FMSW6129 DATA SHEET. SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA.

Similar documents
FMSW6097 DATA SHEET. SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA.

FMSW6124 DATA SHEET. Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.

SEMS-4079-SP8T-SMA DATA SHEET

SA26B-10 DATA SHEET. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body.

SDA SMA DATA SHEET

SA18N-20 DATA SHEET. 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body.

FMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA.

SPA SMA DATA SHEET

SLA SMA DATA SHEET

FMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:

FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm.

FMSN3902 DATA SHEET. USB Frequency Synthesizer PLL (Phase Locked Loop), Operating From 5 GHz to 10 GHz With SMA Output. Features: Applications:

FMPB1002 DATA SHEET. Coaxial RF GS Probe with 800 Micron Pitch Up to 20 GHz with 3.5mm Interface and Cable Mount. Configuration: Features:

SC6015 DATA SHEET. BNC Female Bulkhead Connector Crimp/Solder Attachment For.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable

Frequency Divider, Divide by 2 Prescaler Module, 500 MHz to 18 GHz, Field Replaceable SMA

Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch

Series CCT-38S/CT-38S Multi-Throw DC 18 GHz/DC-22 GHz Normally Open Coaxial Switch

Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch

Series CCT-59S/CT-59S Multi-Throw DC-26.5 GHz Latching Coaxial Switch

Series CCT-38S Multi-Throw DC 12 GHz, SP7T & SP8T Normally Open Coaxial Switch

Series CCR-39S/CR-39S Multi-Throw DC-18 GHz/DC-22 GHz Latching Coaxial Switch

SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch

PAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX

Series CCS-19 Multi-Throw DC-2 GHz Latching Coaxial Switch

Series CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch

Series CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Latching SPDT Coaxial Switch

RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].

Series CCT-59S Multi-Throw DC-18 GHz, SP7T & SP8T Latching Coaxial Switch, Internal 50Ω Termination

RESISTIVE POWER SPLITTERS AND DIVIDERS

Series CCR-58S/CR-58S Multi-Throw DC 26.5 GHz Normally Open Coaxial Switch

Series CCS-37S/CS-37S Miniature DC 18 GHz Failsafe TRANSFER Coaxial Switch

Series CCRT-53S/CRT-53S Internal 50Ω Termination DC-26.5 GHz Failsafe SPDT Coaxial Switch

Series CCS-37K/CS-37K Miniature DC 36 GHz Latching TRANSFER Coaxial Switch

Standard Custom Electro-Mechanical Switches

Series CCP-32N Low PIM DC 3 GHz Latching SPDT Coaxial Switch

HMC241AQS16 / 241AQS16E

Series CCP-47N Low PIM DC 3 GHz Latching TRANSFER Coaxial Switch

Series CCS-47/CS-47 High Power DC 12 GHz Failsafe TRANSFER Coaxial Switch

SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55

Standard Custom Electro-Mechanical Switches

High-Reliability and Environment Qualified Components

Series CCRS-33S/CRS-33S Miniature DC 18 GHz Failsafe 2P3T Coaxial Switch

Series CCS-32/CS-32 High Power DC 12 GHz Failsafe SPDT Coaxial Switch

QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400

Standard Custom Electro-Mechanical Switches

TITANIUM SERIES R 51 PART NUMBER SELECTION. High Performance Multiport Switches. Our Most Important Connection is with You.

Series CCR-33S/CR-33S Miniature DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch

Series CCR-48K/CR-48K Multi-Throw DC 40 GHz Normally Open Coaxial Switch

Features OBSOLETE. = +5V in a 50 Ohm System. Parameter Frequency Min. Typ. Max. Units DC GHz DC GHz

Couplers with Connectors (H Type)

Series CCR-33K/CR-33K Miniature DC 33.5 GHz Failsafe SPDT Coaxial Switch

Cable Attachment Method (Shield/Contact) Size Length, in [mm] 0.98 [24.89] Width/Dia., in [mm] [9.53]. Weight, lbs [g] 0.02 [9.07] 3.

MADP Solderable AlGaAs Flip Chip PIN. Features. Chip Dimensions. Description. Applications

Features. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 13 db

RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402

Stocked Electro-Mechanical Switches

Coaxial Line Stretchers

Coaxial Line Stretchers

Mini Circuits SMA Attenuators

Series CCS-37S/CS-37S Miniature DC 18 GHz Latching TRANSFER Coaxial Switch

Series CCS-47/CS-47 High Power DC 12 GHz Latching TRANSFER Coaxial Switch

Series CCR-33K/CR-33 K Miniature DC 33.5 GHz Failsafe SPDT Coaxial Switch

HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393

SP4T RF Switch 50 Ω Absorptive RF switch 1 to 6000 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V

Typical Performance Curves

Main Features: ERZ-LNA Typical applications: Performance

MSW3T SP3T Surface Mount High Power PIN Diode Switch

Features. = +25 C, Vdd = +5 Vdc, 50 Ohm System. trise, tfall (10/90% RF) ton, toff (50% CTL to 10/90% RF)

HMC245QS16 / 245QS16E. Features OBSOLETE. Parameter Frequency Min. Typ. Max. Units. DC GHz DC GHz DC GHz

Series CCRS-53S/CRS-53S Miniature DC 26.5 GHz Failsafe 2P3T Coaxial Switch

Features OBSOLETE. Isolation DC GHz db

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

Features. = +25 C, With 0/+5V Control, 50 Ohm System

RAMSES SERIES R 570 PART NUMBER SELECTION. SPDT up to 18 GHz. Our Most Important Connection is with You. N - TNC - BNC

SERIES 8000 LAN FOUR 1X6 TWO 1X2 Product Part Number:

