Aluminum Electrolytic Capacitors Axial High Temperature, High Ripple Current smaller 9 AHT-DIN 8 AHT lower dimensions higher ripple Fig. 25 C 38 AML QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 0 x 30 to 2 x 38 Rated capacitance range, C R 47 μf to 6800 μf Tolerance on C R ± 20 % Rated voltage range, U R 6 V to 00 V Category temperature range -40 C to +25 C Endurance test at 50 C 000 h Endurance test at 25 C 4000 h Useful life at 25 C 8000 h Useful life at 85 C,.4 x I R applied 40 000 h Shelf life at 0 V, 25 C 000 h (00 V: 500 h) Shelf life at 0 V, 50 C 63 V: 500 h Based on sectional specification IEC 60384-4 / EN 30300 Climatic category IEC 60068 40 / 25 / 56 FEATURES Extra long useful life: up to 8000 h at 25 C Extended temperature range: usable up to 50 C Low levels provide very high ripple current capability Miniaturized, high CV-product per unit volume Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical aluminum case, insulated with a blue sleeve Taped versions up to case Ø 5 mm x 30 mm available for automatic insertion Lead diameter Ø d =.0 mm, available on request AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 APPLICATIONS Automotive, industrial and telecommunication Smoothing, filtering, buffering Low mounting height applications, vibration and shock resistant SMPS and standard power supplies MARKING The capacitors are marked (where possible) with the following information: Rated capacitance (in μf) Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) Rated voltage (in V) Upper category temperature (25 C) Date code in accordance with IEC 60062 Code for factory of origin Name of manufacturer Negative terminal identification Series number (20) SELECTION CHART FOR C R, U R, AND RELEVANT NOMINAL CASE SIZE (Ø D x L in mm) C R (μf) U R (V) 6 25 40 63 00 47 - - - - 0 x 30 68 - - - - 2.5 x 30 00 - - - 0 x 30 2.5 x 30 50 - - - 2.5 x 30 5 x 30 220 - - 0 x 30 2.5 x 30 8 x 30 330 - - 2.5 x 30 5 x 30 8 x 38 470-0 x 30 2.5 x 30 8 x 30 2 x 38 680 0 x 30 2.5 x 30 5 x 30 8 x 38-000 2.5 x 30 2.5 x 30 8 x 30 2 x 38-500 2.5 x 30 5 x 30 8 x 38 - - 2200 5 x 30 8 x 30 2 x 38 - - 3300 8 x 30 8 x 38 - - - 4700 8 x 38 2 x 38 - - - 6800 2 x 38 - - - - Revision: 09-Jan-7 Document Number: 28336 For technical questions, contact: aluminumcaps@vishay.com
DIMENSIONS in millimeters AND AVAILABLE FORMS Ø D 73 ±.6 L Ø d I L 33 ± Ø d Ø D F Form BR: Taped on reel Case Ø D x L = 6.5 mm x 8 mm to 5 mm x 30 mm Fig. 2 - Form BR Form AA: Axial in box Case Ø D x L = 0 mm x 30 mm to 2 mm x 38 mm F Fig. 3 - Form AA Table AXIAL; DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES NOMINAL CASE SIZE Ø D x L (mm) AXIAL: FORM AA AND BR PACKAGING QUANTITIES MASS Ø d () I Ø D max. L max. F min. (g) FORM FORM AA BR 0 x 30 0.8 55 ± 0.5 30.5 