Plate Door Furniture Door Furniture and General Hardware 3.71
1800 Series Square End Plate Furniture For a smart look choose this rectangular plate with bevelled edges and corners. It features concealed fixing on the outside plate. Application Designed for use with the Lockwood 3570 Series Mortice Locks and Latches. Features and Specifications Plates are not handed; lever may be reversed by removing stop screw, except those denoted by *. Dimensions 166 x 48 x 12mm Fixing Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Door Thickness External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. Refer to lockweb.com.au for information on fixing screw and spindle options for thicker doors. Finishes Standard Satin Chrome Brushed Non Standard Chrome Plate Polished Brass Polyester Powdercoat Other finishes on application. SC CP PB PPC 00 61* 00 20 32 40 41* 42* 43 44 45 48* 49 53* 54* 56* 57 59 60 61* 69 70 80 2878 32 41* 44 45 48* 50* 53* 55A 59 62 70 71 74 78 79 79B Levers and Knobs to Suit 2900 2901 2904 2939 For 80detailed 83information 90 regarding 91 94* brass levers 97 refer to page 3.100 20 32 40 41* 44 45 48* 50* 53* 55 59 62 70 71 74 78 79 79B 80 83 90 91 94* 97 * Denotes handed levers Plates 00 and 32 Functions 41* 42* 45 48* 49 51* 52* 53* 54 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1813 1814 57 59 60 61* 70 71 80 83 87 90 1815 1816 1820 1821 1822 1823 1878 1900 1901 1904 1905 1906 1907 1908 1909 1920 1921 1922 1938 1939 166 Plate Numbers marked red indicate no lever option 12 48 Plates and Functions Legend S3 FIRE RATED HIGH SECURITY DURABILITY ANTI-CORROSION Cylinder Hole Turnknob Slotted Turn Fixed Lever Disabled LED Indicating Turnknob Indicating Slotted Turn Lever 3.72
2800 Series Round End Plate Furniture A beautifully curved brass plate with bevelled edges and the benefit of concealed fixing on the external plate. Application Designed for use with Lockwood 3570 Series Mortice Locks and Latches. Features and Specifications Plates are not handed, lever may be reversed by removing stop screw, except those denoted by*. Dimensions 166 x 48 x 12mm Fixing Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. Door Thickness External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. Refer to lockweb.com.au for information on fixing screw and spindle options for thicker doors. Finishes Standard Satin Chrome Brushed Non Standard Chrome Plate Polished Brass Polyester Powdercoat Other finishes on application. SC CP PB PPC 00 61* 00 20 32 40 41* 42* 43 44 45 48* 53* 54* 56* 57 59 60 61* 69 70 32 41* 44 45 48* 50* 53* 55A 59 62 70 71 74 78 79 79B Levers and Knobs to Suit 80 83 90 91 94* 97 For detailed information regarding brass levers refer to page 3.100 20 32 40 41* 44 45 48* 50* 53* 55 59 62 70 71 74 78 79 79B 80 83 90 91 94* 97 * Denotes handed levers 00 32 Plates and Functions 41* 42* 45 48* 49 51* 52* 53* 2800 57 2801 592802 2803 60 2804 2805 61* 2806 70 2807 2808712809 281080 2813 83 87 12 S3 166 48 FIRE RATED HIGH SECURITY DURABILITY ANTI-CORROSION 2814 2815 2816 2820 2821 2822 2823 2878 2900 2901 2904 2905 2906 2907 2908 2909 2920 2921 2922 2939 Plate numbers marked red indicate no lever option 48 Plates and Functions Legend Cylinder Hole Fixed Lever Indicating Turnknob Turnknob Disabled Indicating Slotted Turn Slotted Turn LED Lever Door Furniture and General Hardware 3.73
1800 and 2800 Series Ordering Procedure Ordering Procedure Sample part number 1801/48LCP is made up of several sections. Choose your product by selecting an option from each section. For example: Lockwood 1800 and 2800 Series Plate Furniture Plate Type Plate Function Lever/ Knob Finish 18 01 / 48 L CP Plate Type Lever/Knob Type Finish Exterior Square End 18 Interior Square End 19 Exterior Round End 28 Interior Round End 29 Plate Function 20 53 *79 32 55 79B 40 59 80 41* 62 83 44 70 90 45 71 91 Chrome Plate Satin Chrome Brushed Polished Brass CP SC PB Cylinder Only 00 48* 74 94* Cylinder & Lever 01 50 78 97 Emergency Turn Only 02 * Denotes handed levers Emergency Turn & Lever 03 Turnknob & Lever 04 Lever Only 05 Turnknob Only 06 Plain Plate 07 Cylinder & Fixed Lever 08 Fixed Lever Only 09 Two Cylinders 10 Privacy Indicator Emergency Turn Only 13 Privacy Indicator Emergency Turn & Lever 14 Privacy Indicator Turnknob Only 15 Privacy Indicator Turnknob & Lever 16 Cylinder, Lever & LED 20 Cylinder, Fixed Lever & LED 21 Lever & LED 22 Cylinder & LED 23 Disabled Turn Only 38 Disabled Turn & Lever 39 Right Handed Left Handed NB: Omit if non-handed R L 3.74
