MASTER EASY LIGHTING

The EasyLighting App is our most comprehensive con-troller to date. Set up to 8 zones in a variety of modes to suit your desired LED Strip, including: Single Colour Dimming/ Tunable White/ RGB and RGBW. Smart Phone & Tablet App EASY LIGHTING Note: The EasyLighting App is available for free to download on either APP or PLAY Stores. - Up to 8 Zones may be controlled either independently or in unison. - Using our colour-mix feature, each RGB LED Strip can be set to an exact colour Hex. - Assign and save functions and preferences to each Zone. - A Wireless Range of 8-15 meters between receiver and WI-FI transmitter (Dependent on signal obstacles within the installation area). - Each zone may have an image and description linked to it. - Sync your music collection to your lighting with access to your devices music player (e.g. Itunes), or sync to surrounding sound via your devices microphone. Features To install our Easy lighting system you will require one WI-FI Transmitter and a number of receivers, which will be dependent on the number of zones that you wish to control. Please also find below a list of WI-FI compatible, wall mounted and hand held controllers, which can integrate and sync with your WI- FI lighting system, allowing you the option of making adjustments from a number of devices. WI-FI TRANSMITTER WP-2T Single Colour, 2 zone Dimmer WP-4TW - Tunable White 4 zone Controller RF RECEIVER LR-6TW Tunable White 6 zone Controller WP-4RGBW RGBW 4 Zone Controller LR-8RGBW RGBW 6 zone Controller WP-DMX MASTER RGBW 8 zone Controller This DMX unit is equipped with its own in built WI-FI Transmitter PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS WI-FI TRANSMITTER LR-WIFI/TRANS 5-24vDC 0.3A 2x(72w-144w) 115x115x50mm IOS & Android RF RECEIVER LRR-WTC 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage /63 POWER REPEATER PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage

SINGLE COLOUR CONTROLLERS Single Zone DIM CONTROLLER DESCRIPTION Our Single Zone RF Controller allows users to dim Single Colour LED Strip; featuring 3 preset lighting level options and a dimming capacity of 5% - 100%. FEATURES - A Smooth Dimming range of 5% - 100% - 3 preset dimming modes. - Wireless RF range of 8-15m between controller and product receivers (dependent on signal obstacles within the installation area). SINGLE COLOUR CONTROLLERS REMOTE PART NO INPUT VOLTAGE LR-W 3.6vDC Note: Unit comes with 1 receiver as standard. SIGNAL RF DIMENSIONS 114x55x13mm 2 x AAA Batteries RECEIVER /64 PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS LRR-W 12-24vDC 2 x 6A 2x(72w-144w) 85x45x22mm Constant Voltage

Single Zone ROTARY WALL & TABLE DIMMERS DESCRIPTION Our robust RF Wall and Table Dimmers allow users to dim to a low 5% capacity with 256 levels of logarithmic dimming. Each unit is powered by a replaceable 3v battery, taking away the need for a power feed. This provides users with a greater degree of flexibility during installation. Note: Sync function, can adjust brightness levels from both WP-2W (wall panel) and LR-2W (Remote) simultaneously FEATURES - A Smooth Dimming range of 5% - 100%. - Designed to fit into your existing switch back box. - Wireless RF range of 8-15m between dimmers and product receivers (dependent on signal obstacles within the installation area). - Expand each zone receiver with a power repeater, for longer LED Strip runs. CONTROLLERS PART NO INPUT VOLTAGE SIGNAL DIMENSIONS Wall Panel - WP-2W 3.6vDC Table Top unit - LR-2W 3.6vDC RECEIVER PART NO INPUT VOLTAGE LRR-2W 12-36vDC CURRENT 4 x 5A RF RF 86x86x19mm 86x86x19mm OUTPUT DIMENSIONS 4x(60w-180w) 170x46x49mm 3v CR-2032 Battery 3v CR-2032 Battery Constant Voltage SINGLE COLOUR CONTROLLERS POWER REPEATER PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS /65 PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x49mm Constant Voltage

