Architectural Accessories & Door Trim McKinney Canadian List s Effective April 4, 206 2006-206 McKinney Products Company
general information Table of Contents 800-46-3007 www.assaabloy.ca General Information... GEN- GEN-8 es... GEN-4 GEN-5 Options... GEN-6 GEN-7 Index... GEN-8 Full Mortise s... FM- FM-23 MacPro... FM-22, FM-23 Electric s... EH- EH- MacPro Electric s... EH-7 Full Mortise Anchor Sets... AH- AH-4 Half Mortise s... HM- HM-3 Half Surface s and Back Plates... HS- HS-3 Full Surface s... FS- FS-2 Spring s & Pivots... SH- SH-4 MacPro... SH-2 Rescue Hardware... RH- Specialty s & Residential... SP- StormPro s... SP- Designer Hardware - Deco Tips... DH- DH-5 Aluminum Continuous Geared s... CG- CG-4 s Effective April 4, 206 GEN-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
ASSA ABLOY Door Security Solutions Canada, a division of ASSA ABLOY of Canada Ltd. and all of its current and future associated companies, subsidiaries and operating brands (hence forth referred to as ASSA ABLOY DSS Canada) reserve the right to decline an order, in whole or in part, when the type or quantity of goods or credit worthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion. The terms and conditions contained herein constitute the entire agreement between the parties. Purchase Orders, Quotations ( Quote ) requests, Acknowledgements or the like issued by the Purchaser that have contrary standard terms and conditions are not binding on ASSA ABLOY DSS Canada, unless such terms and conditions are approved in a separate written agreement by ASSA ABLOY DSS Canada s authorized representatives. In the event of an acceptance of Purchaser s Purchase Order by ASSA ABLOY DSS Canada, the Purchaser agrees that such acceptance is solely conditioned on Purchaser s acceptance of the terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the Purchaser s Purchase order. The terms and conditions in Purchaser s Purchase Order which conflict with terms and conditions of this instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement between ASSA ABLOY DSS Canada and the Purchaser. In the event that ASSA ABLOY DSS Canada does not enforce or require strict performance of any term or condition hereof, or of any other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of strict performance will not waive, affect or diminish any right of ASSA ABLOY DSS Canada to enforce or require strict performance of such term or condition in the future. s: All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect at the time of order acceptance. Possession of this price list does not constitute an agreement to sell. Acknowledgements, invoices and quotations are on an Errors and Omissions Excepted basis (commonly referred to as E.O.E.). We reserve the right to correct clerical, stenographic and other obvious errors at any time. 800-46-3007 www.assaabloy.ca Terms: 2% tenth of the month following, net thirty (30) days after statement date. It is understood that ASSA ABLOY DSS Canada may impose and charge a finance charge of 2% per month or the highest rate allowed by law on any amount which becomes past due and delinquent. Additionally, the Customer shall be responsible for all collection costs, court costs and reasonable attorney s fees in connection with the recovery of any delinquent amount. Minimum Invoice: Minimum invoice for complete product is $250.00 net product value. The minimum invoice for parts orders is $00.00 net product value. Any orders not totaling these minimums will be invoiced at the minimums. This policy does not include the following: Cut (bitted) Keys of any type, Master Keyed Cylinders, Master Keyed Padlocks and Factory Generated Bitting Lists. Same day order expedites will be invoiced at book less 50%. Quotations: If ASSA ABLOY DSS Canada elects to offer a Quote, such Quote will be valid for ninety (90) days. Complete shipment of the order must be accepted by Purchaser within nine (9) calendar months from the date of issuance. The Quote number and project name must be referenced on the order. Any invoiced order that has the incorrect discount applied to it and did not have a Quote copy attached to the order or the Quote number written on the order will have a service fee of $75.00 net DEDUCTED from any sales credit issued for the difference in discount. The Quote is null and void if the Purchase Order does not include ALL product lines listed on the Quote or if the quantities for an item covered by the Quote deviate by 0% or more. The Purchaser will have to solicit a new quotation. Changes to original quote will be accepted up to thirty (30) days from the date of the original quote. All changes must reference the original quote number. With the issuance and acceptance of a Quote for the purchase of products, the Purchaser agrees that products so purchased will not be resold or transferred any Distributor not authorized by ASSA ABLOY DSS Canada to sell its products. This would be inclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor s ineligibility for Quotes, or other actions in ASSA ABLOY DSS Canada s discretion. ASSA ABLOY DSS Canada and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse a Distributor s request to quote a price other than ASSA ABLOY DSS Canada s standard list price and regardless of whether ASSA ABLOY DSS Canada or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders. Special Orders: Products not cataloged or listed in this price book will be considered as special products, and will not be manufactured without prior approval from ASSA ABLOY DSS Canada. A minimum special handling charge of $50.00 will be added for non-cataloged product. Any additional labour or material required will be charged accordingly. Special products require special handling, and therefore standard lead times may not apply. Please consult with your Sales Representative for further details. High Security Orders: To ensure proper control of End User restricted Products, ASSA ABLOY DSS Canada requires that the End User complete a Delivery of Controlled component form indicating to whom the product will be shipped to upon leaving the factory or the distribution centre. All orders must be accompanied with a current copy of the Authorization form and must be signed by the proper authorized personnel whose name(s) is on file with ASSA ABLOY DSS Canada. High Security products are defined as high security key blanks, cut keys, sidebars, sub assemblies, complete and master-keyed cylinders, and key charts. ASSA ABLOY DSS Canada reserves the right to request authorization from the end user if necessary before the order is processed. Changes / Cancellation of Orders: Changes or cancellations to a non stock order that has been released to production will be subject to a charge of costs for material and labour general information s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-
general information expenses that have been incurred prior to notification from Customer. Handling charges are billed on Customer s original order. All change requests for Mercury or Turbo goods must be submitted in writing to Customer Service within two (2) business days of receipt of acknowledgement of the order. In those instances where a cancellation is accepted, ASSA ABLOY DSS Canada reserves the right to make a reasonable cancellation charge based on expenses incurred. Packaging: Many items are defined as to Lot Packaging or Minimum Order. The case lot policy does not apply to hardware to be used on a specific hardware project. Delivery: Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Complete information is required to process all orders. Orders with insufficient information for processing (i.e. keying information, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtaining the necessary information for order processing. Manufacturing lead time will begin once all information is received to process an order. ASSA ABLOY DSS Canada will use reasonable efforts to deliver products as estimated, but makes no guarantee as to delivery dates. ASSA ABLOY DSS Canada will not be liable for back charges incurred based on availability of product or as a result of delays in delivery caused by insufficient information required to process an order. ASSA ABLOY DSS Canada will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causes beyond our control, including the delivery of material to us. Under no circumstances shall ASSA ABLOY DSS Canada be liable or accountable for consequential damages due to failure of delivery. Unless your order specifies otherwise, partial shipments will be made on or after the scheduled delivery date. Terms of Shipment: All products are shipped FOB the factory or the distribution center unless otherwise agreed to in writing from ASSA ABLOY DSS Canada. Title to 800-46-3007 www.assaabloy.ca and risk of loss product shipped is the responsibility of the purchaser and delivery is deemed to be complete upon transfer of the product to a common carrier. Carriers carry limited insurance. If the customer requires additional insurance coverage please contact our customer service department. All claims for shortages and damage are the responsibility of the purchaser. ASSA ABLOY DSS Canada will assist the Purchaser with documentation necessary to make a claim if requested to do so by the purchaser. ASSA ABLOY DSS Canada will ship via the best possible carrier. Shipments at the customer s request will be prepaid and any up-charge (actual cost less the amount negotiated by ASSA ABLOY DSS Canada) will be added to the invoice. Claims: In the event of ASSA ABLOY DSS Canada or Customer error, claims for shortages, pricing errors and/ or incorrectly filled orders must be submitted in writing to Customer Service within thirty (30) days from receipt of material. Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier. Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact a ASSA ABLOY DSS Canada Customer Service Representative upon submittal of the order. ASSA ABLOY DSS Canada will obtain requested insurance and the additional cost will be included on Customer s invoice. Invoice Deduction: A ASSA ABLOY DSS Canada Sales Representative or Customer Service Representative must be notified of any disputed invoices within thirty (30) days from the date of invoice. Deductions should only be taken for the disputed amount and the balance of the invoice is due and payable within standard payment terms. Returned Goods: No Material is to be returned to our facilities without prior written approval from customer service. It is the policy of ASSA ABLOY DSS Canada to not accept returns of any materials that are correctly furnished as per the Distributor s Purchase Order. Mercury and Turbo material may be returned with approval, if ASSA ABLOY DSS Canada believes the product is resalable. All such product must be returned in its original unmarked carton. The goods must have been shipped and invoiced in the previous sixty (60) days. Returns will be at the distributor s expense. The goods returned will be subject to inspection and a minimum 20% restocking fee will be applied to compensate for the cost of inspection, repacking and handling. Return of product due to customer order error or accommodation must be pre-arranged with ASSA ABLOY DSS Canada and approved in writing by Sales Management. A minimal restocking fee of 50% will be charged. Upon receipt and verification by ASSA ABLOY DSS Canada that the returned merchandise is in saleable condition and that the material can be returned to the original manufacturer. Defective goods that are out of warranty period will not be accepted for return. Products that are masterkeyed, special orders, key bitted will not be accepted under any circumstances, unless the product is determined to be defective. Procedure: Ensure the RGA labels that are sent to Purchaser by ASSA ABLOY DSS Canada are visible on return goods shipment. Ensure that the RGA number appears on the return shipment label and is legible. Return the authorized merchandise within sixty (60) days from the date of RGA issuance. Return shipments must be freight prepaid to the distribution centre (at time some directions may apply to return the goods to the original manufacturer) ASSA ABLOY DSS Canada is not liable for damages to product during shipping. No credit may be taken or issued prior to RGA approval and receipt of product. All defective goods within the terms of our limited warranty may be returned for repair or replacement only. Taxes: s do not include any present or future Federal, Province, or Local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments, which may result from transactions or any services performed in connection herewith. s Effective April 4, 206 GEN-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Governing Law: The rights and obligations of the parties shall be governed by the laws of the Province of Ontario, excluding any conflicts of law provisions. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Limited Warranty: ASSA ABLOY DSS Canada represents and warrants the products against defective material and workmanship under normal use and service. ASSA ABLOY DSS Canada further warrants the to meet BHMAC quality standards at the time of delivery. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-assa ABLOY DSS Canada products or parts. The only liability of ASSA ABLOY DSS Canada in tort or contract whether under this warranty or otherwise, shall be limited to the repair or replacement of any product or component part which shall prove defective as covered by this warranty, within the stated time period listed below, after delivery to the original purchaser. The items covered by the Limited Warranty and the warranty period are shown in the accompanying schedule(s). ASSA ABLOY DSS Canada will not pay for the cost of repair performed other than in accordance with this warranty. Refer to our Returned Goods Policy regarding the return of a product or component part believed to be defective as covered by this warranty. A brief description of the defect will be required. Product will be examined upon return. In the event such examination reveals a defect covered by this warranty, the product will be repaired or replaced. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ASSA ABLOY DSS Canada and its subsidiaries, associated companies and partners SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL 800-46-3007 www.assaabloy.ca DAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS WARRANTY. Except as expressly set forth ASSA ABLOY DSS Canada makes no other representations or warranties, expressed or implied at law or in equity, with respect to the products or their characteristics, quality or performance, including without limitation, the implied warranties of merchantability, fitness for a particular purpose or non infringement of any intellectual property rights of third parties and any such representations and warranties are hereby expressly disclaimed. SOME PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM PROVINCE TO PROVINCE. Indemnity: Purchaser shall indemnify ASSA ABLOY DSS Canada and hold ASSA ABLOY DSS Canada harmless against all claims, liability, loss or other damages (including costs, legal or otherwise incurred by ASSA ABLOY DSS Canada) to all persons for injury of any nature, including sickness and/or death, property damage at the time of delivery or after when the product is no longer in ASSA ABLOY DSS Canada possession or control. Force Majeur: ASSA ABLOY DSS Canada shall not be liable for its failure to perform due to any contingencies beyond its control, including but not limited to acts of God, fires floods, wars, sabotage, accidents, labour disputes, shortages, government laws, ordinances, rules and regulations. ASSA ABLOY DSS Canada shall not be liable for its failure to deliver due to its inability to obtain materials, equipment failure, labour actions, transportation issues or any similar contingencies. In the event of delays due to the aforementioned contingencies, the date of delivery will be postponed by such length of time as the circumstances dictate. Copyrights and Patents: All products in ASSA ABLOY DSS Canada catalogues, brochures and price lists are either patented, Copyrighted or registered by ASSA ABLOY DSS Canada. WARRANTY McKinney products are not designed for or intended for aftermarket modification. The warranty on McKinney products becomes void if the product is modified in any way, regardless of whether the modification causes or contributes to any alleged defect. Warranty voiding modifications include, but are not limited to, thirdparty electrification of non-electric products and/or the installation of non-approved or non-mckinney components. If a McKinney product is modified it no longer meets industry certification and quality control standards applicable to the original product and is no longer a genuine McKinney product. A modified product may not be sold as a McKinney product and no McKinney trademarks or certification marks based on the original McKinney product, such as (but not limited to) U.L. or ANSI/BHMA marks, may appear anywhere on the modified product or on any packaging, literature or instructions sold with the modified product. All original McKinney packaging and literature carries McKinney trademarks and must be destroyed if the original McKinney product is modified. Portions of the product that carry a McKinney trademark or certification mark must be discarded and/or replaced by the party making the modification. U.L. and other certification testing and markings are also the responsibility of the party making the modification. The use of McKinney trademarks on modified products constitutes trademark infringement. Trademarks: McKinney is a registered trademark of McKinney Manufacturing Company. Other product brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purpose only. general information s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-3
