catalogue Professional Tools for the Flooring Trade 94964 93200 ANTI BOUNCE MALLET LASERMETER F-04 91150 DELPHIN 691101 PAINTED 691102 POLISHED 92236 92300 92136 91273 100 SUPER HOOK BLADE 100 CONCAVE BLADE 100 LONG STRAIGHT BLADE - 60 mm DC - 561 CUTTER - 18 mm For assembling LVT click planks. Shocks absorbed. Does not leave marks. Weight : 880 g. Quick, simple, lightweight, accurate. Measures from the front or the rear base. 2-line digital screen (last measure and result) Simple or continuous measurement. Measures distance, surface, volume. Pythagoras feature (2 points, 3 points). Addition / Subtraction. Supplied with holster, strap, 2 AA batteries Made of cast aluminium. Opening by turning the knurl on the side. Supplied with a protective plastic case, without blade. Red paint finish. Supplied without blade. Finely polished, shiny finish. Supplied without blade. Thickness 0.65 mm. Packed in safety dispenser. Thickness 0.65 mm. Packed in safety dispenser. 60 mm, thickness 0.65 mm. Packed in safety dispenser. Strong locking by turning the knurl. Stainless steel blade guide reinforced at the end. Can be used as a screwdriver. Elastomer handle: better grip. Supplied with 2 spare blades in the handle. Supplied in blister card. 92706 92700 91410 92416 91400 92406 95510 50 RAZAR BLACK BLADE - 18 mm 100 STANDARD SNAP OFF BLADES - 18 mm HIGH-TECH 100 BLADES FOR HIGH-TECH CARPET & VINYL 100 BLADES FOR CARPET AND VINYL «PROVINOL» EDGE Narrower sharpening angle for finer cut. Highly alloyed steel, longer lifespan. Black surface treatment - for better blade slide, - to prevent glue adhesion - to avoid oxidisation. Width 18 mm. Thickness 0.50 mm. 7 segments. Angle adjustment by tilting the knurl. Small angle "A" is required for a perfect cut of a thick floor covering and larger angle "B" is required for a thin one. Uses blades 92416. Supplied with 2 blades. Thickness 0.65 mm. Registered design. For easy trimming of thin floor coverings. Uses blades 92406. Supplied with 2 blades (not mounted), packed in blister card. Thickness 0.65 mm. For PVC and linoleum. Supplied with an adjustable Ø 40 mm round blade. Seamless cut wall to wall from 2 to 27 mm. Suitable for cutting: 2 overlapping strips protective edges on linoleum rolls. 95512 2 SPARE BLADES FOR «PROVINOL», Ø 40mm 1 Tools for Flooring Professionals
95520 LINO-CUT JOINT CUTTER For cutting PVC and linoleum. Adjustable cutting depth. Can be used in both directions. 95521 10 SPARE BLADES FOR LINO-CUT 95185 TRIANGULAR To make a "V" groove. For GERFLOR floor coverings. Wide joints. Wooden handle. Brass plated ferrule. Dimensions: 24 x 6 cm. 93415 MITRE SHEARS 95430 WALL SCRIBER 93760 93135 93138 MINI UNROLLING TROLLEY INTERNAL ANGLE DOUBLE ANGLE 93170 STEEL 93145 CORK PRESS For cutting wooden tackless strips, PVC profiles, tiling etc. For drawing along walls using a pencil. Ideal for coving PVC or linoleum or installing skirtings or edge profiles. Length: 21 cm. Max. height: 20 cm. Supplied with one pencil. For floor covering unrolling and handling. Rustproof steel structure. 4 Ø 60 mm nylon wheels, 2 of which with brake. Dim.: L. 320 x W. 250 x H. 200 mm. Max. load: 100 kg. For "breaking" and smoothing the wall covering in internal angles. For smoothing internal and external angles. Wooden handle. Metal shank. For butt joints of floor coverings. Does not damage the material, even fragile. Especially adapted to be used alongside skirtings. Width: 50 mm. Weight: 1 kg. To smooth PVC and linoleum floor coverings without marking surface. Dimensions: 300 x 120 x 25 mm. 91580 THICK RULER To guide the grooving tool when making grooves for PVC hot welding. Thickness: 4 mm. Dimensions: 800 x 60 x 4 mm. Mill alu. 95125 WALL To make a "U" groove in thin wall coverings (e. g. in shower cubicles). Pre-adjusted unique blade depth. 