INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS PP-FCTA Suspended Ceiling Adapter NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone: (001).714.632.7100 Fax: (001).714.632.1044 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 9530-302-001-08

Contents PP-FCTA Weight Limit... 2 Warning Statements... 2 Installation Tools... 3 Parts List... 3 Features... 4 PP-FCTA Installation... 5 Camera Screw Installation (optional)... 6 Mounting the PP-FCTA... 7 Securing the Ceiling Plate... 8 Electrical Box Cut-out Removal... 8 Ceiling Attachment... 9 Securing the 1 ½ NPT Pipe to the PP-FCTA... 10 Securing the Camera (optional)...11 Technical Specifications...11 Disclaimer... 12 Weight Limit Maximum Projector Weight: 50 lbs. Warning Statements THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE PROJECTOR. IF NOT, THE CEILING STRUCTURE MUST BE REINFORCED. PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS PERSONAL INJURY, OR EVEN DEATH. SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS. At least two qualified people should perform the assembly procedure. Personal injury and/or property damage can result from dropping or mishandling the projector. This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious personal injury. Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of impact. Contact Premier Mounts with any questions: (800) 368-9700 techsupport@mounts.com Page 2 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions

PP-FCTA Installation Tools The following tools may be required depending upon your particular installation. They are not included. Ladder Hand Held Drill Pencil Protective Eyewear Phillips Tip Screwdriver 1/8 Drill Bit 1/4 Concrete Drill Bit Hammer Hole Saw Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700. PP-FCTA Mount Hardware Main Ceiling Plate (Qty 1) Lower Adapter Plate (Qty 1) Upper Adapter Plate (Qty 1) Escutcheon Ring (Qty 1) ¼ -20 x 2 ¾ Pan Phillip Head Screw (Qty 1) ¼ -20 Wing Nuts (Qty 5) ¼ x 3 Eye Lag Screws (Qty 4) M6 x 2.4 Concrete Anchors (Qty 4) ¼ -20 Turnbuckles (Qty 4) 14-Gauge x 25 Galvanized Wire (Qty 4 Strands) M5 x 16mm Combo Screws (Qty 5) Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 3

Features The suspended ceiling adapter makes it easy to install and fine-tune the position of your overhead projector and organize its electrical wiring above the ceiling. PP-FCTA Mounting Coupler Use a set screw to hold any 1 ½ NPT pipe to the mounting coupler Adjustability Up to 9 of lateral shift Camera Screw Hole Use a 1/4-20 screw to mount a camera alongside the projector Electrical Access Knockouts for electrical or signal junction boxes Page 4 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions

PP-FCTA PP-FCTA Installation Introduction Read these instructions before installing your Premier Mounts product. Make sure you have all the parts and tools you need to safely complete the installation. Some of the steps in this installation may require two people to prevent personal injury and/or damage to the projector. Read all the warnings in the manual and always use proper safety equipment. Ceiling Plate Assembly Place the lower adapter plate with the threaded studs facing up through the adjustable slide slots of the main ceiling plate. The threaded studs will align with the adjustable slide on the main ceiling plate. Once the two pieces are together, align the mounting holes on the upper adapter plate with the threaded studs of the lower adapter plate. Place the three units together and loosely attach four (4) ¼ -20 wing nuts onto the threaded studs (see inset below). Are you adding a camera to the ceiling adapter? If Yes, proceed to the Camera Screw Installation (optional) section on page 6. If No, proceed to the Mounting the PP-FCTA section on page 7. ¼ -20 Wing nuts Upper Adapter Plate Main Ceiling Plate Adjustable Slide Slots Threaded Studs Lower Adapter Plate Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 5

Camera Screw Installation (optional) Make sure the camera supports one (1) 1/4-20 screw. Determine which screw hole on the upper adapter plate you will use to attach the camera. Insert one (1) 1/4-20 x 2 3/4 pan Phillips head screw through one (1) wing nut and the desired screw hole. PP-FCTA The screw should go through both the upper and lower adapter plates. It will later be used to mount the camera (see page 11). Do not overtighten the mounting screw. Proceed to the Mounting the PP-FCTA section. 1/4-20 x 2 3/4 pan Phillips head screw Wing nut 1/4-20 optional holes 1/4-20 threaded insert on camera (see page 11) Page 6 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions

