4 Pole ( FORM C+ FORM A) Signal Relay for Central Switching/ Data Transmission FTR-B SERIES RoHS compliant FEATURES DISCONTINUED (8) 4 POLE MINIATURE RELAY Mounting space of 17mm with 4 pole relay, suitable for high density mounting. SAFETY STANDARD - UL/CSA recognized - Conforms to Bellcore specification & FCC part 68 - Conforms to IEC 69 / UL19 / EN69 spacing and high breakdown voltage Clearance: 1.mm Creepage: 1.6mm HIGH RELIABILITY Bifurcated gold overlay silver alloy HIGH HEAT RESISTANCE, FLAMMABILITY Flammability grade of 94V- materials employed AIR TIGHT CONSTRUCTION Air tight construction allows high resistance to various environments and to clean the relay SMT VERSION Surface mount type available on request RoHS compliant since date code: 43B8 Please see page 7 for more information ORDERING INFORMATION FTR-B M A 1 Z ** [Example] (a) (b) (c) (d) (e) (f) Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking FTR-BMA1Z BMA1Z
SAFETY STANDARD AND FILE NUMBERS UL8, 19 (File No. E6361) C. No. 14, No. 9 (File No. LR434) Please request when the approval markings are required on the cover. Nominal voltage Contact rating. A 1 VAC 4. to 1 VDC 1 A 3 VDC resistive.3 A 1 VDC Clearance 1.mm coil a- contacts Creepage 1.6mm coil - contacts Remarks - working voltage: 1V - relay inside and outside - pollution degree "" COIL DATA CHART FTR-F Series FTR-FAKT FTR-FAK6T FTR-FAK9T FTR-FAK1T FTR-FAK4T FTR-FAK48T MODEL FTR-H Series FTR-HAKT FTR-HAK6T FTR-HAK9T FTR-HAK1T FTR-HAK4T FTR-HAK48T DISCONTINUED (8) Nominal Voltage Coil Resistance (± %) Must Operate Voltage Must Release Voltage VDC 47Ω 3.VDC.VDC 6VDC 68Ω 4.VDC.3VDC 9VDC 1Ω 6.3VDC.4VDC 1VDC 7Ω 8.4VDC.6VDC 4VDC 1, Ω 16.8VDC 1.VDC 48VDC 4,4Ω 33.6VDC.4VDC
SPECIFICATIONS Item Contact Arrangement Form C + Form A FTR-B Series Material Resistance (initial) Rating (resistive) Gold overlay Silver alloy Maximum 7mΩ (at 1A 6VDC) 3VDC 1A / 1VAC.A Maximum Switching Power Maximum Switching Voltage Maximum Switching Current 3W / VA 1VDC / 1VAC 1A Time Value Maximum Carrying Current 1.A O perate Time ( at nominal voltage) Maximum ms DISCONTINUED (8) Coil R elease Time ( at nominal voltage) Maximum ms O perating Temperature -4 C to +8 C (no frost) I nsulation Resistance (at VDC ) Life Vibration Dielectric Strength Minimum 1, MΩ 7 VAC 1 Min. (open contacts) VAC 1 Min. (adjacent contacts) 1, VAC 1 Min. (coil-contacts) 6 Mechanical x operations minimum Electrical 3 x operations minimum at 3VDC 1A 3 x operations minimum at 1VDC.A M isoperation - Hz (double amplitude of 1.mm) E ndurance - Hz (double amplitude of 1.mm) Shock Weight Misoperation Endurance m/ s (11±1ms) m/ s (6±1ms) Approximately 3.9g
CHARACTERISTIC DATA Time (ms) 8 6 4 Operation (return time characteristics) Operation time Release..4.6.8 Coil Power (W) Coil Temperature Rise ( C) 8 6 4 Coil Temperature Rise Contact carrying current: 1A Contact carrying current: A..4.6.8 Coil Power (W) Nominal Voltage Multiplying Factor (%) Ambient Temperature (maximum applied voltage, operating voltage characteristics).4.. 1.8 1.6 1.4 1. 1..8.6 4 6 8 Contact carrying current: A Contact carrying current: 1A (hot coil) (cool coil) Ambient Temperature ( C) 3 Maximum Switching Power Life Curve Contact Current (A) 1..4.3. AC Resistive DC Resistive Operation (x 4 ) 3 1 VAC Resistive 3 VDC Resistive.1 1 3 Contact Voltage (V)..4.6.8 1. 1. Contact Current (A) REFERENCE DATA Distribution (%) 8 6 4 Distribution of Operate and Release Voltage FTR-BMA4.Z n= Operate Release Distribution (%) 8 6 4 Distribution of Operate and Release Time FTR-BMA4.Z n= Operate Release Contact Current (A) 3 1..4.3. DISCONTINUED (8) Maximum Switching Power AC Resistive DC Resistive 3 4 6 7 8 9 Nominal Voltage Multiplying Factor (%) 1 3 4 6 Time (ms).1 1 3 Contact Voltage (V)