2 Zone TOUCH PANEL WALL DIMMER DESCRIPTION Our 2 zone Touch Panel Wall Dimmer offers users RF wireless control of up to 2 zones of Single Colour LED Strip. Featuring a backlit screen, 5-100% dimming capacity, and the option of WI-FI connectivity when paired with our WI-FI transmitter, thus allowing for simultaneous control via smart phone/ tablet devices. FEATURES - 2 Zone Dimmer with Touch-sensitive glass. - Control up to two zones in Single Colour. - A Smooth dimming range of 5% - 100%. - Designed to fit into your existing switch back box. - This unit may be installed solely via RF or combined with our our WIFI Transmitter for smart phone/ tablet compatibility. - A Wireless RF range of 8-15m between wall unit and product receivers (dependent on signal obstacles within the installation area). - Expand each zone receiver with a Power Repeater, for longer LED Strip runs. CONTROLLER PART NO INPUT VOLTAGE SIGNAL DIMENSIONS WP-2T 12-24vDC RF 86x86x29mm 3v CR-2032 Battery CONTROLLER POWER SUPPLY PART NO RATED POWER OUTPUT DIMENSIONS SINGLE COLOUR CONTROLLERS LD-IP10/24 PART NO RECEIVER LRR-WTC 10 watt INPUT VOLTAGE 12-36vDC 24v CURRENT 4 x 5A 30x105x20mm OUTPUT DIMENSIONS 4x(60w-180w) 170x46x19mm PSU Constant Voltage WIFI TRANSMITTER /66 LR-WIFI/TRANS 5-24vDC 0.3A N/A 115x115x50mm WIFI Transmitter POWER REPEATER PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage

TUNABLE WHITE CONTROLLERS Single Zone TUNABLE WHITE CONTROLLER DESCRIPTION Our 1 zone Tunable White RF Controller allows users to adjust their LED Strip colour temperature from warm to cool (e.g.2500k 6000k). The scope will depend on the temperature range offered by your Tunable White LED Strip. FEATURES - A Smooth dimming range of 5% - 100%. - 3 preset dimming modes. - A wireless RF range of 8-15m between controller and product receivers (dependent on signal obstacles within the installation area). REMOTE PART NO INPUT VOLTAGE LR-TW 3.6vDC Note: Unit comes with 1 receiver as standard. SIGNAL RF DIMENSIONS 114x55x13mm 2 x AAA Batteries TUNABLE WHITE CONTROLLERS RECEIVER PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS /67 LRR-TW 12-24vDC 3 x 6A 2x(72w-144w) 85x45x22mm Constant Voltage

4 Zone TUNABLE WHITE TOUCH PANEL CONTROLLER DESCRIPTION Our Teucer 4 zone Tunable White Touch Panel allows users to control up to 4 zones of Tunable White LED Strip. This unit features Dim and Scene-saving modes and the option of WI-FI Connectivity when paired with our WI-FI Transmitter, thus allowing for simultaneous control via smart phone/ tablet devices. FEATURES - Control up to 4 zones in Tunable White independently or in unison. - A Smooth Dimming range of 5% - 100%. - Designed to fit into your existing switch back box. - A Master and Slave receiver function ensures that all zones remain in sync. - This unit may be installed solely via RF or combined with our WI-FI Transmitter for smart phone/ tablet compatibility. - Wireless RF range of 8-15m between wall unit and product receivers (dependent on signal obstacles within the installation area). - Expand each zone receiver with a power repeater, for longer LED Strip runs. CONTROLLER PART NO INPUT VOLTAGE SIGNAL DIMENSIONS WP-4TW 3vDC RF 86x86x29mm Touch Sensitive CONTROLLER POWER SUPPLY PART NO RATED POWER OUTPUT DIMENSIONS TUNABLE WHITE CONTROLLERS LD-IP10/24 PART NO RECEIVER LRR-WTC 10 watt INPUT VOLTAGE 12-36vDC CURRENT 4 x 5A 24v 30x105x20 OUTPUT DIMENSIONS 4x(60w-180w) 170x46x19mm WP-4TW PSU Constant Voltage WI-FI TRANSMITTER /68 LR-WIFI/TRANS 5-24vDC 0.6A N/A 115x115x50mm WIFI Transmitter POWER REPEATER PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage

