Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 00000000 TRC ELECTRONICS, INC. IP65 IP67 Metal housing with class I design Ⅰ current output. HLG40H operates from 90~305VAC and offers models with different rated voltage ranging between 1V and 54V. Thanks to the high efficiency up to 89.5%, with the fanless design, the entire series is able to operate for 40 ~ 80 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG40H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. I I B I D File Name:HLG40HSPEC 18059
SPECIFICATION MODEL HLG40H1 HLG40H15 HLG40H HLG40H4 HLG40H30 HLG40H36 HLG40H4 HLG40H48 HLG40H54 DC VOLTAGE 1V 15V V 4V 30V 36V 4V 48V 54V CONSTANT CURRENT REGION Note.4 7. ~1V 9 ~ 15V 1 ~ V 14.4 ~ 4V 18 ~ 30V 1.6 ~ 36V 5. ~ 4V 8.8 ~ 48V 3.4 ~ 54V RATED CURRENT RATED POWER 3.33A 39.96W.67A 40.05W A 40W 1.67A 40.08W 1.34A 40.W 1.1A 40.3W 0.96A 40.3W 0.84A 40.3W 0.75A 40.5W RIPPLE & NOISE (max.) Note. 150mVpp 150mVpp 150mVpp 0mVpp 0mVpp 0mVpp 0mVpp 300mVpp 300mVpp OUTPUT VOLTAGE ADJ. RANGE Adjustable for A/ABType only (via builtin potentiometer) 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ V ~ 7V 7 ~ 33V 33 ~ 40V 40 ~ 46V 44 ~ 53V 49 ~ 58V CURRENT ADJ. RANGE Adjustable for A/ABType only (via builtin potentiometer) ~ 3.33A 1.6 ~.67A 1. ~ A 1 ~ 1.67A 0.8 ~ 1.34A 0.67 ~ 1.1A 0.58 ~ 0.96A 0.5 ~ 0.84A 0.45 ~ 0.75A VOLTAGE TOLERANCE Note.3 ±.5% ±.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION LOAD REGULATION ±.0% ±1.5% ±1.0% SETUP, RISE TIME Note.6 500ms,80ms/115VAC 500ms,80ms/30VAC HOLD UP TIME (Typ.) 16ms / 115VAC, 30VAC VOLTAGE RANGE Note.5 90 ~ 305VAC 17 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz PF 0.98/115VAC, PF 0.95/30VAC, PF 0.9/77VAC @ full load (Please refer to " POWER FACTOR (PF) CHARACTERISTIC" section) THD< % (@ load 60% / 115VAC,30VAC; @ load 75% / 77VAC) TOTAL HARMONIC DISTORTION INPUT (Please refer to " TOTAL HARMONIC DISTORTION (THD)" section) EFFICIENCY (Typ.) 86.5% 86.5% 88% 88% 88.5% 88.5% 88.5% 89.5% 89.5% AC CURRENT (Typ.) 0.43A / 115VAC 0.4A / 30VAC 0.3A / 77VAC INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT COLD START 50A(t width=10 μs measured at 50% I peak) at 30VAC; Per NEMA 410 1 units (circuit breaker of type B) / units (circuit breaker of type C) at 30VAC <0.75mA / 77VAC OVER CURRENT 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTION 15 ~ 1V 18 ~ 4V 3 ~ 30V 8 ~ 35V 35 ~ 43V OVER VOLTAGE Shut down o/p voltage, repower on to recover 41 ~ 49V 48 ~ 58V 54 ~ 65V 59 ~ 68V OVER TEMPERATURE Shut down o/p voltage, repower on to recover WORKING TEMP. Tcase= 40 ~ 80 (Please refer to "OUTPUT LOAD vs TEMPERATURE" section) MAX. CASE TEMP. Tcase= 80 ENVIRONMENT WORKING HUMIDITY ~ 95% RH noncondensing STORAGE TEMP., HUMIDITY 40 ~ 80, 10 ~ 95% RH TEMP. COEFFICIENT VIBRATION ± 0.03%/ (0 ~ 60 ) 10 ~ 500Hz, 5G 1min./1cycle, period for 7min. each along X, Y, Z axes SAFETY STANDARDS UL8750(type HL ), CSA C. No. 50.008, EN/AS/NZS 613471,EN/AS/NZS 6134713 independent,gb19510.1,gb19510.14,eac TP TC 004, Note.8 IP65 or IP67 approved ; optional models for J613471, J6134713 ; design refer to UL609501, TUV EN609501, EN603351 SAFETY & WITHSTAND VOLTAGE I/PO/P:3.75KVAC I/PFG:KVAC O/PFG:1.5KVAC EMC ISOLATION RESISTANCE I/PO/P, I/PFG, O/PFG:100M Ohms / 500VDC / 5 / 70% RH OTHERS NOTE EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING Note.8 Compliance to EN55015, EN610003 Class C (@ load 60%) ; EN6100033,GB17743 and GB1765.1, EAC TP TC 0 Compliance to EN610004,3,4,5,6,8,11; EN61547, EN5504, light industry level (surge immunity LineEarth 4KV, LineLine KV), EAC TP TC 0 1131.9K hrs min. Telcordia SR33 (Bellcore) ; 336.5K hrs min. MILHDBK17F (5 ) 171*61.5*36.8mm (L*W*H) 0.73Kg; pcs/15.6kg/0.9cuft File Name:HLG40HSPEC 18059
BLOCK DIAGRAM Fosc : 100KHz I/P FG EMI FILTER & RECTIFIERS PFC CIRCUIT O.T.P. O.L.P. POWER SWITCHING PWM & PFC CONTROL RECTIFIERS & FILTER O.L.P. DETECTION CIRCUIT V V DIM DIM (B Type) O.V.P. DRIVING METHODS OF LED MODULE This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. 100 In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Vo(%) (A) Constant Voltage area (B) Constant Current area Should there be any compatibility issues, please contact TRC MEAN Electronics WELL. for details. 60 (min.) (C) Hiccup Protection 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HLG40HSPEC 18059