general information 800-46-3007 www.assaabloy.ca McKinney and B.H.M.A. Symbols BHMA Code Base Material Ferrous (Steel) Non-Ferrous (Brass or Stainless) 600 P 632 605 3 633 606 4 638 609 5 636 60 7 637 6 9 639 62 0 64 64 0A 640 63 0B 643 66 645 68 4 646 69 5 647 620 5A 649 623 20 650 624 20A 65 625 26 652 626 26D 629 32 630 32D McKinney FINISH s Effective April 4, 206 GEN-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
McKinney and Government Symbols 800-46-3007 www.assaabloy.ca U.S. Description McKinney U.S.P. Prime Powder Coat for Painting P Listed U.S. 3 Bright Brass 3 Listed U.S. 4 Dull Brass 4 Listed U.S. 5 Dull Brass, Oxidized 5* 30% over 0B U.S. 7 Brass, Nickel Oxidized, Bright Relieved 7* 30% over 0B U.S. 9 Bright Bronze 9 30% over 0B U.S. 0 Dull Bronze 0 Listed U.S. 0A Antique Bronze, Oiled and Lacquered 0A Listed U.S. 0B Antique Bronze, Oiled 0B Listed U.S. Dull Bronze, Oxidized * 30% over 0B U.S. 4 Bright Nickel Plated 4 Same as 26 U.S. 5 Dull Nickel Plated 5 Same as 26D U.S. 5A Nickel Oxidized Relieved 5A* P.O.A. U.S. 20 Statuary Bronze, Light 20* 30% over 0B U.S. 20A Statuary Bronze, Dark 20A* 30% over 0B U.S. 26 Bright Chromium 26 Listed U.S. 26D Dull Chromium 26D Listed U.S. 32 Polished Stainless Steel 32 Listed U.S. 32D Dull Stainless Steel 32D Listed general information * Check with the factory for availability and pricing on these finishes McKinney Powder Coat es MicroShield Agion Antimicrobial 32DBIO P.O.A. Aluminum AP Listed Bright Brass w/ Clear Powder Coat 3-C 30% over 0B Dull Brass w/ Clear Powder Coat 4-C 30% over 0B Dark Bronze Powder Coat D-3 Same as AP Black Powder Coat D-4 Same as AP Dark Oxidized Satin Bronze 0-BE 5% Less than 0B CPC or 0B over Stainless add 0% to 32D price. Every effort is made by McKINNEY to furnish finishes which do comply with the Standard, however we cannot guarantee that our finish will match other manufacturers finish. Where a special finish or a matched finish is required, a sample must be submitted with the order. * P.O.A. on Application Consult the factory for pricing and availability on these custom finishes. 722 or EB 30% over 0B for clear coats s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-5
general information No Logo 800-46-3007 www.assaabloy.ca Options/Additions Where Not Listed s supplied less McKINNEY logo (not available on LISTED s) - New lead times will apply and factory may need to adjust lead times after lead time of order is originally acknowledged. Blank s (No Screw Holes) Blank hinges regularly furnished without swaging (flat back) unless otherwise specified. Bulk Package, Suffix BP Consult factory for availability Special Swaging Special Swaging Add 30% to price Add 30% to price No additional charge Add 30% to price Add $6.50 to electrical option add for all Swing Clear s CC Option- Concealed Circuit Brass, Steel or Stainless Steel Base Add 4 wires - suffix CC4 $459.00 6 wires - suffix CC6 $593.00 8 wires - suffix CC8 $77.00 0 wires - suffix CC0 $83.00 2 wires - suffix CC2 $930.00 Extra Long Leads (over 2") for CC4, QC4 $7.00 per foot Extra Long Leads (over 2") for CC6, QC6 $25.00 per foot Extra Long Leads (over 2") for CC8, QC8 $32.00 per foot CC Option- Concealed Circuit with 2 8-Gauge Wires Brass, Steel or Stainless Steel Base Add 4' Lead Add 2 wires - suffix CC2-8 $459.00 $36.00 4 wires - suffix CC4-8 $459.00 $39.00 6 wires - suffix CC6-8 $593.00 $42.00 8 wires - suffix CC8-8 $77.00 $45.00 0 wires - suffix CC0-8 $842.00 $50.00 * s are provided with two 8-gauge wires, additional wires will remain standard 28-guage QC Option- Electrolynx Quick Connect Concealed Circuit Brass, Steel or Stainless Steel Base Add 2 wires - suffix Qc2 $335.00 4 wires - suffix QC4 $472.00 6 wires - suffix QC6 $606.00 8 wires - suffix QC8 $73.00 0 wires - suffix QC0 $856.00 2 wires - suffix QC2 $980.00 Extra 6" Pigtail for QC Butt Add 0977 QC2 Pigtail $7.00 0976 QC4 Pigtail $25.00 0975 QC8 Pigtail $32.00 MG 6 Mortar Guard ( #63333) $4.00 each s Effective April 4, 206 GEN-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Options/Additions Where Not Listed PoE Option - Power over Ethernet Available on 4 2" and height hinges only Add Brass or Steel Base $,38.00 MM Option - Magnetic Monitoring Add Magnetic Monitoring - suffix MM $403.00 Extra Heavy Magnetic Monitoring - suffix EHM $424.00 MM Magnet Assembly Only $09.00 EHM Magnet Assembly Only $3.00 MM Magnet Assembly & Switch $6.00 EHM Magnet Assembly & Switch $26.00 800-46-3007 www.assaabloy.ca general information Non Removable Door Suffix NRD Moderne only (2 Knuckle) One NRD provided per set of 3 hinges Non Removable Pins Set screw in barrel suffix (NRP NRP SET SCS ONLY $.50 EA NO DISC) Raised Barrel Full Mortise s Bearing s Only Raised barrel prefix RB Standard and Heavy Weight. x 4 2" Heavy Weight Only. s are NRP and reversible for handing Round Corner Prefix RC Add $6.00 per door Add $0.00 each Add $37.00 each 4" round corner full mortise only Add $2.00 each 5 32" round corner full mortise 4 2" or larger Add $2.00 each Round corner hinges (RC) will be furnished in 4" radius unless otherwise specified Replacement steel pins standard weight Replacement steel pins heavy weight Beveled s (where doors are beveled on hinge side specify as follows) For 2 knuckle and 3 knuckle hinges use 5000 series. Example TA793 or TA792 will become TA5793 or TA5792 For 2 knuckle and 5 knuckle hinges use a 4000 series. Example TA274 or T4A3386 will become a TA474 or T4A4386 TA273 will become a TA473, A TA3350 becomes a TA4350 Safety Stud Featured Suffix SSF Prison Safety Feature Suffix PSF (available HTA386 (32D) only) Slip in s Suffix SIH Type I (Handed), SIH Type II Regular weight bearing hinge only (Indicate hand when ordering) Add $3.00 each Add $3.00 each If a part # is not shown in price book for Beveled Edge, add 0% to the price of Square Edge Add $4.00 each Add $33.00 each Add $27.00 each Special Screws ( 2" x 2-24 machine" - 4" x 2 wood) Consult factory for price and minimum requirements on additional sizes Steel Spanner Head $4.00 each Brass Spanner Head $5.00 each Stainless Steel Spanner Head $6.00 each Spanner bit holder tool $38.00 each Spanner bit (for use in holder) $23.00 each TORX Pin head security screws - Suffix TXS, machine screws provided. Wood screws by request only Steel Torx $4.00 each Stainless Torx $4.00 each TORX bit* $36.00 each TORX bit holder tool* $49.00 each *#20-2" x 2-24 & 4" x 2 wood screw *#25-2" x 4"-20 machine screw, 2" x 2 wood screw TIPS -- Hospital Tips Prefix H Regular weight plain bearing, oil impregnated or ball Heavy weight oil impregnated or ball Solid Brass Ball Tips suffix x BT up to 6" in height Solid Brass Steeple Tips suffix x ST up to 6" in height Deco Tips for two and three knuckle suffix standard weight hinges only, where not listed, suffix RT, FT, GT, LT Architectural Hardware Presentation Folder FS86 Perforated cardboard shims # 7588 Add $26.00 each Add $26.00 each Add $3.00 each Add $3.00 each Add $8.00 each $25.00 net $2.00 per hundred s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-7
800-46-3007 www.assaabloy.ca general information Index 45 SH-2 452 SH-2 453 SH-2 00 SH-2 400 SP- 44 SP- 458 SP- 502, 502R SH- 522 SH- 552 SH- 572 SH-2 300 SH-3 4007-MRB SH-4 4007RB SH-4 8007 SH-4 900 SH-2 900 SH-3 BP-0 HS-3 BP- HS-3 BP-2 HS-3 CSS-9 MISC- DLS-8 MISC- DS-6 MISC- Deco s DH- DH-5 78000 Series DH- DH-5 EP-5J MISC-2 ET HINGES Call for info. H8007 SH-4 HS00 SH-3 HTA386 FM-2 HTA74 FM-4 HTA786 FM-5 HTA274 FM- HTB386 FM-2 HTB786 FM-5 J300 SH-3 K-MCK-2HD CG-4 MCK-2HD CG-4 MCK-4HD CG-4 MCK-22HD CG-4 MCK-25HD CG-4 MCK-54HD CG-5 MCK-58HD CG-5 MCK-WTHD CG-4 MCK-FM300 CH-6 MCK-FM327 CH-7 MCK-FM3500 CH-8 MCK-FS30 CH-7 MCK-FS302 CH-8 MCK-FS309 CH-8 MCK-FS32 CH-8 MCK-FS350 CH-8 MCK-FS3502 CH-9 MCK-FM3700 CH-9 MCK-FS370 CH-9 MCK-FS3702 CH-9 MCK-HG305 CH-6 MCK-HG306 CH-7 MCK-HG30 CH-8 MCK-HG3 MCK-HG35 MCK-HG322 MCK-HG323 MCK-HG326 MCK-HG3505 MCK-HM304 MCK-HS303 MCK-HS3703 MG-6 MP79 MPB79 MPS60 MPB68 MPB9 MPB99 MPS60 MPS679 PH-4 SP3786 SP3386 SQ333 T234 T274 T2772 T2774 TA34 TA37 TA372 TA374 TA38 TA382 TA384 TA386 TA39 TA392 TA393 TA394 TA74 TA77 TA772 TA774 TA78 TA782 TA784 TA786 TA789 TA79 TA792 TA793 TA794 TA797 TA795 TA796 TA234 TA2372 TA2395 TA2398 TA274 CH-7 CH-6 CH-6 CH-6 CH-6 CH-9 CH-7 CH-7 CH-9 GEN-4 FM-24 FM-24 SH-2 FM-25 FM-25 FM-25 SH-2 SH-2 SP- SP- SP- DH-5 FM-6 FM-8 FM-9 HS-2 HM-2 FM- FS- HS- HM- FS- HS- HM- FM-2 AH- AH- AH- AH- FM-3 FM-4 FS- HS- HM- FS- HS-2 HM- HM-2 FM-5 HM-2 AH-2 AH-3 AH-3 AH-3 FS-2 FM-5 HS-2 FM-6 FM-7 HS- FM-8 FM-8 FM-9 FM-0 TA273 TA277 TA2772 TA2774 TA2798 TA2895 TA333 TA3350 TA3374 TA3383 TA3750 TA4395 TA4895 TA5392 TA5393 TA5394 TA5792 TA5793 TA5794 TA234BT TA234ST TCA234 TCA274 TCA3386 TCA3786 T4A338 T4A3382 T4A3384 T4A3386 T4A3395 T4A378 T4A3782 T4A3784 T4A3786 T4A3795 T4A3796 T4A3789 T4A4795 T4B3386 T6A3786 FM-2 FM-4 FS-2 HS-2 HM-2 FM-4 FM-5 FM-5 FM-6 FM-7 FM-7 FM-8 HM-2 DH-5 FM-2 FM-5 FM-5, FM-24 AH-2 AH-2 AH-3 AH-3 AH-4 AH-4 FM-8 FM-8 FM-7 FM-0 FM- FM-9 FM-23 FS-2 HS-3 HM-3 FM-8 FM-20 FM-20 FS-2 HS-3 HM-3 FM-2 FM-22 FM-23 HS-3 HM-3 FM-23 FM-9 FM-23 s Effective April 4, 206 GEN-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
800-46-3007 www.assaabloy.ca Standard Weight Three Knuckle Non-Ferrous Bearings TA34 FULL MORTISE HINGES 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 6933 P 4.00 6934 AP 4.00 69322 3 60.00 6935 4 4.00 6936 0 4.00 69325 0A 60.00 6937 0B 60.00 69320 26 60.00 6932 26D 43.00 69323 32D 75.00 69328 P 52.00 69329 AP 52.00 73709 3 53.00 69330 4 52.00 6933 0 52.00 69340 0A 53.00 69332 0B 53.00 7374 26 53.00 69327 26D 52.00 69338 32D 89.00 69343 P 62.00 69344 AP 62.00 69352 3 75.00 69345 4 62.00 69346 0 62.00 6934 0A 75.00 69347 0B 75.00 69350 26 75.00 69342 26D 75.00 69354 32 7.00 69353 32D 95.00 3 48 33 3 48 46 3 48 53 56402 32D-NRP 00.00 3 48 53 69358 P 62.00 69359 AP 62.00 69367 3 75.00 69360 4 62.00 6936 0 62.00 69355 0A 75.00 69362 0B 75.00 69365 26 75.00 69357 26D 75.00 69369 32 7.00 69368 32D 95.00 3 48 57 NRP x 4" 27 mm x 0.60 mm x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm 69370 0-NRP 68.00 6937 26D-NRP 7.00 69356 32D-NRP 00.00 73882 P 83.00 73883 AP 83.00 73884 3 07.00 73885 4 83.00 73886 0 83.00 73887 0A 07.00 73888 0B 98.00 73889 26 07.00 73880 26D 9.00 73890 32 45.00 7388 32D 7.00 69373 P 83.00 69374 AP 83.00 69382 3 07.00 69375 4 83.00 69376 0 83.00 69385 0A 07.00 69377 0B 07.00 69380 26 07.00 69372 26D 9.00 69383 32D 45.00 69384 32 7.00 69388 P 83.00 69389 AP 83.00 69397 3 07.00 69390 4 83.00 6939 0 83.00 69386 0A 07.00 69392 0B 07.00 69395 26 07.00 69387 26D 9.00 69399 32 45.00 69398 32D 7.00 3 48 57 3 24 33 3 24 36 3 24 36 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Heavy Weight Three Knuckle TA386 4 2" x 4" 4.30 mm x 0.60 mm x 4 2" 27 mm x 4.30 mm x 4 2" 27 mm x 4.30 mm (NRP) 69396 32D-NRP 32.00 3 24 37 69403 P 49.00 69404 AP 49.00 6942 3 63.00 69405 4 49.00 69406 0 49.00 6946 0A 63.00 3 24 36 69407 0B 63.00 6940 26 63.00 69402 26D 53.00 6944 32 222.00 6943 32D 78.00 69400 26D-NRP 6.00 6945 32D-NRP 85.00 3 24 36 6948 P 62.00 6949 AP 62.00 69427 3 77.00 69420 4 62.00 6942 0 62.00 6943 0A 77.00 3 24 4 69422 0B 77.00 69425 26 77.00 6947 26D 68.00 69429 32 242.00 69428 32D 94.00 69430 26D-NRP 75.00 74956 32D-NRP 202.00 3 24 4 x 27 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm 69433 P 62.00 69434 AP 62.00 69442 3 77.00 69435 4 62.00 69436 0 62.00 69445 0A 77.00 69437 0B 77.00 69440 26 77.00 69432 26D 68.00 69444 32 242.00 69443 32D 94.00 69448 P 247.00 69449 AP 247.00 69457 3 274.00 69450 4 247.00 6945 0 247.00 69460 0A 274.00 69452 0B 274.00 69455 26 274.00 69447 26D 262.00 69459 32 347.00 69458 32D 279.00 Hospital Tip Heavy Weight Three Knuckle Non-Ferrous Bearings TA386 4 2" x 6" 4.30 mm x 52.40 mm 3 24 45 3 8 74 32D 278.00 3 24 60 Stainless Steel Institutional s HTA386 HTA386 x PSF Packed with 2 " x 2-24 Torx Pin Head Security Machine Screw 8306 32D 24.00 3 24 37 8535 32D 242.00 3 24 40 HTB386 MSP Set Option A includes three hinges with hospital tips. Top and bottom hinges supplied with PSF and SSF, middle hinge is not. $632.00 set Option B - QC8 includes three hinges with hospital tips. Top and bottom hinges supplied with PSF and SSF, middle hinge is provided with QC and no PSF of SSF. $,97.00 QC8 $743.00 QC2 s Effective April 4, 206 FM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Standard Weight Three Knuckle Bearing TA74 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 6978 P 26.00 6979 AP 26.00 6987 3 37.00 6980 4 26.00 698 0 26.00 6990 0A 37.00 6982 0B 37.00 6988 5 26.00 6985 26 37.00 6977 26D 26.00 6993 P 26.00 6994 AP 28.00 69202 3 40.00 6995 4 26.00 6996 0 26.00 699 0A 40.00 6997 0B 40.00 69200 26 40.00 6992 26D 28.00 3 48 3 3 48 42 800-46-3007 www.assaabloy.ca 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm (NRP) 69208 P 36.00 69209 AP 36.00 6927 3 43.00 6920 4 36.00 692 0 36.00 6976 0A 43.00 3 48 5 6922 0B 43.00 6925 26 43.00 69207 26D 36.00 69206 D3 36.00 6922 D4 36.00 7420 26D-NRP 4.00 3 48 5 69223 P 36.00 69224 AP 36.00 69232 3 43.00 69225 4 36.00 69226 0 36.00 69236 0A 43.00 69227 0B 43.00 3 48 55 69228 5 36.00 69230 26 43.00 69222 26D 36.00 69250 D3 36.00 6922 D4 36.00 69235 P-NRP 4.00 74283 26D-NRP 5.00 6925 3-NRP 39.00 3 48 55 74200 0-NRP 52.00 74282 0B-NRP 38.00 FULL MORTISE HINGES Hospital Tip HTA74 Steel Standard Weight Three Knuckle Bearing TA74 69233 26D 55.00 3 48 55 Steel Standard Weight Three Knuckle Bearing Wide Throw TA74 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm 69238 P 53.00 69239 AP 56.00 69247 3 64.00 69240 4 53.00 6924 0 53.00 693 0A 64.00 69242 0B 64.00 69245 26 64.00 69237 26D 56.00 69253 P 53.00 69254 AP 56.00 69262 3 64.00 69255 4 53.00 69256 0 53.00 69326 0A 64.00 69257 0B 64.00 69260 26 63.00 69252 26D 56.00 3 24 32 3 24 34 4 2" x 6" 4.30 mm x 52.4 mm 74356 P 0.00 74357 AP.00 74358 3 9.00 74359 4 0.00 74360 0 0.00 7437 0B 9.00 74372 26 9.00 74373 26D.00 74374 D3.00 74375 D4.00 3 24 39 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-3