PP-FCTA Mounting the PP-FCTA Pre-set four (4) M5 x 16mm combo screws on the ceiling plate assembly (two on each end of the plate). The M5 x 16 mm screws may be attached on the inner or outer lip of the main ceiling plate. Determine the ceiling tile you will use to attach the ceiling adapter. Use a pencil to measure and mark 3 from each edge of the t-bar frames to the inside of the tile (see diagram). Determine the mounting hole position inside the marked square of the tile and mark it with a pencil. If you are attaching a camera, mark an additional hole for the 1/4-20 screw next to the mounting coupler. ± ± Remove any of the 24 x 24 or 24 x 48 tiles that are surrounding the marked tile. ² ² Cut the mounting hole (and camera screw hole). ³ ³ Place the ceiling plate on the t-bar rails so that the mounting coupler can slide to align with the ceiling mounting hole. Proceed to the Securing the Ceiling Plate section on page 8. 1/4-20 optional holes M5 x 16mm Screws Ceiling Plate Assembly Upper Adapter Plate 3 3 Mounting Hole 3 3 T-Bar Frame Ceiling Tile Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 7

Securing the Ceiling Plate Once the ceiling plate assembly is resting on the t-bar frame rails, use a screwdriver to tighten the four (4) M5 x 16mm combo screws. Slide and center the upper plate assembly over the hole that was cut in the tile. Tighten all four (4) wing nuts. Do not overtighten the mounting screws. Upper Plate Assembly Upper Adapter Plate PP-FCTA Proceed to the Electrical Box Cut-out Removal section below. T-Bar Frame Rails M5 x 16mm Combo Screw Tiles Electrical Box Cut-out Removal Electrical installation should be completed by a certified electrician. Cut the tile where the electrical box is going to be secured. on electrical installation environment, install the electrical box and secure it to the ceiling plate assembly. Make all electrical connections at this time. Using (commercially available) hardware depending Proceed to the Attaching the Turnbuckles section. Electrical Box Cut-out Electrical Box (Commercially Available) Page 8 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions

PP-FCTA Ceiling Attachment Hook the four (4) turnbuckles into the four corners of the main ceiling plate. Then choose one of the three ceiling attachment Wood Stud Ceiling Determine a suitable structure capable of supporting the intended weight to drill the mounting holes. Set the holes so that wires from the main ceiling plate will angle 15 degrees outward (see Fig. 1). Use a 1/8 drill bit to drill the mounting holes. Secure the four (4) ¼ eye lag screws to the wood stud in the ceiling. Loop a wire through an eye lag screw (see Figure 2). ± ± Twist the wire at least five (5) times around itself to secure it. ² ² Run the other end of the wire through the turnbuckle. ³ ³ Twist the wire at least five (5) times around itself to secure it. Repeat steps 4-7 for the remaining three mounting points. The final loop on the wire has to be tightly bent and secured to prevent it from untwisting. Twist the turnbuckles to fine-tune adjust. Recheck all hardware and installation for proper tightness and security. Wood Stud Figure 1 15 Eye Lag Screw Proceed to the Securing the 1 ½ NPT to the PP-FCTA on page 11. Concrete Ceiling Determine a suitable structure capable of supporting the intended weight to drill the mounting holes. Set the holes so that wires from the main ceiling plate will angle 15 degrees outward (see Fig. 1). Use a ¼ concrete drill bit to drill the mounting holes. Place the concrete anchors into the drilled hole and gently tap into place using a rubber mallet or hammer. Loop a wire through a concrete anchor bolt (see Figure 2). ± ± Twist the wire at least five (5) times around itself to secure it. ² ² Run the other end of the wire through the turnbuckle. ³ ³ Twist the wire at least five (5) times around itself to secure it. Repeat steps 4-7 for the remaining three mounting points. The final loop on the wire has to be tightly bent and secured to prevent it from untwisting. Twist the turnbuckles to fine-tune adjust. Recheck all hardware and installation for proper tightness and security. Solid Surface Figure 2 15 Figure 1 Concrete Anchor Proceed to the Securing the 1 ½ NPT to the PP-FCTA on page 11. Figure 2 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 9