6 Zone TUNABLE WHITE CONTROLLER DESCRIPTION Our 6 zone Tunable White controller allows users to control up to 6 zones of Tunable White LED Strip. This unit features Dim and Scene-saving modes, with the option of WI-FI Connectivity when paired with our WI-FI transmitter, allowing for simultaneous control via smart phone/ tablet devices. FEATURES - Control up to 6 zones in Tunable White independently or in unison. - A Smooth-Dimming range of 5% - 100%. - Quick-Dimming control functions with 25% - 50% - 75% - 100% different light level settings. - A Master and Slave receiver function ensures that all zones remain in sync. - This unit may be installed solely via RF or combined with our our WI-FI Transmitter for smart phone/ tablet compatibility. - A Wireless RF range of 10m 20m between controller and product receivers (dependent on signal obstacles within the installation area). - Expand each zone receiver with a Power Repeater, for longer LED Strip runs. CONTROLLER PART NO INPUT VOLTAGE SIGNAL DIMENSIONS LR-6TW PART NO RECEIVER LRR-WTC 3.6vDC INPUT VOLTAGE 12-36vDC CURRENT 4 x 5A RF 139x47x17mm OUTPUT DIMENSIONS 4x(60w-180w) 170x46x19mm 3 x AAA batteries Constant Voltage TUNABLE WHITE CONTROLLERS WIFI TRANSMITTER LR-WIFI/TRANS 5-24vDC 0.6A N/A 115x115x50mm WIFI Transmitter /69 POWER REPEATER PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19 Constant Voltage

RGB CONTROLLERS Single Zone RGB CONTROLLER DESCRIPTION Our 1 zone RF RGB controller allows users to scroll through RGB strip via a Touch Colour Wheel. This unit features 20 play modes and a dimming capacity of 5% - 100%. FEATURES - 1 zone RGB control. - 20 play modes and a smooth dimming range of 5% - 100%. - A wireless RF range of 8-15m between controller and product receivers (dependent on signal obstacles within the installation area). RGB COLOUR CONTROLLERS REMOTE PART NO INPUT VOLTAGE LR-RGB 3.6vDC Note: Unit comes with 1 receiver as standard. SIGNAL RF DIMENSIONS 110x52x20mm 2 x AAA Batteries RECEIVER /70 PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS LRR-RGB 12-24vDC 3 x 6A 3x(72w-144w) 85x45x25mm Constant Voltage

Single Zone ROTARY RGB WALL & TABLE CONTROLLERS DESCRIPTION Our robust RF Wall and Table controllers allow users to scroll through RGB and dim to a low 5% capacity with 256 levels of logarithmic dimming. Each unit is powered by a replaceable 3v battery taking away the need for a power feed. This provides users with a greater degree of flexibility during installation. Note: Sync function, can adjust brightness levels from both WP-1RGB (wall panel) and LR-1RGB (Remote) simultaneously. FEATURES - RGB Control and a Smooth Dimming range of 5% - 100% - Designed to fit into your existing switch back box. - Wireless RF range of 8-15m between controller and product receivers (dependent on signal obstacles within the installation area). - Expand each zone receiver with a power repeater, for longer LED Strip runs. CONTROLLERS PART NO INPUT VOLTAGE SIGNAL DIMENSIONS Wall Panel - WP-1RGB 3vDC Table Top unit - LR-1RGB 3vDC RECEIVER PART NO INPUT VOLTAGE LRR-1RGB 12-36vDC CURRENT 3 x 5A RF RF 86x86x29mm 86x86x29mm OUTPUT DIMENSIONS 3x(60w-180w) 170x46x19mm 3v CR-2032 Battery 3v CR-2032 Battery Constant Voltage TUNABLE WHITE CONTROLLERS POWER REPEATER PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS /71 PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage