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Steel Heavy Weight Three Knuckle Bearing TA786 Steel Heavy Weight Three Knuckle Hospital Tip HTA786 4 2" x 4" 4.30 mm x 0.60 mm -NRP x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm 6" x 6"* 52.40 mm x 52.40 mm 56400 26D 8.00 5640 26D-NRP 23.00 69268 P 09.00 69269 AP 7.00 69277 3 23.00 69270 4 09.00 6927 0 09.00 75282 0A 23.00 69272 0B 23.00 69276 5 7.00 69275 26 23.00 69267 26D 7.00 69280 P-NRP 7.00 6928 0B-NRP 30.00 75240 26D-NRP 23.00 69283 P 7.00 69284 AP 25.00 69292 3 32.00 69285 4 9.00 69286 0 9.00 75283 0A 32.00 69287 0B 32.00 69290 26 32.00 69282 26D 25.00 69298 P 9.00 69299 AP 25.00 69307 3 32.00 69300 4 9.00 6930 0 9.00 75284 0A 32.00 69302 0B 32.00 69305 26 32.00 69297 26D 25.00 753 P 6.00 7532 AP 67.00 7536 3 79.00 7537 4 6.00 7539 0 6.00 75327 0A 79.00 75320 0B 79.00 75323 26 79.00 75324 26D 67.00 * For 6" x 4½" or 6" x use price of 6" x 6" 3 24 37 3 24 37 3 24 37 3 24 39 3 24 42 3 8 62 x 4 2" 27 mm x 4.30 mm s are packed with 2" x 2-24 Torx Pin Head Machine Screws. Steel Swing Clear Heavy Weight 3 Knuckle Bearing Reversible TA795 4 2" 4.30 mm 27 mm 75242 P 33.00 75232 26D 40.00 75244 26D x PSF 48.00 75468 P 262.00 75469 AP 269.00 75470 3 276.00 7547 4 262.00 75472 0 262.00 75473 0A 276.00 75474 0B 276.00 75475 26 276.00 75476 26D 269.00 75368 P 262.00 75369 AP 269.00 75373 3 276.00 75374 4 262.00 75376 0 262.00 75384 0A 276.00 75377 0B 276.00 75380 26 276.00 7538 26D 269.00 3 24 35 75233 26D 35.00 3 24 35 3 24 57 3 24 57 For swing clear heavy weight three knuckle bearing, beveled edge application orderta5795. (s are reversible and non-handed.) s Effective April 4, 206 FM-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Non-Ferrous Standard Weight 5 Knuckle T234 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 58822 P 35.00 59597 3 42.00 58823 4 35.00 59596 0 35.00 58839 0A 42.00 58836 0B 42.00 58826 26 42.00 59595 26D 38.00 58844 32 68.00 58845 32D 54.00 59645 P 38.00 5965 3 45.00 59647 4 38.00 59653 0 38.00 59665 0A 45.00 59646 0B 45.00 59655 26 45.00 59657 26D 4.00 59662 32 76.00 5966 32D 64.00 59736 P 49.00 5899 3 57.00 58920 4 49.00 59730 0 49.00 59740 0A 57.00 59733 0B 57.00 58924 26 57.00 59732 26D 52.00 58875 32 04.00 58876 32D 86.00 2 48 35 3 48 44 3 48 47 800-46-3007 www.assaabloy.ca -NRP x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm Non-Ferrous Standard Weight 5 Knuckle Bearing TA234 3 2" x 3 2" 88.90 mm x 88.90 mm 6020 P 4.00 602 3 5.00 6022 4 4.00 604 0 4.00 606 0A 5.00 605 0B 5.00 596 26 5.00 59630 26D 43.00 609 32 87.00 6026 32D 75.00 3 48 33 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 59785 P 49.00 5979 3 57.00 59787 4 49.00 59789 9 57.00 59793 0 49.00 59803 0A 57.00 58972 0B 57.00 59795 26 57.00 59797 26D 52.00 58963 32 04.00 58964 32D 86.00 59804 0B-NRP 64.00 59784 26D-NRP 57.00 58965 32D-NRP 93.00 58989 P 65.00 58990 3 79.00 5899 4 65.00 59880 0 65.00 58998 0A 79.00 59879 0B 79.00 58995 26 79.00 59882 26D 68.00 59006 32 3.00 59007 32D 09.00 59948 P 65.00 5994 3 79.00 59944 4 65.00 59943 0 65.00 59947 0A 79.00 59946 0B 79.00 59945 26 79.00 59940 26D 68.00 599 32 3.00 5992 32D 03.00 3 48 52 3 48 52 3 24 33 3 24 35 59675 P 52.00 5968 3 60.00 59677 4 52.00 59683 0 52.00 59682 0A 60.00 59680 0B 60.00 3 48 46 59685 26 60.00 59687 26D 53.00 59676 32 06.00 59678 32D 89.00 59750 P 62.00 59754 3 75.00 59759 4 62.00 59745 0 62.00 59753 0A 75.00 59746 0B 75.00 3 48 53 59757 26 75.00 59747 26D 65.00 5975 32 2.00 59752 32D 95.00 Continued on next page FULL MORTISE HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-5
FULL MORTISE HINGES TA234 800-46-3007 www.assaabloy.ca Non-Ferrous Standard Weight 5 Knuckle Bearing Continued 4 2" x 4"-NRP 4.30 mm x 0.60 mm x 4" 27 mm x 0.60 mm 59755 26D-NRP 7.00 59756 32D-NRP 00.00 5974 0B-NRP 66.00 59820 P 63.00 59826 3 75.00 59822 4 62.00 59824 9 75.00 59828 0 62.00 59829 0A 75.00 59839 0B 75.00 59830 26 75.00 59832 26D 65.00 59823 32 2.00 59838 32D 95.00 5982 P-NRP 68.00 59844 3-NRP 82.00 59835 0-NRP 68.00 7600 0B-NRP 82.00 59837 26D-NRP 7.00 59840 32D-NRP 00.00 59989 P 83.00 5999 3 07.00 59992 4 83.00 59993 0 83.00 59994 0A 07.00 59995 0B 07.00 59996 26 07.00 59997 26D 9.00 59998 32 40.00 59999 32D 7.00 3 48 53 3 48 57 3 48 57 3 24 33 x 4 2" 27 mm x 4.30 mm x 4 2"-NRP 27 mm x 4.30 mm x 27 mm x 27 mm 6" x 6" 52.40 mm x 52.40 mm 6003 P 83.00 6004 3 07.00 6005 4 83.00 59900 0 83.00 59907 0A 07.00 59906 0B 07.00 3 24 36 6009 26 07.00 59902 26D 9.00 5990 32 40.00 59904 32D 7.00 59905 26D-NRP 98.00 5990 32D-NRP 22.00 3 24 36 599 0B-NRP 82.00 59965 P 83.00 5997 3 07.00 59967 4 83.00 59973 0 83.00 59972 0A 07.00 59966 0B 07.00 3 24 38 59975 26 07.00 59977 26D 9.00 59983 32 40.00 59984 32D 7.00 672 P 36.00 673 3 77.00 674 4 36.00 667 0 36.00 67 0A 77.00 3 8 43 668 0B 77.00 678 26 77.00 679 26D 50.00 68 32D 35.00 3 8 45 Non-Ferrous Standard Weight 5 Knuckle Concealed Bearing TCA234 68970 P 62.00 68978 3 75.00 68972 4 62.00 68973 0 62.00 68969 0A 75.00 68974 0B 75.00 6898 26 75.00 68976 26D 65.00 68982 32 2.00 68983 32D 95.00 3 48 57 x 27 mm x 27 mm 68990 P 83.00 68998 3 07.00 68992 4 83.00 68993 0 83.00 68989 0A 07.00 68994 0B 07.00 6900 26 07.00 68996 26D 9.00 69002 32 40.00 69003 32D 7.00 3 24 38 s Effective April 4, 206 FM-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Non-Ferrous Standard Weight Five Knuckle Ball Tip TA234BT 800-46-3007 www.assaabloy.ca Non-Ferrous Standard Weight 5 Knuckle Concealed Bearing Non-Ferrous Swing Clear Standard Weight TA2395 FULL MORTISE HINGES 5988 3 97.00 3 48 59 4 2" 4.30 mm 56985 32D 262.00 3 24 40 73585 32D 37.00 27 mm TA4395 3 24 40 73584 32D 37.00 s are NRP and Reversible. Non-Ferrous Standard Weight Five Knuckle Steeple Tip TA234ST Non-Ferrous Standard Weight Five Knuckle Wide Throw TA2398 5986 3 02.00 3 48 59 4 2" x 6" 4.30 mm x 52.40 mm 4 2" x 8" 4.30 mm x 203.20 mm 62624 32D 248.00 62620 26D 27.00 3 24 42 32D 224.00 3 24 45 Steel Standard Weight 5 Knuckle T274 3 2" x 3 2" 5535 P 4.00 88.90 mm x 88.90 mm 55335 AP 7.00 4 2" x 4" 5537 3 22.00 4.30 mm x 0.60 mm 55337 4 4.00 5532 0 4.00 55330 0A 22.00 2 48 3 55333 0B 22.00 5534 5 7.00 55327 26 22.00 4" x 4" 5539 26D 7.00 55485 P 7.00 0.60 mm x 0.60 mm 55505 AP 8.00 5549 3 25.00 3 48 4 55487 4 7.00 4 2" x 4" 55493 0 7.00 4.30 mm x 0.60 mm Continued (NRP) 4" x 4" 0.60 mm x 0.60 mm 555 0A 25.00 55496 0B 25.00 55497 5 8.00 3 48 4 55499 26 25.00 5550 26D 8.00 55635 P 9.00 5564 AP 2.00 55646 3 26.00 55648 4 9.00 55637 0 9.00 55638 0A 26.00 55644 0B 26.00 3 48 50 55656 5 2.00 55655 26 26.00 55639 26D 2.00 55652 D3 26.00 55653 D4 2.00 55645 P-NRP 26.00 55657 26D-NRP 27.00 3 48 50 Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-7
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Steel Standard Weight 5 Knuckle Continued T274 (NRP) 55745 P 9.00 55759 AP 2.00 5577 3 26.00 55767 4 9.00 55769 9 26.00 55774 0 9.00 55762 0A 26.00 55742 0B 26.00 55742E 0BE 22.00 5575 5 23.00 55753 26 26.00 55755 26D 2.00 55782 D3 2.00 55783 D4 2.00 55747 P-NRP 26.00 55754 AP-NRP 27.00 55750 3-NRP 3.00 55768 4-NRP 26.00 55792 0-NRP 26.00 55752 0B-NRP 3.00 55766 26-NRP 3.00 55778 26D-NRP 27.00 3 48 54 3 48 54 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm 55968 P 36.00 55974 AP 36.00 55988 3 4.00 70044 4 36.00 55970 0 36.00 5597 0A 4.00 70046 0B 4.00 55984 5 38.00 70049 26 4.00 55972 26D 38.00 55973 D3 38.00 55982 D4 37.00 56080 P 36.00 56090 AP 37.00 56082 3 4.00 70057 4 36.00 56086 0 36.00 70064 0A 4.00 70059 0B 4.00 70062 26 4.00 56084 26D 38.00 70065 D3 38.00 70066 D4 38.00 3 24 3 3 24 34 Steel Standard Weight 5 Knuckle Bearing TA274 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 55385 P 26.00 55399 AP 26.00 5539 3 37.00 55387 4 26.00 55395 0 26.00 5540 0A 37.00 55389 0B 37.00 55402 26 37.00 55393 26D 37.00 55392 5 26.00 55555 P 26.00 55575 AP 28.00 5556 3 40.00 55557 4 26.00 55563 0 26.00 55554 0A 37.00 55577 0B 40.00 55569 26 40.00 5557 26D 28.00 55567 5 28.00 3 48 3 3 48 42 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm (NRP) 55675 P 36.00 55677 AP 36.00 55683 3 43.00 55674 4 36.00 5568 0 36.00 55673 0A 43.00 5569 0B 43.00 5569E 0BE 37.00 5566 5 4.00 55688 26 43.00 55679 26D 36.00 55587 D3 36.00 55588 D4 36.00 55693 P-NRP 4.00 55690 26D-NRP 4.00 55682 0A-NRP 5.00 55689 0B-NRP 5.00 3 48 5 3 48 5 Continued on next page s Effective April 4, 206 FM-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Standard Weight 5 Knuckle Bearing Continued TA274 800-46-3007 www.assaabloy.ca FULL MORTISE HINGES (NRP) x 4" 27 mm x 0.60 mm 55820 P 4.00 55866 AP 4.00 55846 3 4.00 55842 4 36.00 55844 9 43.00 55848 0 36.00 55847 0A 43.00 55862 0B 43.00 55862E 0BE 7.00 55854 5 4.00 55856 26 43.00 55858 26D 36.00 55809 D3 36.00 5580 D4 36.00 55822 P-NRP 4.00 55868 AP-NRP 4.00 55853 3-NRP 5.00 55834 4-NRP 5.00 5586 9-NRP 5.00 55850 0-NRP 5.00 5585 0A-NRP 5.00 55875 0B-NRP 5.00 55875E 0BE-NRP 23.00 55870 26-NRP 5.00 55860 26D-NRP 4.00 5584 D3-NRP 4.00 5582 D4-NRP 40.00 55963 P 53.00 55995 AP 56.00 55996 3 64.00 55997 4 53.00 55964 0 53.00 55966 26 64.00 55962 26D 56.00 Steel Standard Weight 5 Knuckle Concealed Bearing TCA274 3 48 55 3 48 55 3 24 29 x 4 2" 27 mm x 4.30 mm x 4 2" 27 mm x 4.30 mm (NRP) x 27 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm 5600 P 53.00 56024 AP 56.00 560 3 64.00 5603 4 53.00 5604 0 53.00 56036 0A 64.00 56026 0B 64.00 5608 26 64.00 56020 26D 62.00 5602 P-NRP 58.00 56030 26D-NRP 62.00 5620 P 53.00 5622 P-NRP 58.00 5653 AP 56.00 5639 3 64.00 5635 4 53.00 564 0 53.00 5648 0A 64.00 5655 0B 64.00 5647 26 64.00 5649 26D 56.00 56232 P 96.00 56249 AP 99.00 56239 3 07.00 56240 4 96.00 56243 0 96.00 56252 0A 07.00 56244 0B 07.00 56247 26 07.00 56248 26D 99.00 3 24 32 3 24 34 3 24 34 3 8 55 4 2" x 4" 4.30 mm x 0.60 mm 67200 P 36.00 6720 AP 36.00 67208 3 43.00 67202 4 36.00 67203 0 36.00 6726 0A 43.00 67204 0B 43.00 6720 5 36.00 672 26 43.00 67206 26D 36.00 6723 D3 36.00 6724 D4 36.00 3 48 5 67220 P 36.00 6722 AP 36.00 67228 3 43.00 67222 4 36.00 67223 0 36.00 67235 0A 43.00 67224 0B 43.00 3 48 55 67230 5 45.00 6723 26 43.00 67226 26D 36.00 67233 D3 36.00 67234 D4 36.00 Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-9
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Steel Standard Weight 5 Knuckle Concealed Bearing Continued TCA274 x 4 2" 27 mm x 4.30 mm Steel Standard Weight 5 Knuckle Hospital Tip Bearing HTA274 67240 P 53.00 6724 AP 56.00 67248 3 64.00 67242 4 53.00 67243 0 53.00 67255 0A 64.00 67244 0B 64.00 67245 5 56.00 6725 26 70.00 67246 26D 56.00 67253 D3 56.00 67254 D4 56.00 3 24 32 x 27 mm x 27 mm 67260 P 53.00 6726 AP 56.00 67268 3 64.00 67262 4 53.00 67263 0 53.00 67275 0A 64.00 67264 0B 64.00 67265 5 70.00 6727 26 64.00 67266 26D 56.00 67273 D3 56.00 67274 D4 56.00 5582 P 70.00 55859 26D 77.00 3 24 32 3 48 55 Steel Standard Weight 2 Knuckle Bearing TA273 3 2" x 3 2" 88.90 mm x 88.90 mm R.H. 65450 P 4.00 L.H. 6545 P 4.00 R.H. 65463 AP 4.00 L.H. 65464 AP 4.00 R.H. 65477 3 52.00 L.H. 65478 3 52.00 R.H. 65452 4 4.00 L.H. 65453 4 4.00 R.H. 65454 0 4.00 3 48 3 3 2" x 3 2" 88.90 mm x 88.90 mm L.H. 65455 0 4.00 R.H. 65467 0A 52.00 L.H. 65468 0A 52.00 R.H. 65475 0B 52.00 L.H. 65476 0B 52.00 R.H. 65483 26 52.00 L.H. 65484 26 52.00 R.H. 65458 26D 42.00 L.H. 65459 26D 42.00 R.H. 65487 D3 42.00 L.H. 65488 D3 42.00 R.H. 65489 D4 42.00 L.H. 65490 D4 42.00 3 48 3 Continued on next page s Effective April 4, 206 FM-0 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Standard Weight 2 Knuckle Bearing Continued TA273 800-46-3007 www.assaabloy.ca FULL MORTISE HINGES 4" x 4" 0.60 mm x 0.60 mm R.H. 6553 P 42.00 L.H. 6554 P 42.00 R.H. 6559 AP 42.00 L.H. 65520 AP 42.00 R.H. 65539 3 52.00 L.H. 65546 3 52.00 R.H. 6555 4 42.00 L.H. 6556 4 42.00 R.H. 65525 0 42.00 L.H. 65526 0 42.00 R.H. 65544 0A 52.00 L.H. 65545 0A 52.00 R.H. 65543 0B 52.00 L.H. 65542 0B 52.00 R.H. 6554 26 52.00 L.H. 65540 26 52.00 R.H. 6553 26D 42.00 L.H. 65532 26D 42.00 R.H. 65535 D3 42.00 L.H. 65536 D3 42.00 R.H. 65537 D4 42.00 L.H. 65538 D4 42.00 4 2" x 4" 4.30 mm x 0.60 mm R.H. 6556 P 4.00 L.H. 65562 P 4.00 R.H. 65567 AP 42.00 L.H. 65568 AP 42.00 R.H. 6559 3 52.00 L.H. 65590 3 52.00 R.H. 65563 4 4.00 L.H. 65564 4 4.00 R.H. 65573 0 4.00 L.H. 65574 0 4.00 R.H. 65559 0A 52.00 L.H. 65560 0A 52.00 R.H. 65599 0B 52.00 L.H. 65598 0B 52.00 R.H. 65594 26 52.00 L.H. 65595 26 52.00 R.H. 65579 26D 42.00 L.H. 65580 26D 42.00 R.H. 65585 D3 42.00 L.H. 65586 D3 42.00 R.H. 65587 D4 42.00 L.H. 65588 D4 42.00 3 48 39 3 48 46 R.H. 65605 P 4.00 L.H. 65606 P 4.00 R.H. 656 AP 42.00 L.H. 6562 AP 42.00 R.H. 65632 3 52.00 L.H. 6563 3 52.00 R.H. 65607 4 4.00 L.H. 65608 4 4.00 R.H. 6567 0 4.00 L.H. 6568 0 4.00 R.H. 65640 0A 52.00 L.H. 6564 0A 52.00 R.H. 65636 0B 52.00 L.H. 65635 0B 52.00 R.H. 65634 26 52.00 L.H. 65637 26 52.00 R.H. 65623 26D 42.00 L.H. 65624 26D 42.00 R.H. 65627 D3 42.00 L.H. 65628 D3 42.00 R.H. 65629 D4 42.00 L.H. 65630 D4 42.00 x 4" 27 mm x 0.60 mm R.H. 65653 P 97.00 L.H. 65654 P 97.00 R.H. 65659 AP 02.00 L.H. 65660 AP 02.00 R.H. 65649 3 22.00 L.H. 65650 3 22.00 R.H. 6565 4 02.00 L.H. 65652 4 02.00 R.H. 65665 0 02.00 L.H. 65666 0 02.00 R.H. 65675 0A 22.00 L.H. 65676 0A 22.00 R.H. 65677 0B 22.00 L.H. 65678 0B 22.00 R.H. 65667 26 22.00 L.H. 65668 26 22.00 R.H. 6567 26D 02.00 L.H. 65672 26D 02.00 R.H. 65679 D3 02.00 L.H. 65680 D3 02.00 R.H. 6568 D4 02.00 L.H. 65682 D4 02.00 3 48 49 3 24 26 Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Steel Standard Weight 2 Knuckle Bearing Continued TA273 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm R.H. 6570 P 97.00 L.H. 65702 P 97.00 R.H. 65707 AP 02.00 L.H. 65708 AP 02.00 R.H. 65703 3 22.00 L.H. 65704 3 22.00 R.H. 65705 4 02.00 L.H. 65706 4 02.00 R.H. 6573 0 02.00 L.H. 6574 0 02.00 R.H. 65733 0A 22.00 L.H. 65734 0A 22.00 R.H. 65725 0B 22.00 L.H. 65726 0B 22.00 R.H. 6572 26 22.00 L.H. 65722 26 22.00 R.H. 6579 26D 02.00 L.H. 65720 26D 02.00 R.H. 65729 D3 02.00 L.H. 65730 D3 02.00 R.H. 6573 D4 02.00 L.H. 65732 D4 02.00 3 24 29 R.H. 65749 P 7.00 L.H. 65750 P 7.00 R.H. 65755 AP 2.00 L.H. 65756 AP 2.00 R.H. 65743 3 46.00 L.H. 65744 3 46.00 R.H. 65745 4 2.00 L.H. 65746 4 2.00 R.H. 6576 0 2.00 L.H. 65762 0 2.00 R.H. 6577 0A 46.00 L.H. 65772 0A 46.00 R.H. 65769 0B 46.00 L.H. 65770 0B 46.00 R.H. 65759 26 46.00 L.H. 65760 26 46.00 R.H. 65767 26D 2.00 L.H. 65768 26D 2.00 R.H. 65773 D3 2.00 L.H. 65774 D3 2.00 R.H. 65775 D4 2.00 L.H. 65776 D4 2.00 3 24 32 Steel Standard Weight Wide Throw 5 Knuckle Bearing TA2798 3 2" x 88.90 mm x 27 mm 3 2" x 6" 88.90 mm x 52.4 mm 65294 P 4.00 65305 AP 42.00 65295 3 64.00 65296 4 4.00 65299 0 4.00 65309 0A 64.00 65300 0B 64.00 65303 26 64.00 65304 26D 43.00 65323 P 4.00 65334 AP 42.00 65324 3 64.00 65325 4 4.00 65328 0 4.00 65337 0A 64.00 65329 0B 64.00 65332 26 64.00 65333 26D 43.00 3 24 24 3 24 30 4" x 6" 0.60 mm x 52.4 mm 4" x 7" 0.60 mm x 77.8 mm 4 2" x 6" 4.30 mm x 52.4 mm 65346 P 73.00 65357 AP 76.00 65347 3 07.00 65348 4 73.00 6535 0 73.00 3 24 34 65360 0A 07.00 65352 0B 07.00 65355 26 07.00 65356 26D 77.00 65378 P 73.00 65389 AP 76.00 65379 3 07.00 65380 4 73.00 65383 0 73.00 3 24 36 65392 0A 07.00 65384 0B 07.00 65387 26 07.00 65388 26D 77.00 59046 P 95.00 65404 AP 97.00 65393 3 07.00 65394 4 95.00 59054 0 95.00 3 24 39 65405 0A 07.00 65397 0B 07.00 65400 26 07.00 59052 26D 00.00 Continued on next page s Effective April 4, 206 FM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
4 2" x 7" 0.60 mm x 77.8 mm 4 2" x 8" 4.30 mm x 203.2 mm 800-46-3007 www.assaabloy.ca Steel Standard Weight Wide Throw 5 Knuckle Bearing Continued TA2798 5900 P 95.00 5909 AP 97.00 59098 3 07.00 59099 4 95.00 5903 0 07.00 5906 0A 07.00 5904 0B 07.00 6254 26 07.00 62542 26D 00.00 62548 P 95.00 62559 AP 97.00 62549 3 07.00 62550 4 95.00 62553 0 95.00 62562 0A 95.00 62554 0B 95.00 62557 26 95.00 62558 26D 97.00 3 24 42 3 24 48 x 7" 27 mm x 77.8 mm x 8" 27 mm x 203.2 mm 5957 P 23.00 62583 AP 26.00 62573 3 44.00 62574 4 23.00 62577 0 23.00 62586 0A 22.00 62578 0B 44.00 6258 26 44.00 62582 26D 29.00 62604 P 23.00 6265 AP 26.00 62605 3 44.00 62606 4 23.00 62609 0 23.00 6268 0A 44.00 6260 0B 44.00 6263 26 44.00 6264 26D 29.00 3 24 5 3 24 58 FULL MORTISE HINGES Steel Standard Weight Swing Clear 5 Knuckle Bearing TA2895 4 2" 4.30 mm 57000 P 66.00 5700 AP 73.00 57008 3 206.00 57002 4 66.00 57003 0 66.00 56999 0A 206.00 57004 0B 206.00 570 26 206.00 57006 26D 90.00 3 24 38 TA2895 27 mm TA4895 27 mm 57030 26D 44.00 3 24 40 57049 26D 44.00 3 24 40 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-3