Ceiling Attachment (cont d) PP-FCTA Truss Ceiling Loop the wire around the truss (see Figure 1). Hang the wires from the trusses so that they will angle 15 degrees outward from the main ceiling plate (see Fig. 2). Twist the wire at least five (5) times around itself to secure it. Twist the wire at least five (5) times around itself to Run the other end of the wire through the turnbuckle. secure it. ± ± Repeat steps 1-4 for the remaining three mounting points. The final loop on the wire has to be tightly bent and secured to prevent it from untwisting. Twist the turnbuckles to fine-tune adjust. Recheck all hardware and installation for proper tightness and security. Ceiling Truss Figure 1 15 Proceed to the Securing the 1 ½ NPT Pipe to the PP-FCTA section below. Figure 2 Securing the 1 ½ NPT Pipe to the PP-FCTA Secure the 1 ½ NPT pipe to the mounting coupler and tighten the pipe. Secure the pipe using one (1) M5 x 16mm combo screw to the plate. The M5 x 16mm combo screw must be used to stabilize the 1 ½ NPT pipe. Attach the escutcheon ring to the 1 ½ NPT pipe beneath the ceiling tile. Are you adding a camera to the ceiling adapter? If Yes, proceed to the Securing the Camera (optional) section on page 11. If No, you have completed the ceiling adapter installation. 1-½ Pipe M5 x 16mm Screw Page 10 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions

PP-FCTA Securing the Camera (optional) Attach the camera to the bottom of the 1/4-20 pan Phillips head screw. The screw should be extending down through the ceiling tile next to the mounting hole. Use the screw s wing nut to tighten the camera against the tile. Technical Specifications All measurements are in inches. 1.18 (1.00) 1.18 23.36 4.5 4.21 4.02 8.43 11.37 14.87 24.75 8.43.81 1.18 1.00 24.75 3.25 6.50.75 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 11

Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY PP-FCTA What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs. What is Not Covered; Limitations PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS PRODUCTS. PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. What Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims. Warranty claims must also include a description of the problem, the purchaser s name, address, and telephone number. General inquiries can be addressed to Premier Mounts Customer Service at (800) 368-9700. Warranty claims will not be accepted over the phone or by fax. Premier Mounts Attn: Warranty Claim 3130 East Miraloma Ave. Anaheim, CA 92806 How State Law Applies THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Disclaimer Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Premier Mounts makes no representation of warranty, expressed or implied, regarding the information contained herein. Premier Mounts assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. Premier Mounts 2010 Page 12 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions

INSTALLATION INSTRUCTIONS PBC- UMW (White) PBC-UMS (Black) PBC UNIVERSAL PROJECTOR MOUNT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 Other Locations Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 Premier Mounts 2010 9530-002-021-0A

Table of Contents Warning Statements... - 2 - Parts List... - 3 - Installation Tools... - 3 - Features... - 5 - Projector Preparation... - 6 - Bracket Installation... - 8 - Leveling the Mounting Bracket... - 9 - Securing the Upper Assembly Ceiling Plate... - 10 - Securing the Projector to the Upper Assembly... - 11 - Final Adjustments... - 12 - Plastic Cap Installation... - 13 - Technical Specifications... - 14 - Warranty... - 15 - Warning Statements THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING 40 LBS. IF NOT, THE CEILING MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH. SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY. PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. Indicates that the power plug is to be disconnected Contact Premier Mounts with any questions. from the power outlet. Safety precautions must be taken at all times. Warning and Caution statements. A secure structure must support the weight, or load, of the projector. When mounting to a ceiling that contains wooden studs, dead center of the wooden stud must be confirmed prior to installation. Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the projector and/or damage to the mounting surface. Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the projector and could increase the risk of fire. At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the projector. Recommended mounting surfaces: wooden studs and solid-flat concrete. If the mount is to be installed on any surface other than wooden studs, use suitable hardware (which is commercially available). Installation Manual Page 2

Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700. Upper Assembly (Qty 1) Universal Mounting Bracket (Qty 1) #14 x 2 Wood Screws (Qty 3) M2.5 x 10mm Security head screws (Qty 4) M6 x 25 Security head screw (Qty 1) M3 x 12mm Security head screws (Qty 4) M4 x 12 Security head screws (Qty 4) M5 x 12 Security head screws (Qty 4) M6 x 12 Security head screws (Qty 4) Plastic barrel caps (Qty 4) Installation Tools Phillips Head Screw Driver Portable Drill Soft Material/ Blanket Pencil 1/8 Drill Bit Green Level (Supplied) Tape Measure Stud Finder (Commercially Available) Ladder M5 Security Allen Wrench (Supplied) M3 Security Allen Wrench (Supplied) Page 3 Installation Manual

