Ω LOK Ω LOK - Distribution locks The TEKNOMEG Ω LOK range is quite complete and includes terminal board distribution units, both single block and compact. This allows making distribution units from up to 0. pplications range from the use in switchboards, automation and command panel boards, distribution panel boards. Terminal board distribution blocks: from to, 2 and 4 pole, to use in applications in which the effective short-circuit current value (Icc eff.), is kept within 10 k. Equipped with a transparent protection screeen between phase and phase, at the bottom of the distribution unit, and frontal, removable to tighten connections. Recently introduced the new 4-Poles Modular Up & Down Distribution lock from, that allows to manage, in a simple and ordered way, situations in which the installer must satisfy articulated mounting needs but contained in the dimensions, for example for the wiring in which inputs and outputs are too many to be placed all on one side. ompact distribution blocks: from to 0, 1 and 3 pole, to use in applications in which the effective short-circuit current value (Icc eff) is higher than 10 k. Registered as per standard UL. Wiring made easy by guided accesses. High electric insulation value. No protection to remove to tighten the connections. Quick distribution unit blocks:, 1 and 2 pole. Quick indirect spring hook-up outputs, efficient and safe. ll the Ω LOK distribution range can be fitted on DIN rail (omega rail) and/or bottom plate using the specific provisions. 31
Ω LOK - Terminal locks Ω LOK 2 ND FROM TO TEHNIL FETURES rass conductors Galvanized steel screws included sulation between phases Front removable protection screen (except RPQ1025) Self-extinguishing insulating structure : UL 94-V0 Quick hook-up on DIN rails ompliant with standards IE 947-1 and IE 947-7-1 Low voltage auxiliary equipment terminal boards for copper conductors //100/125 ode L H P Fix. hole space RP0990 RP -08 1 66 46 51 45 RP0995 RP -07 1 66 46 51 45 RP1000 RP 125-06 1 66 46 51 45 RP1005 RP 125-14 1 132 46 51 112 //100/125/ ode L H P Fix. hole space RPQ09 RPQ -08 1 66 84 50 45 RPQ0985 RPQ -14 1 100 84 50 RPQ0990 RPQ -07 1 66 84 50 45 RPQ0995 RPQ -12 1 100 84 50 RPQ1000 RPQ 125-06 1 66 84 50 45 RPQ1005 RPQ 125-10 1 100 84 50 RPQ1010 RPQ 125-14 1 132 84 50 112 RPQ1015 RPQ -11 1 168 85 70 150 RPQ1016 RPQ -11-U&D 1 176 105 55 163 RPQ1017 RPQ -11 MS 1 176 105 55 163 RPQ1025 RPQ -100 1 98 75 49 55 RPQ1016 RPQ1015: RPQ1016: Separate inputs: easy wiring Version Up & Down: connection of 2 phases on each side Separate inputs Modular depth RPQ1025: ompact 4 pole distribution unit 7 outputs per phase 10 outputs for neutral easy wiring IP20 32
Ω LOK - Distribution locks Quick 1 ND SPRING TIGHTENING Ω LOK TEHNIL FETURES ody made in P 66 Self-extinguishing: UL 94-V0 rass bars able tightening: - for inputs: screws, for output: spring steel system with copper contact Rated intensity: Protection grade IP20 Direct fitting on DIN rails or plate using 4 screws M4 ode Poles RPU5000 - RPU5005 1 pole distribution block with double input and 14 output. LUE or GREY color RPU5010 2 pole distribution block with 7 output. LUE and GREY color D RPU5000 RPU -S-14-10 1 53 47 24 12 RPU5005 RPU -S-14-G 10 1 53 47 24 12 RPU5010 RP -S-7-G 10 2 53 47 24 12 ompliant with standard EN60998 - EN60999 and their subsequent modifications DVNTGES Extremely easy wiring Output with spring tightening Highly reliable and stable connection with: - rigid stripped cable - cable with ferrule ode IN/OUT N able cross-section (mm 2 ) stripped wire with ferrule (Nm) RPU5000 IN 1 1,5 25 1,5 25 2,5 OUT 14 0,5 4 0,5 3,5 - RPU5005 IN 1 1,5 25 1,5 25 2,5 OUT 14 0,5 4 0,5 3,5 - RPU5010 IN 2 1,5 25 1,5 25 2,5 OUT 7 0,5 4 0,5 3,5 - Ui (V) 33