35 4.8 340 500 2.5 x 30 0.8 55 ± 3.0 30.5 35 7.4 260 400 5 x 30 0.8 55 ± 5.5 30.5 35.7 200 250 8 x 30 0.8 55 ± 8.5 30.5 35 2.9 20-8 x 38 0.8 34 ± 8.5 39.5 44 9.0 25-2 x 38 0.8 34 ± 2.5 39.5 44 24.0 00 - Notes For detailed tape dimensions, please see www.vishay.com/doc?2836. () Lead diameter Ø d =.0 mm, available on request. D D3 20 C (3 x) - 90 ± 2 (3 x) 3.6 + 0.2-0.2 L.05 + - 0.03 (3 x) 0..3 + 0. (3 x) 0 d2 Mounting holes Case Ø D x L = 5 mm x 30 mm to 2 mm x 38 mm Especially for applications with severe shocks and vibrations.3 + 0 (3 x) - 0.05 Ø D2 Ø d +.0-0.5 Fig. 4 - Mounting hole diagram and outline; form MR: With mounting ring and pins Table 2 MOUNTING RING; DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES NOMINAL CASE SIZE Ø D x L CASE CODE MOUNTING RING: FORM MR MASS (g) PACKAGING QUANTITIES Ø d Ø d2 Ø D max. Ø D2 max. D3 L max. 5 x 30 02 0.8.0 + 0.4 5.5 7.5 6.5 ± 0.2 33 8.6 200 8 x 30 03 0.8.0 + 0.4 8.5 9.5 8.5 ± 0.2 33.5 240 8 x 38 04 0.8.0 + 0.4 8.5 9.5 8.5 ± 0.2 42 4.0 00 2 x 38 05 0.8.0 + 0.4 2.5 22.5 2.5 ± 0.2 42 9.2 00 Revision: 09-Jan-7 2 Document Number: 28336 For technical questions, contact: aluminumcaps@vishay.com
ELECTRICAL DATA SYMBOL DESCRIPTION C R Rated capacitance at 00 Hz, tolerance ± 20 % I R Rated RMS ripple current at 0 khz, 25 C I L Max. leakage current after min at U R I L5 Max. leakage current after 5 min at U R Equivalent series resistance at 00 Hz (calculated from tan max. and C R ) Z Max. impedance at 0 khz Note Unless otherwise specified, all electrical values in Table 3 apply at T amb = 20 C, P = 86 kpa to 06 kpa, RH = 45 % to 75 %. ORDERING EXAMPLE Electrolytic capacitor 20 series 000 μf / 6 V; ± 20 % Nominal case size: Ø 2.5 mm x 30 mm; form BR Ordering code: MAL2202502E3 Former 2NC: 2222 20 2502 Table 3 ELECTRICAL DATA AND ORDERING INFORMATION U R (V) 6 25 40 63 00 C R 00 Hz (μf) NOMINAL CASE SIZE Ø D x L (mm) I R 0 khz 25 C (ma) I L min (μa) I L5 5 min (μa) TYP. 00 Hz (m) MAX. 00 Hz (m) TYP. 0 khz (m) MAX. 0 khz (m) Z MAX. 0 khz (m) FREQ. CODE () Note () Determines the applicable row in the table Multiplier of Ripple Current (I R ) as a Function of Frequency ORDERING CODE MAL220... IN BOX FORM AA TAPED ON REEL FORM BR MOUNTING RING FORM MR 680 0 x 30 200 7 84 06 77 44 74 78 MF 568E3 2568E3-000 2.5 x 30 2550 232 04 77 28 35 58 6 MF 502E3 2502E3-500 2.5 x 30 2650 328 36 60 00 32 53 53 MF 552E3 2552E3-2200 5 x 30 2940 462 8 48 79 28 46 46 MF 5222E3 25222E3 45222E3 3300 8 x 30 3430 674 25 4 68 26 43 43 MF2 5332E3-45332E3 4700 8 x 38 4350 942 34 27 45 8 29 29 MF2 5472E3-45472E3 6800 2 x 38 4590 346 475 26 43 8 29 29 MF2 5682E3-45682E3 470 0 x 30 200 8 87 2 87 45 74 84 MF 647E3 2647E3-680 2.5 x 30 2550 244 08 8 36 35 59 64 MF 668E3 2668E3-000 2.5 x 30 2600 340 40 64 07 32 53 55 MF 