A B C D E F G H I J K L M Single Wooden Stud Mounts Solid Structure Mounting Points M3 Security Allen Wrench Security Allen Wrench 1.5 nipple (NTP) Tension Knobs Safety Knob Security Screws Leveling Screws Universal Mounting bracket Leg Assembly Projector (not included) Tri-Lock Opening Option 1 H B C D F A C E G K NOTE: The four (two-piece) leg assemblies can be used as single leg or any combination of single and dual legs together as shown in Options 1 and 2. The number of legs may vary depending on the number of mounting points found on the bottom of the projector. I M J L D Combination Leg Option 2 M H Single Leg J L Installation Manual Page 4

Features Congratulations on your recent purchase of your PBC Universal Projector Mount. This mounting system is designed for projectors weighing 40lbs. (18.14 kg) or less. The mount is easy to install and is loaded with additional installation features built into the mount. These features allow you to optimize the projector s position to the screen for the best projector performance and picture quality. Can be mounted to the ceiling Tilt/Roll up to ±20 Rotates 360 Positive locking in any set position Quick release system for easy projector mounting and removal Cables can be routed inside pipe Upper ceiling plate allows for single wooden stud installation and cable insertion through the ceiling plate for a cleaner appearance Page 5 Installation Manual

Projector Preparation Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could result in serious personal injury and possible damage to the projector. THE PROJECTOR IS FRAGILE. HANDLE WITH CARE AT ALL TIMES. Review the projectors manufacture s operation manual and refer to the ceiling mounting section of the operator s manual. Here you will normally find important reference information regarding installation dimensions such as (distance from the screen to the lens of the projector, top of the lens placement to the top screen etc. Adherence to these recommendations during your installation will enhance the quality of your final image on the screen. Step 1. Carefully invert the projector and place it on a smooth, flat surface. Step 2. Identify the number of mounting points and screw thread size. Most projectors have either three of four mounting points and are M4, M5 or M6 in thread size (Figure 1). Mounting Points Inverted Projector Blanket/ Soft Cloth Flat Surface Figure 1. Projector Preparation Step 3. Separate the upper assembly from the projector mounting bracket by slightly loosening the two tension knurl knobs to create free play between the bracket tri-lock assembly and the upper section tri-lock assembly points (Figure 2A and Figure 2B). Step 4. Loosen the security screw knurl knob far enough to allow the two parts to be rotated 180 apart and separate (Figure 2C). Installation Manual Page 6

A B Upper Assembly Tension Knobs Safety Knob Rotate 180 To unlock C Tri-Lock Opening Figure 2. Mount Preparation Page 7 Installation Manual

Bracket Installation Only attach to the projector manufacturer s specified mounting points on the projector chassis with a minimum of three mounting legs. Please follow all safety instructions specified by the projector manufacturer as well as the safety instructions outlined in this manual. The two-piece mounting legs are designed to allow for the positioning of each leg around projector air vents located on the base of the projector. Where applicable, each leg mount may be shortened by removing the locking screw. This will allow for a better bracket fit, overall. For easier installation, the mounting legs should be first mounted to the projector. Each leg should then be adjusted so that they can mount to the Universal Mount (Figure 3). Step 1. Locate the mounting points on the bottom of the projector and use the appropriate number of mounting legs. Step 2. Select the mounting hardware that the projector requires and loosely install the universal mount on the projector. Installation Manual Page 8

Leveling the Mounting Bracket Secure but do not over tighten the mounting hardware. Failure to do so will result in damaging the threads in the projector. Step 1. Rotate the leveling barrels to level the mounting bracket. Step 2. Position the mounting bracket so that it avoids most, if not all, ventilation points (including lamp and filter access doors). Step 3. When the desired position is achieved, tighten the mounting screws to the projector and then tighten the security hex head leg screws with the M5 Security Allen Wrench (Figure 4). M5 Security Allen Wrench Level Inverted Projector DOWN Leveling Barrels UP Adjusting the Mount Figure 4. Leveling the Mounting Bracket Page - 9 - Installation Manual

Securing the Upper Assembly Ceiling Plate Review your projector s owner s manual to determine what distance is recommended from the front of the lens to the edge of the screen for best picture ratio. However in most home theater and office ceiling mount installations this is not practical as the projector would be to low within the room. At a minimum you should at least locate the inverted projectors top of the lens point to a point centered horizontally on the screen and no higher then the top image edge of the screen). Most projector manufacturers prefer to have the center of the projector lens centered of the top of the screen when the projector is inverted for ceiling mounting. It is normally better to have the top edge of the lens as close to parallel with the top image edge of the screen as well. Before you mount your screen and projector, make sure the mounting location will safely support the weight of the projector. Make sure to measure from the center of the mounting bracket to the front edge of the lens to determine the proper placement of the center of the upper assembly. Step 1. Secure the ceiling assembly into a solid wood ceiling stud with the two (2) #14 x 2 wood screws (supplied) or with other (commercially available) hardware depending on your installation environment (Figure 5). Ceiling Structure Wooden Ceiling Stud #14 x 2 Wood Screws Secure the ceiling mount to the center of the wooden stud. Upper Assembly Figure 5. Securing the Upper Assembly Ceiling Plate Installation Manual Page - 10 -

