Thank you for shopping with GLT, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried to make assembling this item as quick and painless as possible. ramley ookcase L4305 Hopefully our efforts will have been worthwhile and you ll sail through the whole process. ut if it all feels a bit too much like hard work, then we do have an assembly company we can recommend: the Flatpack onstruction ompany offers a nationwide service and can be contacted on 0843 289 4951 or few important pointers before you start: Please read the instructions right through before you start, and check separating all the hardware into piles makes it easier to be sure that everything is present and correct. Make sure you have the right tools. llen keys are provided if required, you need at the beginning of the instructions. It s a good idea to build the unit in the room where you are going to be using it, to avoid the need to move it after it s been assembled. o not throw away any packing materials until assembly is complete, just in case you accidentally discard smaller parts or hardware. easy - medium - hard one-person job V2 30/06/2017 1
Safety Warnings: dult assembly required. Unassembled product contains small parts which may present a choking hazard. hildren should be kept away from the product during assembly to avoid any possible of injury. ssemble and use on a flat and level surface This product is heavy, we recommend that you build it where you are planning to use it. O NOT use power tools in the assembly of this product as there is a risk of over-tightening and consequently splitting of the wood. To avoid possible injury from tipping, O NOT allow children to climb on the product. lways use the wall straps provided. Wall fixings not included. Please use appropriate fixings that are suitable for the wall type. If in doubt, please seek professional advice. heck all fixtures and fittings regularly and tighten as necessary. Please retain these instructions for future reference. ustomer Service: If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLT ustomer Services on 0344 848 6000 immediately. We do stock spare hardware packs at our warehouse, so we should be able to send you a replacement pack immediately if required. Product are: Wipe clean using a soft damp cloth followed by a dry cloth. o NOT use cleaning products which contain ammonia, solvents or abrasive material. o NOT expose the item to extremes of heat and humidity. ould we do better? If there is anything you think could be improved in these instructions or in the assembly of this product we d be grateful if you could let us know; we ll pass any helpful hints and tips on to other customers via our website and update the instructions. ll you need to do is drop us a line at instructions@gltc.co.uk Thank you 2
omponent heck List omponent heck List #2 x 16 Wooden owels 25mm x 2 arrel Nuts 10mm x 1 ase Panel x 1 ivider Panel #3 x 2 olts 53mm x 12 am owels 35mm E x 1 Side Panel G x 1 Side Panel x 12 am Locks 14mm #7 x 12 Screws 16mm x 1 Support Panel x 1 llen Key x 8 Shelf Pegs F You will need (not supplied) x 1 Top Panel Phillips Head Screwdriver x 2 ack Panels H I x 1 Left Shelf Panel x 1 Right Shelf Panel 3
ssembly: Hardware for Step 1: Hardware for Step 2: 2x Wooden owels 6x am owels 2x #2 arrel Nuts 2x #3 olts 53mm #2 #2 #3 #3 #7 STEP 1: Locate divider panel () and insert 2x wooden dowels () and 2x barrel nuts (#2) where indicated. lign panel () to the middle of base panel () ensuring the cut out corner is nearest the floor. ttach with 2x 53mm bolts (#3) using the allen key provided. 4 STEP 2: ttach 6x cam dowels () to side panels and where indicated.
Hardware for Step 3: Hardware for Step 4: 2x Wooden owels 1x Wooden owels 3x am owels Ensure that the corner with the pilot hole is nearest the floor 3x am Locks E STEP 3: Insert 2x wooden dowels () to side panel ( ) and slot to panel (). Secure with 3x cam locks (). STEP 4: Insert 1x wooden dowel () to one of the ends of panel (E ) and slot this into side panel ( ) so that it sits in the cut out corner of the central divider panel (). 5
Hardware for Step 5: Hardware for Step 6: 3x Wooden owels 12x Screws 3x am Locks F F E STEP 5: Insert 3x wooden dowels () to side panel () where indicated. Slot in side panel () and secure with 3x cam locks (). 6 STEP 6: Place both back panels (F) on to the frame and ensure that the pilot holes are are lined up correctly. Secure with 12x screws 16mm (). Please note that there are 2x pilot holes on the outer leg panels to attach anti-tip straps included separately with this item.
Hardware for Step 7: Hardware for Step 8: 6x am owels 8x Wooden owels Ensure the grooved edge of the top panel slots the back panels in place. 6x am Locks G E G STEP 7: Prepare top panel (G) by inserting 6x cam dowels () where indicated. 7 STEP 8: Stand up the unit ready to attach the top panel. Insert 6x wooden dowels () and 6x cam locks () into the top of the unit where indicated. Lower the top panel (G) and secure the 6x cam locks () using a Philips screwdriver.
Hardware for Step 9: 8x Shelf Pegs G H I STEP 9: Insert 4x shelf pegs () to the desired shelf height on each side and slot the left and right shelf panels (H) and (I). 8 STEP 10: Your unit is ready to use. Please be aware that we advise that safety straps are used to secure this to the wall, for details on securing the unit to the wall see the nti-tip Kit guidance. lternative furniture safety straps are available at www.gltc.co.uk opyright 2017 G.L.T.. Ltd. ll rights reserved. Great Little Trading ompany and GLT are registered trade marks of G.L.T.. Limited.