Securafix Series Plate Furniture This unique fixing system provides concealed fixing on both sides of the door creating a more pleasing aesthetic whilst increasing the security of the installation. The plate tightening mechanism can be locked to prevent loosening, making Securafix furniture the ideal choice for style, security and durability. Application Lockwood 3670 Series Securafix Mortice Latches Features and Specifications All plates and levers are handed and are ordered as half sets. Fixing Lockwood plates are designed to fit back to back which are tightened from the front of the mortice lock by a hex key. Door Thickness Standard plates suit door thickness between 32 and 44mm. Refer to ordering procedure on page 3.76 for information regarding plates for use on thicker doors. Variations Securafix furniture is available on 1800 and 2800 Series Brass Plate Furniture. Finishes Standard Satin Chrome Brushed SC Levers and Knobs to Suit For detailed information regarding brass levers refer to page 3.100 20 32 40 41 44 45 48 53 55 Plates and Functions 59 62 70 71 50 74 78 79 79B 80 83 90 91 94 97 Non Standard Chrome Plate CP Polished Brass PB Polyester Powdercoat PC Other finishes on application. FIRE RATED DURABILITY S3 HIGH SECURITY ANTI-CORROSION 1800 1801 1804 1805 1820 1822 1839 1878 2800 2801 2804 2805 2820 2822 2839 2878 Plate numbers marked red indicate no lever option Plates and Functions Legend Cylinder Hole Turnknob Slotted Turn Fixed Lever Disabled LED Indicating Turnknob Indicating Slotted Turn Lever Door Furniture and General Hardware 3.75
Rose Door Furniture Securafix Series Ordering Procedure Ordering Procedure Sample part number 1801SF/20RCP55 is made up of several sections. Choose your product by selecting an option from each section. For example: Lockwood 1800 and 2800 Series Plate Furniture with Securafix Plate Function Securafix Lever/ Knob Finish Door Thickness 18 01 SF / 20 R CP 55 Plate Securafix Door Thickness 1800 Series Square End Plates 18 2800 Series Round End Plates 28 Function Cylinder & Lever 01 Turnknob & Lever 04 Lever Only 05 Cylinder, Lever & LED 20 Lever & LED 22 Disabled Turn & Lever 39 Securafix SF Lever/Knob Type 20 53* 79 32 55 79B 40 59 80 41* 62 83 44 70 90 45 71 91 48* 74 94* 50 78 97 Left Handed Right Handed Finish Chrome Plate Satin Chrome Brushed Polished Brass L R CP SC PB 32 45mm (No Suffix) 45 55mm 55 55 65mm 65 65 75mm 75 Note: Applies to right handed plates only. Prox, Cylinder & Lever 78 3.76
Proximity Furniture Easy to install and operate, Lockwood Proximity Furniture is available in a wide range of stylish levers and finishes to enhance any contemporary building design, bringing a new dimension to commercial security locking solutions. Proximity Mortice Lock Specifications Multivoltage 12-24VDC Field selectable fail safe/fail secure 60mm backset only Monitoring The following monitoring features are standard: Dual key override Deadlatched and locked Door closed Request to exit Proximity Reader Specifications HID 125KHz proximity reader Wiegand data output Supply voltage: 5-12VDC Current requirements (stand by/peak) 25/90mA @ 5VDC, 15/125mA @ 12VDC Beeper activated when presenting proximity card Red/green led indication of reader/lock status For details refer to 5.44 Door Furniture and General Hardware 3.77