DIMMING OPERATION AC/L(Brown) AC/N(Blue) FG (Green/Yellow) HLG40H V(Brown) V(Blue) DIM(Gray) DIM(Black) 3 in 1 dimming function (for B/ABType) Output constant current level can be adjusted by applying one of the three methodologies between DIM and DIM: 1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100μA (typ.) Applying additive 1 ~ 10VDC V V DIM DO NOT connect "DIM to V" Additive Voltage Output current (%) 100% 90% 80% 70% 60% 50% 40% 30% % 10% 1V V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage DIM Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): V V DIM Additive PWM signal DIM DO NOT connect "DIM to V" Output current (%) 100% 90% 80% 70% 60% 50% 40% 30% % 10% 10% % 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input Applying additive resistance: V V DIM DIM Additive Resistance Output current (%) 100% 90% 80% 70% 60% 50% 40% 30% DO NOT connect "DIM to V" % 10% 10K/N K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation) Dimming input: Additive resistance File Name:HLG40HSPEC 18059
Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options. N FG L Relay Swih Adjuster 10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L AC/N HLG40H BType DIM DIM V() V() Gray Black Blue Brown LED Lighting Fixture Using a swih and relay can turn ON/OFF the lighting fixture. File Name:HLG40HSPEC 18059
TRC ELECTRONICS, INC. OUTPUT LOAD vs TEMPERATURE(Note.10) 100 100 80 60 30VAC Input only 80 60 30VAC Input only LOAD (%) 40 LOAD (%) 40 40 5 10 0 15 30 50 60 70 (HORIZONTAL) 40 5 0 45 55 65 75 80 (HORIZONTAL) AMBIENT TEMPERATURE,Ta ( ) Tcase ( ) STATIC CHARACTERISTICS POWER FACTOR(PF) CHARACTERISTIC Tcase at 70 Constant Current Mode 100 1 90 0.99 0.98 80 0.97 0.96 0.95 70 PF 0.94 0.93 77VAC LOAD (%) 60 50 40 0.9 0.91 0.9 0.89 0.88 0.87 30VAC 115VAC 0.86 90 100 15 135 145 155 165 175 180 0 30 305 0.85 50% 60% 70% 80% 90% 100% INPUT VOLTAGE (V) 60Hz LOAD (40W) Derating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) 48V Model, Tcase at 70 5 EFFICIENCY vs LOAD HLG40H series possess superior working efficiency that up to 89.5% can be reached in field applications. 48V Model, Tcase at 70 9 90 88 86 THD(%) 15 10 5 77VAC 30VAC 115VAC EFFICIENCY (%) 84 8 80 78 76 74 77VAC 30VAC 115VAC 7 0 50% 60% 70% 80% 90% 100% 70 10% % 30% 40% 50% 60% 70% 80% 90% 100% LOAD LOAD File Name:HLG40HSPEC 18059
LIFETIME 1 100 80 LIFETIME(Kh) 60 40 0 5 30 35 40 45 50 55 60 65 70 75 80 Tcase ( ) File Name:HLG40HSPEC 18059
MECHANICAL SPECIFICATION Case No.957B Unit:mm Blank/DType 171 11.9 147. 9.6 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJOW 17AWG& H05RN F 1. 0mm 3C 3 46.5 61.5 30.75 73.6 V(Brown) SJOW 17AWG& H05RN F 1. 0mm C V(Blue) ψ 4. 4PL : Max. Case Temperature 36.8 AType 171 11.9 147. 9.6 AC/L(Brown) 73.6 V(Brown) AC/N(Blue) FG (Green/Yellow) SJOW 17AWG& H05RN F 1. 0mm 3C Io Vo SJOW 17AWG H05RN F 1 0mm C V(Blue) &. ADJ ADJ 3 46.5 61.5 30.75 ψ 4. 4PL : Max. Case Temperature 36.8 File Name:HLG40HSPEC 18059
BType 171 11.9 147. 9.6 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJOW 17AWG& H05RN F 1. 0mm 3C 3 46.5 61.5 30.75 73.6 SJOW 17AWG& H05RN F 1. 0mm C SJOW 17AWG& H05RN F 1. 0mm C ψ 4. 4PL V(Brown) V(Blue) DIM(Gray) DIM(Black) : Max. Case Temperature 36.8 ABType 171 11.9 147. 9.6 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJOW 17AWG& H05RN F 1. 0mm 3C 3 46.5 61.5 30.75 73.6 Io ADJ Vo ADJ SJOW 17AWG& H05RN F 1. 0mm C SJOW 17AWG& H05RN F 1. 0mm C ψ 4. 4PL V(Brown) V(Blue) DIM(Gray) DIM(Black) : Max. Case Temperature 36.8 File Name:HLG40HSPEC 18059
TRC ELECTRONICS, INC. WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HLG40H to operate in dry/wet/damp or outdoor environment. AC source I/P HLG40H O/P Size Pin Configuration (Female) Size Pin Configuration (Female) M1 Order No. Suitable Current 4PIN 5A/PIN M104 10A max. 5PIN 5A/PIN M105 10A max. M15 Order No. Suitable Current PIN 1A/PIN M150 1A max. LED Lamp Cable Joiner 66 6 CJ041 suitable for 14AWG~16AWG CJ04 suitable for 18AWG~AWG ψ5 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG40H O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ041, CJ04. INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:HLG40HSPEC 18059