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Non-Ferrous Standard Weight 2 Knuckle Bearing TA333 3 2" x 3 2" 88.90 mm x 88.90 mm R.H. 66239 P 207.00 L.H. 66240 P 207.00 R.H. 66245 AP 207.00 L.H. 66246 AP 207.00 R.H. 6627 3 255.00 L.H. 6628 3 255.00 R.H. 6629 4 207.00 L.H. 66220 4 207.00 R.H. 6624 0 207.00 L.H. 66242 0 207.00 R.H. 66237 0A 255.00 L.H. 66238 0A 255.00 R.H. 66247 0B 255.00 L.H. 66248 0B 255.00 R.H. 66227 26 255.00 L.H. 66228 26 255.00 R.H. 66243 26D 227.00 L.H. 66244 26D 227.00 4" x 4" 0.60 mm x 0.60 mm R.H. 66258 P 220.00 L.H. 66259 P 220.00 R.H. 66260 AP 220.00 L.H. 6626 AP 220.00 R.H. 6605 3 276.00 L.H. 6606 3 276.00 R.H. 70286 4 220.00 L.H. 70287 4 220.00 R.H. 66085 0 220.00 L.H. 66086 0 220.00 R.H. 66264 0A 276.00 L.H. 66265 0A 276.00 R.H. 66262 0B 276.00 L.H. 66263 0B 276.00 R.H. 6609 26 276.00 L.H. 66092 26 276.00 R.H. 66097 26D 245.00 L.H. 66098 26D 245.00 4 2" x 4" 4.30 mm x 0.60 mm R.H. 66287 P 232.00 L.H. 66288 P 232.00 R.H. 66289 AP 232.00 L.H. 66290 AP 232.00 R.H. 6635 3 297.00 L.H. 6636 3 297.00 R.H. 6639 4 232.00 L.H. 66320 4 232.00 R.H. 66295 0 232.00 L.H. 66296 0 232.00 R.H. 66285 0A 297.00 L.H. 66286 0A 297.00 R.H. 6629 0B 297.00 L.H. 66292 0B 297.00 3 48 33 3 48 46 3 48 53 Continued 4 2" x 4" 4.30 mm x 0.60 mm R.H. 6630 26 297.00 L.H. 66302 26 297.00 R.H. 66307 26D 297.00 L.H. 66308 26D 297.00 R.H. 66293 32 359.00 L.H. 66294 32 359.00 R.H. 66297 32D 346.00 L.H. 66298 32D 346.00 R.H. 66369 P 232.00 L.H. 66370 P 232.00 R.H. 66355 AP 232.00 L.H. 66356 AP 232.00 R.H. 66353 3 297.00 L.H. 66354 3 297.00 R.H. 66357 4 232.00 L.H. 66358 4 232.00 R.H. 66337 0 232.00 L.H. 66338 0 232.00 R.H. 66367 0A 297.00 L.H. 66368 0A 297.00 R.H. 6637 0B 297.00 L.H. 66372 0B 297.00 R.H. 66343 26 297.00 L.H. 66344 26 297.00 R.H. 66349 26D 297.00 L.H. 66350 26D 297.00 R.H. 66333 32 359.00 L.H. 66334 32 359.00 R.H. 66335 32D 346.00 L.H. 66336 32D 346.00 x 4" 27 mm x 0.60 mm R.H. 66407 P 289.00 L.H. 66408 P 289.00 R.H. 66409 AP 289.00 L.H. 6640 AP 289.00 R.H. 6647 3 363.00 L.H. 6648 3 363.00 R.H. 6649 4 289.00 L.H. 66420 4 289.00 R.H. 66379 0 289.00 L.H. 66380 0 289.00 R.H. 66405 0A 363.00 L.H. 66406 0A 363.00 R.H. 664 0B 363.00 L.H. 6642 0B 363.00 R.H. 66385 26 363.00 L.H. 66386 26 363.00 R.H. 6639 26D 38.00 L.H. 66392 26D 38.00 R.H. 6638 32 424.00 L.H. 66382 32 424.00 R.H. 66383 32D 424.00 L.H. 66384 32D 424.00 3 48 53 3 48 57 3 24 33 Continued on next page s Effective April 4, 206 FM-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
800-46-3007 www.assaabloy.ca Non-Ferrous Standard Weight 2 Knuckle Bearing Continued TA333 FULL MORTISE HINGES x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm R.H. 66455 P 289.00 L.H. 66456 P 289.00 R.H. 66457 AP 289.00 L.H. 66458 AP 289.00 R.H. 6644 3 363.00 L.H. 66442 3 363.00 R.H. 66443 4 289.00 L.H. 66444 4 289.00 R.H. 6642 0 289.00 L.H. 66422 0 289.00 R.H. 66453 0A 363.00 L.H. 66454 0A 363.00 R.H. 66459 0B 363.00 L.H. 66460 0B 363.00 R.H. 66427 26 363.00 L.H. 66428 26 363.00 R.H. 66433 26D 363.00 L.H. 66434 26D 363.00 R.H. 66423 32 424.00 L.H. 66424 32 424.00 R.H. 66425 32D 424.00 L.H. 66426 32D 424.00 3 24 36 R.H. 6649 P 289.00 L.H. 66492 P 289.00 R.H. 66493 AP 289.00 L.H. 66494 AP 289.00 R.H. 66499 3 363.00 L.H. 66500 3 363.00 R.H. 66489 4 289.00 L.H. 66490 4 289.00 R.H. 66463 0 289.00 L.H. 66464 0 289.00 R.H. 66487 0A 363.00 L.H. 66488 0A 363.00 R.H. 66495 0B 363.00 L.H. 66496 0B 363.00 R.H. 66469 26 363.00 L.H. 66470 26 363.00 R.H. 66475 26D 38.00 L.H. 66476 26D 38.00 R.H. 66465 32 424.00 L.H. 66466 32 424.00 R.H. 66467 32D 424.00 L.H. 66468 32D 424.00 3 24 38 Non-Ferrous Heavy Weight 2 Knuckle Bearing TA3350 R.H. 66627 P 376.00 L.H. 66628 P 376.00 R.H. 66649 AP 376.00 L.H. 66650 AP 376.00 R.H. 66749 3 459.00 L.H. 66750 3 459.00 R.H. 6675 4 376.00 L.H. 66752 4 376.00 R.H. 6663 0 376.00 L.H. 66632 0 376.00 R.H. 6665 0A 459.00 3 24 37 L.H. 66652 0A 459.00 R.H. 66629 0B 459.00 L.H. 66630 0B 459.00 R.H. 66637 26 459.00 L.H. 66638 26 459.00 R.H. 66643 26D 405.00 L.H. 66644 26D 405.00 R.H. 66633 32 536.00 L.H. 66634 32 536.00 R.H. 66639 32D 536.00 L.H. 66640 32D 536.00 3 24 37 Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-5
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Non-Ferrous Heavy Weight 2 Knuckle Bearing Continued TA3350 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm R.H. 66709 P 43.00 L.H. 6670 P 43.00 R.H. 66679 AP 43.00 L.H. 66680 AP 43.00 R.H. 66737 3 58.00 L.H. 66738 3 58.00 R.H. 66739 4 43.00 L.H. 66740 4 43.00 R.H. 6666 0 43.00 L.H. 66662 0 43.00 R.H. 6673 0A 58.00 L.H. 6674 0A 58.00 R.H. 667 0B 58.00 L.H. 6672 0B 58.00 R.H. 66667 26 58.00 L.H. 66668 26 58.00 R.H. 66673 26D 458.00 L.H. 66674 26D 458.00 R.H. 66663 32 606.00 L.H. 66664 32 606.00 R.H. 66669 32D 606.00 L.H. 66670 32D 606.00 3 24 4 R.H. 66757 P 43.00 L.H. 66758 P 43.00 R.H. 66759 AP 43.00 L.H. 66760 AP 43.00 R.H. 66725 3 58.00 L.H. 66726 3 58.00 R.H. 66727 4 43.00 L.H. 66728 4 43.00 R.H. 6669 0 43.00 L.H. 66692 0 43.00 R.H. 66689 0A 58.00 L.H. 66690 0A 58.00 R.H. 6676 0B 58.00 L.H. 66762 0B 58.00 R.H. 66697 26 58.00 L.H. 66698 26 58.00 R.H. 66703 26D 458.00 L.H. 66704 26D 458.00 R.H. 66693 32 606.00 L.H. 66694 32 606.00 R.H. 66695 32D 606.00 L.H. 66696 32D 606.00 3 24 45 Non-Ferrous Heavy Weight 5 Knuckle Bearing T4A3386 (NRP) 680 P 49.00 6794 3 63.00 6790 4 49.00 6796 0 49.00 6793 0A 63.00 6795 0B 63.00 6802 26 63.00 6804 26D 53.00 679 32 222.00 6787 32D 78.00 683 0-NRP 56.00 685 0B-NRP 7.00 682 26D-NRP 6.00 684 32D-NRP 85.00 3 24 37 3 24 37 x 4 2" 27 mm x 4.30 mm x 4 2" 27 mm x 4.30 mm (NRP) 6879 P 62.00 7092 3 77.00 7093 4 62.00 6862 0 62.00 6874 0A 77.00 6873 0B 77.00 6870 26 77.00 6866 26D 68.00 6865 32 68.00 6868 32D 94.00 6863 0-NRP 59.00 686 0B-NRP 85.00 6869 26D-NRP 75.00 687 32D-NRP 202.00 3 24 43 3 24 43 Continued on next page s Effective April 4, 206 FM-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Non-Ferrous Heavy Weight 5 Knuckle Bearing Continued T4A3386 800-46-3007 www.assaabloy.ca FULL MORTISE HINGES x 27 mm x 27 mm 6938 P 62.00 6933 3 77.00 6929 4 62.00 6935 0 62.00 6924 0A 77.00 6930 0B 77.00 694 26 77.00 6943 26D 68.00 6926 32 242.00 6928 32D 94.00 3 24 47 6" x 52.4 mm x 27 mm 68832 P 247.00 68833 3 274.00 68834 4 247.00 68827 0 247.00 6884 0A 274.00 68828 0B 274.00 68838 26 274.00 68839 26D 262.00 68823 32 347.00 68824 32D 279.00 3 8 43 Non-Ferrous Heavy Weight 5 Knuckle Bearing T4B3386 TCA3386 6" x 6" 52.4 mm x 52.4 mm T6B3386 8" x 8" 203.2 mm x 203.2 mm 6462 P 247.00 6463 3 274.00 6464 4 247.00 64602 0 247.00 64620 0A 274.00 64607 0B 274.00 6467 26 274.00 6468 26D 262.00 64603 32 347.00 64604 32D 279.00 69060 32D 350.00 6906 32 36.00 3 8 74 3 2 66 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm Wide throw not available in TCA Series 6836 P 49.00 6838 3 63.00 6834 4 49.00 6839 0 49.00 6840 0A 63.00 684 0B 63.00 6842 26 63.00 6832 26D 53.00 6843 32 222.00 6833 32D 78.00 6856 P 62.00 6858 3 77.00 6854 4 62.00 6859 0 62.00 6860 0A 77.00 686 0B 77.00 6862 26 77.00 6852 26D 68.00 6863 32 23.00 6853 32D 94.00 687 P 62.00 6873 3 77.00 6869 4 62.00 6874 0 62.00 6875 0A 77.00 6876 0B 77.00 6877 26 77.00 6867 26D 68.00 6878 32 256.00 6868 32D 94.00 3 24 37 3 24 43 3 24 47 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-7
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Non-Ferrous Heavy Weight 5 Knuckle Bearing T4A3386 4 2" x 4.30 mm x 27 mm 4 2" x 6" 4.30 mm x 52.4 mm 4 2" x 7" 0.60 mm x 77.8 mm 4 2" x 8" 4.30 mm x 203.2 mm 7097 P 280.00 70973 3 345.00 70974 4 280.00 70975 0 280.00 70976 0A 345.00 70977 0B 345.00 70978 26 345.00 70970 26D 294.00 70979 32 38.00 70990 32D 363.00 7052 P 284.00 7054 3 354.00 7055 4 284.00 7056 0 284.00 7057 0A 354.00 7058 0B 354.00 7059 26 354.00 7050 26D 32.00 7060 32 394.00 705 32D 388.00 7000 P 283.00 700 3 362.00 7002 4 283.00 700 0 283.00 707 0A 362.00 70 0B 362.00 7006 26 362.00 7007 26D 320.00 705 32 40.00 706 32D 40.00 7087 P 34.00 7089 3 376.00 7090 4 34.00 709 0 34.00 7092 0A 376.00 7093 0B 376.00 7094 26 376.00 7085 26D 322.00 7095 32 43.00 7086 32D 402.00 3 24 60 3 24 60 3 24 60 3 24 60 x 6" 27 mm x 52.4 mm x 7" 27 mm x 77.8 mm x 8" 27 mm x 203.2 mm 70896 P 34.00 70898 3 388.00 70899 4 34.00 7065 0 34.00 7066 0A 388.00 7067 0B 388.00 7068 26 388.00 70892 26D 333.00 7069 32 43.00 70893 32D 422.00 70902 P 34.00 70904 3 40.00 70905 4 34.00 70906 0 34.00 70907 0A 40.00 70908 0B 40.00 70909 26 342.00 70900 26D 342.00 7090 32 442.00 7090 32D 435.00 70952 P 337.00 70954 3 49.00 70955 4 337.00 70956 0 337.00 70957 0A 49.00 70958 0B 49.00 70959 26 49.00 70950 26D 350.00 70949 32 454.00 7095 32D 447.00 3 24 70 3 24 70 3 24 70 Heavy Weight Stainless Steel Swing Clear T4A3395 s are NRP 4 2" 4.30 mm 27 mm 5595 32D 27.00 3 24 59 5596 32D 27.00 3 24 59 s Effective April 4, 206 FM-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Heavy Weight 2 Knuckle Bearing TA3750 x 4 2" 27 mm x 4.30 mm R.H. 66523 P 225.00 L.H. 66524 P 225.00 R.H. 66528 AP 264.00 L.H. 66527 AP 264.00 R.H. 6653 3 320.00 L.H. 6654 3 320.00 R.H. 6655 4 264.00 L.H. 6656 4 264.00 R.H. 66505 0 264.00 L.H. 66506 0 264.00 R.H. 66533 0A 320.00 L.H. 66534 0A 320.00 R.H. 66532 0B 320.00 L.H. 6653 0B 320.00 R.H. 665 26 320.00 L.H. 6652 26 320.00 R.H. 6657 26D 248.00 L.H. 6658 26D 248.00 3 24 37 R.H. 66565 P 285.00 L.H. 66566 P 285.00 R.H. 66569 AP 328.00 L.H. 66570 AP 328.00 R.H. 6656 3 373.00 3 24 39 L.H. 66562 3 373.00 R.H. 66563 4 30.00 L.H. 66564 4 30.00 R.H. 66547 0 30.00 Continued on next column 800-46-3007 www.assaabloy.ca Continued x 4 2" 27 mm x 4.30 mm L.H. 66548 0 30.00 R.H. 6657 0A 373.00 L.H. 66572 0A 373.00 R.H. 6658 0B 373.00 L.H. 66582 0B 373.00 R.H. 66553 26 373.00 L.H. 66554 26 373.00 R.H. 66559 26D 284.00 L.H. 66560 26D 284.00 x 27 mm x 27 mm R.H. 66607 P 285.00 L.H. 66608 P 285.00 R.H. 66623 AP 328.00 L.H. 66624 AP 328.00 R.H. 66603 3 373.00 L.H. 66604 3 373.00 R.H. 66605 4 30.00 L.H. 66606 4 30.00 R.H. 66589 0 30.00 L.H. 66590 0 30.00 R.H. 6665 0A 373.00 L.H. 6666 0A 373.00 R.H. 66625 0B 373.00 L.H. 66626 0B 373.00 R.H. 66595 26 373.00 L.H. 66596 26 373.00 R.H. 6660 26D 284.00 L.H. 66602 26D 284.00 3 24 39 3 24 42 FULL MORTISE HINGES Steel Heavy Weight 5 Knuckle Bearing T4A3786 s Effective April 4, 206 58375 P 09.00 58382 AP 7.00 58343 3 23.00 58344 4 09.00 58345 9 23.00 58379 0 09.00 58367 0A 23.00 58346 0B 23.00 58346E 0BE 05.00 58373 5 7.00 58377 26 23.00 58384 26D 7.00 3 24 35 (NRP) x 4 2" 27 mm x 4.30 mm x 4 2" 27 mm x 4.30 mm (NRP) 58387 P-NRP 7.00 58386 0-NRP 7.00 58388 26D-NRP 23.00 58440 P 9.00 58447 AP 25.00 58444 3 32.00 58446 4 9.00 58445 0 9.00 58453 0A 32.00 58464 0B 32.00 7285 5 25.00 58467 26 32.00 58443 26D 25.00 58442 P-NRP 26.00 58449 26D-NRP 3.00 3 24 35 3 24 4 3 24 4 Continued on next page Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-9
FULL MORTISE HINGES T4A3786 800-46-3007 www.assaabloy.ca Steel Heavy Weight 5 Knuckle Bearing Continued x 27 mm x 27 mm 58520 P 9.00 58526 AP 25.00 58530 3 32.00 58527 4 9.00 58524 0 9.00 5859 0A 32.00 58532 0B 32.00 58538 26 32.00 58522 26D 25.00 3 24 55 6" x 52.4 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm 72783 P 6.00 72784 AP 57.00 72788 3 79.00 72789 4 6.00 7279 0 6.00 72799 0A 79.00 72792 0B 79.00 72795 26 79.00 72796 26D 67.00 58585 P 6.00 58580 AP 57.00 58596 3 79.00 58597 4 6.00 58588 0 6.00 58594 0A 79.00 5860 0B 79.00 58583 26 79.00 58586 26D 67.00 3 8 42 3 8 62 Steel Heavy Weight Wide Throw 5 Knuckle Bearing T4A3786 4 2" x 4.30 mm x 27 mm 4 2" x 6" 4.30 mm x 52.4 mm 4 2" x 7" 0.60 mm x 77.8 mm 7270 P 206.00 72702 AP 22.00 72703 3 28.00 72704 4 206.00 72705 0 206.00 72706 0A 28.00 72707 0B 28.00 72708 26 28.00 72700 26D 22.00 72729 P 206.00 72730 AP 22.00 7273 3 28.00 72732 4 206.00 72733 0 206.00 72734 0A 28.00 72735 0B 28.00 72736 26 28.00 72728 26D 22.00 72755 P 206.00 72756 AP 22.00 72757 3 28.00 72758 4 206.00 72759 0 206.00 72760 0A 28.00 7276 0B 28.00 72762 26 28.00 72754 26D 22.00 3 24 55 3 24 55 3 24 55 4 2" x 8" 0.60 mm x 203.2 mm x 6" 27 mm x 52.4 mm x 7" 27 mm x 77.8 mm x 8" 27 mm x 203.2 mm 7280 P 206.00 72802 AP 22.00 72803 3 28.00 72804 4 206.00 72805 0 206.00 72806 0A 28.00 72807 0B 28.00 72808 26 28.00 72800 26D 22.00 7285 P 24.00 72852 AP 220.00 72859 3 227.00 72853 4 24.00 72854 0 24.00 72863 0A 227.00 72855 0B 227.00 72862 26 227.00 72857 26D 220.00 7290 P 24.00 72902 AP 220.00 72909 3 227.00 72903 4 24.00 72904 0 24.00 7293 0A 220.00 72905 0B 220.00 7292 26 220.00 72907 26D 220.00 7295 P 24.00 72952 AP 220.00 72959 3 227.00 72953 4 24.00 72954 0 24.00 72963 0A 227.00 72955 0B 227.00 72962 26 227.00 72957 26D 220.00 3 24 55 3 24 64 3 24 64 3 24 64 s Effective April 4, 206 FM-20 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Heavy Weight 6-Bearing T6A3786 800-46-3007 www.assaabloy.ca Steel Heavy Weight Swing Clear 5 Knuckle Bearing T4A3795 FULL MORTISE HINGES 8" x 6" 203.2 mm x 52.4 mm Steel Heavy Weight 5 Knuckle Concealed Bearing TCA3786 58629 P 356.00 58630 AP 362.00 58634 3 382.00 58635 4 356.00 58637 0 356.00 58645 0A 382.00 58638 0B 382.00 5864 26 382.00 58642 26D 374.00 3 2 49 4 2" 4.30 mm 27 mm 73456 P 238.00 73459 AP 24.00 73460 3 245.00 7346 4 238.00 73462 0 238.00 73465 0A 245.00 73466 0B 245.00 73467 26 245.00 73463 26D 24.00 73469 P 262.00 73470 AP 269.00 73474 3 276.00 73475 4 262.00 73477 0 262.00 73485 0A 276.00 73478 0B 276.00 7348 26 276.00 73482 26D 262.00 3 24 47 3 24 47 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm 67320 P 09.00 6732 AP 7.00 67328 3 23.00 67322 4 09.00 67323 0 09.00 67333 0A 23.00 67324 0B 23.00 6733 26 23.00 67326 26D 7.00 67340 P 7.00 6734 AP 25.00 67348 3 32.00 67342 4 7.00 67343 0 7.00 67353 0A 32.00 67344 0B 32.00 6735 26 32.00 67346 26D 25.00 67360 P 9.00 6736 AP 25.00 67368 3 32.00 67362 4 9.00 67363 0 9.00 67359 0A 32.00 67364 0B 32.00 6737 26 32.00 67366 26D 9.00 3 24 35 3 24 4 3 24 43 Steel Swing Clear Heavy Weight Beveled Edge Bearing T4A4795 4 2" 4.30 mm 27 mm 73442 P 238.00 73443 AP 24.00 73444 3 245.00 73445 4 238.00 73446 0 238.00 73447 0A 245.00 73448 0B 245.00 73449 26 245.00 7345 26D 24.00 7359 P 262.00 73593 AP 269.00 73594 3 276.00 73595 4 262.00 73596 0 262.00 73597 0A 276.00 73598 0B 276.00 73599 26 276.00 73590 26D 269.00 s are NRP, reversible and non-handed. 3 24 57 3 24 57 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-2
FULL MORTISE HINGES 800-46-3007 www.assaabloy.ca Steel Standard Weight Swing Clear 5 Knuckle Bearing For Beveled Edge Doors TA4895 4 2" 4.30 mm 57040 P 66.00 57048 AP 65.00 57044 3 90.00 57042 4 66.00 57043 0 66.00 57047 0A 90.00 57046 0B 90.00 57045 26 90.00 5704 26D 75.00 s are NRP, reversible and non-handed. 3 24 38 MacPro s Steel Standard Weight 5 Knuckle MP79 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm MacPro Steel Standard Weight Five Knuckle Bearing MPB79 76334 P 8.00 7630 3 2.00 7634 4 8.00 76322 0B 2.00 76387 5.00 76326 26 2.00 76330 26D.00 76335 P NRP 0.00 763 3 NRP 4.00 7635 4 NRP 0.00 76323 0B NRP 4.00 76327 26 NRP 4.00 7633 26D NRP 2.00 3 48 50 3 48 50 76368 P 8.00 76344 3 3.00 76348 4 9.00 76356 0B 2.00 76364E 0BE 8.00 76384 5.00 76360 26 2.00 76364 26D.00 76369 P NRP 0.00 76345 3 NRP 5.00 76349 4 NRP 0.00 76357 0B NRP 5.00 7636 26 NRP 5.00 76365 26D NRP 3.00 These hinges are not subject to any other discounts 3 48 54 3 48 54 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 76366 P 3.00 76342 3 7.00 76346 4 5.00 76354 0B 7.00 76386 5 5.00 76358 26 7.00 76362 26D 5.00 76367 P NRP 5.00 76343 3 NRP 9.00 76347 4 NRP 7.00 76355 0B NRP 9.00 76359 26 NRP 9.00 76363 26D NRP 7.00 3 48 5 3 48 5 76336 P 3.00 7632 3 7.00 7636 4 5.00 76320 0 9.00 76324 0B 7.00 76324E 0BE 6.00 76383 5 5.00 76328 26 7.00 76332 26D 5.00 76337 P NRP 5.00 7633 3 NRP 9.00 7637 4 NRP 7.00 76325 0B NRP 9.00 76325E 0BE NRP 8.00 76329 26 NRP 9.00 76333 26D NRP 7.00 7632 0 NRP 20.00 3 48 55 3 48 55 s Effective April 4, 206 FM-22 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
MacPro Steel Heavy Weight Five Knuckle Bearing MPB68 x 4 2" 27 mm x 4.30 mm 76374 26D 37.00 76375 26D NRP 39.00 76395 5 37.00 76390 26D 37.00 7639 26D NRP 42.00 3 24 35 3 24 39 800-46-3007 www.assaabloy.ca MacPro Non-Ferrous Heavy Weight Five Knuckle Bearing MPB99 x 4 2" 27 mm x 4.30 mm 76376 32D 77.00 76377 32D NRP 80.00 76392 32D 8.00 76393 32D NRP 83.00 3 24 37 3 24 4 FULL MORTISE HINGES MacPro Non-Ferrous Standard Weight Five Knuckle Bearing MPB9 76340 32D 45.00 3 48 33 7634 32D NRP 49.00 These hinges are not subject to any other discounts s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-23