4800 Series Narrow Stile Plate Furniture 185 26 11.5 Levers to Suit For detailed information regarding brass levers refer to page 3.100 32 41* 44 45 48* 50* 53* 55A 59 62 70 71 74 78 79 79B 80 83 90 91 94* 97 A slimline, rectangular brass plate that adds style to your choice of lever. Application Designed for use with Lockwood 3570 Series Mortice Latches (4600/4700) and 3580 Series Mortice Latches (4800/4900). Note: certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to page 3.80 for lever/backset suitability on 4800/4900 Series Plates. Features and Specifications Dimensions 185 x 26 x 11.5mm Fixing Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. All lever handles are reversible, except those denoted by*. Door Thickness External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. Refer to lockweb.com.au for information on fixing screw and spindle options for thicker doors. 4800/4900 Plates and Functions (3580 Series) 4800 4801 4802 4803 4805 4807 4808 4809 4820 4822 4823 4900 4901 4904 4905 4906 4907 4908 4909 4917 4918 4920 4922 4600/4700 Plates and Functions (3570 Series) 4600 4601 4602 4603 4805 4807 4608 4809 4620 4622 4623 4700 4701 4704 4905 4706 4907 4708 4909 4717 4718 4720 4722 Plates and Functions Legend Cylinder Hole Fixed Lever Indicating Turnknob Turnknob Disabled Indicating Slotted Turn Slotted Turn LED Lever FIRE RATED * 3570 Series only S3 HIGH SECURITY DURABILITY ANTI-CORROSION * Denotes handed levers Plate numbers marked red indicate no lever option 3.78
5800 Series Narrow Stile Plate Furniture 185 26 11.5 Levers to Suit For detailed information regarding brass levers refer to page 3.100 32 41* 44 45 48* 50* 53* 55A 59 62 70 71 74 78 79 79B 80 83 90 91 94* 97 Functional, yet elegant, the soft lines of this round ended brass plate complement a wide range of levers. Application Designed for use with Lockwood 3570 Series Mortice Latches (5600/5700) and 3580 Series Mortice Latches (5800/5900). Note: certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to page 3.80 for lever/backset suitability on 4800/4900 Series Plates. 5800/5900 Plates and Functions (3580 Series) 5800 5801 5802 5803 5805 5807 5808 5809 5820 5822 5823 5900 5901 5904 5905 5906 5907 5908 5909 5917 5918 5920 5922 Features and Specifications Dimensions 185 x 26 x 11.5mm Fixing Plates are designed to fit back to back. If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. All lever handles are reversible, except those denoted by *. Door Thickness External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. Refer to lockweb.com.au for information on fixing screw and spindle options for thicker doors. FIRE RATED * 3570 Series only S3 HIGH SECURITY DURABILITY ANTI-CORROSION 5600/5700 Plates and Functions (3570 Series) 5600 5601 5602 5603 5805 5807 5608 5809 5620 5622 5623 5700 5701 5704 5905 5706 5907 5708 5909 5717 5718 5720 5722 Plates and Functions Legend Cylinder Hole Turnknob Slotted Turn Fixed Lever Disabled LED * Denotes handed levers Plate numbers marked red indicate no lever option Indicating Turnknob Indicating Slotted Turn Lever Door Furniture and General Hardware 3.79
Lockwood 4800/5800 Series Plate Furniture Backset Suitability Chart Based on 12mm doorstop Lever Number Handed 3580 23mm 4580 25.4mm 5580 30mm 6580 38mm 32 No No No Yes Yes 41 Yes No No Yes Yes 44 No No No No No 45 No No No Yes Yes 48 Yes Yes Yes Yes Yes 50 Yes No No No No 53 Yes No No Yes Yes 55A No No No Yes Yes 59 No No No Yes Yes 62 No No No Yes Yes 70 No Yes Yes Yes Yes 71 No No No Yes Yes 74 No No No Yes Yes 78 No No No Yes Yes 79 No No No No No 79B No No No Yes Yes 80 No No Yes Yes Yes 83 No No No Yes Yes 90 No No No Yes Yes 91 No No No Yes Yes 94 Yes Yes Yes Yes Yes 97 No Yes Yes Yes Yes 3.80
Rose Door Furniture 4800 and 5800 Series Ordering Procedure Ordering Procedure Sample part number 4801/48LCP is made up of several sections. Choose your product by selecting an option from each section. For example: Lockwood 4800/5800, 4600/5600 Series Plate Furniture Plate Type Plate Function Lever/ Knob Finish 48 01 / 48 L CP Plate Type Lever/Knob Type Finish 3570 20 53* 79 Chrome Plate CP Exterior Square End 46 32 55A 79B Satin Chrome Brushed SC Interior Square End 47 40 59 80 Polished Brass PB Exterior Round End 56 41* 62 83 Interior Round End 57 44 70 90 3580 Exterior Square End 48 Interior Square End 49 Exterior Round End 58 45 71 91 48* 74 94* 50 78 97 * Denotes handed levers Interior Round End 59 Plate Function Cylinder Only 00 Cylinder & Lever 01 Right Handed Left Handed NB: Omit if non-handed R L Emergency Turn Only 02 Emergency Turn & Lever 03 Turnknob & Lever 04 Lever Only 05 Turnknob Only 06 Plain Plate 07 Fixed Lever & Cylinder 08 Fixed Lever Only 09 Boomerang Turn & Lever 17 Boomerang Turn Only 18 Cylinder, Lever & LED 20 Lever & LED 22 Cylinder & LED 23 Door Furniture and General Hardware 3.81
