Retro-reflective sensors with polarizing filters, M8 housing Range adjustable Light reserve warning indicator Dual transistor outputs, NPN or PNP 000 Hz switching frequency Short-circuit protection, reverse polarity protection, and power-up output suppression Connections: Straight cable, meter Connector, M EMC tested according to IEC 80 and EN5008-/EN 5008- Product designation Plastic housing ) Product designation Stainless steel ) Output MP NA 00 R MP NA 00 RM MP NA 00 R MP NA 00 RM NPN (light- and dark-on) MP PA 00 R MP PA 00 RM MP PA 00 R MP PA 00 RM PNP (light- and dark-on) Connection Cable m Connector M Cable m Connector M Range adjustment Yes Optical data ) Range Emitter 0,5...,5 m (retroreflector OZR 00) Visible-red LED, 660 nm, pulsed, with polarizing filter Electrical data ) Supply voltage U S Allowable ripple Current consumption (without load) Max. load current I L Residual voltage Max. switching frequency 0...30 VDC +/- 0% of U SP < 5 ma 00 ma <,6 V 000 Hz Environmental data Sealing Temperatrer T A (operating and storage) Weight Plastic/Stainless steel IP 67-5...+65 0 C Connector M: ca.5/5 g, Cable m: ca. 00/0 g ) For product designation of sensors with optionssee designation code on page 3. ) When not otherwise noted, all technical data at T A = 5 0 C and U S = V. Retro- Range Retro- Range Retro- Range reflector reflector reflective tape OZR 00 0.5.5 m OZR 0 0.03.0 m OZR 0 0 m OZR 00 0.06.3 m OZR 0 0.09.5 m OZR 0 0 m OZR 003 0.09.0 m OZR 03 0.03 3. m OZR 03 0.5.3 m OZR 0 0.03 5. m OZR 0* 0.5 0.9 m OZR 05* 0.5.3 m * 30 cm long ELESTA optosensors 3 Subject to change without notice. 3E/06.0 3 Naugatuck Ave.Milford, CT 0660 P.03-878-000 F.03-878-058
0...30 VDC NPN / PNP light-on and dark-on output up to 5, m MP Dimensions (50 mm, M8 x ) Optical diagrams +0,5 m R M8X 3.5 50 3 max. 5 5 max. 9-0 Typical beam diameter (with retroreflector OZR 00) Diameter in (cm) Range in (m) 00 0 R Connector M Cable connection 3 Plastic housing Stainless steel housing 5 Range adjustment and function indicator,5 0,0 0, 0 Typical excess gain curve (with retroreflector OZR 00) Gain factor Range in (m) Wiring diagram NPN output PNP output + Supply voltage 0...30 V Light-on output Dark-on output - Supply voltage 3 Connector M Connection for Wire connector M color 3 Light-on output: Output energized when no object is present. Dark-on output: Output energized when object is present. 3E/06.0 Subject to change without notice. 33 ELESTA optosensors 3 Naugatuck Ave.Milford, CT 0660 P.03-878-000 F.03-878-058
Retro-reflective sensors with polarizing filters, right angle optics, M8 housing Range adjustable Glass protected optics Light reserve warning indicator Dual transistor outputs, NPN or PNP 000 Hz switching frequency Short-circuit protection, reverse polarity protection, and power-up output suppression Extended stainless steel case for protection of angle optic head (option) Connections: Straight cable, meter Connector, M EMC tested according to IEC 80 and EN5008-/EN 5008- Product designation Plastic housing ) Product designation Stainless steel ) Output MP NA 00 A3 MP NA 00 A3M MP NA 00 A3 MP NA 00 A3M NPN (light- and dark-on) MP PA 00 A3 MP PA 00 A3M MP PA 00 A3 MP PA 00 A3M PNP (light- and dark-on) Connection Cable m Connector M Cable m Connector M Range adjustment Yes Optical data ) Range Emitter 0,09... m (retroreflector OZR 00) Visible-red LED, 660 nm, pulsed, with polarizing filter Electrical data ) Supply voltage U S Allowable ripple Current consumption (without load) Max. load current I L Residual voltage Max. switching frequency 0...30 VDC +/- 0% of U SP < 5 ma 00 ma <,6 V 000 Hz Environmental data Sealing Temperatrer T A (operating and storage) Weight Plastic/Stainless steel IP 67-5...+65 0 C Connector M: ca.5/5 g, Cable m: ca. 00/0 g ) For product designation of sensors with options see designation code on page 3. ) When not otherwise noted, all technical data at T A = 5 0 C and U S = V. Retro- Range Retro- Range Retro- Range reflector reflector reflective tape OZR 00 0.09.0 m OZR 0 0.03 3. m OZR 0 0 m OZR 00 0.08.9 m OZR 0 0.08. m OZR 0 0 m OZR 003 0.08 0.8 m OZR 03 0.03.6 m OZR 03 0.5.0 m OZR 0 0.03 3.9 m OZR 0* 0.5 0.7 m OZR 05* 0.5.0 m * 30 cm long ELESTA optosensors 3 Subject to change without notice. 3E/06.0 3 Naugatuck Ave.Milford, CT 0660 P.03-878-000 F.03-878-058