ELECTRIC HINGES Electric s CC-4 TA234 - CC4 4 2" x 4" 4.30 mm x 0.60 mm TA274 - CC4 4 2" x 4" 4.30 mm x 0.60 mm T4A3386 - CC4 x 4 2" 27 mm x 4.30 mm 800-46-3007 www.assaabloy.ca 728 3 58.00 729 4 50.00 7220 0B 58.00 722 26 58.00 7222 26D 5.00 779 32D 548.00 7223 3 532.00 5987 4 59.00 739 0B 537.00 7224 26 537.00 742 26D 524.00 5683 32D 553.00 55664 P 494.00 7225 AP 494.00 7226 3 502.00 7227 4 494.00 7257 0 494.00 7228 0A 502.00 55668 0B 502.00 55666 26 502.00 55669 26D 494.00 7230 D3 494.00 723 D4 494.00 55888 P 499.00 7250 AP 499.00 728 3 499.00 55902 4 494.00 70 0 494.00 7252 0A 494.00 55886 0B 502.00 55887 26 502.00 55885 26D 494.00 7254 D3 494.00 7255 D4 494.00 7260 3 62.00 726 4 607.00 7262 0B 62.00 7263 26 62.00 706 26D 6.00 767 32D 637.00 7265 26D 626.00 720 32D 652.00 T4A3786 - CC4 x 4 2" 27 mm x 4.30 mm Electric s CC-6 TA234 - CC6 4 2" x 4" 4.30 mm x 0.60 mm TA274 - CC6 4 2" x 4" 4.30 mm x 0.60 mm 7280 P 577.00 736 26D 583.00 7285 3 666.00 7286 4 653.00 7287 0B 666.00 7288 26 666.00 7289 26D 657.00 763 32D 687.00 7292 3 666.00 7293 4 653.00 7294 0B 666.00 7295 26 666.00 7296 26D 657.00 759 32D 687.00 7300 P 627.00 730 AP 627.00 7302 3 635.00 7303 4 627.00 7304 0 627.00 7305 0A 635.00 7306 0B 635.00 7307 26 635.00 7308 26D 627.00 730 D3 627.00 73 D4 627.00 7205 P 633.00 734 AP 633.00 7200 3 633.00 720 4 627.00 7202 0 627.00 733 0A 635.00 7203 0B 635.00 7204 26 635.00 720 26D 627.00 736 D3 627.00 737 D4 627.00 T4A3786 - CC4 7378 P 567.00 7269 AP 575.00 7270 3 58.00 727 4 567.00 7272 0 567.00 7273 0A 58.00 7274 0B 58.00 7275 26 58.00 78 26D 575.00 7277 D3 575.00 7278 D4 575.00 s Effective April 4, 206 EH- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Electric s CC-6 T4A3386 - CC6 x 4 2" 27 mm x 4.30 mm T4A3786 - CC6 x 4 2" 27 mm x 4.30 mm Electric s CC-8 TA234 - CC8 4 2" x 4" 4.30 mm x 0.60 mm 7320 3 755.00 732 4 74.00 7322 0B 755.00 7323 26 755.00 774 26D 744.00 7208 32D 770.00 7326 26D 760.00 72 32D 786.00 7330 P 70.00 733 AP 708.00 7332 3 75.00 7333 4 70.00 7334 0 70.00 7335 0A 75.00 7336 0B 75.00 7337 26 75.00 773 26D 708.00 7339 D3 708.00 7340 D4 708.00 7342 P 7.00 7343 26D 77.00 7450 3 79.00 745 4 779.00 7452 0B 79.00 7453 26 79.00 7454 26D 782.00 765 32D 8.00 7456 3 79.00 7457 4 779.00 7458 0B 79.00 7459 26 79.00 5684 26D 782.00 76 32D 8.00 800-46-3007 www.assaabloy.ca Electric s CC-8 TA274 - CC8 4 2" x 4" 4.30 mm x 0.60 mm T4A3386 - CC8 x 4 2" 27 mm x 4.30 mm T4A3786 - CC8 x 4 2" 27 mm x 4.30 mm 746 P 753.00 7462 AP 753.00 7463 3 760.00 7464 4 753.00 7465 0 753.00 7466 0A 760.00 7467 0B 760.00 7468 26 760.00 7469 26D 753.00 747 D3 753.00 7472 D4 753.00 55906 P 758.00 7474 AP 758.00 7475 3 758.00 7476 4 753.00 7477 0 753.00 7478 0A 760.00 7479 0B 760.00 7480 26 760.00 55904 26D 753.00 7482 D3 753.00 7483 D4 753.00 7485 3 879.00 7486 4 866.00 7487 0B 879.00 7488 26 879.00 768 26D 870.00 769 32D 895.00 7490 26D 885.00 722 32D 92.00 7492 P 826.00 7493 AP 833.00 7494 3 839.00 7495 4 826.00 7496 0 826.00 7497 0A 839.00 7498 0B 839.00 7499 26 839.00 766 26D 833.00 7506 D3 833.00 7507 D4 833.00 7508 26D 380.00 ELECTRIC HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-2
ELECTRIC HINGES Electric s QC-2 TA234 - QC2 4 2" x 4" 4.30 mm x 0.60 mm TA274 - QC2 4 2" x 4" 4.30 mm x 0.60 mm T4A3386 - QC2 x 4 2" 27 mm x 4.30 mm T4A3786 - QC2 800-46-3007 www.assaabloy.ca 7300 3 408.00 730 4 396.00 7302 0B 408.00 7303 26 408.00 7304 26D 400.00 7305 32D 429.00 7306 3 408.00 7307 4 396.00 7308 0B 408.00 7309 26 396.00 730 26D 400.00 73 32D 429.00 732 P 370.00 733 AP 370.00 734 3 378.00 735 4 370.00 736 0 370.00 737 0A 378.00 738 0B 378.00 739 26 378.00 7320 26D 370.00 7322 D3 370.00 7323 D4 370.00 7324 P 376.00 7325 AP 376.00 7326 3 376.00 7327 4 370.00 7328 0 370.00 7329 0A 378.00 7330 0B 378.00 733 26 378.00 7332 26D 370.00 7334 D3 370.00 7335 D4 370.00 7336 3 497.00 7337 4 484.00 7338 0B 497.00 7339 26 497.00 7340 26D 488.00 734 32D 53.00 7342 26D 503.00 7343 32D 529.00 7344 P 444.00 7345 AP 450.00 7346 3 458.00 7347 4 444.00 7348 0 444.00 7349 0A 458.00 7350 0B 458.00 735 26 458.00 7352 26D 450.00 7354 D3 450.00 7355 D4 450.00 Electric s QC-2 T4A3786 - QC2 x 4 2" 27 mm x 4.30 mm Electric s QC-4 TA234 - QC4 4 2" x 4" 4.30 mm x 0.60 mm TA274 - QC4 4 2" x 4" 4.30 mm x 0.60 mm 7356 P 453.00 7357 26D 460.00 7360 3 546.00 736 4 534.00 7362 0B 546.00 7363 26 546.00 7364 26D 537.00 7365 32D 566.00 7366 3 546.00 7367 4 534.00 7368 0B 546.00 7369 26 546.00 7370 26D 537.00 737 32D 566.00 7372 P 508.00 7373 AP 508.00 7374 3 55.00 7375 4 508.00 7376 0 508.00 7377 0A 55.00 7378 0B 55.00 7379 26 55.00 7380 26D 508.00 7382 D3 508.00 7383 D4 508.00 7384 P 53.00 7385 AP 53.00 7386 3 53.00 7387 4 508.00 7388 0 508.00 7389 0A 55.00 7390 0B 55.00 739 26 55.00 7392 26D 508.00 7394 D3 508.00 7395 D4 508.00 s Effective April 4, 206 EH-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Electric s QC-4 T4A3386 - QC4 x 4 2" 27 mm x 4.30 mm T4A3786 - QC4 x 4 2" 27 mm x 4.30 mm 73200 3 634.00 7320 4 62.00 73202 0B 634.00 73203 26 634.00 73204 26D 625.00 73205 32D 650.00 73206 26D 625.00 73207 32D 650.00 73208 P 58.00 73209 AP 588.00 7320 3 595.00 732 4 58.00 7322 0 58.00 7323 0A 595.00 7324 0B 595.00 7325 26 595.00 7326 26D 588.00 7328 D3 329.00 7329 D4 329.00 73220 P 590.00 7322 26D 597.00 Electric s QC-6 TA234 - QC6 4 2" x 4" 4.30 mm x 0.60 mm 73222 3 679.00 73223 4 667.00 73224 0B 679.00 73225 26 679.00 73226 26D 67.00 73227 32D 700.00 73228 3 679.00 73229 4 667.00 73230 0B 679.00 7323 26 679.00 73232 26D 67.00 73233 32D 700.00 800-46-3007 www.assaabloy.ca Electric s QC-6 TA274 - QC6 4 2" x 4" 4.30 mm x 0.60 mm T4A3386 - QC6 x 4 2" 27 mm x 4.30 mm T4A3786 - QC6 x 4 2" 27 mm x 4.30 mm 73234 P 642.00 73235 AP 642.00 73236 3 649.00 73237 4 642.00 73238 0 642.00 73239 0A 649.00 73240 0B 649.00 7324 26 649.00 73242 26D 642.00 73244 D3 642.00 73245 D4 642.00 73246 P 647.00 73247 AP 647.00 73248 3 647.00 73249 4 642.00 73250 0 642.00 7325 0A 649.00 73252 0B 649.00 73253 26 649.00 73254 26D 642.00 73256 D3 642.00 73257 D4 642.00 73258 3 768.00 73259 4 755.00 73260 0B 768.00 7326 26 768.00 73262 26D 759.00 73263 32D 782.00 73264 26D 77.00 73265 32D 800.00 73266 P 75.00 73267 AP 72.00 73268 3 729.00 73269 4 75.00 73270 0 75.00 7327 0A 729.00 73272 0B 729.00 73273 26 729.00 73274 26D 72.00 73276 D3 344.00 73277 D4 343.00 73278 P 73.00 73279 26D 7.00 ELECTRIC HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-4
ELECTRIC HINGES Electric s QC-6 Electric s QC-8 TA234 - QC8 TA274 - QC8 T4A3386 - QC8 800-46-3007 www.assaabloy.ca Electric s QC-8 Swing Clear s T4A3786 - QC8 T4A3795, T4A4795 73324 P 839.00 27 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm x 4 2" 27 mm x 4.30 mm T4A3795 73683 26D 384.00 T4A4795 73690 26D 384.00 73280 3 805.00 7328 4 792.00 73282 0B 805.00 73283 26 805.00 73284 26D 796.00 73285 32D 825.00 73286 3 805.00 73287 4 792.00 73288 0B 805.00 73289 26 805.00 73290 26D 796.00 7329 32D 825.00 73292 P 766.00 73293 AP 766.00 73294 3 774.00 73295 4 766.00 73296 0 766.00 73297 0A 774.00 73298 0B 774.00 73299 26 774.00 73300 26D 766.00 73302 D3 766.00 73303 D4 766.00 73304 P 77.00 73305 AP 77.00 73306 3 77.00 73307 4 766.00 73308 0 766.00 73309 0A 774.00 7330 0B 774.00 733 26 774.00 7332 26D 766.00 7334 D3 766.00 7335 D4 766.00 7336 3 893.00 7337 4 879.00 7338 0B 893.00 7339 26 893.00 73320 26D 883.00 7332 32D 909.00 73322 26D 899.00 73323 32D 924.00 x 4 2" 27 mm x 4.30 mm Electric s QC-0 TA234 - QC0 4 2" x 4" 4.30 mm x 0.60 mm TA274 - QC0 4 2" x 4" 4.30 mm x 0.60 mm 73325 AP 846.00 73326 3 853.00 73327 4 839.00 73328 0 839.00 73329 0A 853.00 73330 0B 853.00 7333 26 853.00 73332 26D 846.00 73334 D3 38.00 73335 D4 370.00 73336 26D 855.00 73337 P 849.00 73900 3 930.00 7390 4 98.00 73902 0B 930.00 73903 26 930.00 73904 26D 92.00 73905 32D 950.00 73906 3 930.00 73907 4 98.00 73908 0B 930.00 73909 26 930.00 7390 26D 92.00 739 32D 950.00 7392 P 892.00 7393 AP 892.00 7394 3 900.00 7395 4 892.00 7396 0 892.00 7397 0A 900.00 7398 0B 900.00 7399 26 900.00 73920 26D 892.00 73922 D3 892.00 73923 D4 892.00 s Effective April 4, 206 EH-5 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Electric s QC-0 TA274 - QC0 T4A3386 - QC0 x 4 2" 27 mm x 4.30 mm T4A3786 - QC0 x 4 2" 27 mm x 4.30 mm 73924 P 897.00 73925 AP 897.00 73926 3 897.00 73927 4 892.00 73928 0 892.00 73929 0A 900.00 73930 0B 900.00 7393 26 900.00 73932 26D 892.00 73934 D3 892.00 73935 D4 892.00 73936 3,08.00 73937 4,005.00 73938 0B,08.00 73939 26,08.00 73940 26D,00.00 7394 32D,035.00 73942 26D,024.00 73943 32D,074.00 73944 P 966.00 73945 AP 972.00 73946 3 980.00 73947 4 966.00 73948 0 966.00 73949 0A 980.00 73950 0B 980.00 7395 26 980.00 73952 26D 972.00 73954 D3 424.00 73955 D4 424.00 73956 P 974.00 73957 26D 982.00 Electric s QC-2 TA234 - QC2 4 2" x 4" 4.30 mm x 0.60 mm 73338 3,053.00 73339 4,040.00 73340 0B,053.00 7334 26,053.00 73342 26D,043.00 73343 32D,074.00 73344 3,053.00 73345 4,040.00 73346 0B,053.00 73347 26,053.00 73348 26D,040.00 73349 32D,074.00 800-46-3007 www.assaabloy.ca Electric s QC-2 TA274 - QC2 4 2" x 4" 4.30 mm x 0.60 mm T4A3386 - QC2 x 4 2" 27 mm x 4.30 mm T4A3786 - QC2 x 4 2" 27 mm x 4.30 mm 73350 P,04.00 7335 AP,04.00 73352 3,023.00 73353 4,04.00 73354 0,04.00 73355 0A,023.00 73356 0B,023.00 73357 26,023.00 73358 26D,04.00 73360 D3,04.00 7336 D4,04.00 73362 P,020.00 73363 AP,020.00 73364 3,020.00 73365 4,04.00 73366 0,04.00 73367 0A,022.00 73368 0B,022.00 73369 26,022.00 73370 26D,04.00 73372 D3,04.00 73373 D4,04.00 73374 3,42.00 73375 4,28.00 73376 0B,42.00 73377 26,42.00 73378 26D,32.00 73379 32D,57.00 73380 26D,47.00 7338 32D,73.00 73382 P,088.00 73383 AP,095.00 73384 3,02.00 73385 4,088.00 73386 0,088.00 73387 0A,02.00 73388 0B,02.00 73389 26,02.00 73390 26D,095.00 73392 D3 45.00 73393 D4 45.00 73395 P,097.00 73394 26D,04.00 ELECTRIC HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-6
ELECTRIC HINGES 800-46-3007 www.assaabloy.ca MacPro Electric s - Concealed Circuit (CC) Product MPB79-CC4 4 2" x 4" 76400 26D 473.00 MPB79-CC8 4.30 mm x 0.60 mm 76402 26D 732.00 MPB79-CC4 76405 26D 473.00 MPB79-CC8 76407 26D 732.00 MPB68-CC4 7640 26D 473.00 MPB68-CC8 7642 26D 732.00 MacPro Electric s - ElectroLynx Quick Connect (QC) Product MPB79-QC4 4 2" x 4" 7640 26D 487.00 MPB79-QC8 4.30 mm x 0.60 mm 76403 26D 745.00 MPB79-QC2 76404 26D 994.00 MPB79-QC4 76406 26D 487.00 MPB79-QC8 76408 26D 745.00 MPB79-QC2 76409 26D 994.00 MPB68-QC4 764 26D 487.00 MPB68-QC8 7643 26D 745.00 MPB68-QC2 7644 26D 994.00 ElectroLynx As part of their promise to provide innovative, fast and effective high security solutions to their customers, certain ASSA ABLOY Group brands offer ElectroLynx, a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx is a registered trademark of ASSA ABLOY Inc. s Effective April 4, 206 EH-7 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Transfer Device Solutions McKinney ElectroLynx Harnesses & Components For Metal Doors CORBIN RUSSWIN, SARGENT, and YALE 800-46-3007 www.assaabloy.ca electric hinges If metal door, order a retrofit cable with Molex connectors on both ends. If the metal door is polystyrene filled or steel stiffened, the cable may need to be routed up and over the door. PART # McKinney Catalog # 3", 6" & 2" Harness Between hinge and the end of an exit device 9398 QC-C003 93982 QC-C006 Description: QC2-3" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to ) QC2-6" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to ) QC2-2" Wire Harness; 8 & 4 Pin Connector w/2 wires 93983 QC-C02 (For Exit Device Rail Jumper to ) 2', 3' & 4' Harness Between hinge and through the door to the lockset or exit device trim Net Max required (Not included) 30.00 QC2 3.00 QC2 42.00 QC2 93984 QC-C200 QC2-26" Wire Harness; 8 & 4 Pin Connector w/2 Wires 45.00 QC2 93985 QC-C206 QC2-32" Wire Harness; 8 & 4 Pin Connector w/2 Wires 5.00 QC2 93986 QC-C300 QC2-38" Wire Harness; 8 & 4 Pin Connector w/2 wires 52.00 QC2 93987 QC-C306 QC2-44" Wire Harness; 8 & 4 Pin Connector w/2 wires 52.00 QC2 93988 QC-C400 QC2-50" Wire Harness; 8 & 4 Pin Connector w/2 wires 53.00 QC2 5' Harness From the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door. 93989 QC-C500 QC2-5' 2" Wire Harness; 8 & 4 Pin Connector w/2 Wires 3.00 QC2 QC2 - Custom sizes available. Consult factory. Harness; 8 & 4 Pin Connector Custom * POA w/2 Wires * Custom size cables less than 50" price at $42.00. Cables over 50" price as $0.38 per inch over 50" price of $42.00. QC2 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-8
electric hinges Transfer Device Solutions 800-46-3007 www.assaabloy.ca McKINNEY ElectroLynx Harnesses & Components For Wood Doors CORBIN RUSSWIN, SARGENT, and YALE If wood door, order a retrofit cable with the Molex connector on one end, and pins crimped on the other end. PART # McKinney CATALOG # 3", 6" & 2" Harness Between hinge and the end of an exit device Description: 93990 QC-C003P QC2-3" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to, Insert pre-pinned ends into plastic Molex connector) QC2-6" Wire Harness; 8 & 4 Pin Connector w/2 wires 9399 QC-C006P (For Exit Device Rail Jumper to, Insert pre-pinned ends into plastic Molex connector) QC2-2" Wire Harness; 8 & 4 Pin Connector w/2 wires 93992 QC-C02P (For Exit Device Rail Jumper to, Insert pre-pinned ends into plastic Molex connector) 2', 3' & 4' Harness Between hinge and through the door to the lockset or exit device trim. 93993 QC-C200P QC2-26" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) Net Max required (Not included) 39.00 QC2 40.00 QC2 5.00 QC2 55.00 QC2 93994 QC-C206P 93995 QC-C300P 93996 QC-C306P QC2-32" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) QC2-38" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) QC2-44" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) 58.00 QC2 59.00 QC2 59.00 QC2 93997 QC-C400P QC2-50" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) 5' Harness From the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door. 93998 QC-C500P QC2-5' 2" Wire Harness; 8 & 4 Pin Connector w/2 Wires (Termination in Field) 60.00 QC2 2.00 QC2 93970 QC-C2500P QC2-25' Wire Harness, 8 & 4 Pin Connector w/2 Wires 29.00 QC2 9397 QC-C3000P QC2-30' Wire Harness; 8 & 4 Pin Connector w/2 Wires 38.00 QC2 Custom * Custom sizes available. Consult the factory POA QC2 * Custom size cables less than 50" price at $42.00. Cables over 50" price as $0.38 per inch over 50" price of $42.00. s Effective April 4, 206 EH-9 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Transfer Device Solutions McKinney ElectroLynx Harnesses & Components CORBIN RUSSWIN, SARGENT, and YALE 800-46-3007 www.assaabloy.ca electric hinges McKinney PART # CATALOG # Miscellaneous Kits Description: 94034 QC-R00 Molex/Repair/Service Kit Miscellaneous Kits Kit Application: Includes 2, 4, 8 Molex receptacles and plugs ( 0 ea) and the corresponding terminals (00 of each type), extraction tool and pinning assembly guide. Customer must purchase Molex crimper separately. Net 265.00 94035 QC-R002 Extraction Tool Quantity, Sold one each 60.00 94036 QC-R003 Molex Hand Crimp Tool Molex tool used to attach terminals to wire (stripped) ends 79.00 PART # McKinney CATALOG # Receptacles and Terminals Description: Kit Application: Net 94037 QC-RF2 Female Receptacle 2 CKT Quantity Bag of 00 68.00 94026 QC-RF4 Female Receptacle 4 CKT Quantity Bag of 00 83.00 94027 QC-RF8 Female Receptacle 8 CKT Quantity Bag of 00 0.00 94028 QC-RM2 Male Receptacle 2 CKT Quantity Bag of 00 73.00 93978 QC-RM4 Male Receptacle 4 CKT Quantity Bag of 00 85.00 93979 QC-RM8 Male Receptacle 8 CKT Quantity Bag of 00 2.00 94029 QC-FT2024 Female Terminal AWG 20-24 Quantity Bag of 00 29.00 94030 QC-FT2630 Female Terminal AWG 26-30 Quantity Bag of 00 29.00 93980 QC-MT2024 Male Terminal AWG 20-24 Quantity Bag of 00 29.00 9403 QC-MT2630 Male Terminal AWG 26-30 Quantity Bag of 00 29.00 94033 QC-DCC Pinning Assembly Guide Quantity Bag of 0 3.00 9406 POE-MT2024 Male Terminal AWG 20-24 Quantity Bag of 00 60.00 9407 POE-RM6 Male Plug 6 CKT Quantity, Bag of 00 50.00 9408 POE-RF6 Female Plug 6 CKT Quantity, Bag of 00 50.00 9409 POE-MT2630 Male Terminal AWG 26-30 Quantity, Bag of 00 27.00 94020 POE-FT2630 Female Terminal AWG 26-30 Quantity, Bag of 00 27.00 Female Receptacle (8 ckt) Locking mechanism Male Plug (8 ckt) Door Cord and EPT 94002 MCK-TSB-C Door Cord Gray/Black Caps 8" Quantity, Sold 5.00 94003 MCK-TSB-CXL Door Cord Gray/Black Caps 36" Quantity, Sold 67.00 94004 MCK-EPT Electrical Power Transfer Quantity, Sold 3.00 94005 MCK-EPTL Electrical Power Transfer, Long Quantity, Sold 49.00 94006 MCK-EL-EPT ElectroLynx EPT -2 wire Quantity, Sold 79.00 94007 MCK-EL-EPTL ElectroLynx EPTL Long -2 wire Quantity, Sold 25.00 As part of their promise to provide innovative, fast and effective high security solutions to their customers, ASSA ABLOY Group brands offer ElectroLynx, a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx is a registered trademark of ASSA ABLOY Inc. s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-0