200 Series Artefact Square Corner Plates The 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors. Features and Specifications Dimensions 162 x 162 x 3mm aluminium 162 x 162 x 2mm stainless steel and brass Materials Aluminium, brass and stainless steel Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. Note: When using flush pulls back to back the minimum door thickness is 40mm. Finishes Standard Natural Anodised Aluminium Satin Stainless Steel Non Standard Polished Stainless Steel Powdercoat Marine Grade Polished Brass NT SS PS PC MG PB Levers and Knob to Suit 20 88* 96 98 Pull Handle to Suit 75 16 Aluminium Stainless Steel Plates Brass levers and knobs also available on stainless steel and brass plates refer page 3.100 *Aluminium Only 20000NA 20100NA 20002NN 20006NN 20106NN 20010NA 20013NN 20138NN 162 2 3 20007AN 20007CN 20007E N 20007FN 20007NN 20107NN 162 48.7 20001NA 20101NA 20003NN 20004NN 20104NN 20014NN 20020NA 20120NA 28.6 SS/Brass Aluminium 20005NN 20105NN 20022NN 20122NN 20139NN 20024NN/75* 20124NN/75* 20025NA/75* 20125NA/75* 20027NN/75* 20127NN/75* 20028NN/75* 20142NN/75* 20024AN/75* 20024CN/75* 20024EN/75* 20024GN/75* 20031NN 20131NN 20032NA 20132NA 20035NN 20134NN FIRE RATED DURABILITY Legend Cylinder Hole Slotted Button LED S3 HIGH SECURITY ANTI-CORROSION Turn-Snib Disabled Indicating Slotted Button 3.82
202 Series Artefact 10mm Radius Corner Plates The 202 Series Door Furniture is 162mm square with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors. Features and Specifications Dimensions 162 x 162 x 3mm aluminium 162 x 162 x 2mm stainless steel and brass Materials Aluminium, stainless steel and brass. Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. Note: When using flush pulls back to back the minimum door thickness is 40mm. Finishes Standard Natural Anodised Aluminium Stainless Steel Non Standard Polished Stainless Steel Powdercoat Marine Grade Polished Brass NT SS PS PC MG PB Levers and Knob to Suit 20 88* 96 98 Pull Handle to Suit 75 16 Aluminium Stainless Steel Plates Brass levers and knobs also available on stainless steel and brass plates refer page 3.100 *Aluminium Only 20200NA 20300NA 20202NN 20206NN 20306NN 20210NA 20213NN 20338N N 162 2 3 162 48.7 28.6 SS/Brass Aluminium FIRE RATED DURABILITY S3 HIGH SECURITY ANTI-CORROSION 20207AN 20207CN 20207EN 20201NA 20205NN Legend Cylinder Hole Turn-Snib 20301NA 20305NN 20207FN 20203NN 20204NN 20222NN 20322NN Slotted Button Disabled 20207NN 20304NN 20339NN 20307NN 20214NN 20220NA LED 20320NA 20224NN/16* 20324NN/16* 20225NA/16* 20325NA/16* 20227NN/16* 20327NN/16* 20228NN/16* 20342NN/16* 20224AN/ 16* 20224CN/ 16* 20224E N/ 16* 20224GN/ 16* 20231NN 20331NN 20232NA 20332NA 20235NN 20234NN Indicating Slotted Button Door Furniture and General Hardware 3.83
212 Series Artefact Oval Plates The 212 Series Door Furniture is 162mm long x 50mm wide with radius ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Latches. Features and Specifications Dimensions 162 x 50 x 3mm aluminium 162 x 50 x 2mm stainless steel and brass Materials Aluminium, stainless steel or brass. Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. Finishes Standard Natural Anodised Aluminium Stainless Steel Non Standard Polished Stainless Steel Powdercoat Marine Grade Polished Brass NT SS PS PC MG PB Levers and Knob to Suit 20 88* 96 98 Pull Handle to Suit 75 16 Aluminium Stainless Steel Plates Brass levers and knobs also available on stainless steel and brass plates refer page 3.100 *Aluminium Only 50 2 3 162 21200NA 21300NA 21202NN 21206NN 21306NN 21207NN 21307NN 21210NA 21213NN 21338NN SS/Brass Aluminium 21201NA 21301NA 21203NN 21204NN 21304NN 21205NN 21305NN 21214NN 21339NN 21220NA 21320NA 21222NN 21322NN Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button S3 FIRE RATED HIGH SECURITY DURABILITY ANTI-CORROSION 3.84