2 Zone RGB CONTROLLER DESCRIPTION Our 2 Zone RGB Controller allows up to 2 RGB zones to be controlled independently or in Unison. This unit features a touch colour wheel, Play mode and an internal rechargeable battery. FEATURES - RGB Control with play mode. - A Smooth Dimming range of 5% - 100%. - A Master and Slave receiver function ensures colour changing modes remain in sync within all zones. - USB Rechargeable battery. - Wireless RF range of 8-15m between controller and product receivers (dependent on signal obstacles within the installation area). - Expand each zone receiver with a Power Repeater, for longer LED Strip runs. CONTROLLERS PART NO INPUT VOLTAGE SIGNAL DIMENSIONS LR-2RGB 3.6vDC RF 114x40x75mm Rechargeable RGB COLOUR CONTROLLERS RECEIVER PART NO LRR-2RGB INPUT VOLTAGE 12-36vDC CURRENT 3 x 5A OUTPUT 3x(60w-180w) DIMENSIONS 170x46x19mm Battery Constant Voltage /72 POWER REPEATER PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage

RGB/W CONTROLLERS Single Zone RGB/W CONTROLLER DESCRIPTION Our 1 Zone RGB/W is our entry level RGB/W controller. This unit features a Touch Colour Wheel and 20 pre-set play modes and effects. FEATURES - Control 1 Zone of RGB and White from the same remote. - Choose from 20 pre-set colour changing play modes. - A smooth dimming range from 5%-100%. - Wireless RF range of 8-15m between controller and product receivers (dependent on signal obstacles within the installation area). REMOTE PART NO INPUT VOLTAGE LR-RGBW 3.6vDC Note: Unit comes with 1 receiver as standard. SIGNAL RF DIMENSIONS 110x52x20mm 2 x AAA Batteries RGB/W COLOUR CONTROLLERS RECEIVER PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS /73 LRR-RGBW 12-24vDC 4 x 6A 2x(72w-144w) 85x45x25mm Constant Voltage

Single Zone RGB/W DMX CONTROLLER DESCRIPTION Our WP-DMX Touch Wall Panel offers users 1 Zone control of RGB + (W) or RGBW LED Strip. This unit Features an RGB scroll wheel, Single Colour Dimming, Scene Saving and Play Modes. FEATURES - Control 1 zone of RGB + white or RGBW LED Strip independently or in unison. - RGB Controller and dimmer with a 5% - 100% Dimming capacity. - Save lighting functions and preferences with Scene Save. - Designed to fit into your existing switch back box. - Expand each zone receiver with a Power Repeater, for longer LED Strip runs. - You will require a DMX Amplifier when using over 55 meters of DMX signal wire. CONTROLLER PART NO INPUT VOLTAGE SIGNAL DIMENSIONS WP-DMX 12-24DC DMX 512 86x86x29mm Touch Sensitive Panel CONTROLLER POWER SUPPLY PART NO RATED POWER OUTPUT DIMENSIONS RGB/W COLOUR CONTROLLERS LD-IP10/24 PART NO RECEIVER DIM-DMX1CH 10 watt INPUT VOLTAGE 12-36vDC CURRENT 4 x 5A 24v 30x105x20mm OUTPUT DIMENSIONS 4x(60w-180w) 170x40x19mm LED Driver DMX Signal POWER REPEATER /74 PR-RGB 12-36vDC 4 x 5A 4x(60w- 180w) 170x46x19mm Constant Voltage DMX AMPLIFIER DIM-DMX/AMP 12-24vDC 0.5A MAX DMX512 46x145x16mm Signal Booster

