[1] Submitted by Ana White [2] on Wed, 2013-10-02 12:37 Page 1 of 14
Page 2 of 14
[1] Additional Photos [3] [4] Hi everyone! I'm so excited today to share with you brand new plans! Remember a little while back when I teamed up with Shanty2Chic [5]to get you plans for this truss table? [6] Page 3 of 14
Page 4 of 14
And we promised you bench plans were coming soon? Well, we are very happy to come through on that promise to you today!!! Page 5 of 14
Page 6 of 14
Whitney from Shanty2Chic [7] and I teamed up again so you too can build matching benches for your table! Here's from Whitney [7]: I am LOVING my new benches! I love the simplicity of them and how the design compliments the table so well. The 4x4's give it a really solid look and my whole family can eat at this table at the same time. The best part Under $80 in wood for both. Can't beat that! For more building details and finishing instruction, please stop over and check out Whitney's post over at Shanty2Chic [7]- see you back here for plans following! XO Ana Summary: Free plans to build a beam bench from ana-white.com CategoriesProject Type: Bench [8] Room: dining room [9] entry way [10] Outdoor [11] Page 7 of 14
Skill Level: Intermediate [12] Style: Farmhouse Style Furniture Plans [13] Estimated Cost: $50 - $100 [14] Dimensions: Dimensions shown above Dimensions: 2-4x4 @ 8 feet long 2-2x4 @ 6 feet long (or a 12 footer) 2-2x8 @ 6 feet long (or a 12 footer) 1-2x10 @ 3 feet long (for the breadboard ends - you can also use 2x8 scraps here instead of buying a 2x10) 2 1/2" pocket hole screws Tools: Page 8 of 14
[15] [16] [17] Cut List: 2-4x4 @ 13 1/2" 4-4x4 @ 13 1/4" (long point to long point, both ends cut at 10 degrees off square, parallel) Page 9 of 14
2-4x4 @ 8" (long point to long point, both ends cut at 10 degrees off square NOT parallel) 1-4x4 @ 65" 2-2x4 @ 65" 2-2x8 @ 68 1/2" 2-2x10 @ 14 1/2" General Instructions: Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck! Step 1 [18] Build two of the leg ends as shown above. There's a ton of different ways to join 4x4s - I really like how Whitney used a Kreg Jig to hide the Page 10 of 14
joints underneath - check that out here. [7] Step 2 [19] Then attach the bottom stretcher to the two legs... Step 3 Page 11 of 14
[20] Next, add the two side aprons - these will give structure to the seat and look like 4x4s from the outside. TIP: Drill 1 1/2" pocket holes facing upward on the inside of the aprons before attaching for attaching the bench top in the next step. Step 4 Page 12 of 14
[21] Finally, build your bench top first (I recommend building with 1 1/2" pocket holes and 2 1/2" pocket hole screws first) and then attach to the bench. Finishing InstructionsPreparation Instructions: Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed. Source URL: http://www.ana-white.com/2013/10/plans/4x4-truss-benches Links [1] http://www.ana-white.com/2013/10/plans/4x4-truss-benches [2] http://www.ana-white.com/users/ana-white Page 13 of 14
[3] http://www.ana-white.com/sites/default/files/3154835280_13807354 35.jpg [4] http://www.ana-white.com/sites/default/files/3154835279_13807354 35.jpg [5] http://www.shanty-2-chic.com/2013/09/diy-dining-table.html [6] http://ana-white.com/2013/09/plans/4x4-truss-beam-table [7] http://www.shanty-2-chic.com/2013/10/diy-bench-2.html [8] http://www.ana-white.com/category/plans/project-type/bench [9] http://www.ana-white.com/category/plans/room/dining-room [10] http://www.ana-white.com/category/plans/room/entry-way [11] http://www.ana-white.com/category/plans/room/outdoor [12] http://www.ana-white.com/category/plans/skill-level/intermediate [13] http://www.ana-white.com/category/plans/style/farmhouse [14] http://www.ana-white.com/category/plans/estimated-cost/50-100 [15] https://www.ryobitools.com/power-tools/products/details/537 [16] https://www.ryobitools.com/power-tools/products/details/636 [17] https://www.ryobitools.com/power-tools/products/details/187 [18] http://www.ana-white.com/sites/default/files/3154835277_1380735 435.jpg [19] http://www.ana-white.com/sites/default/files/3154835274_1380735 435.jpg [20] http://www.ana-white.com/sites/default/files/3154835275_1380735 435.jpg [21] http://www.ana-white.com/sites/default/files/3154835276_1380735 435.jpg Page 14 of 14