224 Series Artefact Rectangular Plates The 224 Series Door Furniture is 162mm long x 50mm wide with square ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Latches. Features and Specifications Dimensions 162 x 162 x 2mm stainless steel Materials Stainless Steel only. Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. Standard Finishes Stainless Steel SS 50 2 Levers and Knob to Suit 20 96 98 Brass levers and knobs also available refer page 3.100 162 Pull Handle to Suit Stainless Steel 16 Stainless Steel Plates 22400NA 22500NA 22402NN 22406NN 22506NN 22407NN 22507NN 22410NA 22413NN 22538NN 22401NA 22501NA 22403NN 22404NN 22504NN 22405NN 22505NN 22414NN 22539NN S3 FIRE RATED HIGH SECURITY DURABILITY ANTI-CORROSION 22420NA 22520NA 22422NN 22522NN Legend Cylinder Hole Turn-Snib Slotted Button Disabled LED Indicating Slotted Button Door Furniture and General Hardware 3.85
Artefact Ordering Procedure Ordering Procedure Sample part number 20001NA/96LSS is made up of several sections. Choose your product by selecting an option from each section. For example: 200 Series Plate Type Plate Function Engraving Cylinder Shape Lever/ Knob Finish 200 01 N A / 96 L SS Plate Type Plate Function Engraving Lever/ Knob Type Exterior Plate (162 x 162) Square Corners 200 Interior Plate (162 x 162) Square Corners 201 Exterior Plate (162 x 162) Radius Corners 202 Interior Plate (162 x 162) Radius Corners 203 Exterior Plate (162 x 50) Oval 212 Interior Plate (162 x 50) Oval 213 Exterior Plate (162 x 50) Rectangular 224 Interior Plate (162 x 50) Rectangular 225 Cylinder Only 00 Cylinder & Lever 01 Emergency Turn Only 02 Emergency Turn & Lever 03 Turn Knob & Lever 04 Lever Only 05 Turn Knob Only 06 Plain Plate 07 Cylinder & Fixed Lever 08 Fixed Lever Only 09 Dual Cylinder 10 Privacy Indicator Emergency Turn Only 13 Privacy Indicator Emergency Turn & Lever 14 Privacy Indicator Turn Knob Only 15 Privacy Indicator Turn Knob & Lever 16 Cylinder, Lever & LED 20 Cylinder, Fixed Lever & LED 21 Lever & LED 22 Cylinder & LED 23 Pull Handle Only 24 Pull Handle & Cylinder 25 A G Outlined Infill R X Full Infill Male symbol A R Male text B S Female symbol C T Female text D U Disabled symbol E V Push text F W Pull text G X Unisex symbol H Y No option N Miscellaneous text* P Corporate Engraving** Q * Separate charge per letter ** Separate charge per logo For all in-filled engraving, black gloss is the standard. Cylinder Shape Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders Guarded Oval Cylinder 32mm (H) x 18mm (W) Lockwood 570 Cylinders No Cylinder Function A B N Brass Levers and Knobs 20 53* 79 32 55 79B 40 59 80 41* 62 83 44 70 90 45 71 91 48* 74 94* 50 78 97 Stainless Steel Levers 96 98 Aluminium Levers/Knobs 20 88 96 98 Brass Pull Handles 01 05 Stainless Steel Pull Handles 16 Aluminium Pull Handles 75 * Denotes handed levers Left Handed L Right Handed R Pull Handle & Emergency Turn 26 Finish Pull Handle & Turn Knob 27 Stainless Steel Finishes Pull Handle & Privacy Indicator Emergency Turn 28 Pull Handle & Privacy Indicator Turn Knob 29 Pull Handle & Dual Cylinder 30 Flush Pull Only 31 Flush Pull & Cylinder 32 Flush Pull & Emergency Turn 33 Flush Pull & Turn Knob 34 Flush Pull & Privacy Indicator Emergency Turn 35 Flush Pull & Privacy Indicator Turn Knob 36 Flush Pull & Dual Cylinder 37 Disabled Turn Only 38 Disabled Turn & Lever 39 Pull Handle & Disabled Turn 42 Satin Stainless Steel Polished Stainless Steel Powdercoat Marine Grade Aluminium Finishes Natural Anodised Brass Finishes Polished Brass SS PS PC MG NT PB 3.86
Detention Series Furniture Square Plate Description A heavy duty plate designed for use in hospitals and detention facilities. Styled for institutional use, this plate has six fixing points to ensure that it is well secured to the door. Plates are designed to be free of ligature points. Application Lockwood 3570 Series Mortice Locks and Lockwood 3579 Secure Area Rated Locks. Features and Specifications Anti-ligature Covers fixing holes from existing Artefact 200 Series Furniture Dimensions 162mm x 180mm x 2mm: base plate 161mm x 75mm x 3mm: bevelled top plate All plates are handed except 220D07 and 220D31, which are non-handed when ordered without engraving. Materials Stainless steel Lever and Knob Selection Fixing Six fixing points Standard Knob 21 Webbed Knob 22 Lever 23 220D series plates have concealed fixings 221D series plates have visible fixings Door Thickness 35mm minimum, 45mm maximum For thicker doors, longer screws are required. Note: A minimum door thickness of 50mm is required to fit flush pulls back to back. 3 25 33 61 Standard Finish Satin Stainless Steel S3 FIRE RATED HIGH SECURITY SS DURABILITY ANTI-CORROSION é 60 ù 60 120 35 Door Furniture and General Hardware 3.87