4 Zone RGB/W TOUCH PANEL CONTROLLER DESCRIPTION Our Wireless 4 Zone RGB/W Touch Panel provides users with control of up to 4 zones of RGB + (W) or RGBW LED Strip. This unit has the option of being installed solely via DMX or RF. For smart phone/ tablet connectivity please pair our RF receivers with a WI-FI transmitter. FEATURES - Control up to 4 zones of RGB + (W) or RGBW LED Strip independently or in unison. - RGB controller and dimmer with a 5% 100% Dimming capacity. - Assign and save light functions and preferences to each Zone. - Designed to fit into your existing switch back box. - Install this unit through DMX, RF or via our WI-FI Transmitter for smart phone/ tablet connectivity. - In RF & WI-FI mode; wireless range of 8-15 meters between wall unit and product receiver (dependent on signal obstacles within the installation area). - Expand each zone receiver with a Power Repeater, for longer LED Strip runs. - You will require a DMX Amplifier when using over 55 meters of DMX signal wire. CONTROLLER PART NO INPUT VOLTAGE SIGNAL DIMENSIONS WP-4RGBW 3vDC RF/WIFI or DMX 86x86x29mm Touch Sensitive CONTROLLER POWER SUPPLY PART NO RATED POWER OUTPUT DIMENSIONS LD-IP10/24 10 watt 24v 30x105x20mm LED Driver PART NO DMX RECEIVER DIM-DMX1CH RF RECEIVER LRR-WTC INPUT VOLTAGE 12-36vDC 12-36vDC CURRENT 4 x 5A 4 x 5A OUTPUT 4x(60w-180w) 4x(60w-180w) DIMENSIONS 170x46x19mm 170x46x19mm DMX 512 RF SIGNAL RGB/W COLOUR CONTROLLERS WIFI TRANSMITTER LR-WIFI/TRANS 5v 24vDC 0.3A N/A 115x115x50mm WI-FI Transmitter /75 POWER REPEATER PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage

8 Zone RGB/W TOUCH PANEL CONTROLLER DESCRIPTION Our 8 Zone RGB/W Controller allows users to control up to 8 Zones of RGB + (W) or RGBW LED Strip from one hand held unit. Featuring 10 pre-set play modes with save functions, and the option of WI-FI Connectivity when paired with our WI-FI Transmitter; allowing for simultaneous control via smart phone/ tablet devices. FEATURES - Control up to 8 zones of RGB + (W) or RGBW LED Strip independently or in unison. - A master and slave receiver function ensures colour changing modes remain in sync within all Zones. - Wireless RGB Controller and Dimmer with a 5% 100% Dimming capacity. - Assign and save Light functions and preferences to each Zone. - Wireless RF Range of 8-15m between controller and product receiver (dependent on signal obstacles within the installation area). - Install this unit through solely RF or combine with a WIFI Transmitter for smart phone/ tablet compatibility. - Expand each Zone Receiver with a Power Repeater for longer LED Strip runs. CONTROLLER PART NO INPUT VOLTAGE SIGNAL DIMENSIONS LR-8RGBW 3vDC RF 43x131x24mm 3 x AAA Batteries CONTROLLER POWER SUPPLY PART NO RATED POWER OUTPUT DIMENSIONS RGB/W COLOUR CONTROLLERS LD-IP10/24 PART NO RECEIVER LRR-WTC 10 watt INPUT VOLTAGE 12-36vDC CURRENT 4 x 5A 24v 30x105x20mm OUTPUT DIMENSIONS 4x(60w-180w) 170x46x19mm LED Driver RF Signal WI-FI TRANSMITTER /76 LR-WIFI/TRANS 5v 24vDC 0.3A N/A 115x115x50mm WI-FI Transmitter POWER REPEATER PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage

8 Zone RGB/W MASTER DESCRIPTION The RGB/W Master Wall panel allows users to control up to 8 different zones of RGB + (W) or RGBW LED Strip. Suitable for large scale DMX lighting installations; users can scroll through RGB via its touch sensitive scroll wheel, dim Single Colour and save a variety of pre-set lighting modes and effects per Zone. Note: This product comes as standard with a built-in WI-FI Transmitter to sync in via smart phone/ tablet devices. FEATURES - Control up to 8 zones of RGB + (W) or RGBW LED Strip independently or in unison. - Smooth dimming from 5%-100%. - Assign and save light functions & preferences to each Zone. - Recommended for all commercial RGB installations. - Expand each Zone Receiver with a Power Repeater, for longer LED Strip runs. - You will require a DMX amplifier when using over 55 meters of DMX signal wire. CONTROLLER PART NO INPUT VOLTAGE SIGNAL DIMENSIONS WP-DMXMASTER 12/24vDC DMX 512/ WIFI 75x165x38mm Touch Sensitive CONTROLLER POWER SUPPLY PART NO RATED POWER OUTPUT DIMENSIONS LD-IP10/24 10 watt PART NO INPUT VOLTAGE RECEIVER DIM-DMX1CH 12-36vDC POWER REPEATER CURRENT 4 x 5A 24v OUTPUT 4x(60w-180w) 30x105x20mm DIMENSIONS 170x46x19mm LED Driver DMX 512 Signal RGB/W COLOUR CONTROLLERS PR-RGB 12-36vDC 4 x 5A 4x(60w-180w) 170x46x19mm Constant Voltage /77 DMX AMPLIFIER DIM-DMX/AMP 12-24vDC 0.5A MAX DMX512 46x145x16 Signal Booster

