CHAPTER welding WELDING Transformer technology power sources EASYMIG 0 / / / DUAL page MAXISTAR 0 M / 00 M / 0 T / 0 T page BLUMIG C / C / C / C / C / C page BLUMIG 0 S / S / 0 S / 0 S page TF 00 / 00 / 00 H (dévidoir pour BLUMIG S ) page 0 Inverter technology power sources PRECISA 0 page TORCHES Torches page Wear parts for torches page Options and complements Roller for wire feeding device, pressure regulators / flowmeter etc... page SOLID WIRES For non or low alloyed carbon steels welding STEELMIG G STEELMIG G GALVAMIG TENOMIG For stainless steels welding INOXMIG 0 L / L / 0 For aluminium and light alloys welding ALUMIG AG For copper-aluminium alloys welding COPPERMIG For hard surfacing HARDMIG 00
Compact installations (integrated wire feeder) for semi-automatic welding. Transformer technology. Single-phase input voltage. EASYMIG 0 EASYMIG / / 0 DUAL The installations of the EASYMIG range are dedicated to small jobs requiring a light weight and compact equipment, easy to install. Available in versions with or without gas, the EASYMIG installations are equipped with the essantial accessories needed for an immediate use. Input voltage: 0 V single-phase. Wire feeder device: rollers plate. Simple: adjustment of the intensity with switch and regulation of the wire speed with potentiometer. Versatile: the EASYMIG DUAL installations can weld with steel, stainless steel and aluminium solid wires as well as gasless cored wires. The EASYMIG 0 is dedicated to weld only gasless cored wires. Complete: delivered with torch and all accessories for immediate use. Easy to move: equipped with handle and wheels for an easier displacement. EASYMIG 0 Cat. nr : W 000 EN 0. EN 0.0 PORTABLE FOR INTERVENTIONS EASYMIG DUAL Cat. nr : W 000 0 EASYMIG DUAL (with wheels) Cat. nr : W 000 MIG / MAG WELDING Handle for transport. On/off switch. Power switch. Wire feed setting. Primary cable. Equipped earth cable. Built-in torch. EASYMIG 0 DUAL Cat. nr : W 000 Input voltage EASYMIG 0 EASYMIG DUAL EASYMIG DUAL EASYMIG 0 DUAL 0 V single-phase (0-0 Hz) Primary consumption* - A 0 A A A Power*. kva.0 kva. kva. kva Effective consumption. A. A. A 0 A Welding voltage - 0 V 0 - V 0 - V - V Welding current 0-0 A 0-0 A 0 - A 0-0 A Duty cycle 0 A ( %) 0 A (%) A ( %) 0 A (%) Adjustments positions Protection class IP IP Dimensions (mm) x 0 x 00 0 x 0 x 0 0 x 0 x 0 0 x 0 x 0 Weight kg kg kg kg * at maximum welding intensity Wear parts for torches see page Wire-feeder roller see page Delivered equipped with: electric cable, equipped earh cable, and buit-in torch, handle and wheels (wheels on & 0) rollers plate, safety instruction for use and maintenance manual.
Compact installations (integrated wire feeder) for semi-automatic welding. Transformer technology. Single-phase (M) or three-phase (T) input voltage. MAXISTAR 0 M / 00 M MAXISTAR 0 T / 0 T The MAXISTAR are semi-automatic welding installations. They are aimed to welding applications in workshops or to outdoor works. Input voltage: 0 V single-phase MAXISTAR 0 M or 00 V three-phase. Cat. nr : W 000 Mode: continuous or point. Wire feeder device: rollers plate. MAXISTAR 0 M TEC* Simple: adjustment of the intensity Cat. nr : W 000 with switch and regulation of the *With European connector wire speed with potentiometer. MAXISTAR 00 M Versatile: welding with steel, Cat. nr : W 000 stainless steel and aluminium wires. Powerful: copper cooled transformer. Complete: delivered with wheels and handle. INTEGRATED WIRE FEEDER OCCASIONAL USE EN 0. EN 0.0 MIG / MAG WELDING Thermal safety indicator. Switch on/off. Power switch. Point adjustment. Stick-out adjustment. Starting speed regulation. Wire speed. European connection for torch. MAXISTAR 0 T Cat. nr : W 000 MAXISTAR 0 T Cat. nr : W 000 MAXISTAR 0 M MAXISTAR 00 M MAXISTAR 0 T MAXISTAR 0 T Input voltage 0/0 Hz 0 V - single-phase 00 V - three-phase Primary consumption* - A A A 0 A Power*. kva. kva. kva. kva Effective consumption. A A. A. A Adjustments positions Welding voltage - V - V - V - V Welding current 0-0 A - 0 A - 0 A - 0 A Steel wire diameter 0. - 0. mm 0. - 0. mm** 0. -.0 mm 0. -.0 mm Duty cycle at 0 % 0 A ( %) 0 A ( %) 00 A ( %) 00 A at 0 C at 0 % A 00 A 0 A 0 A at 00 % 0 A A 00 A 0 A Protection class IP IP Dimensions (mm) 0 x 0 x 0 00 x 0 x 0 Weight kg kg kg kg * at maximum welding intensity **.0 mm possible Torches see page Rollers see page Delivered equipped with: electric cable, equipped earh cable, rollers plate for wire 0. - 0. mm, safety instruction for use and maintenance manual, torch (only for MAXISTAR 0 M).