electric hinges Transfer Device Solutions 800-46-3007 www.assaabloy.ca McKinney ElectroLynx Power over Ethernet (PoE) & Harnesses Frame side harness assembly (5ft length) Cable drain wire concealed in shrink tubing Cable - CAT 5e, 24 AWG stranded, shielded, 00ohm, with drain wire A Cable wires to be terminated in field per lock instructions Frame Side Harness Assembly B PART # PoE Data McKinney CATALOG # U.S. Patent No. 7,824,200 PoE Door Harness Assembly C Cable - CAT 5e, 26 AWG stranded, shielded, 00ohm Description: Two 4-CKT lock mating connectors Net 73695 4.5 x 4.5 TA274 26D PoE Standard Weight 5 Knuckle,38.00 73696 4.5 x 4.5 T4A3786 26D PoE Heavy Weight 5 Knuckle,52.00 Consult the factory for additional items with PoE option. Lock mating connectors are small enough to run through a 3/8" (min.) stile to stile door raceway. Ring terminal to be NOTES: secured inside lock The PoE door & frame harnesses can accommodate a variety of new (with raceway) and retrofit applications. Connectors are small enough to run through a 3/8" (min.) stile-to-stile door raceway. Connects to intelligent Power over Ethernet electromechanical hardware from SARGENT and CORBIN RUSSWIN. PART # McKinney CATALOG # Harness Length Application Description: Net Max Req'd (not included) Door Harnesses 94022 PoE-C206P 30" 94038 PoE-C300P 36" 94039 PoE-C306P 42" 94040 PoE-C400P 48" 9404 PoE-C406P 54" Between & PoE Lock 94042 PoE-C500P 60" Door Harness Assembly 9402 PoE-C700P 84" Door Harness Assembly 94043 PoE-C300P 56" Door Harness Assembly EPT Harness 94023 PoE-CEPT30 360" EPT Harness Assembly EPT Harness Frame Harness 94044 PoE-C500P 80" 20" to 2 door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 26" to 3" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 32" to 36" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 37" to 42" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 43" to 48" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). From the hinge location, up the jamb to the wall/ceiling. PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly Between hinge and PoE Network Cable & Switch PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly 73.00 PoE 80.00 PoE 85.00 PoE 9.00 PoE 98.00 PoE 7.00 PoE 77.00 PoE 85.00 PoE 26.00 PoE 227.00 PoE Custom Custom sizes available. Consult factory. POA PoE The door harness connectors are small enough to run through a 3/8" (minimum) stile-to-stile door raceway. *See the McKinney Catalog for additional finishes and hinge types. Note: One hinge, door harness and frame harness are required for each PoE opening Cables over 60" add $.67 per inch to 60" price. s Effective April 4, 206 EH- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Non-Ferrous Bearing TA39 x 4 2" 27 mm x 4.30 mm 800-46-3007 www.assaabloy.ca Non-Ferrous Bearing TA393 x 4 2" 27 mm x 4.30 mm FULL MORTISE ANCHOR HINGE SETS Anchor plate for jamb and door header only. Permits use of holders, closers concealed in top of jamb. Anchor plate for jamb header only, permits the use of holders and closers concealed in the top of the door. Hand x 4 2" 27 mm x 4.30 mm R.H. 7668 P 754.00 SET L.H. 7669 P 754.00 SET R.H. 7684 26D 787.00 SET L.H. 7685 26D 787.00 SET R.H. 7688 32D 855.00 SET L.H. 7689 32D 855.00 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. TA392 Hand R.H. 75565 P 285.00 SET L.H. 75566 P 285.00 SET R.H. 7552 26D 293.00 SET L.H. 7553 26D 293.00 SET R.H. 7558 32D 862.00 SET L.H. 75582 32D 862.00 SET Non-Ferrous Bearing s 4" Door Leg TA394 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. x 4 2" 27 mm x 4.30 mm Anchor plate for jamb and door header permits use of surface applied holders and closers. Anchor plate for both jamb and door header. Permits use of both holders, closers. Hand Hand R.H. 75502 P 285.00 SET L.H. 75503 P 285.00 SET R.H. 75496 26D 285.00 SET L.H. 75497 26D 285.00 SET R.H. 75500 32D 862.00 SET L.H. 7550 32D 862.00 SET 4 SETS SET 28 R.H. 75435 P 294.00 SET L.H. 75436 P 294.00 SET R.H. 7545 26D 293.00 SET L.H. 75452 26D 293.00 SET R.H. 75455 32D 865.00 SET L.H. 75456 32D 865.00 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. AH-
FULL MORTISE ANCHOR HINGE SETS 800-46-3007 www.assaabloy.ca Heavy Weight Beveled Edge Non-Ferrous Bearing TA5392 x 4 2" 27 mm x 4.30 mm Non-Ferrous Bearing s For Beveled Edge Doors 4" Door Leg TA5394 x 4 2" 27 mm x 4.30 mm Anchor plate for both jamb and door header permits use of surface applied holders and closers. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand Hand R.H. 75605 P 285.00 SET L.H. 75606 P 285.00 SET R.H. 75546 26D 293.00 SET L.H. 75547 26D 293.00 SET R.H. 75544 32D 862.00 SET L.H. 75545 32D 862.00 SET 4 SETS SET 28 R.H. 75700 P 294.00 SET L.H. 7570 P 294.00 SET R.H. 75735 26D 293.00 SET L.H. 75736 26D 293.00 SET R.H. 75739 32D 865.00 SET L.H. 75740 32D 865.00 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. TA5393 x 4 2" 27 mm x 4.30 mm Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. Steel Anchor Bearing TA79 x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in the top of the door. Anchor plate for door header only. Permits use of holders, closers concealed in top of jamb. Hand Hand R.H. 75550 P 285.00 SET L.H. 7555 P 285.00 SET R.H. 75695 26D 285.00 SET L.H. 75696 26D 285.00 SET R.H. 75657 32D 862.00 SET L.H. 75658 32D 862.00 SET 4 SETS SET 28 R.H. 7650 P 80.00 SET L.H. 765 P 80.00 SET R.H. 7666 26D 208.00 SET L.H. 7667 26D 208.00 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. s Effective April 4, 206 AH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Anchor Bearing TA792 x 4 2" 27 mm x 4.30 mm 800-46-3007 www.assaabloy.ca Steel Anchor 4" Door Leg TA794 x 4 2" 27 mm x 4.30 mm FULL MORTISE ANCHOR HINGE SETS Anchor plate for jamb and door header permits use of surface applied holders and closers. Hand R.H. 75490 P 80.00 SET L.H. 7549 P 80.00 SET R.H. 75492 26D 208.00 SET L.H. 75493 26D 208.00 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand R.H. 75820 P 9.00 L.H. 7582 P 9.00 R.H. 75836 26D 27.00 L.H. 75837 26D 27.00 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. TA793 x 4 2" 27 mm x 4.30 mm Steel Heavy Weight Beveled Edge Bearing TA5792 x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in top of the door. Hand R.H. 75585 P 80.00 SET L.H. 75586 P 80.00 SET R.H. 7560 26D 208.00 SET L.H. 75602 26D 208.00 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. Anchor plate for jamb and door header permits use of surface applied holders and closers. Hand R.H. 75530 P 80.00 SET L.H. 7553 P 80.00 SET R.H. 75532 26D 208.00 SET L.H. 75533 26D 208.00 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. AH-3
FULL MORTISE ANCHOR HINGE SETS 800-46-3007 www.assaabloy.ca Steel Heavy Weight Beveled Edge Bearing TA5793 x 4 2" 27 mm x 4.30 mm Steel Bearing s For Beveled Edge Doors 4" Door Leg TA5794 x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in top of the door. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand R.H. 75627 P 80.00 SET L.H. 75628 P 80.00 SET 4 SETS SET 28 R.H. 75554 26D 208.00 SET L.H. 75555 26D 208.00 SET Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. Hand R.H. 75868 P 9.00 L.H. 75869 P 9.00 R.H. 75884 26D 27.00 L.H. 75885 26D 27.00 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. s Effective April 4, 206 AH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Three Knuckle Standard Weight Non-Ferrous Bearing TA374 4 2" 4.30 mm 27 mm Three Knuckle Heavy Weight Non-Ferrous Bearing TA384 4 2" 4.30 mm 27 mm 74650 P 25.00 74658 AP 25.00 7465 3 25.00 74652 4 25.00 74645 0 25.00 74659 0A 25.00 74646 0B 258.00 74656 26 25.00 74657 26D 25.00 74643 32D 25.00 74669 P 264.00 74677 AP 264.00 74670 3 264.00 7467 4 264.00 74664 0 264.00 74660 0A 264.00 74665 0B 324.00 74675 26 264.00 74676 26D 264.00 74662 32D 264.00 24 3 28 24 3 32 74840 P 349.00 74848 AP 349.00 7484 3 349.00 74842 4 349.00 74835 0 349.00 74849 0A 349.00 24 3 40 74836 0B 405.00 74846 26 349.00 74847 26D 349.00 74833 32D 349.00 74859 P 408.00 74867 AP 408.00 74860 3 408.00 7486 4 408.00 74854 0 408.00 74850 0A 408.00 24 3 47 74855 0B 53.00 74865 26 408.00 74866 26D 408.00 74852 32D 408.00 Continued on next column 800-46-3007 www.assaabloy.ca Three Knuckle Heavy Weight Non-Ferrous Bearing TA384 Continued 6" 52.4 mm for 3 4" 44.4 mm door Steel Three Knuckle Standard Weight Bearing TA774 4 2" 4.30 mm 27 mm 74878 P 746.00 74886 AP 746.00 74879 3 746.00 74880 4 746.00 74873 0 746.00 74887 0A 746.00 74874 0B 855.00 74884 26 746.00 74885 26D 746.00 7487 32D 746.00 7449 P 05.00 74492 AP 05.00 74496 3 05.00 74497 4 05.00 74499 0 05.00 74507 0A 05.00 74500 0B 40.00 74503 26 05.00 74504 26D 05.00 7450 P 259.00 745 AP 259.00 7455 3 259.00 7456 4 259.00 7458 0 259.00 74508 0A 259.00 7459 0B 298.00 74522 26 259.00 74523 26D 259.00 Steel Three Knuckle Heavy Weight Bearing TA784 4 2" 4.30 mm 7542 P 225.00 7543 AP 225.00 7547 3 225.00 7548 4 225.00 7550 0 225.00 7558 0A 225.00 755 0B 270.00 7554 26 225.00 7555 26D 225.00 8 3 63 24 3 23 24 3 27 3 24 36 Continued on next page HALF MORTISE HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HM-
HALF MORTISE HINGES Steel Three Knuckle Heavy Weight Bearing TA784 Continued 27 mm 6" 52.4 mm for 3 4" 44.4 mm door 800-46-3007 www.assaabloy.ca Steel Three Knuckle Heavy Weight Swing Clear TA789 27 mm 756 P 27.00 7562 AP 27.00 7566 3 27.00 7567 4 27.00 7569 0 27.00 7577 0A 27.00 7570 0B 324.00 7573 26 27.00 7574 26D 27.00 7580 P 527.00 758 AP 527.00 7585 3 527.00 7586 4 527.00 7588 0 527.00 7596 0A 527.00 7589 0B 607.00 7592 26 527.00 7593 26D 527.00 s are NRP and Reversible. 75330 P 269.00 7533 AP 269.00 75335 3 269.00 75336 4 269.00 75338 0 269.00 75346 0A 269.00 75339 0B 324.00 75342 26 269.00 75343 26D 269.00 3 24 44 3 8 59 24 3 47 Steel Five Knuckle Standard Weight TA2774 4 2" 4.30 mm 27 mm 57880 P 7.00 57885 AP 8.00 5788 3.00 57888 4 8.00 57883 0 8.00 64989 0A.00 64983 0B.00 64986 26.00 57884 26D 85.00 57955 P 99.00 57959 AP 8.00 57963 3 48.00 57956 4 8.00 57960 0 8.00 65007 0A 48.00 65008 0B 48.00 650 26 48.00 57958 26D 27.00 24 3 23 24 3 27 Standard Weight Five Knuckle Non-Ferrous Bearing TA3374 4 2" 4.30 mm 27 mm 6406 P 93.00 642 AP 93.00 6423 3 24.00 6424 4 93.00 643 0 93.00 6405 0A 24.00 647 0B 24.00 64 26 24.00 640 26D 24.00 644 32 294.00 645 32D 258.00 646 P 253.00 644 AP 253.00 6462 3 284.00 6463 4 253.00 6440 0 253.00 6438 0A 284.00 6446 0B 260.00 6467 26 269.00 6468 26D 284.00 6444 32 352.00 6445 32D 347.00 24 3 28 24 3 32 s Effective April 4, 206 HM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Heavy Weight Non-Ferrous Bearing T4A3384 800-46-3007 www.assaabloy.ca Steel Heavy Weight Bearings T4A3784 HALF MORTISE HINGES 4 2" 4.30 mm 27 mm 6" 52.4 mm for 3 4" 44.4 mm door 70775 P 96.00 70782 AP 96.00 70776 3 7.00 70777 4 96.00 664 0 96.00 70783 0A 7.00 6643 0B 7.00 7078 26 7.00 6640 26D 02.00 70770 32 40.00 7077 32D 35.00 70800 P 6.00 70807 AP 6.00 7080 3 35.00 70802 4 6.00 666 0 6.00 70808 0A 35.00 6665 0B 35.00 70806 26 35.00 6660 26D 2.00 6663 32D 59.00 70829 P 46.00 70837 AP 46.00 70830 3 73.00 7083 4 46.00 7084 0 46.00 70824 0A 73.00 70825 0B 73.00 70835 26 73.00 70836 26D 56.00 24 3 40 24 3 40 8 3 63 4 2" 4.30 mm 27 mm 6" 52.4 mm for 3 4" 44.4 mm door 58220 P 65.00 72478 AP 76.00 72482 3 89.00 58222 4 76.00 72484 0 76.00 7249 0A 89.00 72485 0B 89.00 72488 26 89.00 58223 26D 80.00 58240 P 83.00 5824 AP 86.00 7252 3 02.00 7253 4 86.00 7255 0 86.00 72520 0A 02.00 7256 0B 02.00 7259 26 02.00 58242 26D 89.00 58270 P 00.00 72560 AP 04.00 58273 3 25.00 72542 4 04.00 58284 0 04.00 7254 0A 25.00 72544 0B 25.00 72547 26 25.00 58283 26D 09.00 24 3 3 24 3 36 2 3 32 Steel Swing Clear Heavy Weight Bearing T4A3789 27 mm 7302 P 96.00 73022 AP 97.00 73026 3 6.00 73027 4 97.00 73029 0 97.00 73037 0A 6.00 73030 0B 6.00 73033 26 6.00 73034 26D 99.00 24 3 47 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HM-3
HALF SURFACE HINGES Standard Weight Non-Ferrous Bearing TA372 800-46-3007 www.assaabloy.ca TA2372 4 2" 4.30 mm 27 mm Refer to page HS-3 for Back Plates. 7462 P 52.00 74620 AP 52.00 7463 3 202.00 7464 4 52.00 74607 0 52.00 7462 0A 202.00 74608 0B 202.00 7468 26 202.00 7469 26D 90.00 74605 32D 294.00 7463 P 27.00 74639 AP 27.00 74632 3 247.00 74633 4 27.00 74626 0 27.00 74640 0A 247.00 74627 0B 247.00 74637 26 247.00 74638 26D 230.00 74624 32D 350.00 24 3 30 24 3 38 Heavy Weight Non-Ferrous Bearing 4 2" 4.30 mm 27 mm Refer to page HS-3 for Back Plates. 57685 AP 239.00 57686 P 239.00 57687 3 259.00 57688 4 239.00 57689 0 239.00 57690 0B 259.00 5769 26 259.00 57692 26D 245.00 57694 D-3 239.00 57695 D-4 239.00 57696 32D 30.00 Steel Standard Weight 24 3 30 57697 32D 30.00 24 3 38 TA382 TA772 4 2" 4.30 mm 27 mm Refer to page HS- 3 for Back Plates. 74764 P 28.00 74772 AP 28.00 74765 3 30.00 74766 4 28.00 74759 0 28.00 74773 0A 28.00 74760 0B 30.00 74770 26 30.00 7477 26D 287.00 74757 32D 359.00 74783 P 335.00 7479 AP 335.00 74784 3 356.00 74785 4 335.00 74778 0 335.00 74792 0A 356.00 74779 0B 356.00 74789 26 356.00 74790 26D 349.00 74776 32D 487.00 24 3 50 24 3 57 4 2" 4.30 mm 27 mm Refer to page HS-3 for Back Plates. 74453 P 79.00 74454 AP 76.00 74458 3 85.00 74459 4 75.00 7446 0 75.00 74469 0A 85.00 74462 0B 85.00 74465 26 85.00 74466 26D 76.00 74472 P 98.00 74473 AP 2.00 74477 3 20.00 74478 4 98.00 74480 0 98.00 74470 0A 9.00 7448 0B 9.00 74484 26 9.00 74485 26D 2.00 24 3 34 24 3 43 s Effective April 4, 206 HS- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Heavy Weight Bearing TA782 800-46-3007 www.assaabloy.ca Steel Standard Weight TA2772 HALF SURFACE HINGES 4 2" 4.30 mm 27 mm Refer to page HS-3 for Back Plates. 75066 P 24.00 75067 AP 225.00 7507 3 235.00 75072 4 24.00 75074 0 24.00 75082 0A 235.00 75075 0B 235.00 75078 26 235.00 75079 26D 225.00 75085 P 225.00 75086 AP 245.00 75090 3 28.00 7509 4 238.00 75093 0 238.00 750 0A 28.00 75094 0B 28.00 75097 26 28.00 75098 26D 245.00 24 3 38 24 3 48 Steel Heavy Weight Swing Clear TA796 4 2" 4.30 mm 27 mm Refer to page HS-3 for Back Plates. 5770 P 79.00 5779 AP 80.00 5774 3 90.00 5772 4 79.00 5775 0 79.00 57708 0A 90.00 5772 0B 90.00 5776 26 90.00 5777 26D 80.00 57830 P 04.00 57834 AP 9.00 64920 3 26.00 6492 4 04.00 57835 0 04.00 57829 0A 26.00 57839 0B 26.00 64926 26 26.00 57833 26D 9.00 24 3 30 24 3 38 27 mm 75387 P 208.00 75388 AP 22.00 75392 3 27.00 75393 4 208.00 75395 0 208.00 75403 0A 27.00 75396 0B 27.00 75399 26 27.00 75400 26D 22.00 24 3 70 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HS-2
HALF SURFACE HINGES HeavyWeightNon-FerrousBearing T4A3382 800-46-3007 www.assaabloy.ca Steel Heavy Weight Bearing T4A3782 4 2" 4.30 mm 27 mm 6" 52.4 mm Refer to page HS-3 for Back Plates. HeavyWeightSteelBearing T4A3796 70560 P 28.00 6565 AP 275.00 7056 3 30.00 70562 4 28.00 6568 0 28.00 656 0A 30.00 6569 0B 30.00 70566 26 30.00 70567 26D 287.00 6562 32 447.00 6563 32D 359.00 6589 P 335.00 6597 AP 335.00 6590 3 356.00 659 4 335.00 6584 0 356.00 6580 0A 356.00 6585 0B 356.00 6579 26 356.00 6596 26D 349.00 658 32 349.00 6582 32D 487.00 70602 P 47.00 7060 AP 47.00 70603 3 446.00 70604 4 47.00 6604 0 47.00 706 0A 446.00 6605 0B 446.00 70608 26 446.00 70609 26D 394.00 24 3 50 24 3 57 8 3 66 4 2" 5805 P 24.00 4.30 mm 5802 AP 225.00 580 3 235.00 58 4 24.00 5806 0 24.00 5820 0A 235.00 5808 0B 235.00 588 26 235.00 5807 26D 225.00 5845 P 238.00 27 mm 5847 AP 245.00 72280 3 28.00 7228 4 238.00 5846 0 238.00 5849 0A 28.00 72283 0B 28.00 72286 26 28.00 72287 26D 245.00 6" 5880 P 30.00 52.4 mm 5879 AP 30.00 for 72297 3 330.00 3 4" 72298 4 30.00 44.4 mm door 72300 0 30.00 5883 0A 330.00 7230 0B 330.00 72304 26 330.00 588 26D 30.00 Refer to page HS-3 for Back Plates. Steel Back Plates BP-0 BP- BP-2 24 3 38 24 3 48 2 3 43 Product 27 mm 73509 P 238.00 7350 AP 24.00 7354 3 247.00 7355 4 238.00 7357 0 238.00 73525 0A 247.00 7358 0B 247.00 7352 26 247.00 73522 26D 24.00 2 35 4 2" 4.30 mm 27 mm 27 mm 4 2" 4.30 mm BP-0 (TA2772) (T4A3782) BP- (T4A3797) BP-2 (572) 6324 P 8.00 63242 0 8.00 63243 0B 2.00 63240 26D 8.00 63248 P 9.00 63249 0 9.00 63247 26D 9.00 63256 P 9.00 63257 0 9.00 63255 26D 9.00 AS ORDERED AS ORDERED AS ORDERED 5593 26D 9.00 AS ORDERED s Effective April 4, 206 HS-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Standard Weight 3 Knuckle Non- Ferrous Bearing TA37 800-46-3007 www.assaabloy.ca Steel Standard Weight 3 Knuckle Bearing TA77 FULL SURFACE HINGES 4 2" 4.30 mm 27 mm 74555 P 294.00 74563 AP 294.00 74556 3 294.00 74557 4 294.00 74550 0 294.00 74564 0A 265.00 7455 0B 364.00 7456 26 294.00 74562 26D 294.00 74548 32D 294.00 74574 P 352.00 74582 AP 352.00 74575 3 352.00 74576 4 352.00 74569 0 352.00 74584 0A 352.00 74570 0B 422.00 74580 26 352.00 7458 26D 352.00 74567 32D 352.00 24 3 34 24 3 43 4 2" 4.30 mm 27 mm 74396 P 82.00 74397 AP 82.00 7440 3 82.00 74402 4 82.00 74404 0 82.00 7442 0A 82.00 74405 0B 24.00 74408 26 82.00 74409 26D 82.00 7445 P 257.00 7446 AP 257.00 74420 3 257.00 7442 4 257.00 74423 0 257.00 7443 0A 257.00 74424 0B 309.00 74427 26 257.00 74428 26D 257.00 24 3 27 24 3 35 Heavy Weight 3 Knuckle Non-Ferrous Bearing TA38 Steel Heavy Weight 3 Knuckle Bearing TA78 4 2" 4.30 mm 27 mm 74707 P 287.00 7475 AP 287.00 74708 3 287.00 74709 4 287.00 74702 0 287.00 7476 0A 287.00 74703 0B 394.00 7473 26 287.00 7474 26D 287.00 74700 32D 287.00 74726 P 450.00 74734 AP 450.00 74727 3 450.00 74728 4 450.00 7472 0 450.00 74735 0A 450.00 74722 0B 570.00 74732 26 450.00 74733 26D 450.00 7479 32D 450.00 24 3 46 24 3 62 4 2" 4.30 mm 27 mm 75009 P 24.00 7500 AP 24.00 7504 3 24.00 7505 4 24.00 7507 0 24.00 75025 0A 24.00 7508 0B 270.00 7502 26 24.00 75022 26D 24.00 75028 P 450.00 75029 AP 450.00 75033 3 450.00 75034 4 450.00 75036 0 450.00 75044 0A 450.00 75037 0B 56.00 75040 26 450.00 7504 26D 450.00 24 3 37 24 3 44 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FS-