CONTROLLER ACCESSORIES POWER REPEATER DESCRIPTION power repeaters enable users to expand single co-lour, Tunable White, RGB and RGB/ W LED Strip runs without the need of acquiring additional Receivers. 45.5mm 170.4mm FEATURES CONTROLLER ACCESSORIES - Expand Single colour, Tunable White, RGB and RGB/W LED Strip. - PWM Signal/ Dimming. - Almost unlimited Signal expansion. PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS PR-RGB 12-36vDC 4 x 5A 4x(60-180)w 170x46x19mm Constant Voltage 18.6mm /78

DMX 512 RECEIVER DESCRIPTION Our DMX Receiver is compatible with most DMX protocols and comes equipped with a digital display allowing you to set manual and automatic signal addresses. FEATURES 46mm - Compatible with most DMX 512 interfaces. - Suitable for Single colour, Tunable White, RGB & RGB/W LED lighting. - Digital Numeric Display with DMX Address settings. - Up to 4 output channels. 170mm 19mm PART NO INPUT VOLTAGE CURRENT OUTPUT DIMENSIONS DIM-DMX1CH 12-36vDC 4 x 5A 4x(60-180)w 170x46x19mm DMX 512 Signal DIM-DMX/AMP RECEIVER DESCRIPTION Our DMX Signal Amplifier is a compact unit used to boost DMX signal on large scale installations. Compatible with most DMX protocols, Teucer recommends using a DIM-DMX/AMP for every 55 meters of signal wire. 46mm 145mm FEATURES - DMX signal input / output. - Expand and boost DMX signal. - Compatible with TEUCER DMX decoders. DMX AMPLIFIER PART NO INPUT VOLTAGE CURRENT OUTPUT SIGNAL 16mm CONTROLLER ACCESSORIES DIM-DMX/AMP 12v 24vDC 0.5A MAX 4x(60-180)w DMX 512 Signal Booster DMX AMP POWER SUPPLY /79 PART NO RATED POWER OUTPUT DIMENSIONS LD-IP20/24 20 watt 24v 30x162x20mm LED Driver

LED STRIP COMPATIBILITY GUIDE INPUT POWER +/- 220-250v Switch LED Strip On/Off LED DRIVER LED strip Control LED Strip via Main Dimmer MAINS DIMMER MAINS DIM DRIVER LED strip Control LED Strip via Mains Lighting System DIMMING SYSTEM MAINS DIM DRIVER LED strip 1/10V DIMMER Control LED Strip via 1-10v Dimmer LED DRIVER 1/10V DECODER LED strip LED STRIP COMPATIBILITY GUIDE Control LED Strip via 1-10v Lighting System Control LED Strip via Dali Lighting System DIMMING SYSTEM DIMMING SYSTEM 1/10V SIGNAL LED DRIVER 1/10V DECODER 1/10V SIGNAL LED DRIVER DALI DECODER LED strip LED strip /80 DALI SIGNAL

LED DRIVER Single Colour Dimming Controllers Controller Receivers RF Protocol LR-W LR-2W WP-2W WP-2T WP-4TW LR-RGB LR-1RGB WP-1RGB LR-2RGB LR-8RGBW WP-4DMX LR-W WP-2W LR-2W WP-2T Tunable White Controllers LR-TW WP-4TW LR-6TW RGB Controllers LR-RGB LR-1RGB WP-1RGB LR-2RGB DMX Protocol WP-DMX WP-DMX MASTER WP-4RGBW WIFI Compatible WP-DMX MASTER WP-2T WP-4TW LR-6TW LR-8RGBW WIFI Transmitter RGBW Controllers LR-8RGBW WP-DMX WP-4RGBW WP-DMX MASTER WP-2T IOS/Android app Lighting System & Compatible Units LED STRIP COMPATIBILITY GUIDE Easy Lighting App LR-6TW LR-8RGBW WP-4TW WP-4RGBW WP-DMX MASTER /81