Compact installations (integrated wire feeder) for MIG-MAG semi-automatic welding. Transformer technology. Single-phase or three-phase input voltage. BLUMIG C / C - (single-phase) C / C / C / C - (three-phase) The BLUMIG are semi-automatic welding installations. Robust and powerful, they provide the best performances on the market and will answer all your needs. BUILT IN WIRE FEEDER INTENSIVE USE Input voltage: 0 V single-phase and 0 00 V three-phase. Mode: T / T / Point. Wire feeder device: rollers plate. Simple: adjustment of the intensity with switch and regulation of the wire speed with potentiometer. BLUMIG C Digital display: included on the BLUMIG and in option for other ones. Cat. nr : W 000 Versatile: all kind of gas. BLUMIG C Powerful: copper cooled transformer. Cat. nr : W 000 EN 0. EN 0.0 MIG / MAG WELDING BLUMIG BLUMIG BLUMIG BLUMIG C BLUMIG C C C ALU C Input voltage 0/0 Hz 0 V single-phase 0 V - 0 V three-phase Primary consumption* - A A - A - A - A Power*. kva 0 kva. kva kva. kva Effective consumption A A 0 - A -. A - A Adjustments positions 0 0 Welding voltage - V 0 - V - V - 0 V - V Welding current 0-00 A 0-0 A - 00 A - 0 A - 0 A Steel wire diameter 0. -.0 mm 0. -.0 mm** 0. -.0 mm 0. -.0 mm** 0. -. mm Duty cycle at 0 % 00 A (%) 0 A 00 A 0 A 00 A at 0 C at 0 % 0 A A 0 A 0 A 0 A at 00 % 00 A 0 A 0 A 0 A 0 A Protection class IP Selection T / T / point. Point adjustment. Displays. Stick-out adjustment. Wire speed. Starting speed regulation. Power switch. Switch on/off. European connection for torch. Dimensions (mm) 00 X 0 X 0 0 x 0 x 0 Weight kg kg kg 0 kg kg * at maximum welding intensity **. mm possible * version specially designed for aluminium applications with a push-pull torch. BLUMIG C Cat. nr : W 000 BLUMIG C ALU* Cat. nr : W 000 BLUMIG C Cat. nr : W 000 BLUMIG C Cat. nr : W 000 0 Torches see page Rollers see page Delivered equipped with: electric cable, equipped earh cable, rollers 0.-.0 mm, safety instruction for use and maintenance manual.
Separated wire feeder installations for semi-automatic welding. Transformer technology. Three-phase input voltage. BLUMIG 0 S / S BLUMIG 0 S / 0 S The BLUMIG are semi-automatic welding installations. Robust and powerful, they provide the best performances on the market and will answer all your needs. Input voltage: 0 V 00 V three-phase. BLUMIG 0 S Mode: T / T / Point. Wire feeder device: rollers plate. Perfect starting: possibility to adjust the starting speed. BLUMIG S Stick-out: adjustable with potentiometer. Simple: adjustment of the intensity with switch and regulation of the wire speed with potentiometer. BLUMIG 0 S Digital display: precise adjustment and optimal reading. Versatile: for all kind of solid or flux cored wires welding. Powerful: copper cooled transformer. Safety: protection class IP. Comfortable in use: due to its pivoting wire feed unit support. SEPARATED WIRE FEEDER INTENSIVE USE Cat. nr: W 000 0 (power source only) Cat. nr: W 000 (power source only) Cat. nr: W 000 (power source only) EN 0. EN 0.0 MIG / MAG WELDING Selection T / T / point. Point adjustment. Wire speed. Stick-out adjustment. Starting speed regulation. Digital displays. European connection for torch Power and on/off switch. Power switch (precise adjustment). BLUMIG 0 S Cat. nr: W 000 (power source only) BLUMIG 0 S BLUMIG S BLUMIG 0 S BLUMIG S / SH Compatible wire feeders TF 00 - TF 00 TF 00 - TF 00H Input voltage 0 Hz 0 V - 00 V three-phase Primary consumption* - - A - A - A 0 - A Power* kva. kva kva kva Effective consumption -. A 0 - A - A - 0 A Adjustments positions 0 0 Welding voltage - 0 V - V - V - V Welding current - 0 A 0-00 A - 0 A 0-0 A Steel wire diameter 0. -.0 mm** 0. -. mm 0. -. mm 0. -. mm Duty cycle at 0 % 0 A 00 A 0 A 0 A at 0 C at 0 % 0 A 0 A 0 A A at 00 % 0 A 0 A 0 A 0 A Protection class IP Dimensions (mm) 00 x 0 x 0 00 x 0 x 00 Weight 0 kg kg kg kg * at maximum welding intensity **. mm possible () version prepared for cooling unit BLUMIG 0 SH () Cat. nr: W 000 (power source only) See: Wire feeder page 0 Torches page Rollers page Delivered equipped with: electric cable, equipped earh cable, safety instruction for use and maintenance manual.