FULL SURFACE HINGES 800-46-3007 www.assaabloy.ca Steel Swing Clear Heavy Weight 3 Knuckle Bearing TA797 Steel Standard Weight 5 Knuckle Bearing TA277 27 mm Heavy Weight 5 Knuckle Non-Ferrous Bearing T4A338 4 2" 4.30 mm 27 mm 6" 52.40 mm 75406 P 262.00 75407 AP 269.00 754 3 279.00 7542 4 262.00 7544 0 262.00 75422 0A 279.00 7545 0B 279.00 7548 26 279.00 7549 26D 269.00 655 P 28.00 658 AP 28.00 65 3 30.00 657 4 28.00 650 0 28.00 6506 0A 30.00 656 0B 30.00 6850 26 30.00 68502 26D 287.00 6507 32 447.00 6508 32D 359.00 63250 P 335.00 6325 AP 335.00 63252 3 356.00 6528 4 335.00 6520 0 335.00 63253 0A 356.00 659 0B 356.00 63254 26 356.00 652 26D 349.00 6522 32 609.00 6523 32D 487.00 63283 P 47.00 6329 AP 47.00 63284 3 446.00 63285 4 47.00 63278 0 47.00 63292 0A 446.00 63279 0B 446.00 63289 26 446.00 63290 26D 426.00 24 3 64 24 3 46 24 3 62 8 3 67 4 2" 4.30 mm 27 mm Steel Heavy Weight Bearing T4A378 4 2" 4.30 mm 27 mm 6" 52.40 mm 57525 P 82.00 57529 AP 9.00 5758 3 99.00 5759 4 82.00 57528 0 82.00 57534 0A 99.00 57530 0B 99.00 57524 26 99.00 57533 26D 9.00 57575 P 05.00 57572 AP 9.00 57578 3 05.00 57579 4 05.00 57576 0 05.00 57584 0A 25.00 57582 0B 25.00 57573 26 25.00 57577 26D 9.00 58065 P 24.00 58062 AP 225.00 7288 3 225.00 7289 4 24.00 729 0 25.00 7298 0A 235.00 7292 0B 235.00 7295 26 235.00 58066 26D 225.00 58075 P 245.00 7227 AP 245.00 7222 3 28.00 58076 4 238.00 72223 0 238.00 7223 0A 28.00 72224 0B 28.00 72227 26 28.00 72228 26D 245.00 58090 P 30.00 58092 AP 30.00 7225 3 330.00 72252 4 30.00 72254 0 30.00 72262 0A 330.00 72255 0B 330.00 72258 26 330.00 72259 26D 30.00 24 3 27 24 3 35 24 3 37 24 3 44 8 3 48 s Effective April 4, 206 FS-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Standard Weight Full Mortise Single Acting 502 C US LISTED 800-46-3007 www.assaabloy.ca SPRING HINGES 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 5593 P 73.00 55902 AP 82.00 55908 3 87.00 55903 4 73.00 55904 0 73.00 55928 0A 87.00 55905 0B 87.00 559 26 87.00 55907 26D 82.00 5590 D3 82.00 55929 D4 82.00 56002 P 9.00 56003 AP 99.00 5600 3 07.00 56004 4 9.00 56005 0 9.00 5603 0A 07.00 56006 0B 07.00 56009 26 07.00 56008 26D 99.00 5600 D3 99.00 56032 D4 99.00 56007 5 99.00 560 9 07.00 5602 4 99.00 48 3 40 48 3 54 Reverse Spring 502R 5607 P 9.00 5608 AP 99.00 56025 3 07.00 5609 4 9.00 56020 0 9.00 56030 0A 07.00 5602 0B 07.00 5602E 0BE 98.00 56024 26 07.00 56023 26D 99.00 5606 D3 99.00 5605 D4 99.00 56022 5 99.00 56026 9 07.00 56027 4 07.00 48 3 54 56034 P 98.00 48 3 54 56035 26D 05.00 For other finishes of 502 R add $6.00 to the 502 price. 502 x TRS Option $4.00. NOTE: Consult the Factory for information on our 502 with new Security Feature. 522 No. Fin. Per Set 4 2" x 4" 5598 P 270.00 SET 4.30 mm x 0.60 mm 55982 AP 288.00 SET 55989 3 38.00 SET 55983 4 270.00 SET 55984 0 270.00 SET 55993 0A 38.00 SET 55985 0B 38.00 SET 55988 26 38.00 SET 55987 26D 288.00 SET 55980 D3 288.00 SET 55994 D4 288.00 SET 55986 5 288.00 SET 55990 9 38.00 SET 5599 4 38.00 SET C US LISTED Set 6 SETS SET 54 Stainless Steel Standard Weight 552 No. Fin. Per Set 5604 P 270.00 SET 56042 AP 288.00 SET 56049 3 38.00 SET 56043 4 270.00 SET 56044 0 270.00 SET 56038 0A 38.00 SET 56045 0B 38.00 SET 56048 26 38.00 SET 56047 26D 288.00 SET 56040 D3 288.00 SET 56039 D4 288.00 SET 56046 5 288.00 SET 56050 9 38.00 SET 5605 4 38.00 SET 4 2" x 4" 4.30 mm x 0.60 mm Set 6 SETS SET 54 56056 32D 9.00 EA. 48 3 54 56080 32D 9.00 EA. 48 3 56 Allen Wrench set for 502 / 522 / 552 / 572 Spring s MK08808B @ $5.00 per set s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. SH-
SPRING HINGES Steel Standard Weight Half Surface Single Acting 572 C US 4 2" 4.30 mm 4 2" x 4" 4.30 mm x 0.60 mm 800-46-3007 www.assaabloy.ca Fin. LISTED Refer to page HS-3 for BP-2 Backplate. MPS60 MPS679 MK0379 56090 26D 90.00 24 3 30 MacPro Spring s C US LISTED 76388 5 28.00 48 3 54 76380 P 28.00 76385 5 28.00 76378 26D 28.00 C US LISTED Set includes 2 Spring s and Bearing. Cross pin for MPS60 Wrench is No. Fin. Per Set Set 48 3 54 76379 26D 5.00 6 SETS SET 30 0.27 ea. 0.54 ea. Steel Door Spring Adjustable Tension 9" 228.6 mm 45 5537 D4 35.00 EA. 50 53 "279.4mm 452 5538 D4 4.00 EA. 25 34 3"330.2mm 453 5540 D4 48.00 EA. 25 38 Steel Full Mortise Double Acting Simplex Butt 00 3" 72.20 mm 4" 0.60 mm 27 mm 6" 52.4 mm 6" x 4 2" 52.4 mm x 4.30 mm 55582 P 09.00 5558 D 3.00 55585 2C 09.00 55587 3 36.00 55583 4 52.00 55584 0 36.00 55590 26 97.00 55588 26D 74.00 55633 P 6.00 55632 D 6.00 55636 2C 52.00 55638 3 62.00 55634 4 45.00 55635 0 45.00 55642 0A 208.00 5564 26 208.00 55639 26D 85.00 55673 P 6.00 55677 AP 75.00 55672 D 6.00 55676 2C 98.00 55678 3 22.00 55674 4 98.00 55675 0 98.00 55680 26 284.00 5568 26D 256.00 5572 P 76.00 557 D 76.00 5575 2C 28.00 5577 3 244.00 5573 4 28.00 5574 0 28.00 5572 0A 33.00 5579 26 33.00 55720 26D 28.00 5575 P 95.00 55758 D 95.00 55752 2C 242.00 55762 3 259.00 55756 4 242.00 55755 0 242.00 55760 0A 349.00 5576 26 349.00 55754 26D 349.00 Steel Full Mortise Double Acting Simplex Butt Non-Template 900 See page SH-4 for replacement parts. 8" 203.2 mm 58265 P 340.00 58267 AP 374.00 58264 D 340.00 58266 2C 424.00 58273 3 476.00 58274 4 424.00 58275 0 424.00 58277 0A 6.00 58272 26 6.00 58262 26D 542.00 40 2 50 24 2 45 6 2 53 2 2 56 2 2 55 2 7 s Effective April 4, 206 SH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Steel Full Mortise Double Acting Simplex Clamp Flange Butt 900 800-46-3007 www.assaabloy.ca HS00 SPRING HINGES 8" 203.2 mm 5933 P 489.00 5934 AP 530.00 5937 D 376.00 59333 2C 608.00 59337 3 654.00 59335 4 608.00 59336 0 608.00 59338 0A 876.00 59340 26 876.00 59322 26D 792.00 See page SH-4 for replacement parts. 2 23 3" 76.20 mm 4" 0.60 mm 55787 P 09.00 55795 AP 20.00 55786 D 09.00 55788 2C 47.00 55792 3 52.00 55790 4 09.00 5579 0 09.00 55796 0A 97.00 55797 26 97.00 55794 26D 74.00 55824 P 6.00 55833 AP 8.00 55823 D 6.00 55825 2C 45.00 55828 3 62.00 55832 4 45.00 55830 0 45.00 55834 0A 208.00 55835 26 208.00 5583 26D 85.00 See page SH-4 for replacement parts. 20 2 26 20 2 37 Ajax Double Acting Horizontal Pivot 300 Ajax Double Acting Horizontal Pivot With Jamb Attaching Plate J300 57076 P 220.00 57080 D 220.00 5708 2C 24.00 57079 3 299.00 57077 4 24.00 57078 0 24.00 57085 0A 350.00 57086 26 350.00 57084 26D 38.00 8 SET 29 300 / J300 SERIES each net TOP PIVOT & SOCKET 6.00 JAMB ATTACHING PLATE* 25.00 SIDE PLATE* 30.00 BACK PLATE* 9.00 *Specify finish when ordering. For concrete or tile floor installation 576 P 238.00 5724 D 238.00 579 2C 264.00 5720 3 32.00 577 4 264.00 578 0 264.00 572 0A 388.00 5723 26 388.00 5722 26D 343.00 0 SET 33 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. SH-3
SPRING HINGES Ajax Double Acting Horizontal Pivot 4007RB 800-46-3007 www.assaabloy.ca Reversed Brackets 8007 4007-MRB 5737 P 435.00 57376 D 435.00 57373 2C 588.00 57378 3 77.00 57377 4 588.00 57374 0 588.00 57375 0A 93.00 57379 26 93.00 57372 26D 826.00 0 SET 35 Mortised and Reversed Brackets H8007 582 P 7.00 586 D 7.00 584 2C 46.00 585 3 65.00 58 4 46.00 583 0 46.00 589 0A 208.00 5809 26 208.00 588 26D 87.00 20 SET 25 57403 P 435.00 5742 D 435.00 57405 2C 588.00 57407 3 77.00 57408 4 588.00 57404 0 588.00 57409 0A 93.00 574 26 93.00 57406 26D 826.00 0 SET 35 5852 P 35.00 5857 D 35.00 5854 2C 72.00 5855 3 99.00 5856 4 72.00 5853 0 72.00 5858 0A 249.00 5860 26 249.00 585 26D 237.00 20 SET 25 4007RB/4007-MRB Series Replacement s TENSION PIN 5.00 SPRING 30.00 NYLON BUSHINGS 5.00 TENSION RODS 5.00 No replacement parts are available. *Specify part number, size and finish when ordering. REPLACEMENT PARTS FOR DOUBLE ACTING SPRING HINGES AND PIVOTS McKINNEY Description 00 00 00 00 00 900 900 Needed 3" 4" 6" 6x4 2" 8" 8" Required Per T53 - Spring 2 9.00 9.00 9.00 9.00 30.00 33.00 45.00 T56 Tension Pin 2 4.00 4.00 4.00 4.00 4.00 4.00 4.00 TS550 Solid Metal Cap X 4 9.00 9.00 2.00 2.00 30.00 30.00 24.00 TS50 Loose Knob X 2 5.00 5.00 5.00 5.00 5.00 6.00 6.00 TS520 Fast Knob 2 5.00 5.00 5.00 5.00 5.00 6.00 6.00 TS525 Pawlnut X 4 x x x x 3.00 x x TS530 Tension Lever 4.00 4.00 4.00 4.00 4.00 4.00 4.00 TS540 Plug X x x x 8.00 8.00 x x s Effective April 4, 206 SH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
EP-5J 800-46-3007 www.assaabloy.ca 63336 P 90.00 SET 20 SET 38 63338 0 24.00 SET 20 SET 38 63346 26D 204.00 SET 20 SET 38 RESCUE HARDWARE EP-5J Top Pivot and Socket 4.00 EP-5J Bottom Bracket and Bottom Door Socket 4.00 Screws for EP-5J 3.00 ea For Cylindrical or Bored Locks CSS-9 May not work with mortise locks. Consult the factory for mortise lock application. Not for use with deadbolt and Plunger Assembly for DS-6 or CSS-9 65.00 only 9.00 Springs only.00 Emergency Door Stop DS-6 5 3 4" 46 mm Center Hung 63309 0 239.00 Center Hung 63330 26D 239.00 Offset Hung 6330 0 239.00 Offset Hung 63332 26D 239.00 5 7 8" 49.225 mm Center Hung 6334 0 239.00 Center Hung 6333 26D 239.00 Offset Hung 63294 0 239.00 Offset Hung 63293 26D 239.00 6 3 4" 7.40 mm Center Hung 6333 26D 239.00 Offset Hung 6332 0 239.00 Offset Hung 63329 26D 239.00 Custom s 63350 322.00 AS ORDERED AS ORDERED AS ORDERED 63337 0 78.00 20 2 63345 26D 22.00 20 2 Consult the factory for availability of custom sizes Custom Engineering and Set Up charges may apply Double Lipped Strike DLS-8 5 3 4" 46 mm Center Hung 63260 0 82.00 Center Hung 6335 26D 82.00 AS ORDERED May not work with mortise locks. Consult the factory for mortise lock application. Not for use with deadbolt Consult the factory for availability of custom sizes Custom Engineering and Set Up charges may apply 5 3 4" 46 mm Offset Hung 6337 0 82.00 Offset Hung 6339 26D 82.00 AS ORDERED 6 3 4" 7.40 mm Center Hung 63263 0 82.00 Center Hung 6336 26D 82.00 AS ORDERED 6 3 4" 7.40 mm Offset Hung 6338 0 82.00 Offset Hung 63320 26D 82.00 AS ORDERED Custom s 6335 63.00 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. RH-
SPECIALTY HINGES Raised Barrel Pocket PH-4 For Narrow Stile 800-46-3007 www.assaabloy.ca 55957 RBTA274 58436 RBT4A3786 6353 P 336.00 63533 3 427.00 63535 0 346.00 63537 0B 427.00 63538 26 427.00 63539 26D 367.00 26D 06.00 3 48 55 26D 54.00 3 24 35 AS ORDERED StormPro Tornado Resistant s SP3386 x 4 2" 27 mm x 4.30 mm SP3786 x 4 2" 27 mm x 4.30 mm 73972 32D 24.00 3 24 37 73982 32D 26.00 3 24 43 73970 P 97.00 3 24 35 7397 26D 06.00 3 24 35 73980 P 2.00 3 24 4 7398 26D 8.00 3 24 4 All StormPro products should be ordered as a complete integrated unit including the frame and door along with other StormPro hardware. Storm- Pro hinges are a required component of the certified StormPro system Interim s Door or Frame Leaf Opposite Leaf Trimmed To: 4½" 57470 TA274 26D 72.00 57480 T4A3786 26D 23.00 57475 T4A3386 32D 248.00 For finishes not listed, use $2.00 over 26D price All interim hinges are supplied with NRP set screw and nohole plugs which allow them to be reversible. Leaves are trimmed the same dimension from the top and bottom of that leaf - otherwise a complete special must be manufactured, check for existence of available special part numbers which may have previously been manufactured Specialty s & Residential 400 Staggered Hole Pattern on 4" x 4" 44 /4" Radius Staggered Hole Pattern on 4" x 4" 458 5/8" Radius Staggered Hole Pattern on 4" x 4" Residential s available only in finishes shown above. Contract Grade Discount does not apply to Residential Grade s. NOTE: Unlisted finishes for residential hinges P.O.A. Consult the Factory on minimum requirements. 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 56695 3.00 56689 4 9.00 56683 0B* 2.00 56692 26.00 56288 26D 9.00 56737 0B* 4.00 56748 26D 0.00 56722 3.00 5685 4 9.00 5676 0B* 5.00 5679 26.00 5682 26D 9.00 56775 3.00 56768 4 0.00 56769 0B* 4.00 56772 26.00 56773 26D 0.00 56870 3.00 56865 4 8.00 5686 0B* 2.00 56867 26.00 56868 26D 9.00 5695 0B* 4.00 56922 26D 0.00 *Residential grade 0B. 50 2 26 50 2 26 50 2 26 50 2 52 50 2 26 50 2 52 s Effective April 4, 206 SP- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
2-Knuckle Architectural s 800-46-3007 www.assaabloy.ca *GT and LT tips not available in D4 and 0BE finishes. For options not offered in price book, contact factory. 2-Knuckle s are handed RH or LH DESIGNER HARDWARE FT RT GT* LT* LH RH 78000 7800 Tip Prefix FT GT LT RT Type T273 4" x 4" 0.60 mm x 0.60 mm Tips Book D4 x US4 46.00 D4 x US5 46.00 D4 x US26 46.00 D4 x US26D 46.00 D4 x D4 46.00 0BE x 0BE 46.00 US4 x D4 52.00 US5 x D4 48.00 US26 x D4 52.00 US26D x D4 48.00 US4 x US4 52.00 US4 x US5 52.00 US5 x US4 48.00 US5 x US5 48.00 US26 x US26D 52.00 US26D x US26 48.00 US26 x US26 52.00 US26D x US26D 48.00 LH RH 7800 780 Tip Prefix FT GT LT RT Type TA273 4 2" x 4" 4.30 mm x 0.60 mm Tips Book D4 x US4 66.00 D4 x US5 66.00 D4 x US26 66.00 D4 x US26D 66.00 D4 x D4 66.00 0BE x 0BE 66.00 US4 x D4 79.00 US5 x D4 70.00 US26 x D4 79.00 US26D x D4 70.00 US4 x US4 79.00 US4 x US5 79.00 US5 x US4 70.00 US5 x US5 70.00 US26 x US26D 79.00 US26D x US26 70.00 US26 x US26 79.00 US26D x US26D 70.00 LH RH 78002 78003 Tip Prefix FT GT LT RT Type T273 4 2" x 4" 4.30 mm x 0.60 mm Tips Book D4 x US4 46.00 D4 x US5 46.00 D4 x US26 46.00 D4 x US26D 46.00 D4 x D4 46.00 0BE x 0BE 46.00 US4 x D4 52.00 US5 x D4 48.00 US26 x D4 52.00 US26D x D4 48.00 US4 x US4 52.00 US4 x US5 52.00 US5 x US4 48.00 US5 x US5 48.00 US26 x US26D 52.00 US26D x US26 52.00 US26 x US26 56.00 US26D x US26D 52.00 LH RH 7802 7803 Tip Prefix FT GT LT RT Type TA273 Tips Book D4 x US4 66.00 D4 x US5 66.00 D4 x US26 66.00 D4 x US26D 66.00 D4 x D4 66.00 0BE x 0BE 66.00 US4 x D4 79.00 US5 x D4 70.00 US26 x D4 79.00 US26D x D4 70.00 US4 x US4 79.00 US4 x US5 79.00 US5 x US4 70.00 US5 x US5 70.00 US26 x US26D 79.00 US26D x US26 70.00 US26 x US26 79.00 US26D x US26D 70.00 LH RH 78004 78005 Tip Prefix FT GT LT RT Type T273 73005 - Deco Tip Kit 26.50 Tips Book D4 x US4 46.00 D4 x US5 46.00 D4 x US26 46.00 D4 x US26D 46.00 D4 x D4 46.00 0BE x 0BE 46.00 US4 x D4 52.00 US5 x D4 48.00 US26 x D4 52.00 US26D x D4 48.00 US4 x US4 52.00 US4 x US5 52.00 US5 x US4 48.00 US5 x US5 48.00 US26 x US26D 52.00 US26D x US26 48.00 US26 x US26 52.00 US26D x US26D 48.00 LH RH 7804 7805 Tip Prefix FT GT LT RT Type TA273 x 27 mm x 27 mm Tips Book D4 x US4 92.00 D4 x US5 92.00 D4 x US26 92.00 D4 x US26D 92.00 D4 x D4 92.00 0BE x 0BE 92.00 US4 x D4.00 US5 x D4 99.00 US26 x D4.00 US26D x D4 99.00 US4 x US4.00 US4 x US5.00 US5 x US4 99.00 US5 x US5 99.00 US26 x US26D.00 US26D x US26 99.00 US26 x US26.00 US26D x US26D 99.00 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-
DESIGNER HARDWARE 800-46-3007 www.assaabloy.ca 3-Knuckle Architectural s *GT and LT tips not available in D4 and 0BE finishes.for options not offered in price book, contact factory. FT RT GT* LT* Tips Book Tips Book Tip Prefix FT GT LT RT 7806 Type T74 4" x 4" 0.60 mm x 0.60 mm D4 x US4 43.00 D4 x US5 43.00 D4 x US26 43.00 D4 x US26D 43.00 D4 x D4 43.00 0BE x 0BE 46.00 US4 x D4 46.00 US5 x D4 45.00 US26 x D4 46.00 US26D x D4 45.00 US4 x US4 46.00 US4 x US5 46.00 US5 x US4 45.00 US5 x US5 45.00 US26 x US26D 46.00 US26D x US26 45.00 US26 x US26 46.00 US26D x US26D 45.00 Tip Prefix FT GT LT RT 7809 Type T74 x 27 mm x 27 mm D4 x US4 7.00 D4 x US5 7.00 D4 x US26 7.00 D4 x US26D 7.00 D4 x D4 7.00 0BE x 0BE 7.00 US4 x D4 86.00 US5 x D4 73.00 US26 x D4 86.00 US26D x D4 73.00 US4 x US4 86.00 US4 x US5 86.00 US5 x US4 73.00 US5 x US5 73.00 US26 x US26D 86.00 US26D x US26 73.00 US26 x US26 86.00 US26D x US26D 73.00 Tip Prefix FT GT LT RT 7807 Type T74 4 2" x 4" 4.30 mm x 0.60 mm Tips Book D4 x US4 46.00 D4 x US5 46.00 D4 x US26 46.00 D4 x US26D 46.00 D4 x D4 46.00 0BE x 0BE 46.00 US4 x D4 54.00 US5 x D4 50.00 US26 x D4 54.00 US26D x D4 50.00 US4 x US4 54.00 US4 x US5 50.00 US5 x US4 54.00 US5 x US5 50.00 US26 x US26D 54.00 US26D x US26 50.00 US26 x US26 54.00 US26D x US26D 50.00 Tip Prefix FT GT LT RT 78020 Type TA74 4" x 4" 0.60 mm x 0.60 mm Tips Book D4 x US4 64.00 D4 x US5 64.00 D4 x US26 64.00 D4 x US26D 64.00 D4 x D4 64.00 0BE x 0BE 64.00 US4 x D4 7.00 US5 x D4 64.00 US26 x D4 7.00 US26D x D4 64.00 US4 x US4 7.00 US4 x US5 7.00 US5 x US4 64.00 US5 x US5 64.00 US26 x US26D 7.00 US26D x US26 64.00 US26 x US26 7.00 US26D x US26D 64.00 Tip Prefix FT GT LT RT 7808 Type T74 Tips Book D4 x US4 46.00 D4 x US5 46.00 D4 x US26 46.00 D4 x US26D 46.00 D4 x D4 46.00 0BE x 0BE 46.00 US4 x D4 54.00 US5 x D4 50.00 US26 x D4 54.00 US26D x D4 50.00 US4 x US4 54.00 US4 x US5 54.00 US5 x US4 50.00 US5 x US5 50.00 US26 x US26D 54.00 US26D x US26 50.00 US26 x US26 54.00 US26D x US26D 50.00 Tip Prefix FT GT LT RT 7802 Type TA74 4 2" x 4" 4.30 mm x 0.60 mm Tips Book D4 x US4 66.00 D4 x US5 66.00 D4 x US26 66.00 D4 x US26D 66.00 D4 x D4 66.00 0BE x 0BE 66.00 US4 x D4 66.00 US5 x D4 62.00 US26 x D4 66.00 US26D x D4 62.00 US4 x US4 66.00 US4 x US5 62.00 US5 x US4 62.00 US5 x US5 62.00 US26 x US26D 66.00 US26D x US26 62.00 US26 x US26 66.00 US26D x US26D 62.00 s Effective April 4, 206 DH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
