TSM411 Supercardioid Dynamic Microphone Applications: Snare Drum Rack Toms Percussion Electric/Acoustic Instruments i The TSM411 is a supercardioid, movingcoil dynamic microphone specifically designed for the capture and reinforcement of acoustic percussive instruments. The dual-point, polymer, capsule-suspension system and the supercardioid polar pattern provide vibration isolation and off-axis rejection crucial for on-stage clarity. Neodymium magnetics allow reduced coil mass for transient agility and impedance reduction. Although designed with percussion in mind, excellent results are also obtained when used on most electrical and acoustical instruments. The die-cast metal body and hardened protective steel screen provide rugged durability. Shock-isolating swivel mount is included. CAD Professional Microphones Sales: 800-762-9266 www.cadaudio.com
TSM411 Supercardioid Dynamic Microphone Specifications Operating Principle... Moving coil dynamic Polar Pattern... Supercardioid Frequency Response... 100Hz -15KHz Sensitivity...-56dBV (1.6mV) @ 1 Pa Impedance...310 ohms Dimensions...(see drawing) Weight...7.9oz [0.23Kg] Specifications subject to change without notice. Frequency Response Dimensional Drawing [not shown actual size] Polar Pattern CAD Professional Microphones Sales: 800-762-9266 www.cadaudio.com
D12 Cardioid Dynamic Kick Drum Microphone Applications: Kick drum Floor toms Guitar cabinets Bass cabinets Acoustic bass The D12 is a large-diaphragm, cardioid, moving-coil dynamic microphone specifically designed and carefully equalized for kick drum capture and reinforcement. Special attention has been given to enhancing thump, crack, and click while reducing boxiness. Neodymium magnetics allow reduced coil mass for transient agility and impedance reduction. Although designed for kick drum, excellent results are also obtained when used on floor toms, electric guitar and electric bass cabinets. The die-cast metal body and hardened protective steel screen provide rugged durability. Integrated swivel mount is included. AUDIO CAD Audio
D12 Cardioid Dynamic Kick Drum Microphone Specifications Operating Principle... Moving-coil dynamic Polar Pattern... Cardioid Frequency Response... 30Hz -12KHz Sensitivity...-66dBV (0.5mV) @ 1 Pa Impedance... 60 ohms Dimensions...(see drawing) Weight...1lb 4oz [0.56Kg] RF Immunity... Meets or exceeds EN55103-2, E1-E4 RoHS... Compliant AMPLITUDE +20 +10 0dB -10-20 Frequency Response 20 50 100 200 500 1K 2 5 10 20K FREQUENCY IN HERTZ Polar Pattern Specifications subject to change without notice. 330 0 30 300 60 Dimensional Drawing [not shown actual size] 270 90 2.9" [74mm] 240-10 120 0dB 210 150 180 AMPLITUDE VS. ANGLE 1 KHz D12 4.6" [117mm] KICK 4.9" [125mm] AUDIO CAD Audio
GXL1200 Cardioid Instrument Microphone Packaged in a small, rugged, all metal housing, the GXL1200 Condenser microphone provides a transparent sound reproduction. The transformerless design of this instrument microphone allows it to have low distortion and optimum low end frequency response. The GXL1200's size, accurate sound reproduction, and high SPL capability, make this a great choice for miking overheads, high hats, cymbals, woodwinds and stringed instruments. CAD Quality The GXL1200 microphones are audio tested and inspected under the direction of CAD Professional Microphones, offering an exceptional level of value. Specifications Generating Element: Externally Biased Condenser Polar Pattern: Unidirectional (Cardioid) Frequency Response: 30 Hz - 20 khz Sensitivity: -56dB 0dB=1V/uBar @ 1kHz Impedance: Low (Less than 200 Ohms) Equivalent Noise Level: +14dB (A-weighted) Power: P24V or P48V Phantom Power Connector: 3 pin XLR Phasing: Positive pressure on diaphragm generates a positive voltage on pin #2 relative to pin #3 Dimensions: See Drawing Weight: 126 Grams 5.325 Ø0.880 GXL1200 Ø0.880 Ø0.787 0.87