95126 SPARE BLADE FOR WALL 95175 ROUNDED 95101 LINEA 95120 PICO To make a "U" (round) groove. Universal groover. Length: 24 cm. Tight joint. To make a "U" groove without ruler, in a regular and uniform way. Frame with 4 guiding castor wheels. Tight joint. To make a "U" groove without ruler, in a regular, uniform and rapid way. New guiding system (no play) for more precision. Can be used in both directions. Tight joint. 95176 10 SPARE BLADES FOR 95175, 95120, 95101 «U» shape, adjustable 95105 FOR SAFETY FLOORS To make a "U" groove in very hard carborundum-based floor coverings (TARASAFE). Supplied with a fitted double sided blade + guide. 95106 SPARE BLADE FOR SAFETY 2 sides 95200 «MASTER TURBO» (Patented in Europe & USA) Perfectly guided, no need to adjust, extremely simplified use. Suitable for small and large surfaces. Supplied with 2 grooving blades for 4 mm rods. 95202 SPARE GROOVING BLADE for 95200 (Pack of 2) 93155 LIGHTWEIGHT RUBBER To smooth all kinds of floors. Allows to smooth with the body weight (pressure from 8 to 80 kg). Length: 1.30 m. Total width: 45 cm. Weight: 5 kg. 95078 TRIAC-ST ELECTRONIC GUN Hot air outflow up to 230 l/min. Continuously adjustable temperature from 20 C to 700 C. Heat protection. Electronic element protection. Power: 1600 W. 230 V. Weight: 1.3 kg. Noise level: 65 db. Supplied with a standard push fit nozzle. 2 Tools for Flooring Professionals
95028 COVING ANTI-GLAZE RAPID Ø 4-5 mm Similar to the anti-glaze rapid nozzle but with a curved slot, designed for coving welding. 95040 TURBO RAPID Suitable for welding PVC and linoleum, especially for coving welding (curved nozzle) 95085 BASIC FLOOR KIT PVC case including 13 elements: 1 LEISTER TRIAC-ST welding gun 95078 1 push fit nozzle holder nozzle 1 grooving tool 95175 1 quarter moon knife 95140 1 trimming guide 95150 1 anti-glaze rapid nozzle 95027 1 nozzle brush 95195 10 spare blades 95176 1 leather pouch 95155 1 spare element 97077 1 rapid nozzle 95024 1 sharpening stone 95190 1 wire brush 95193 95044 95030 95039 SWAN NECK TRIANGULAR RAPID Ø 4-5 mm ANGLE FINISHING For finishing angles. For melting the rod in angles by applying pressure. For welding PVC wall coverings. For melting the rod in angles by applying pressure. 95195 BRUSH To remove melted rod residues from nozzle ducts. Length: 16 cm. 95446 TEMPLATES FOR SKIRTING ANGLES For grooving in coved skirting angles. 95445 TEMPLATES FOR SKIRTING ANGLES For grooving in coved skirting angles. 95088 PRO FLOOR KIT 97077 SPARE «TRIAC ST» ELEMENT 95012 SPARE «TRIAC BT» ELEMENT 95008 SPARE «TRIAC S» ELEMENT 95027 ANTI-GLAZE RAPID Ø 4-5 mm Complete PVC case including 16 elements: 1 LEISTER TRIAC-ST welding gun 95078 1 push fit nozzle holder nozzle 1 grooving tool 95175 10 spare blades 95176 1 spare element 97077 1 anti-glaze rapid nozzle 95027 1 wire brush 95193 1 nozzle brush 95195 1 coving anti-glaze rapid nozzle 95028 1 angle finishing nozzle 95039 1 flat angle template 95446 1 90 folded angle template 95445 1 trimming gouge 95160 2 flat blades 95163 1 «Mozart» trimming knife 95130 5 spare «Mozart» blades 95129. Narrow (0.9 mm) hot airflow directed right into the groove. For welding surface-treated PVC: it prevents groove edges from damage. Faster rod melting allows also faster welding. 95197 93139 95130 BALL-PRESSURE SHAFT - SMOOTHER MOZART «2 in 1» TRIMMING 95129 5 SPARE BLADES FOR 95130 93355 COMBI SCRIBER For pressing the covering when welding in internal angles. Ø 13 mm brass ball. For pressing coverings in internal angles, flat side for cove smoothing of skirtings. Revolutionary tool that combines - a trimming blade - a trimming guide that easily retracts for final trim. Supplied in a PVC box with 2 trimming guides 1 for PVC, th. 0.5 mm 1 for linoleum, th. 0.7 mm Dim. 170 x 30 x 30 mm. Weight: 165 g Turning lower guide rail allows use as standard or recess scriber. Length: 17 cm. Supplied with 10 needles and 3 blades. 93357 25 SPARE NEEDLES FOR COMBI SCRIBER 3 Tools for Flooring Professionals