602E3 2602E3-500 5 x 30 2890 490 90 49 82 28 46 46 MF 652E3 2652E3 4652E3 2200 8 x 30 330 700 260 43 7 27 44 44 MF2 6222E3-46222E3 3300 8 x 38 4350 030 370 28 47 8 29 29 MF2 6332E3-46332E3 4700 2 x 38 4470 450 50 27 44 8 29 29 MF2 6472E3-46472E3 220 0 x 30 990 46 75 92 320 52 87 24 MF 722E3 2722E3-330 2.5 x 30 2430 98 93 30 26 37 62 83 MF 733E3 2733E3-470 2.5 x 30 2550 266 5 0 69 35 58 70 MF 747E3 2747E3-680 5 x 30 2840 366 49 75 25 30 50 55 MF 768E3 2768E3 4768E3 000 8 x 30 350 520 200 59 99 28 47 49 MF2 702E3-4702E3 500 8 x 38 430 760 280 39 65 9 3 32 MF2 752E3-4752E3 2200 2 x 38 470 096 392 34 56 9 3 3 MF2 7222E3-47222E3 00 0 x 30 560 6 65 297 495 92 54 249 MF3 80E3 280E3-50 2.5 x 30 2050 53 78 95 325 6 02 62 MF3 85E3 285E3-220 2.5 x 30 250 206 95 49 249 55 92 26 MF3 822E3 2822E3-330 5 x 30 250 289 23 05 75 44 73 9 MF3 833E3 2833E3 4833E3 470 8 x 30 2860 395 58 8 35 38 64 74 MF4 847E3-4847E3 680 8 x 38 3720 554 2 55 92 26 43 49 MF4 868E3-4868E3 000 2 x 38 3780 796 292 44 74 25 4 43 MF4 802E3-4802E3 47 0 x 30 760 96 59 760 269 349 58 720 MF3 9479E3 29479E3-68 2.5 x 30 030 22 67 53 885 246 40 503 MF3 9689E3 29689E3-00 2.5 x 30 40 60 80 389 648 96 327 38 MF3 90E3 290E3-50 5 x 30 480 220 00 266 443 37 229 262 MF3 95E3 295E3 495E3 220 8 x 30 960 304 28 8 302 95 58 79 MF4 922E3-4922E3 330 8 x 38 2550 436 72 20 200 62 04 7 MF4 933E3-4933E3 470 2 x 38 2800 604 228 92 54 52 86 94 MF4 947E3-4947E3 Revision: 09-Jan-7 3 Document Number: 28336 For technical questions, contact: aluminumcaps@vishay.com
ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Current Leakage current Inductance Equivalent series inductance (ESL) CAPACITANCE (C) C C 0.2. CONDITIONS After min at U R After 5 min at U R AXIAL U s.5 x U R U rev V VALUE I L 0.02 C R x U R + 40 μa I L5 0.004 C R x U R + 40 μa MOUNTING RING Case Ø D x L mm: 0 x 30 Typ. 38 nh 2.5 x 30 Typ. 46 nh 5 x 30 Typ. 48 nh Typ. 39 nh 8 x 30 Typ. 50 nh Typ. 39 nh 8 x 38 Typ. 54 nh Typ. 39 nh 2 x 38 Typ. 59 nh Typ. 39 nh EQUIVALENT SERIES RESISTANCE () 0 0.0 0.9 0.8-40 - 20 0-20 - 40-60 - 80-00 - 20-40 - 60 All voltages; all case sizes T amb ( C) C 0 = Capacitance at 20 C, 00 Hz Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature 0 - - 40-20 0-20 - 40-60 - 80-00 - 20-40 - 60 40 V types T 0 = Typical at 20 C amb ( C) Fig. 6 - Typical multiplier of as a function of ambient temperature at different frequencies 2 3 Curve : All case sizes; 00 Hz Curve 2: Case Ø D x L = 8 x 38 and 2 x 38 mm; 0 to 00 khz Curve 3: Case Ø D x L = 5 x 30 and 8 x 30 mm; 0 to 00 khz Curve 4: Case Ø D x L = 0 x 30 and 2.5 x 30 mm; 0 to 00 khz 4 0 0 0 2 0 0 0 - Curve : All case sizes; 00 Hz 4 Curve 2: Case Ø D x L = 8 x 38 and 2 x 38 mm; 0 to 00 khz Curve 3: Case Ø D x L = 5 x 30 and 8 x 30 mm; 0 to 00 khz Curve 4: Case