APPLICATION GUIDE WWW.CELICIOUS.COM
CONTENT SMARTPHONE APPLICATION GUIDE 3 NEW CELICIOUS TOOLKIT 4 TABLET APPLICATION GUIDE 5 LAPTOP APPLICATION GUIDE 6
SMARTPHONE - APPLICATION INSTRUCTIONS Before you start applying your screen protector make sure that you are in a clean, dust-free and bright environment. Please read all the instructions before applying the screen protector. For video instructions, please click here
NEW CELICIOUS TOOLKIT TOOLKIT INCLUDES ALIGNMENT TAB X4 PRE APPLICATION DUST REMOVER X1 PROTECTIVE LAYER REMOVER X2 POST APPLICATION DUST REMOVER X2 FIBRE CLOTH X1
TABLET - APPLICATION INSTRUCTIONS Before you start applying your screen protector, please grab a credit/store card as we will need it during the application process. For optimal results, please ensure you are in a bright and clean area. 1 Align the screen protector against your device, ensuring the adhesive side tab attached to the protector is placed on the screen. 2 Begin attaching the alignment tabs onto one side of your tablet and fix them once you have achieved perfect alignment. Please be patient during this process. Please note there is no set standard to the amount of alignment tabs used during this process. 3 4 Lift the protector from the opposite end of the alignment tabs. Clean your tablet screen using the provided microfiber cloth. Ensure that the screen is fully relieved from all dust particles by tapping onto the screen using the large pre application dust removing tab wherever particles are visible. NOTICE! If you miss any particles, do not worry, we will guide you through removing them towards at the end this guide. 5 6 Once the cleaning process is complete, place the protective layer remover tab on the adhesive side layer, towards the top edge closest to your device and peel the protective layer backwards by lifting the tab to partially uncover the adhesive area of the protector. Wrap the microfiber cloth around your credit/store card. Fold the protector back onto your screen and apply pressure onto the exposed area whilst simultaneously pulling the protective layer from beneath. Continue this process until you have fully removed the first protective layer from under the protector. NOTICE! If air bubbles appear during this process, lift the protector towards the bubble and re-apply by working the card over that area. 7 8 Place another protective layer removing tab onto a corner of your device away from the attached alignment tabs and peel off the protective film slowly. If the screen protector is too attached to the protective layer and starts lifting off the device, apply pressure onto the bubble to separate the layers from each other. If you spot any dust bubbles after removing the protective layer, use the post application dust remover tabs to lift the protector from the closest edge using the first tab and tap the dust particle using the second tab. This concludes your application process. NOTICE! If there are any air bubbles still apparent, slide them to the nearest edge using the cloth. Some bubbles may take up to 24 hours to settle. For video instructions, please click here
LAPTOP - APPLICATION INSTRUCTIONS Before you start applying your screen protector, please grab a credit/store card as we will need it during the application process. For optimal results, please ensure you are in a bright and clean area. 1 Align the screen protector against your device, ensuring the adhesive side tab attached to the protector is placed on the screen. 2 3 4 Begin attaching the alignment tabs onto one side of your laptop and fix them once you have achieved perfect alignment. Please be patient during this process. Lift the protector from the opposite end of the alignment tabs. Clean your laptop screen using the provided microfiber cloth. Ensure that the screen is fully relieved from all dust particles by tapping onto the screen using the large pre application dust removing tab wherever particles are visible. NOTICE! If you miss any particles, do not worry, we will guide you through removing them towards at the end this guide. 5 6 Once the cleaning process is complete, place the protective layer remover tab on the adhesive side layer, towards the top edge closest to your device and peel the protective layer backwards by lifting the tab to partially uncover the adhesive area of the protector. Wrap the microfiber cloth around your credit/store card. Fold the protector back onto your screen and apply pressure onto the exposed area whilst simultaneously pulling the protective layer from beneath. Continue this process until you have fully removed the first protective layer from under the protector. NOTICE! If air bubbles appear during this process, lift the protector towards the bubble and re-apply by working the card over that area. 7 8 Place another protective layer removing tab onto a corner of your device away from the attached alignment tabs and peel off the protective film slowly. If the screen protector is too attached to the protective layer and starts lifting off the device, apply pressure onto the bubble to separate the layers from each other. If you spot any dust bubbles after removing the protective layer, use the post application dust remover tabs to lift the protector from the closest edge using the first tab and tap the dust particle using the second tab. This concludes your application process. NOTICE! If there are any air bubbles still apparent, slide them to the nearest edge using the cloth. Some bubbles may take up to 24 hours to settle. For video instructions, please click here