95410 JOINT SCRIBER For joint tracing. Length: 19 cm. 95400 LONG SCRIBER 93840 STAIR TOOL 38 cm long, Wall or profiles contour transfer. Used to fix carpet behind the gripper after trimming. Polished chromium plated steel. 95160 WELD Multipurpose trimmer, depending on inserted blade. To be used on cold rod only. Supplied with a rounded blade 95161. 95161 2 ROUNDED BLADES Ø 6mm 95163 2 FLAT BLADES 95164 95650 95670 2 POINTED BLADES COLD TUBE WITH APPLICATOR - A 44 gr. COLD TUBE WITH APPLICATOR - A 132 gr. Ø 6 mm For trimming welding rods alongside skirtings or in cove-cap skirtings, stairs angles. Pack of 2. For trimming rods alongside joints or in cove-cap skirtings. Pack of 2. For grooving. Pack of 2. For sealing 20 m of joints. For sealing 65 m of joints. DOWNLOAD THIS CATALOGUE OR ORDER FORM FROM : www.gerflor.com.au TOOL STORE : Gerflor Australasia, 17 Cato St (access via rear Cato Lane), Hawthorn East 3123. Hours : 8am-4pm TO PLACE YOUR ORDER CONTACT CUSTOMER SERVICE on 1800060785 or custorders@gerflor.com.au FOR TECHNICAL ADVICE CONTACT : Stephen King 0447326851 4 Tools for Flooring Professionals
Order Form Professional Tools for the Flooring Trade 94964 93200 91150 691101 691102 92236 93200 92136 91273 Price Qty ANTI BOUNCE MALLET LASERMETER F-04 DELPHIN PAINTED POLISHED 100 SUPER HOOK BLADE 100 CONCAVE BLADE 100 LONG STRAIGHT BLADE 60mm DC-561 CUTTER 18mm For assembling LVT click planks. Shock absorbing. Does not leave marks. Weight: 880g Quick, simple, lightweight, accurate. Measures from the front or the rear base. 2-line digital screen (last measure and result). Simple or continuous measurement. Measures distance, surface, volume. Pythagoras feature (2 points, 3 points). Addition / Subtraction. Supplied with holster, strap, 2 AA batteries. Made of cast aluminium. Opening by turning the knurl on the side. Supplied with a protective plastic case, without blade. Red paint finish. Supplied without blade. Finely polished, shiny finish. Supplied without blade. Thickness 0.65mm. Packed in safety dispenser. Thickness 0.65mm. Packed in safety dispenser. 60mm, thickness 0.65mm. Packed in safety dispenser. Strong locking by turning the knurl. Stainless steel blade guide reinforced at the end. Can be used as a screwdriver. Elastomer handle: better grip. Supplied with 2 spare blades in the handle. Supplied in blister card. $29.98 $257.81 $29.50 $9.50 $7.21 $55.00 $56.33 $47.00 $14.72 92706 92700 91410 92416 91400 92406 95510 95512 Price Qty 50 RAZAR BLACK BLADE 18mm 100 STANDARD SNAP OFF BLADES 18mm HIGH-TECH 100 BLADES FOR HIGH- TECH CARPET & VINYL 100 BLADES FOR CARPET & VINYL <PROVINOL> EDGE Narrower sharpening angle for finer cut. Highly alloyed steel, longer life span Black surface treatment - For better blade slide - To prevent glue adhesion - To avoid oxidisation Width 18mm. Thickness 0.50mm. 7 segments. Angle adjustment by tilting the knurl. Small angle A is required for a perfect cut of a thick floor covering and larger angle B is required for a thin one. Uses blades 92416. Supplied with 2 blades. $30.38 $60.00 $57.00 Thickness 0.65mm. $58.65 Registered design. For easy trimming of thin floor coverings. Uses blades 92406. Supplied with 2 blades (not mounted), packed in blister card. $21.03 Thickness 0.65mm. $62.75 For PVC and linoleum. Supplied with adjustable Ø 40mm round blade. Seamless cut wall to wall from 2 to 27mm. Suitable for cutting: 2 overlapping strips Protective edges on linoleum rolls. 2 SPARE BLADES FOR <PROVINOL>, Ø 40mm $213.19 $76.52 1 Tools for Flooring Professionals