Wire feeder with cables for BLUMIG S power sources. TF 00 / 00 / 00H The TF wire feeders are compatible with all the BLUMIG S power sources range. They are delivered as standard with a sheathed cable. Sealed structure: protection of the wire feeding system. Digital display: A/V included on TF 00 and TF 00H. Comfortable: adjustment on the front panel, and pivoting wire feed unit support which makes easier the storage and the orientation of the wire feeder. Efficient wire feeding: rollers plate. Safety: perfect locking of the wire feeding compartment. Quick: bi-stripped cable. Robust: sheathed cable. TF 00 - TF 00 - TF 00 H Digital display A/V. Wire speed. Mode T / T / point. Point adjustment. Starting speed. Stick-out adjustment. Test / Purge gas / Wire advance. Torch connection. Water inlet / outlet on TF 00H type. Rollers see page WIRE FEEDER WITH CABLES FOR BLUMIG S. TF 00 AIR TF 00 AIR TF 00 WATER Digital display A/V - Wheels Equipped for water cooled torch - - Rollers Steel 0./.0 mm Cat. no. TF 00 TF 00 TF 00 H Cable length m W 000 W 000 W 000 Cable length 0 m W 000 W 000 W 000 0 Cable length 0 m - W 000 W 000 0
The MX 0 SG / PRECISA 0 is a multi-process inverter technology installation. Its weight, power and primary single-phase input voltage, make the PRECISA 0 the specialist for quick interventions. Input voltage: 0 V single-phase. Display: digital A / V. Multi-processes: MIG / MMA / TIG DC. Wire feeder device: rollers. Professional: robust structure with handle for transportation. Programmable: programs available. Polarity inversion: for welding applications with gasless flux cored wire. Wire spool: D 00. Torch MIG: with European connectors or Spool Gun. Multi-process semi-automatic welding power source. Portable with inverter technology. Single-phase input voltage. MX 0 SG / PRECISA 0 Digital display. Program mode buttons. Potentiometer. MIG / MMA / TIG DC selection. Selection T / T / point. European connector for torch. Spool Gun connection control. Adjustment of the welding power. Wire speed regulation. PORTABLE MULTI-PROCESSES Cat. nr : W 000 EN 0. EN 0.0 MIG / MAG WELDING PRECISA 0 Input voltage 0/0 Hz 0 V single-phase Primary consumption* - Power* A /. kva Effective consumption A Welding voltage - V Welding current 0-00 A Duty cycle at % 00 A 0 % A 00 % A Wire diameter 0, to,0 mm Protection class IP Dimensions x 0 x 0 mm Weight kg * at maximum welding intensity Torches see page Rollers see page Delivered equipped with: electric cable, equipped earth cable, rollers for wire 0. /.0 mm, safety instruction for use and maintenance manual.