Detention Series Furniture Square Plate Functions 220D00 220D01 220D02 220D03 220D04 220D05 220D06 220D07 220D08 220D09 220D13 220D14 220D15 220D16 220D20 220D21 220D22 220D23 220D24 220D25 220D26 220D27 220D28 220D29 220D31 220D32 220D33 220D34 220D35 220D36 220D56 220D57 220D58 220D59 220D60 220D61 220D62 220D63 220D64 220D65 220D66 220D67 Legend: Cylinder Hole Knob/Lever Fixed Knob/Lever Turn Snib Emergency Turn Privacy Indicator Turn Snib Privacy Indicator Emergency Turn LED Pull Handle Flush Pull Cylinder guards must be ordered separately. Only the plate functions shown above in red are available with engraving. 3.88
Detention Series Furniture Rectangular Plate Description This smaller plate range has been designed for use in detention facilities such as hospitals where domestic aesthetics are preferred over institutional type styling. Plates are designed to be free of ligature points. Application Lockwood 3570 Series Mortice Locks and Lockwood 3579 Secure Area Rated Locks. Features and Specifications Anti-ligature Covers fixing holes from existing 212 Series Artefact Plates Dimensions 162mm x 76mm x 2mm: base plate 161mm x 75mm x 3mm: bevelled top plate Only plates with levers and/or turn knobs are handed. Materials Stainless steel Fixing Four fixing points 222D series plates have concealed fixings 223D series plates have visible fixings Door Thickness 35mm minimum, 45mm maximum For thicker doors, longer screws are required. Lever and Knob Selection Standard Knob 21 Webbed Knob 22 Lever 23 25 3 33 Standard Finishes Satin Stainless Steel SS é 60 ù 60 35 61 120 S3 FIRE RATED HIGH SECURITY DURABILITY ANTI-CORROSION Door Furniture and General Hardware 3.89
Detention Series Furniture Rectangular Plate Functions 222D00 222D01 222D02 222D03 222D04 222D05 222D06 222D07 222D08 222D09 222D13 222D14 222D15 222D16 222D20 222D21 222D22 222D23 222D24 Legend: Cylinder Hole Knob/Lever Fixed Knob/Lever Turn Snib Emergency Turn Privacy Indicator Turn Snib Privacy Indicator Emergency Turn LED Pull Handle Flush Pull Note: Only plates with levers and/or turn knobs are handed. 223D Series have visible fixings. 3.90
Detention Series Furniture Accessories Knobs and Lever Standard Knob 21 Simple yet functional, this knob has soft edges to minimise impact injuries and anti-ligature features that make it suitable for use in detention facilities. 3 25 é 60 Webbed Knob 22 33 The webbed knob combines pleasing aesthetics, comfortable grip and anti-ligature features to provide a solution for any environment. ù 60 Detention Lever 23 Ergonomically designed to maximise grip, the detention lever is suitable for use in hospitals and minimum security applications. It caters especially for the elderly or people with arthritic conditions. 35 61 Turns Emergency Turn 3 Turn Knob 120 42 42 Indicating Emergency Turn 42 3 Indicating Turn Knob 42 Door Furniture and General Hardware 3.91
Detention Series Furniture Accessories Pulls Flush Pull The detention flush pull has been designed to maximise grip and eliminate the possibility of hiding objects in the cavity. 121 35 Standard Pull The detention pull allows for a firm grip and can be used to open heavy doors. Also designed to be free of hanging points. 40 R10 161 30 Cylinder Guards Description Cylinder guards must be fitted with any cylinder plate function. Guards are available to suit different door thicknesses. Part Number 220D00/40SS 220D00/45SS 220D00/50SS 220D00/55SS 220D00/60SS Door Thickness Suitability Suit doors 35-40mm Suit doors 40-45mm Suit doors 45-50mm Suit doors 50-55mm Suit doors 55-60mm Fixing Screws Torx anti-tamper, snake-eye and standard screws are available in accessory packs to suit different door thicknesses. Only standard screws to suit doors 35mm 45mm thick are supplied with furniture. Other variations need to be ordered separately using part numbers specified. All accessory packs contain six screws. Part Number Description Door Thickness Suitability 220D11/45 Torx Anti-tamper Screws 35-45mm 220D11/55 Torx Anti-tamper Screws 45-55mm 220D11/65 Torx Anti-tamper Screws 55-65mm 220D12/45 Standard Screws 35-45mm 220D12/55 Standard Screws 45-55mm 220D12/65 Standard Screws 55-65mm 220D13/50 Snake-eye Screws 35-50mm 3.92