Order Form 95520 Price Qty LINO-CUT JOINT CUTTER For cutting PVC and linoleum. Adjustable $557.89 cutting depth. Can be used in both directions. CUT $27.12 For cutting wooden tackless strips, PVC $55.83 profiles, tiling etc. For drawing along walls using a pencil. Ideal for coving PVC or linoleum or installing skirtings or $182.56 edge profiles. Length: 21cm Max. height: 20 cm Supplied with one pencil. For floor covering unrolling and handling. Rustproof steel structure. 4 Ø 60 mm nylon wheels. $270.97 2 of which with brake. Dimensions: L. 320 x W. 250 x H. 200 mm. Max. load: 100 kg For breaking and smoothing the wall $32.00 covering in internal angles. For smoothing internal and external angles. $32.00 Wooden handle. Metal shank. For butt joints of floor coverings. Does not damage the material, even fragile. Especially $59.00 adapted to be used alongside skirtings. Width: 50 mm Weight: 1 kg To smooth PVC and linoleum floor coverings without marking $25.00 surface. Dimensions: 300 x 120 x 25 mm To smooth all kinds of floors. Allows to smooth with the body weight (pressure from 8 to 80 $155.00 kg) Length: 1.30m Total width: 45 cm Weight: 5 kg 95521 10 SPARE BLADES FOR LINO-CUT 93415 95430 93760 93135 93138 93170 93145 93155 MITRE SHEARS WALL SCRIBER MINI UNROLLING TROLLEY INTERNAL ANGLE DOUBLE ANGLE STEEL CORK PRESS LIGHTWEIGHT RUBBER 95185 Price Qty TRIANGULAR 91580 THICK RULER 95125 WALL To make a V groove. For Gerflor floor coverings. Wide joints. Wooden handle. Brass plated ferrule. Dimensions: 24 x 6cm To guide the grooving tool when making grooves for PVC hot welding. Thickness: 4mm. Dimensions: 800 x 60 x 4 mm. Mill alu. To make a U groove in thin wall coverings (eg. in shower cubicles). Preadjusted unique blade depth. $33.60 $70.18 $67.50 95126 SPARE BLADE FOR WALL $26.50 95175 To make a ROUNDED U (round) groove. Universal groover. $31.00 Length: 24cm tight joint. 95101 To make a U groove without ruler, in a regular LINEA and uniform way. Frame with 4 guiding castor $330.00 wheels. Tight joint. 95120 To make a U groove without ruler, in a regular, uniform and rapid way. New PICO guiding system (no play) for more precision. Can be used $345.00 in both directions. Tight joint. 95176 10 SPARE BLADES FOR 95175, 95120, 95101 U shape, adjustable $3.50 To make a U groove in very 95105 FOR SAFETY FLOORS hard carborundum-based floor coverings (TARASAFE). Supplied with a fitted double sided blade + guide. $78.05 95106 SPARE BLADE FOR SAFETY 2 sides $20.52 <MASTER TURBO> Perfectly guided, no need to adjust, extremely simplified 95200 use. Suitable for small and (Patented in large surfaces. Supplied $1429.76 Europe & USA with 2 grooving tubes for 4 mm rods 95202 SPARE GROOVING BLADE for 95200 (pack of 2) $94.61 95078 Hot air outflow up to 230l/min. Continuously adjustable from 20 C to TRIAC-ST 700 C. Heat protection. ELECTRONIC Electronic element protection. Power: 1600 W. GUN 230 V. Weight 1.3kg. Noise level: 65 db. Supplied with a standard push fit nozzle. $957.00 2 Tools for Flooring Professionals