Ø D x L = 0 x 30 and 2.5 x 30 mm; 0 to 00 khz - 40-20 0-20 - 40-60 - 80-00 - 20-40 - 60 63 V types T 0 = Typical at 20 C amb ( C) Fig. 7 - Typical multiplier of as a function of ambient temperature at different frequencies 2 3 0 - Curve : All case sizes; 00 Hz 3 Curve 2: Case Ø D x L = 8 x 38 and 2 x 38 mm; 0 to 00 khz Curve 3: Case Ø D x L = 0 x 30 and 8 x 30 mm; 0 to 00 khz - 40-20 0-20 - 40-60 - 80-00 - 20-40 - 60 00 V types T 0 = Typical at 20 C amb ( C) Fig. 8 - Typical multiplier of as a function of ambient temperature at different frequencies 2 Revision: 09-Jan-7 4 Document Number: 28336 For technical questions, contact: aluminumcaps@vishay.com
RIPPLE CURRENT AND USEFUL LIFE Table 4 ENDURANCE TEST DURATION AND USEFUL LIFE ENDURANCE AT 25 C (h) Note Multiplier of useful life code: JW64 USEFUL LIFE AT 25 C (h) 4000 8000 3.6 JW64 I A I R 3.5 3.4 3.3 3.2 3. 3.0 2.8 2.6 2.4 2.2 Lifetime multiplier 2.0.5.0 0.25 0.25 0.5.8 2.0 3.0 I A = Actual ripple current at 0 khz I R = Rated ripple current at 0 khz, 25 C () Useful life at 25 C and I R applied: 8000 h.6 6.0 8.0 2 20 30 60 00 200 400.4.2.0 0.8 0.5 0.0 40 50 60 70 80 90 00 0 4.0 () 20 30 40 50 T amb ( C) Fig. 9 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 5 MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) FREQ. CODE 50 00 300 000 3000 0 000 I R MULTIPLIER MF 0.37 0.48 0.69 0.86 0.96.00 MF2 0.54 0.63 0.75 0.8 0.87.00 MF3 0.23 0.32 0.53 0.77 0.93.00 MF4 0.44 0.56 0.76 0.88 0.94.00 Revision: 09-Jan-7 5 Document Number: 28336 For technical questions, contact: aluminumcaps@vishay.com
Table 6 www.vishay.com TEST PROCEDURES AND REQUIREMENTS NAME OF TEST Endurance Useful life Shelf life (storage at high temperature) Reverse voltage TEST REFERENCE IEC 60384-4 / EN 30300 subclause 4.3 CECC 3030 subclause.8. IEC 60384-4 / EN 30300 subclause 4.7 IEC 60384-4 / EN 30300 subclause 4.5 PROCEDURE (quick reference) T amb = 25 C; U R applied; 4000 h T amb = 50 C; U R applied; 000 h T amb = 25 C; U R and I R applied; 8000 h T amb = 25 C; no voltage applied; 000 h (00 V: 500 h) T amb = 50 C; no voltage applied; 500 h for voltages: 63 V After test: U R to be applied for 30 min, 24 h to 48 h before measurement T amb = 25 C: 25 h at U = - V Followed by 25 h at U R REQUIREMENTS C/C: ± 5 % tan.3 x spec. limit Z 2 x spec. limit I L5 spec. limit C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit I L5 spec. limit no short or open circuit total failure percentage: % C/C, tan, Z: for requirements see Endurance test above I L5 2 x spec. limit C/C: ± 20 % tan spec. limit I L5 spec. limit Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 09-Jan-7 6 Document Number: 28336 For technical questions, contact: aluminumcaps@vishay.com
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000