GLOSSARY Beam Angle/Spread Colour rendering Colour temperature Colour changing DALI Diffuser IP code LED Power factor RGB Part Codes Explained Is the angle between the two directions opposed to each other over the beam axis for which the luminous intensity is half that of the maximum luminous intensity. The ability of a given light source to render colours naturally, to reveal the colors of various objects faithfully in comparison with an ideal or natural light source. The colour rendering index (CRI) ranges from 0 to 100. The temperature at which a black body would emit radiation of the same colour as a given object. The ability to change the colour temperature of a lighting installation to create dynamic lighting effects or enhanced comfort levels. Digital Addressable Lighting Interface, a standardised communication interface to regulate lighting levels and to switch electronic HFD ballasts on and off. Optical cover used to mix light rays to reduce glare or improve uniformity. An opal cover is an example of a diffuser. (International Protection Marking, also referred to as ingress protection) are defined in international standard EN 60529. They are used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. It is published by the International Electrotechnical Commission (IEC) (Light Emitting Diode used as a light source). An electronic semiconductor device that emits light when an electric current passes through it converting electrical energy directly into light. The ratio of the actual electrical power dissipated by an AC circuit to the product of the r.m.s. (root mean square) values of current and voltage. The difference between the two is caused by reactance in the circuit and represents power that does no useful work Red, green and blue, used to specify the colours of a light source. Each Teucer product incorporates a specific code related to the item classification. This can be explained as follows: for example the LS-1IPWW27K Other Abbreviations LED Driver Abbreviation: LD-IP100/24 L LED CW Cool White LD LED Driver S- Strip DL Daylight IP IP Code GLOSSARY 1 IP WW 27K 4.8W IP (Code) Warm White 2700 Kelvin B RGB LS-2 LS-3 Blue Red Green Blue 7.2W Strip 9.6W Strip 100 24 Wattage Voltage /82 LS-4 LS-4RGB 12W Strip 14.4W Strip LS-4RGBW 17.3W Strip LS-5 19.2W Strip

IP Code Table 0 Non-protected Not protected 0 Non-protected Not protected against moisture 1 Hand-protected Protected against solid objects exceeding 50mm in diameter. 1 Drip-proof against vertical water drops Water drips falling vertically shall have no harmful effect. Protected against finger contact 2 Finger- protected with live parts; and against solid objects exceeding 12mm in 2 Drip-proof when tilted at angles of up to 15 Water drips shall have no harmful effect. diameter. 3 Tool-protected Protected against contact with live parts by tools, wire or sim- 3 Rain/spray-proof Water falling at an angle of up to 60 shall have no ilar objects over 2.5mm thick; harmful effect. and protection against penetration of solid objects exceeding 2.5mm in diameter. 4 Wire-protected Protected against contact with live parts by tools, wire or simi- 4 Splash-proof Splashing water from any direction shall have no harmful lar objects over 1mm thick; pro- effect. tection against penetration of solid objects exceeding 1mm in diameter. 5 Dust accumulation protected Complete protection against contact with live parts and 5 Jet-proof Water projected by a nozzle from any direction shall against harmful accumulation have no harmful effect (Noz- of dust; some dust may pene- zle diameter 6.3mm, pres- trate but not to the extent that sure 30kPa). operation is impaired. 6 Dust penetration protected Complete protection against contact with live parts and 6 Jet-proof Water projected by a nozzle from any direction shall against penetration of dust. have no harmful effect (Nozzle diameter 12.5mm, pressure 100kPa). 7 Watertight Watertight; temporary immersion in water under specified conditions of pressure and time possible without ingress of water in harmful quantities. GLOSSARY 8 Pressure watertight Pressure watertight; continuous submersion in water under specified conditions /83 of pressure and time without ingress of water in harmful quantities.

/84