0...30 VDC NPN / PNP light-on and dark-on output up to 3,9 m MP right angle optics Dimensions (60.5 mm, M8 x ) Optical diagrams +0 m M8X A3 50 0.5.5 3 max. 5 3 5 max. 69.5-0 Typical beam diameter (with retroreflector OZR 00) Diameter in (cm) Range in (m) 00 A3 0 Connector M Cable connection 3 Plastic housing Stainless steel housing 5 Range adjustment and function indicator,5 0,0 0, 0 Typical excess gain curve (with retroreflector OZR 00) Gain factor Range in (m) Wiring diagram NPN output PNP output + Supply voltage 0...30 V Light-on output Dark-on output - Supply voltage 3 Connector M Connection for Wire connector M color 3 Light-on output: Output energized when no object is present. Dark-on output: Output energized when object is present. 3E/06.0 Subject to change without notice. 35 ELESTA optosensors 3 Naugatuck Ave.Milford, CT 0660 P.03-878-000 F.03-878-058
Retro-reflective sensors with polarizing filters, for transparent objects, M8 housing Increased switching accuracy for detecting glass or transparent plastics Range adjustable Light reserve warning indicator Dual transistor outputs, NPN or PNP 000 Hz switching frequency Short-circuit protection, reverse polarity protection, and power-up output suppression Connections: Straight cable, meter Connector, M EMC tested according to IEC 80 and EN5008-/EN 5008- Product designation Plastic housing ) Product designation Stainless steel ) Output Connection MC NA 00 R5 MC NA 00 R5M Cable m MC NA 00 R5 MC NA 00 R5M NPN (light- and dark-on) Connector M MC PA 00 R5 MC PA 00 R5M Cable m MC PA 00 R5 MC PA 00 R5M PNP (light- and dark-on) Connector M Range adjustment Optical data ) Range Emitter Electrical data ) Supply voltage U S Allowable ripple Current consumption (without load) Max. load current I L Residual voltage Max. switching frequency Yes 0,05...3,5 m (retroreflector OZR 0) Visible-red LED, 660 nm, pulsed, with polarizing filter 0...30 VDC +/- 0% of U SP < 5 ma 00 ma <,6 V 000 Hz Environmental data Sealing Temperatrer T A (operating and storage) Weight Plastic/Stainless steel IP 67-5...+65 0 C Connector M: ca.5/5 g, Cable m: ca. 00/0 g ) For product designation of sensors with options see designation code on page 3. ) When not otherwise noted, all technical data at T A = 5 0 C and U S = V. Technical explanation To detect very transparent objects, best results are obtained, when decreasing the range adjustment of the sensor to the threshold, between a continuously lit function indicator and a blinking function indicator. In this condition (function indicator blinking) a glass window inserted into the optical path, will be reliably detected. Retro- Range Retro- Range Retro- Range reflector reflector reflective tape OZR 00* 0.5.5 m OZR 0 0.08.5 m OZR 0 0 m OZR 00 0.0. m OZR 0 0.08. m OZR 0 0 m OZR 003 0 m OZR 03 0.03.6 m OZR 03 0..0 m OZR 0 0.05 3.5 m OZR 0 0 m OZR 05** 0. 0.8 m * not recomended for bottle detection ** 30 cm long ELESTA optosensors 36 Subject to change without notice. 3E/06.0 3 Naugatuck Ave.Milford, CT 0660 P.03-878-000 F.03-878-058
0...30 VDC NPN / PNP light-on and dark-on output up to 3,5 m MC Dimensions (50 mm, M8 x ) Optical diagrams +0 3,5 m R5 M8X 3.5 50 3 max. 5 5 max. 9-0 Typical beam diameter (with retroreflector OZR 0) Diameter in (cm) Range in (m) 00 0 R5 Connector M Cable connection 3 Plastic housing Stainless steel housing 5 Range adjustment and function indicator,5 0,0 0, 0 Typical excess gain curve (with retroreflector OZR 0) Gain factor Range in (m) Wiring diagram NPN output PNP output + Supply voltage 0...30 V Light-on output Dark-on output - Supply voltage 3 Connector M Connection for Wire connector M color 3 Light-on output: Output energized when no object is present. Dark-on output: Output energized when object is present. 3E/06.0 Subject to change without notice. 37 ELESTA optosensors 3 Naugatuck Ave.Milford, CT 0660 P.03-878-000 F.03-878-058