Ω LOK - ompact distribution blocks Ω LOK TEHNIL FETURES ody structure with high dielectric features. Easy wiring operation by: -opening and removable front protection cover - guided access of cables. Milled clamp for input connections by indirect tightening: - high reliability of the connection - flat conductors i.e. flexible and rigid bars are allowed. Effective tightening by means of exhagonal socket set screws. Direct mounting on DIN rail or on steel plate by screws. Unipolar blocks allow adjacent fixing by means of a pre-mounted clip. Unipolar blocks 125- equipped with clamp for parallel interconnection. dex Protection: IP20 ompliant with standard EN 60947-7-1 UL 1059 standard recognized. Materials: sulating body: P 66 UL 94-V0, gray RL 7035 over: P UL 94-V0, transparent yellow onduction block: - Tinned copper (RPU2995-RPU3000-RPU3005-RPU3015) - rass (RPU3010-RPT3000-RPT3005) lamps: Galvanized steel and l alloy Screws : Galvanized steel file n 302208 RPU -6 S RPU 125-8 S RPU -8 S RPU 250-11 S RPU 0-11 S RPT 125-6 S RPT -6 S FROM TO 0 3 POLE FROM 125 TO ode () Weight (Kg) RPU2995 RPU -6 S 1 0,071 66 30 46 RPU3000 RPU 125-8 S 1 125 0,162 75 48 RPU3005 RPU -8 S 1 0,166 75 48 RPU3010 RPU 250-11 S 1 250 0,331 96 97 50 RPU3015 RPU 0-11 S 1 0 0,358 96 97 50 ode () Weight (Kg) RPT3000 RPT 125-6 S 1 125 0,331 75 85 48 RPT3005 RPT -6 S 1 0,354 75 85 48 34
Ω LOK - Tecnical tables ode RP0990 RP0995 RPQ09 RPQ0985 RPQ0990 RPQ0995 RP1000 RP1005 RPQ1000 RPQ1005 RPQ1010 RPQ1015 RPQ1016 RPQ1017 RPQ1025 RPU2995 RPU3000 RPU3005 RPU3010 RPU3015 RPT3000 RPT3005 Type 7 outputs 7 outputs 12 outputs 10 outputs Modular Modular ompact 7 outputs 3 POLE 3 POLE () 125 250 0 125 IN/OUT Stripped wire (mm 2 ) able with ferrule (mm 2 ) Nr ø OUT 1,5 4 1,5 4 4 4 2-3 OUT 1,5 2,5 1,5 2,5 3 3 2-3 OUT 1,5 4 1,5 4 5 4,5 2-3 OUT 1,5 4 1,5 4 4 4 2-3 OUT 1,5 2,5 1,5 2,5 3 3 2-3 OUT 1,5 4 1,5 4 7 4,0 2-3 OUT 1,5 2,5 1,5 2,5 6 3 2-3 OUT 1,5 4 1,5 4 5 4,5 2-3 OUT 10 25 6 16 1 7,5 2-3 OUT 1,5 4 1,5 4 8 4,5 2-3 OUT 4 10 2,5 6 1 6 2-3 OUT 2,5 6 1,5 6 5 5,5 2-3 OUT 10 25 6 16 1 7,5 2-3 OUT 2,5 6 1,5 6 11 5,5 2-3 OUT 2,5 6 1,5 6 5 5,5 2-3 OUT 10 25 6 16 1 7,5 2-3 OUT 2,5 6 1,5 6 7 5,5 2-3 OUT 2,5 6 1,5 6 11 5,5 2-3 IN 10 50 10 50 1 11,5 8-10 OUT 10 35 10 25 3 8,5 2-3 OUT 2,5 16 1,5 16 8 7 2-3 IN 10 50 10 50 1 11,5 8-10 OUT 10 35 10 25 3 8,5 2-3 OUT 2,5 16 1,5 16 8 7 2-3 IN 10 50 10 50 1 11,5 8-10 OUT 10 35 10 25 3 8,5 2-3 OUT 2,5 16 1,5 16 8 7 2-3 IN 6 35 6 25 1 8,5 1,5 OUT 1,5 6 1,5 6 5 5,5 0,8 OUT 1,5 16 1,5 10 2 6 1,5 IN 6 16 6 16 1 6,8 2 OUT 2,5 16 2,5 16 2 6,8 2 OUT 2,5 6 2,5 6 4 4,5 1 IN 10 35 10 35 1 11x9 6 IN/OUT 6 16 6 16 1 8,7x6 3 OUT 2,5 16 2,5 16 8 6,8 3 IN 10 70 10 50 1 13,5x11,5 10 IN/OUT 6 16 6 16 1 8,7x6 3 OUT 2,5 16 2,5 16 8 6,8 3 IN 35 120 35 95 1 16x14 14 OUT 6 35 6 25 2 9 10 OUT 2,5 16 2,5 16 5 6,8 6 OUT 2,5 10 2,5 10 4 6,1 3 IN 95 185 95 120 1 20,5x16 25 OUT 6 35 6 25 2 9 10 OUT 2,5 16 2,5 16 5 6,8 6 OUT 2,5 10 2,5 10 4 6,1 3 IN 10 35 10 35 1 11x9 6 OUT 2,5 16 2,5 16 6 6,8 3 IN 10 70 10 50 1 13,5x11,5 10 OUT 2,5 16 2,5 16 6 6,8 3 (Nm) Icw (k) Ipk (k) Ui (V) 4,2 20 500 4,2 20 500 6 22 9 22 9 22 4,2 24 690 3,0 22 690 4,4 30 690 11 30 690 21 51 690 21 51 690 4,4 30 690 11 30 690 Ω LOK Icc pk = Short-circuit current peak value expressed in k Icw = Effective value of short-circuit current, duration equal to 1 second, expressed in k as per standard IE 947-7-1 Ui = Nominal insulation voltage 35