REFERENCE DATA Nominal Voltage Multiplying Factor (%) 4. 3.. 1. Mechanical Life Test Nominal Voltage Multiplying Factor (%) Contact Resistance (m ) 4. 3.. 1. Initial Electrical Life Test Release Voltage FBR-BMA4.Z n= 3 operations/min. 1 VAC.A (resistive load) Make Break Operation (x 4 ) Nominal Voltage Multiplying Factor (%) Contact Resistance (m ) 4. 3.. 1. Initial Electrical Life Test DISCONTINUED (8) Contact Resistance (m ) Release Voltage FBR-BMA4.Z n= operations/min. Make Break Initial 1 Operation (x 4 ) Release Voltage FBR-BMA4.Z n= 3 operations/min. 3 VDC 1A (resistive load) Make Break Operation (x 4 ) DIMENSIONS Through hole type Dimensions Schematics (BOTTOM VIEW) PC board mounting hole layout (BOTTOM VIEW) Orientation mark Surface mount type Dimensions Schematics (TOP VIEW) PC board mounting hole layout (TOP VIEW) Orientation mark
RECOMMENDED CONDITION (Temperature Profile) IRS (Infrared Reflow Soldering) VPS (Vapor Phase Soldering) Temperature (C) T 3 T T 1 preheating soldering cooling T 3 = 4C max. T = C max. T 1 = 16C max. Temperature (C) T 3 T T 1 preheating soldering cooling T 3 = C maximum T = 16C maximum T 1 = C maximum sec maximum 3 sec Max. 6 sec Max. 6 sec Max. 9 sec Max. PACKAGING Tape dimensions DISCONTINUED (8) 1C maximum Note: ø 1. ø. 16 4.4 8.4 3 17.9 14. 1.Temperature profiles show the temperature of PC board surface..please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. 1.7 11.7 Tape feeding.7 Reel Dimensions ø 38 ø 13 Top cover tape Embossed carrying tape Perforation Parts box Dimensions: mm General tolerance: ±. Quantity of one reel: pieces
RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fcai.fujitsu.com/pdf/leadfreeletter.pdf) Lead free solder paste currently used in relays is Sn-3.Ag-.Cu. From February forward Sn-3.Cu-Ni will be used for FTRB3 and FTR-B4 series relays. Most signal and some power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials that are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE). It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). LF is marked on each outer and inner carton. (No marking on individual relays). To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. We will ship leaded relays as long as the leaded relay inventory exists. DISCONTINUED (8). Recommended Lead Free Solder Profile Recommended solder paste Sn-3.Ag-.Cu and Sn-3. Cu-Ni (only FTR-B3 and FTR-B4 from February ) Reflow Solder condtion Flow Solder condtion: Pre-heating: maximum C Soldering: dip within sec. at 6 C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 36 C Duration: maximum 3 sec. 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker We highly recommend that you confirm your actual solder conditions SnAgCu solder is known as low riskof tin whisker. No considerable length whisker was found by our in-house test.
Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-, Higashigotanda -chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 449-7 Fax: (81-3) 449-66 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 13 WV Hoofddorp Netherlands Tel: (31-3) 69 Fax: (31-3) 69 Email: info@fceu.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. E. Caribbean Drive Sunnyvale, CA 9489 U.S.A. Tel: (1-48) 74-49 Fax: (1-48) 74-497 Email: marcom@fcai.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. E Pasir Panjang Road #4-1 Citilink Warehouse Complex Singapore 1189 Tel: (6) 637-86 Fax: (6) 673-31 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ DISCONTINUED (8) 6 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 3/1/6.