Securing the Projector to the Upper Assembly Step 1. Make sure the three-knurl knobs are loosened to fully expose to the tri-lock mounting plate in the base of the upper assembly. Step 2. Carefully lift the projector and insert the mounting bracket mating special tri-lock cutout into the mating portion of the upper assembly. Step 3. Once inserted rotate the projector and mounting bracket 180 and secure the rear safety knob first to prevent further rotation of the bracket in the upper assembly. Step 4. Tighten the remaining two tension knurl knobs until the mount becomes rigid. The safety knob should line up with the alignment slot on the mounting bracket. Follow the numbering sequence prior to securing the projector to the upper assembly. 3 The alignment slot must be in direct alignment with the safety knob to lock the mounting bracket to the upper assembly. Insert universal bracket to the tri-lock, then rotate the projector 180 2 To secure the mount, replace the red safety knurl knob with one (1) M6 x 25 security screw (supplied). Tension Knurl Knobs Universal Mount 1 Tri-Lock Openin g Alignment Slot Projector Figure 6. Low Profile Installation Page - 11 - Installation Manual

Final Adjustments Step 1. With the projector secured in the mount and power on and signal supplied to the projector you can now proceed with the final height, tilt, roll and yaw to optimize the projected image. A The height can be adjusted by rotating the PBC clockwise (higher) / counterclockwise (lower). Once the height is achieved, tighten the locking set screw using the supplied Security Allen Wrench. B To adjust the tilt angle of the projector, slightly loosen the side M8 screws and tilt to the desired angle and firmly tighten the two M8 adjustment screws. C If roll adjustment is needed to square the images on the screen, slightly loosen the front and rear M8 screws and adjust to the desired angle. Then firmly tighten the two M8 adjustment screws. A Wooden Stud Ceiling Structure Locking Set Screw B Wooden Stud Ceiling Structure C (Roll) Adjusting Screws Re-check the hardware for tightness and security. Figure 7. Final Adjustments Installation Manual Page - 12 -

Plastic Cap Installation Step 1. Once all the final adjustments have been finished, install the plastic caps on the leveling barrels (Figure 8). Figure 8. Plastic Cap Installation Page - 13 - Installation Manual

Technical Specifications All measurements are in inches (mm) Security 1.5 (NPT) Nipple Figure 9. Technical Dimensions Installation Manual Page - 14 -

Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs. What is Not Covered; Limitations PR E MIE R MOUNTS DISCL AIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPT E R S, DISPL AY S, PR OJE CTOR S, OTHER PROPERTY, OR PERSONAL INJURY RESUL T ING, IN WHOL E OR IN PART, FR OM IMPR OPE R INSTAL LATION, MODIFICATION, USE OR MISUSE OF IT S PR ODUCTS. PR E MIE R MOUNTS DISCL AIMS ALL OTHER WAR R ANTIE S, E XPR E SS OR IMPLIED, INCL UDING WAR R ANT IE S OF MERCHANTABILITY AND FIT NE SS FOR A PAR TICULAR PUR POSE. PR E MIE R MOUNTS IS NOT R ESPONSIBL E FOR INCIDE NT AL OR CONSE QUE NT IAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR L ABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PR ODUCT S OR PARTS. SOME STATES DO NOT AL L OW THE EXCLUSION OR L IMITATION OF INCIDE NT AL OR CONSE QUE NTIAL DAMAGE S, SO THE ABOVE LIMITATION OR EXCL USION MAY NOT APPL Y TO YOU. What Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims. Warranty claims must also include a description of the problem, the purchaser s name, address, and telephone number. General inquiries can be addressed to Premier Mounts Customer Service at 1-800-368-9700. Warranty claims will not be accepted over the phone or by fax. Premier Mounts Attn: Warranty Claim 3130 E. Miraloma Avenue Anaheim, CA 92806 How State Law Applies T HIS WAR R ANTY GIVE S YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY AL SO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Page - 15 - Installation Manual