torches. TORCHES A complete range of torches for MIG MAG welding, designed to answer the needs in semi-automatic welding. WMT A : for car bodies due to its compactness. WMT A : for metal iron works and maintenance jobs. EN 0. EN 0. TORCHES TORCHES WMT A : for boiler making, mechanowelding and metal frames manufacturing. WMT 00 W : for intensive works needing a water cooling of the torch. Great handiness. Ergonomic handle for a perfect catch. Flexibility due to its back knee joint. Wear parts according to European standard. European connector. Resting hook. TORCH WMT A WMT A WMT A WMT 00 W Cooling air air air water Duty cycle at 0% CO 0 A 0 A 0 A 00 A Ar +CO 0 A 00 A 0 A 0 A Voltage class L - Suitable wires Steel 0. à.0 mm Steel 0. à. mm Steel 0. à. mm Steel 0. à. mm - Alum..0 à. mm Alum..0 à. mm Alum..0 à. mm Gas flow 0 à l/min 0 à l/min 0 à l/min 0 à l/min Delivered equipped with Contact tip Steel 0. mm Steel.0 mm Steel. mm Steel. mm Nozzle (diameter). mm.0 mm.0 mm. mm Sheath For steel wire For steel wire For steel wire For steel wire 0. - 0. mm.0 -. mm.0 -. mm.0 -. mm Cat. nr WMT A WMT A WMT A WMT 00 W Length m W 000 00 00 W 000 00 0 W 000 00 0 W 000 00 0 Length m W 000 00 0 W 000 00 0 W 000 00 0 W 000 00 0 Length m - W 000 00 0 W 000 00 0 W 000 00 0
Wear parts for torches. TORCHES. Nozzle. Contact tip. Clamp. Diffuser WEAR PARTS : PU TYPES Ø Cat. nr WMT A WMT A WMT A WMT 00 W 0. AC W 000 00 0 M x steel 0. AC W 000 00.0 AC W 000 00 0. AC W 000 00 M x steel.0 AC W 000 00 M x alu. AC W 000 00.0 Al W 000 00 0 CONTACT. Al W 000 00 TIP 0. AC W 000 00 M x 0 steel.0 AC W 000 00. AC W 000 00. AC W 000 00.0 Al W 000 00 M x 0 alu. Al W 000 00. Al W 000 00 M x - W 000 00 0 CLAMP M x - W 000 00 M x - W 000 00 classical - W 000 00 0 high temp. - W 000 00 DIFFUSER ceramics - W 000 00 classical - W 000 00 high temp. - W 000 00 ceramics - W 000 00 0.0 mm W 000 00. mm W 000 00.0 mm W 000 00 0.0 mm W 000 00 NOZZLE conical.0 mm W 000 00.0 mm W 000 00.0 mm W 000 00 0.0 mm W 000 00. mm W 000 00 steel - length m 0. - 0, W 000 00 0 steel - length m.0 -. W 000 00 SHEATH alu - length m 0. - 0, W 000 00 alu - length m.0 -. W 000 00 alu - length m.0 -. W 000 00 WEAR PARTS FOR TORCHES
Options and complements for power sources.. ROLLERS FOR WIRE FEEDING DEVICE OPTIONS EASYMIG / MAXISTAR ranges Acier 0. / 0. mm W 000 0.0 /. mm W 000 BLUMIG/PRECISA 00 ranges Steel Alu Flux cored wire 0. mm W 000 00 0 - - 0. mm W 000 00 0 W 000 00 00 -.0 mm W 000 00 0 W 000 00 0 -. mm W 000 00 0 W 000 00 0 W 000 0 (.0 /. mm). mm W 000 - W 000 (. /. mm) PRECISA 0 ranges Steel 0. / 0. mm W 000.0 /. mm W 000 0. WELDING TORCHES EASYMIG/MAXISTAR ranges EASYMIG 0 EASYMIG / EASYMIG 0 MAXISTAR 0 Replacement torch W 000 W 000 W 000 W 000 MAXISTAR / BLUMIG / PRECISA ranges Length m Length m Length m WMT A (0 A at 0%) W 000 00 00 W 000 00 0 - WMT A (0 A at 0%) W 000 00 0 W 000 00 0 W 000 00 0 WMT A (0 A at 0%) W 000 00 0 W 000 00 0 W 000 00 0 WMT 00W* (00 A at 00%) W 000 00 0 W 000 00 0 W 000 00 0 * water cooled OPTIONS AND COMPLEMENTS FOR Length m Push Pull Gun PP 0 0 00 0 Length m Spool Gun SG 0 0 00 0 Spool Gun SG 00 0 00 0. DIGITAL DISPLAY FOR BLUMIG RANGE: W 000. COOLING UNIT FOR BLUMIG RANGE: W 000. POLARITY INVERSION FOR BLUMIG COMPACT AND MAXISTAR RANGES : W 000. PRESSURE REGULATOR / FLOWMETER France / Dom-Tom/ Portugal Italy For cylinder to be thrown - 0 00 00 Without pressure gauge - VRID0000 With pressure gauge - VRID0000 With pressure gauges W 000 VRID0000