HDSM-41x/4x.9 (1.mm) Single digit surface mount LED display Datasheet Description This is.9 (1.mm) height single digit display. This device utilizes AlInGaP / GaAs chips.this device is with top surface gray and white segments. Ordering Information Package Dimensions Features.9 digit height Low current operation Excellent characters appearance Available in CA and CC 1 pieces per reel Moisture Sensitivity Level: Level 4 RoHS compliant Red Green Yellow Orange Description HDSM-41C HDSM-41H HDSM-41F HDSM-41L Common Anode, Right Hand Decimal HDSM-4C HDSM-4H HDSM-4F HDSM-4L Common Cathode, Right Hand Decimal Note: 1. All dimensions are in millimeters. 2. Tolerance are +/-.25mm unless otherwise specified.
Pin Connection (Common Anode) PIN No Connection 1 Cathode E 2 Cathode D Common Anode 4 Cathode C 5 Cathode DP 6 Cathode B 7 Cathode A 8 Common Anode 9 Cathode F 1 Cathode G Pin Connection (Common Cathode) PIN No Connection 1 Anode E 2 Anode D Common Cathode 4 Anode C 5 Anode DP 6 Anode B 7 Anode A 8 Common Cathode 9 Anode F 1 Anode G Internal Circuit Diagram (Common Anode) Internal Circuit Diagram (Common Cathode).8.8 A B C D E F G DP A B C D E F G DP 7 6 4 2 1 9 1 5 7 6 4 2 1 9 1 5 Absolute Maximum Ratings @ T A =25 Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mw Peak Forward Current Per Segment ( 1/1 Duty Cycle.,.1ms pulse width) Continuous Forward Current Per Segment Derating Linear From 25 C Per Segment 1 ma 25 ma.25 ma/ C Reverse Voltage Per Segment 5 V Operating Temperature Range Storage Temperature Range -4 C to +15 C -4 C to +15 C
Electrical / Optical Characteristics @ T A =25 C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 5.4 9 - Mcd I F = 1mA Emissions Wavelength l p /l d - 572/571 - Nm I F = 2mA Spectral Line Half-Width Dl - 2 - Nm I F = 2mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 2mA Reverse Current, Per Segment I R - 1 ma V R = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 1mA Yellow Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 15 - Mcd I F = 1mA Emissions Wavelength l p /l d - 591/589 - Nm I F = 2mA Spectral Line Half-Width Dl - 15 - Nm I F = 2mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 2mA Reverse Current, Per Segment I R - 1 ma V R = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 1mA Red Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 14. - Mcd I F = 1mA Emissions Wavelength l p /l d - 644/6 - Nm I F = 2mA Spectral Line Half-Width Dl - 2 - Nm I F = 2mA Forward Voltage, Per Segment V F - 2. 2.6 V I F = 2mA Reverse Current, Per Segment I R - 1 ma V R = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 1mA Orange Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 16 - Mcd I F = 1mA Emissions Wavelength l p /l d - 611/65 - Nm I F = 2mA Spectral Line Half-Width Dl - 17 - Nm I F = 2mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 2mA Reverse Current, Per Segment I R - 1 ma V R = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 1mA
Typical Electrical / Optical characteristic curves @ T A =25 C Green 1. G 4 G Relative Luminous Intensity.5 Relative Luminous Intensity (Normalized to 1 at 1mA) 2 1 4 45 5 55 6 65 7 Wavelength(nm) 5 1 15 2 25 Forward Current I F (ma) 5 4 45 5 Figure 1. Relative Luminous Intensity vs. Wavelength Figure 2. Relative Luminous Intensity vs. Forward Current 4 4 G 2 1 G. 2 1 1 2 4 5 6 7 8 9 1 11 1.2 Ambient Temperature( C) 1.6 2. 2.4 2.8.2 Forward Voltage(V) Figure. Allowable DC Current vs. Ambient Temperature Figure 4. Forward Current vs. Forward Voltage
Yellow 1. 4 Relative Intensity.5 Relative Intensity (Normalized to 1 at 1mA) 2 1 4 45 5 55 6 65 7 5 1 15 2 25 5 4 45 5 Wavelength(nm) Forward Current I F (ma) Figure 1. Relative Intensity vs. Wavelength Figure 2. Relative Intensity vs. Forward Current 4 4 2 1 2 1 1 2 4 5 6 7 8 9 1 11 Ambient Temperature( C) Figure. Allowable DC Current vs. Ambient Temperature 1. 1.5 2. 2.5..5 Forward Voltage(V) Figure 4. Forward Current vs. Forward Voltage
Red 1. R 4 R Relative Luminous Intensity.5 Relative Luminous Intensity (Normalized to 1 at 1mA) 2 1 4 45 5 55 6 65 7 5 1 15 2 25 5 4 45 5 Wavelength(nm) Forward Current I F (ma) Figure 1. Relative Luminous Intensity vs. Wavelength Figure 2. Relative Luminous Intensity vs. Forward Current 4 4 R 2 1 R 2 1 1 2 4 5 6 7 8 9 1 11 1.2 1.6 2. 2.4 2.8.2 Ambient Temperature( C) Figure. Allowable DC Current vs. Ambient Temperature Forward Voltage(V) Figure 4. Forward Current vs. Forward Voltage
Orange 1. 4 Relative Intensity.5 Relative Intensity (Normalized to 1 at 1mA) 2 1 45 5 55 6 65 7 75 5 1 15 2 25 5 4 45 5 Wavelength(nm) Forward Current I F (ma) Figure 1. Relative Intensity vs. Wavelength Figure 2. Relative Intensity vs. Forward Current 4 4 2 1 2 1 1 2 4 5 6 7 8 9 1 15 1. Ambient Temperature( C) 1.5 2. 2.5..5 Forward Voltage(V) Figure. Allowable DC Current vs. Ambient Temperature Figure 4. Forward Current vs. Forward Voltage
Intensity Bin Limits (mcd) Green IV Bin Category Min. Max. M 5.41 8.6 N 8.61 1.7 P 1.71 21.8 Tolerance: ±15% Yellow IV Bin Category Min. Max. N 8.61 1.7 P 1.71 21.8 Q 21.81 4.7 Tolerance: ±15% Red IV Bin Category Min. Max. N 8.61 1.7 P 1.71 21.8 Q 21.81 4.7 Tolerance: ±15% Orange IV Bin Category Min. Max. N 8.61 1.7 P 1.71 21.8 Q 21.81 4.7 R 4.71 55.2 Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. SMT Soldering Profile Pb free reflow soldering Profile Recommended soldering pattern (unit: mm) 1.9 x 4 = 7.6 1 to SEC. TEMPERATURE 217 C 2 C 15 C 255-26 C C/SEC. MAX. C/SEC. MAX. 6-12 SEC. 6 C/SEC. MAX. 1 SEC. MAX.. 1.65 15. TIME (Acc. to J-STD-2C) Notes: Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between the first and than second soldering process.
Tape specification (unit: mm) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 25-28 Avago Technologies. All rights reserved. AV2-78EN - July 9, 28