Order Form 95085 95088 Price Qty BASIC FLOOR KIT PRO FLOOR KIT PVC case including 13 elements: 1 LEISTER TRIAC-ST welding gun 95078 1 push fit nozzle holder nozzle 1 grooving tool 95175 1 quarter moon knife 95140 1 trimming guide 95150 1 anti-glaze rapid nozzle 95027 1 nozzle brush 95195 10 spare blades 95176 1 leather pouch 95155 1 spare element 97077 1 rapid nozzle 95024 1 sharpening stone 95190 1 wire brush 95193 Complete PVC case including 16 elements 1 LEISTER TRIAC-ST welding gun 95078 1 push fit nozzle holder nozzle 1 grooving tool 95175 10 spare blades 95176 1 spare element 97077 1 anti-glaze rapid nozzle 95027 1 wire brush 95193 1 nozzle brush 95195 1 coving anti-glaze rapid nozzle 95028 1 angle finishing nozzle 95039 1 flat angle template 95446 1 90 folded angle template 95445 1 trimming gouge 95160 2 flat blades 95163 1 <Mozart> trimming knife 95130 5 spare <Mozart> blades 95129 $1316.19 $1436.86 95028 95040 95044 95030 95039 95195 95446 95445 95197 93139 95130 Price Qty COVING ANTI-GLAZE RAPID Ø 4-5mm TURBO RAPID SWAN NECK TRIANGULAR RAPID Ø 4-5mm ANGLE FINISHING BRUSH 97077 SPARE <TRIAC ST> ELEMENT $116.36 95012 SPARE <TRIAC BT> ELEMENT $113.79 95008 SPARE <TRIAC S> ELEMENT $86.20 Narrow (0.9mm) hot airflow 95027 ANTI- GLAZE RAPID Ø 4-5mm4 directed right into the groove. For welding surface-treated PVC: It prevents groove edges from damage. Faster rod melting allows also faster welding. $56.00 TEMPLATES FOR SKIRTING ANGLES TEMPLATES FOR SKIRTING ANGLES BALL- PRESSURE SHAFT SMOOTHER MOZART <2 in 1> TRIMMING Similar to the anti-glaze rapid nozzle but with a curved slot, designed for coving welding. Suitable for welding PVC and linoleum, especially for coving welding (curved nozzle) For finishing angles. For melting the rod in angles by applying pressure. For welding PVC wall coverings. For melting the rod in angles by applying pressure. To remove melted rod residues from nozzle ducts. Length: 16cm For grooving in coved skirting angles. For grooving in coved skirting angles. For pressing the covering when welding in internal angles. Ø 13mm brass ball. For pressing coverings in internal angles, flat side for cove smoothing of skirtings. Revolutionary tool that combines A trimming blade A trimming guide that easily retracts for final trim Supplied in a PVC box with 2 trimming guides 1 for PVC, th. 0.5mm 1 for linoleum, th. 0.7mm Dimensions: 170 x 30 x 30 mm Weight: 165g $84.50 $158.74 $37.00 $56.00 $48.00 $9.00 $13.50 $16.50 $63.87 $15.00 $102.52 95129 5 SPARE BLADES FOR 95130 $35.00 93355 Turning lower guide rail allows use as standard or COMBI recess scriber. Length: 17cm. SCRIBER Supplied with 10 needles and 3 $144.82 blades. 93357 25 SPARE NEEDLES FOR COMBI SCRIBER $17.00 3 Tools for Flooring Professionals
Order Form 95410 95400 93840 95160 95161 Price Qty JOINT SCRIBER For joint tracing. Length: 19cm. LONG 38 cm long, wall or profiles SCRIBER contour transfer. Used to fix carpet behind the STAIR gripper after trimming. TOOL Polished chromium plated steel. Multipurpose trimmer, depending on inserted WELD blade. To be used on cold rod only. Supplied with a rounded blade 95161 Ø 6mm for trimming welding 2 ROUNDED rods alongside skirtings or BLADES Ø in cove-cap skirtings, stairs 6mm angles. Pack of 2. $74.68 $73.00 $17.91 $17.00 $7.50 95163 95164 95650 95670 Price Qty 2 FLAT BLADES 2 POINTED BLADES COLD TUBES WITH APPLICATOR A 44 gr. COLD TUBE WITH APPLICATOR A 132 gr. For trimming rods alongside joints or in covecap skirtings. Pack of 2. $7.50 For grooving. Pack of 2. $7.60 For sealing 20 m of joints. $15.77 For sealing 65 m of joints. $36.21 Order Details *prices exclude GST Customer Name Delivery Address Contact Person Phone Fax : Email Address Customer Order Total cost will include delivery charges. Small satchels between $16.25 - $26.25 + GST Mainfreight small skid 5-150 hg Melb metro only $29.90 + GST (on-forwarding charges to regional areas are the responsibility of the receiver). Interstate delivery cost over 5 kg price on request. Payment Details Credit Card Or Cash Payment $ Name on Card Card Expiry Date / To place your order contact Customer Service on 1800 060 785 or scan and email your completed form to custorders@gerflor.com.au www.gerflor.com.au 4 Tools for Flooring Professionals