Detention Series Furniture Ordering Procedure Ordering Procedure Sample part number 220D01NA/21LSS is made up of several sections. Choose your product by selecting an option from each section. For example: Plate Function Engraving Options Cylinder Options Lever/ Knob Finish 220 D 01 N A / 21 L SS Plate Concealed Fix 162mm x 180mm 220 Visible Fix 162mm x 180mm 221 Concealed Fix 162mm x 76mm 222 Visible Fix 162mm x 76mm 223 Function Cylinder Only 00 Cylinder and Lever/Knob 01 Emergency Turn Only 02 Emergency Turn and Lever 03 Turn Snib and Lever/Knob 04 Lever/Knob Only 05 Turn Snib Only 06 Plain Plate 07 Cylinder and Fixed Lever/Knob 08 Fixed Lever/Knob Only 09 Privacy Indicator Emergency Turn Only 13 Privacy Indicator Emergency Turn and Lever/Knob 14 Privacy Indicator Turn Snib Only 15 Privacy Indicator Turn Snib and Lever/Knob 16 Cylinder, Lever/Knob and LED 20 Cylinder, Fixed Lever/Knob and LED 21 Lever/Knob and LED 22 Cylinder and LED 23 Pull Handle Only 24 Pull Handle and Cylinder 25 Pull Handle and Emergency Turn 26 Pull Handle and Turn Snib 27 Pull Handle and Privacy Indicator Emergency Turn 28 Pull Handle and Privacy Indicator Turn Snib 29 Flush Pull Only 31 Flush Pull and Cylinder 32 Flush Pull and Emergency Turn 33 Flush Pull and Turn Snib 34 Flush Pull and Privacy Indicator Emergency Turn 35 Flush Pull and Privacy Indicator Turn Snib 36 Pull Handle and Knob/Lever 56 Pull Handle, Cylinder and Knob/Lever 57 Pull Handle, Emergency Turn and Knob/Lever 58 Pull Handle, Turn Snib and Knob/Lever 59 Pull Handle, Privacy Indicator Emergency Turn and Knob/Lever 60 Pull Handle, Privacy Indicator Turn Snib and Knob/Lever 61 Flush Pull and Lever/Knob 62 Flush Pull and Cylinder and Lever/Knob 63 Flush Pull and Emergency Turn and Lever/Knob 64 Flush Pull and Turn Snib and Lever/Knob 65 Flush Pull and Privacy Indicator Emergency Turn and Lever/Knob 66 Flush Pull and Privacy Indicator Turn Snib and Knob/Lever 67 Engraving Options Male Symbol A R Male Text B S Female Symbol C T Female Text D U Disabled Symbol E V Push Text F W Pull Text G X Unisex Symbol H Y No Option N Miscellaneous Text* P Corporate Engraving** Q *Separate charge per letter **Separate charge per logo For all in-filled engraving, black gloss is the standard. A-G Outlined Infill R-X Full Infill Cylinder Options Australian Oval No Cylinder A N Lever/Knob Standard Knob 21 Webbed Knob 22 Lever 23 Left Handed L Right Handed R Finish Satin Stainless Steel SS Note: Cylinder guards must be ordered with all cylinder function plates. All turn snib functions are supplied with tailbars and clutching mechanisms as standard. For no tailbar and clutching insert N after function number e.g. 220D06NNNLSS Door Furniture and General Hardware 3.93
Palladium Series Overview The exceptional range of Palladium Door Furniture offers builders, specifiers and interior designers an array of levers that can be used in any residential environment. The Palladium Series of door furniture reflects the best in quality, blended with sophisticated designs. The Palladium Series was produced to meet the rigorous aesthetic requirements of residential markets, while conforming to the ever increasing need for quality semi-commercial building segments. Available in Palladium and Palladium Xtra versions to suit a wide range of applications. Summit L1 Spire L2 Element L3 Glide L4 Aria #27 Hakea #28 Acacia #29 Saltbush #34 Mulga #36 Gidgee #37 3.94
