DESCRIPTION Less than 100 mm in height, the TTS-SA LED downlight is suitable for most applications. Powered by Philips SLM LED engine, it is fitted with a satin etched medium beam reflector and features a wide range of decorative accessories as well as an IP65 bezel option. It is also compatible with the PI200 Plaster-in kit for a seamless finish. Available in a range of lumen outputs and colour temperatures, the TTS-SA offers a choice of control, dimming and emergency conversion options. SPECIFICATIONS Nominal weight Mains voltage 0.5 kg 220-240 V 99 mm 25 mm max Mains frequency Ingress protection (front) 50-60 Hz IP20 Ingress protection (rear) IP20 ø110 mm cut-out ø130 mm bezel Mains lead Dimming lead Operating ambient temperature Colour consistency - MacAdam Ellipse Warranty 500 mm LSF 500 mm 2 core LSF -25 C to +35 C 3 SDCM 5 years Power factor >0.9 Colour rendering R a 80 Beam angle 46 PERFORMANCE DATA Colour Temp (K) Luminaire Output (Llm) Luminaire Power (W) Luminaire Efficacy (Llm/W) UGR Model Ref 3000 598 7.0 85.4 15.9 TTS-SA001 3000 1124 11.5 97.6 18.1 TTS-SA003 3000 1751 18.3 95.5 19.6 TTS-SA005 3000 2335 26.5 88.1 20.6 TTS-SA007 4000 623 7.0 89.1 16.0 TTS-SA002 4000 1172 11.5 101.8 18.2 TTS-SA004 4000 1826 18.3 99.6 19.8 TTS-SA006 4000 2436 26.5 91.9 20.8 TTS-SA008 Full RELUX photometric data and BIM files available to download from the relevant product page on the Gamma Illumination website illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-302-REV3 18/09/2018 1 of 6
LIFE Model Ref 25 C Ambient Temperature L90 / B10 L80 / B10 L70 / B10 TTS-SA001 >50,000 h >50,000 h >50,000 h TTS-SA002 >50,000 h >50,000 h >50,000 h TTS-SA003 41,000 h >50,000 h >50,000 h TTS-SA004 41,000 h >50,000 h >50,000 h TTS-SA005 38,000 h >50,000 h >50,000 h TTS-SA006 38,000 h >50,000 h >50,000 h TTS-SA007 26,000 h >50,000 h >50,000 h TTS-SA008 26,000 h >50,000 h >50,000 h L VALUE = % of initial lumens maintained after specified time B VALUE = % of fittings that will have depreciated below the L value after specified time EXAMPLE - 50,000 hours L70 / B50 L70 = 70% of initial lumens maintained after 50,000 hours B50 = 50% of fittings will have depreciated below 70% of the initial lumens after 50,000 hours OR 50% of fittings will have maintained 70% of the initial lumens after 50,000 hours RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-302-REV3 18/09/2018 2 of 6
OPTIONS Touch Dimming SELF TEST SELF TEST T+DALI Touch dimming / DALI /EM EM conversion /EMD DALI / Self test emergency conversion with remote indicator /EMI Integral indicator for EM conversion /EMDI DALI / Self test emergency conversion with integral indicator /SPC Single Point Connection to an ILEM product BEZELS TA200/WH White bezel - RAL9010 TA200/CH Chrome bezel TA200/BA Brushed aluminium bezel TA200/BL Black bezel - RAL9005 Product variations Other colours and specifications available on request RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-302-REV3 18/09/2018 3 of 6
ANTI-TAMPER BEZELS AT200/WH White anti-tamper bezel AT200/CH Chrome anti-tamper bezel AT200/BA Brushed aluminium anti-tamper bezel AT200/BL Black anti-tamper bezel Product variations Other colours and specifications available on request GF208 / GF218 Anti-tamper driver / Anti-tamper bit DECORATIVE BEZELS AVAILABLE IN WHITE /WH CHROME /CH BRUSHED ALUMINIUM /BA OR BLACK /BL TA225/WH Decorative bezel in white complete with clear halo TA226/WH Decorative bezel in white complete with opal halo IP65 BEZEL IP65/001/130 IP65 clear polycarbonate RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-302-REV3 18/09/2018 4 of 6
FIXING OPTIONS PI200 Plaster-in kit. Please see PI200 datasheet for details. TTS-SA TA200/WH PI200 Example of TTS-SA with white bezel and plaster-in kit HALOKIT.001 Halo kit - maximum cut-out 150 mm ACCESSORIES TA220/BLUE Blue hi-light TA220/FROST Frosted hi-light TA210/BLUE Blue vertical halo TA210/FROST Frosted vertical halo TA206 IP54 glass scatter dome TA240 IP54 clear glass TA241 IP54 centre etched glass TA242 IP54 fully etched glass TA208 Kick reflector PRODUCT VARIATIONS VARIATION Coloured bezel Specify any RAL colour Reflector finish Please speak to Sales Plug and socket systems To your specification Reduced outputs To your specification Product variations Other specifications available on request RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-302-REV3 18/09/2018 5 of 6
FURTHER INFORMATION 30 0 400 30 Declaration of Conformity Download at Photometric data Download at BIM files Download at Thornhill Road Business Park Tenter Fields, Dewsbury West Yorkshire WF12 9QT FS 593079 RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-302-REV3 18/09/2018 6 of 6