3-Knuckle Architectural s Tip Prefix FT GT LT RT 78022 Type TA74 Tip Prefix FT GT LT RT 78023 Type TA74 x 27 mm x 27 mm Tips Tips Book D4 x US4 66.00 D4 x US5 66.00 D4 x US26 66.00 D4 x US26D 66.00 D4 x D4 66.00 0BE x 0BE 66.00 US4 x D4 66.00 US5 x D4 62.00 US26 x D4 66.00 US26D x D4 62.00 US4 x US4 66.00 US4 x US5 66.00 US5 x US4 62.00 US5 x US5 62.00 US26 x US26D 66.00 US26D x US26 62.00 US26 x US26 66.00 US26D x US26D 62.00 Book D4 x US4 87.00 D4 x US5 87.00 D4 x US26 87.00 D4 x US26D 87.00 D4 x D4 87.00 0BE x 0BE 87.00 US4 x D4 07.00 US5 x D4 89.00 US26 x D4 07.00 US26D x D4 89.00 US4 x US4 07.00 US4 x US5 07.00 US5 x US4 89.00 US5 x US5 89.00 US26 x US26D 07.00 US26D x US26 89.00 US26 x US26 07.00 US26D x US26D 89.00 5-Knuckle Architectural s 5-Knuckle Architectural s only available with Standard Pin and Plug. For options not offered in price book, contact factory. 800-46-3007 www.assaabloy.ca *GT and LT tips not available in D4 and 0BE finishes. For options not offered in price book, contact factory. Tips Book D4 x US4 25.00 D4 x US5 25.00 D4 x US26 25.00 D4 x US26D 25.00 D4 x D4 25.00 Type 0BE x 0BE 25.00 US3 x US3 0.00 US4 x D4 25.00 TA786 US5 x D4 0.00 US26 x D4 25.00 US26D x D4 0.00 US4 x US5 25.00 US5 x US4 0.00 US4 x US4 25.00 US5 x US5 0.00 US26 x US26D 25.00 US26D x US26 0.00 US26 x US26 25.00 US26D x US26D 0.00 Tips Book Order by Description Tip Prefix FT Order by Description Tip Prefix FT Type TA786 x 27 mm x 27 mm D4 x US4 52.00 D4 x US5 52.00 D4 x US26 52.00 D4 x US26D 52.00 D4 x D4 52.00 0BE x 0BE 52.00 US4 x D4 52.00 US5 x D4 45.00 US26 x D4 52.00 US26D x D4 45.00 US4 x US5 52.00 US5 x US4 45.00 US4 x US4 52.00 US5 x US5 45.00 US26 x US26D 52.00 US26D x US26 45.00 US26 x US26 52.00 US26D x US26D 45.00 DESIGNER HARDWARE 78024 Type T274 4" x 4" 0.60 mm x 0.60 mm Tips Book D4 x US4 28.00 D4 x US5 28.00 D4 x US26 28.00 D4 x US26D 28.00 D4 x D4 28.00 0BE x 0BE 28.00 US4 D4 29.00 US5 x D4 28.00 US26 x D4 29.00 US26D x D4 28.00 US4 x US4 29.00 US4 x US5 29.00 US5 x US4 28.00 US5 x US5 28.00 US26 x US26D 29.00 US26D x US26 28.00 US26 x US26 29.00 US26D x US26D 28.00 78025 Type T274 4 2" x 4" 4.30 mm x 0.60 mm Tips Book D4 x US4 3.00 D4 x US5 3.00 D4 x US26 3.00 D4 x US26D 3.00 D4 x D4 3.00 0BE x 0BE 3.00 US4 x D4 33.00 US5 x D4 3.00 US26 x D4 33.00 US26D x D4 3.00 US4 x US4 33.00 US4 x US5 33.00 US5 x US4 3.00 US5 x US5 3.00 US26 x US26D 33.00 US26D x US26 3.00 US26 x US26 33.00 US26D x US26D 3.00 Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-3
DESIGNER HARDWARE 800-46-3007 www.assaabloy.ca 5-Knuckle Architectural s (Continued) 5-Knuckle Architectural s only available with Standard Pin and Plug. For options not offered in price book, contact factory. 78026 Type T274 Tips Book D4 x US4 3.00 D4 x US5 3.00 D4 x US26 3.00 D4 x US26D 3.00 D4 x D4 3.00 0BE x 0BE 3.00 US4 x D4 33.00 US5 x D4 3.00 US26 x D4 33.00 US26D x D4 3.00 US4 x US4 33.00 US4 x US5 33.00 US5 x US4 3.00 US5 x US5 3.00 US26 x US26D 33.00 US26D x US26 3.00 US26 x US26 33.00 US26D x US26D 3.00 78027 Type T274 x 27 mm x 27 mm Tips Book D4 x US4 45.00 D4 x US5 45.00 D4 x US26 45.00 D4 x US26D 45.00 D4 x D4 45.00 0BE x 0BE 45.00 US4 x D4 46.00 US5 x D4 42.00 US26 x D4 46.00 US26D x D4 42.00 US4 x US4 46.00 US4 x US5 46.00 US5 x US4 42.00 US5 x US5 42.00 US26 x US26D 46.00 US26D x US26 42.00 US26 x US26 46.00 US26D x US26D 42.00 78028 Type TA274 4" x 4" 0.60 mm x 0.60 mm Tips Book D4 x US4 44.00 D4 x US5 44.00 D4 x US26 44.00 D4 x US26D 44.00 D4 x D4 44.00 0BE x 0BE 44.00 US4 x D4 50.00 US5 x D4 40.00 US26 x D4 50.00 US26D x D4 40.00 US4 x US4 50.00 US4 x US5 50.00 US5 x US4 40.00 US5 x US5 40.00 US26 x US26D 50.00 US26D x US26 40.00 US26 x US26 40.00 US26D x US26D 40.00 78030 Type TA274 Tips Book D4 x US4 45.00 D4 x US5 45.00 D4 x US26 45.00 D4 x US26D 45.00 D4 x D4 45.00 0BE x 0BE 45.00 US4 x D4 46.00 US5 x D4 42.00 US26 x D4 46.00 US26D x D4 42.00 US4 x US4 46.00 US4 x US5 46.00 US5 x US4 42.00 US5 x US5 42.00 US26 x US26D 46.00 US26D x US26 42.00 US26 x US26 46.00 US26D x US26D 42.00 Tips Book Tips Book 78029 Type TA274 4 2" x 4" 4.30 mm x 0.60 mm D4 x US4 45.00 D4 x US5 45.00 D4 x US26 45.00 D4 x US26D 45.00 D4 x D4 45.00 0BE x 0BE 45.00 US4 x D4 46.00 US5 x D4 42.00 US26 x D4 46.00 US26D x D4 42.00 US4 x US4 46.00 US4 x US5 43.00 US5 x US4 42.00 US5 x US5 42.00 US26 x US26D 46.00 US26D x US26 42.00 US26 x US26 46.00 US26D x US26D 42.00 7803 Type TA274 x 27 mm x 27 mm D4 x US4 64.00 D4 x US5 64.00 D4 x US26 64.00 D4 x US26D 64.00 D4 x D4 64.00 0BE x 0BE 64.00 US4 x D4 7.00 US5 x D4 67.00 US26 x D4 67.00 US26D x D4 67.00 US4 x US4 7.00 US4 x US5 7.00 US5 x US4 67.00 US5 x US5 67.00 US26 x US26D 7.00 US26D x US26 67.00 US26 x US26 7.00 US26D x US26D 67.00 s Effective April 4, 206 DH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Square Barrel s s are handed, offered in standard weight only, and cannot be electrified. For options not offered in price book, contact factory. Product LH RH 75840 75842 75844 75742 75846 75744 7584 75843 75845 75743 75847 75745 800-46-3007 www.assaabloy.ca Type SQ333 Book 3 34.00 0B 34.00 0BE 34.00 4 34.00 5 24.00 26 34.00 26D 24.00 DESIGNER HARDWARE Olive Knuckle s s are handed, offered in standard weight only, and cannot be electrified. For options not offered in price book, contact factory. Product LH RH Type Book 76204 76204NL 76206 76208 76200 7620 76202 76205 76205NL 76207 76209 7620 762 76203 TA3383 6" 52.40 mm x 52.40 mm 3 248.00 3NL 244.00 0B 274.00 0BE 248.00 4 248.00 5 244.00 26 248.00 26D 244.00 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-5
ALUMINUM CONTINUOUS GEARED HINGES 800-46-3007 www.assaabloy.ca Listing: R2248 C US McKINNEY aluminum continuous hinges have been tested and certified by Underwriters Laboratories, Inc. (U.S.A. and Canada) for up to a 3-hour (A Label) Fire Listing for all 4'0" x 0'0" and 8'0"x 0'0" door LISTED and frame assemblies. Fire listing certification applies to all approved hollow metal and wood door assemblies in dry wall or masonry wall construction. No special preparations are required for up to 90 minutes. Fire Pins, which also increase the security of the door are required for 3-hour applications. Fire Pin applications fall within the UL guidelines for retrofitting assemblies in the field. Cutting the hinge in the field will not void the UL listing. Drilling locations for Fire Pins are found on each template. The most up to date templates are found on our web site at www.mckinneyhinge.com All models are approved for UL retrofit applications per NFPA 80. These hinges conform to ANSI / BHMA Standard A56.26-2000: Grade 2-50 (50 # Door @,500,000 cycles) Grade 2-300 (300 # Door @ 500,000 cycles) Grade -300 (300 # Door @,000,000 cycles ) Grade -600 (600 # Door @ 500,000 cycles) Available Options: (Consult individual pages for availability of option with profile listed) Current Carrying s: QC4 cable will carry 6 amps continuous at 24 volts in-rush for 820 milliseconds. When ordering, please specify where the modification is to be located from the top of the hinge down to the centerline of prep. Handing is required on all hinges provided with electrical modifications. Molex connectors with ElectroLynx are is warranted for 5 years. Molex connectors are included at each leaf for ease of electrical connection. electrical prep is supplied with a 80" cable lead. QC hinges are available with additional options, SER (Serviceable) and ACC (Accessible). MM Magnetic Monitoring Transfer also available with SER and ACC Options. QC ElectroLynx Connectors also available with SER (Serviceable) and ACC (Accessible) Options. EPT Power Transfer Prep (Cut Out Only) for Von Duprin. See page CH-0 for location template. This template must be filled out and included with your order. PT Power Transfer Prep (Cut Out Only) for Securitron, Yale, Centurion, Dorma or Adams Rite. Refer to page CH-0 for location template. This template must be filled out and included with your order. Custom Cut to Length (s may be field cut and not void listing. Field-Cut hinges should be cut from bottom) Fire Pins Kit While hinges are rated without fire pins up to 90 minutes, 3-hour ratings require the use of fire pins. Fire pin kit consists of 4 each for 80-95 inch hinges and 5 each for 96 to 20 inch hinges, as well as the installation instructions on what size holes to drill after the hinges have been installed. Hospital Type Tips are available on full mortise hinges Specify K pre-fix for Kawneer Tuffline Series Aluminum Doors on our MCK-2HD Series, order as K-MCK- 2HD and include size and finish Painted Colors Gear Cap Only - Batch charge and additional charge per hinge Complete - Batch charge and additional charge per hinge (minimum run 20 hinges) POA Lengths McKINNEY aluminum continuous geared hinges are listed and priced here in 79", 83", 8, 9 and 20" actual lengths for ease of installation on standard nominal door openings. The actual length of the hinge provides for head and threshold clearance. Custom lengths may be ordered as a special run. Consult the factory regarding minimum requirements and noncancellation policy on custom lengths. s may be cut to appropriate length in the field. The hinge should be installed with the cut side on the bottom. Cutting in the field does not void the listing. We recommend that after removing cap, a saw blade be used to score and always begin cut at gear head. Never at leaves. Cut only from bottom of hinge. Do not cut through bearings or screw holes. s Effective April 4, 206 CG- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
2HD - 4HD - 25HD Option SN - Satin Nickel 43.00 over CL G - Gold Anodized Same as BZ BL - Black Anodized 20% over BZ QC-4* 56.00 QC-8* 705.00 QC-2* 792.00 ACC-4* 56.00 ACC-8* 705.00 ACC-2* 792.00 SER-4* 56.00 SER-8* 705.00 SER-2* 792.00 MM* 35.00 EPT Prep for Von Duprin 74.00 PT 74.00 HT* 93.00 Custom Cut to Length* 3.00 FIREPIN-C4 (For 80"-9 hinge) 73.00 FIREPIN-C5 (For 96"-20" hinge) 79.00 Dutch Door Prep* 02.00 Painted Colors P.O.A. For QC-2 order one of each of the above Fastener Kits (one kit required up to 9 2 kits for 20") FMK-CL (7502) 33.00 FMK-BZ (7503) 33.00 Torx Screws 3.00 PBS250SP0R2 wood screw pack (2 ea per bag).00 Replacement SER Sections 2HD Option 9404 SER-4 CL Section 22.00 9405 SER-4 BZ Section 22.00 9406 SER-8 CL Section 254.00 9407 SER-8 BZ Section 254.00 9408 SER-2 CL Section 389.00 9409 SER-2 BZ Section 389.00 800-46-3007 www.assaabloy.ca 22HD - 54HD - 58HD Option SN - Satin Nickel 43.00 over CL G - Gold Anodized Same as BZ BL - Black Anodized 20% over BZ QC-4* 56.00 QC-8* 590.00 QC-2* 754.00 HT* 93.00 Custom Cut to Length* 3.00 FIREPIN-C4 (For 80"-9 hinge) 73.00 FIREPIN-C5 (For 96"-20" hinge) 79.00 Painted Colors P.O.A. For QC-2 order one of each of the above C Repl Cover 22HD CL 90.00 D Repl Cover 22HD BZ 90.00 C Repl Cover 54HD CL 90.00 D Repl Cover 54HD BZ 90.00 C293C Repl Cover 58HD 90.00 D293D Repl Cover 58HD 90.00 Specify length 22HD & 54HD Fastener Kits (one kit required up to 9 2 kits for 20") Option FSHSK-CL (77350) 33.00 FSHSK-BZ (7735) 33.00 58HD Option 58K-CL (77348) 33.00 58K-BZ (77349) 33.00 ALUMINUM CONTINUOUS GEARED HINGES When ordering advise location for electrical options from top of hinge to center-line of electrical prep location. Handing is required for hinges with electrical prep. * Handing Required Refer to pages CH-0 for the appropriate power transfer locator template. This template must be filled out and included with your order. Gold or other custom finishes may have 6-8 week lead time. s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CG-2
ALUMINUM CONTINUOUS GEARED HINGES Product 800-46-3007 www.assaabloy.ca FullMortiseEdgeHungFlushDoor MCK-2HD Heavy Duty Crtn Crtn 79" 7676 CLEAR 242.00 79" 7674 BRONZE 32.00 83" 7677 CLEAR 242.00 83" 76742 BRONZE 32.00 8 7678 CLEAR 242.00 8 8 76743 BRONZE 32.00 9 7679 CLEAR 278.00 9 76744 BRONZE 377.00 20" 76720 CLEAR 459.00 20" 76745 BRONZE 604.00 K-MCK-2HD For Kawneer Tuffline Series Aluminum Doors, pre-fix the MCK-2HD series with K, example 83" K-MCK-2HD CL Full Mortise Edge Hung Inset Door MCK-22HD Heavy Duty Product Crtn Crtn 79" 7677 CLEAR 366.00 79" 76796 BRONZE 435.00 83" 76772 CLEAR 366.00 83" 76797 BRONZE 435.00 8 76773 CLEAR 366.00 8 76798 BRONZE 435.00 9 76774 CLEAR 43.00 9 76799 BRONZE 57.00 2 20" 76775 CLEAR 698.00 20" 76800 BRONZE 783.00 4 Complete installation hardware kit which includes 2-24 x 7 6" Phillips, Flat Head Undercut, Zinc screws for frame leaf, and thru bolts and shoulder screws for the door leaf are provided as standard pack unless otherwise specified. Product Product Product MCK-4HD Heavy Duty MCK-WTHD Heavy Duty 83" 76826 CLEAR 242.00 83" 76822 CLEAR 54.00 83" 76823 BRONZE 743.00 9 76824 CLEAR 743.00 9 76825 BRONZE 97.00 79" 7675 CLEAR 242.00 79" 76776 BRONZE 32.00 83" 76752 CLEAR 242.00 83" 76777 BRONZE 32.00 8 76753 CLEAR 242.00 8 76778 BRONZE 32.00 9 76754 CLEAR 293.00 9 76779 BRONZE 377.00 20" 76755 CLEAR 459.00 20" 76780 BRONZE 604.00 Crtn Crtn Crtn Crtn Crtn 8 Crtn 8 MCK-25HD Heavy Duty Product Product MCK-28HD Heavy Duty Available Options: To order, specify length and finish. s are supplied with # 2-24 x 7 6" Flat Head Undercut, Type C, thread-forming screws. Option (Suffix) Crtn Crtn Crtn Crtn Net Add Custom Cut to Length* 3.00 Fire Pin Kit: FIREPIN-C4 (For 80"-9 hinge) 73.00 FIREPIN-C5 (For 96"-20" hinge) 79.00 Painted Colors: Gear Cap Only Complete * Requires Handing 79" 76706 CLEAR 247.00 9 79" 7673 BRONZE 32.00 9 83" 76707 CLEAR 247.00 9 83" 76732 BRONZE 32.00 9 8 76708 CLEAR 247.00 9 8 76733 BRONZE 32.00 9 9 76709 CLEAR 299.00 0 9 76734 BRONZE 384.00 0 20" 7670 CLEAR 478.00 5 20" 76735 BRONZE 622.00 5 83" 76920 CLEAR 363.00 0 83" 76924 BRONZE 442.00 0 8 7692 CLEAR 367.00 0 8 76925 BRONZE 446.00 0 9 76922 CLEAR 446.00 9 76926 BRONZE 546.00 20" 76923 CLEAR 684.00 4 20" 76927 BRONZE 667.00 4 Fire Pins are required on 3 hour rated doors only. Full Mortise Safety s MCK-35HD...Same Pricing as MCK-2HD MCK-38HD...Same Pricing as MCK-2HD P.O.A P.O.A. s Effective April 4, 206 CG-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.
Continuous s Full Surface MCK-54HD Heavy Duty Crtn Crtn 79" 7676 CLEAR 356.00 0 79" 76786 BRONZE 442.00 83" 76762 CLEAR 356.00 83" 76787 BRONZE 442.00 8 76763 CLEAR 356.00 8 76788 BRONZE 442.00 9 76764 CLEAR 437.00 9 76789 BRONZE 529.00 20" 76765 CLEAR 624.00 4 20" 76790 BRONZE 866.00 800-46-3007 www.assaabloy.ca MCK-58HD Heavy Duty Crtn Crtn 79" 768 CLEAR 343.00 79" 7682 BRONZE 408.00 83" 7683 CLEAR 366.00 83" 7684 BRONZE 435.00 8 7685 CLEAR 356.00 8 7686 BRONZE 42.00 9 7687 CLEAR 372.00 2 9 7688 BRONZE 487.00 20" 7689 CLEAR 649.00 4 20" 76820 BRONZE 73.00 ALUMINUM CONTINUOUS GEARED HINGES Complete installation hardware kit which includes 2-24 x 7 6" selftapping, Phillips, Flat Head Undercut, Zinc screws for frame leaf, and thru bolts and shoulder screws for the door leaf are provided as standard pack unless otherwise specified. Complete installation hardware kit which includes 2-24 x 7 6" x #0 head, Thread-Forming, Flat Head Undercut screw for the frame leaf. Door leaf fasteners are 4"-20 shoulder bolts and thru bolts for 3 4" door. Available Options: Option (Suffix) Refer to Page CG-3 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CG-4
Door Security Solutions Canada 60 Four Valley Drive Vaughan, ON L4K 4T9 800-46-3007 www.assaabloy.ca Copyright 988-206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 5300 4/206