Palladium Series Door Furniture The Palladium Series represents the highest standard in residential and semi-commercial door hardware and is brought to you through modern innovative designs, combined with quality manufacturing. A wide range of lever options is available to enable a common style throughout the home. Features and Specifications Dimensions 222 x 31 x 9mm Easy, field selectable handing. Materials All plates and levers in the Palladium Series are constructed from solid zinc die-cast. Fixing Lockwood Palladium Series Door Furniture is a complete set, supplied with both the internal and external plates. Plates are designed to fit back to back to be fully concealed externally. Door Thickness Minimum 32mm maximum 45mm door thickness. Keying Use with Euro profile cylinder. Finishes Satin Chrome Pearl Chrome Plate Gold Plate White Black Primrose Magnolia Polyester Powdercoat 31 222 SP CP GLD WH BLK PRM MAG PPC 45mm Plates and Functions For use with Defender Mortice Locks. 48.5 85 PL2/48/## 85mm Plates and Functions For use with Optimum Mortice Locks. PL2/85/## Note: The internal single cylinder configuration is also used in the Palladium French Door kits (PLFD/85/##) only in this configuration the external lever is fixed. No Pitch Plates For use with passage functions. PL1/00/## ## Represents lever style number. PL3/48/## PL3/85/## PL5/00/## PL4/48/## PL4/85/## Door Furniture and General Hardware 3.95
Palladium Xtra Furniture The Palladium Xtra Series is designed specifically for the Optimum range of mortice locks to increase functionality enabling both internal snibbing for safety mode and lock status indication. Palladium Xtra is suitable for use in residential buildings, apartments and semi-commercial applications. Features and Specifications Dimensions 222 x 31 x 9mm Easy, field selectable handing. Materials All plates and levers in the Palladium Series are constructed from solid zinc die-cast. Fixing Lockwood Palladium Xtra door furniture is a complete set, supplied with both the internal and external plates. Plates are designed to fit back to back to be fully concealed externally. Door Thickness Minimum 32mm maximum 45mm door thickness. Keying Use with Euro profile cylinder. Finishes Satin Chrome Pearl Black SP BLK 85mm Plates and Functions PL4/85/## ## Represents lever style number. 31 222 3.96
Palladium Series Door Furniture Summit L1 Hakea #28 30 32-45 61 61 30 32-45 66 66 222 222 113 110 Spire L2 Acacia #29 30 32-45 61 61 30 32-45 60 60 222 222 115 111 Element L3 Saltbush #34 30 32-45 58 58 30 32-45 68 68 222 222 Glide L4 110 Mulga #36 109 30 32-45 60 60 30 32-45 67 67 Aria #27 30 32-45 52 52 109 222 222 Gidgee #37 30 32-45 57 57 113 222 222 Door Furniture and General Hardware 112 113 3.97
Palladium Series Ordering Procedure Ordering Procedure Sample part number PL4/85/34SC is made up of several sections. Choose your product by selecting an option from each section. For example: Palladium Platform Name Function Pitch Lever Finish PL 4 / 85 / 34 SP Platform Name Pitch Finish Palladium PL Lever Only 00 Chrome Plate CP Function Passage Set 1 External Single Cylinder 2 Internal Single Cylinder 3 Double Cylinder 4 Fixed Dummy 5 French Door FD 48.5mm Pitch 48 85mm Pitch 85 Lever Summit L1 Spire L2 Element L3 Glide L4 Gold Plate Satin Chrome Pearl White Black Primrose Magnolia Other Powdercoat GLD SP WH BLK PRM MAG PPC Aria 27 Hakea 28 Acacia 29 Saltbush 34 Mulga 36 Gidgee 37 Palladium Xtra Platform Name Function Pitch Lever Finish PX 4 / 85 / 34 SP Platform Name Pitch Finish Palladium Xtra PX 85mm Pitch 85 Satin Chrome Pearl SP Function Lever Black BLK Double Cylinder 4 Aria 27 3.98 For product availability please refer to the current pricelist, contact customer service or your local sales office.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and after-sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America. As the world s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company in the market. Australia 1300 LOCK UP (1300 562 587) lockweb.com.au New Zealand +64 9415 7111 assaabloy.co.nz ASSA ABLOY Australia Pty Ltd 235 Huntingdale Road Oakleigh, Victoria, 3166 Australia info.au@assaabloy.com assaabloy.com.au ASSA ABLOY New Zealand Ltd 6 Armstrong Road Albany, North Shore City, 0632 New Zealand info.nz@assaabloy.com assaabloy.co.nz ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 2010