Series CCR-53S/CR-53S Miniature DC 26.5 GHz Latching SPDT Coaxial Switch

7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195

SMT Hybrid Couplers, RF Parameters and Applications

7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393

Features OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

HMC284AMS8G / HMC284AMS8GE

N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC. Cable Attachment Method (Shield/Contact)

Series CCR-40K/CR-40K Miniature DC 40 GHz Latching SPDT Coaxial Switch

Features OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System

HIGH REPEATABILITY, TO-5 RELAYS DPDT

Series CCR-33K/CR-33K Miniature DC 33.5 GHz Latching SPDT Coaxial Switch

Manufacturers of RF and Microwave Components and Assemblies Specialist in RF Filters, Power amplifiers and RF Switches

HIGH REPEATABILITY, DC-8 GHz/20Gbps TO-5 RELAYS, DPDT

Series H-47N DC up to 12 GHz Latching Transfer Space Grade Coaxial Switch

Series H-33S DC up to 26.5 GHz Latching SPDT Space Grade Coaxial Switch

PIN Diode Driver (Positive Voltage)

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

Series CCRS-53S/CRS-53S Miniature DC 26.5 GHz Latching 2P3T Coaxial Switch

Passive 1X2 GPS Splitter Technical Product Data

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

Features. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 19 db

Model BD3238N5050AHF. Ultra Low Profile 0404 Balun

Transcription:

SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA The FMSW6129 is an SP4T Electromechanical Relay Switch that operates over a wide frequency band from DC to 22 GHz and has a rating of 20 Watts input power (CW). Rated for 1M life cycles for high reliability operation, this design uses a Normally Open Actuator with a break before make configuration, TTL logic driver, position indicators and suppression diodes. The switch exhibits exceptional electrical performance specified from 0.3 db max for insertion loss and 75 db min for isolation, and guaranteed over -55 C to +85 C. The assembly requires an operating voltage of +28Vdc and is certified as RoHS compliant. External connectors include solder terminals and SMA female connectors. Electrical Specifications Switch Type Actuator Type Switching Sequence Actuator Options TTL Control SP4T, Reflective Normally Open Break Before Make Indicators, TTL Logic, Diodes on: 2.4 to 5 Volts off: 0 to 0.8 Volts Description Min Typ Max Units Frequency Range DC 22 GHz Impedance 50 Ohms Operating Voltage 28 Volts Actuating Current @ 28 Volts 135 ma VSWR 1.6:1 Insertion Loss 0.6 db Isolation 60 db Input Power (CW) 20 Watts (at 22 GHz) Features: Single Pole Four Throw Relay Switch DC to 22 GHz Frequency Range 1M Cycle Operating Life Min Normally Open Actuator TTL Logic Driver, Position Indicators, Suppression Diodes Insertion Loss 0.6 db max Isolation 60 db min 20 Watts Avg Power Max Switching Sequence Break Before Make Applications: Test & Measurement Communications System Instrumentation Performance by Frequency Description F1 F2 F3 F4 F5 Units Frequency Range DC - 4 4-8 8-12 12-18 18-22 GHz VSWR, Max 1.2:1 1.3:1 1.4:1 1.5:1 1.6:1 Insertion Loss, Max 0.3 0.35 0.4 0.5 0.6 db Isolation, Min 75 70 65 60 60 db Mechanical Specifications Size Length 2.75 in [69.85 mm] Width/Diameter 1.75 in [44.45 mm] Height 1.75 in [44.45 mm]. Weight 0.367 lbs [166.47 g] Body Material and Plating Aluminum Package Type Connectorized. Operating Life Switching Time 1,000,000 Cycles 15 ms Max Fairview Microwave 1130 Junction Dr. #100 Allen, TX 75013 Tel: 1-800-715-4396 / (972) 649-6678 Fax: (972) 649-6689 www.fairviewmicrowave.com sales@fairviewmicrowave.com REV 1.2 Page 1 of 6 Copyright 2016

Connectors RF Connector Type SMA Female RF Connector Contact Material & Plating Beryllium Copper, Gold RF Connector Body Material & Plating Passivated Stainless Steel Control Connector Solder Pin Environmental Specifications Temperature Operating Range ESD Sensitivity -55 to +85 deg C ESD Sensitive Material. Transport material in Approved ESD bags. Handle in approved ESD Workstation. Environmental Specification Notes: Designed to meet MIL-DTL-3928 Compliance Certifications (visit www.fairviewmicrowave.com for current document) RoHS Compliant Plotted and Other Data Notes: REV 1.2 Page 2 of 6

Typical Performance Data 0 Insertion Loss -0.4-0.8 db -1.2-1.6-2 PORT 1 PORT 2 PORT 3 PORT 4 0 2.2 4.4 6.6 8.8 11 13.2 15.4 17.6 19.8 22 Freq (GHz) 2 1.8 1.6 PORT 1 PORT 2 PORT 3 PORT 4 VSWR 1.4 1.2 1 0 2.2 4.4 6.6 8.8 11 13.2 15.4 17.6 19.8 22 Freq (GHz) REV 1.2 Page 3 of 6

0 Isolation -20-40 PORT 1 PORT 2 PORT 3 PORT 4 db -60-80 -100-120 0 2.2 4.4 6.6 8.8 11 13.2 15.4 17.6 19.8 22 Freq (GHz) SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Allen, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA FMSW6129 URL: http://www.fairviewmicrowave.com/sp4t-normally-open-electro-mechanical-relay-switch-indicators-ttl-fmsw6129-p. aspx REV 1.2 Page 4 of 6

SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA REV 1.2 Page 5 of 6

SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA REV 1.2 Page 6 of 6