DIGITAL ECHO AV AMPLIFIER. DAX-1000(SElII OPERATING INSTRUCTIONS BMB,...--FR ---, ;,, \ /D-~"'\ /0-"-\ b " # \0 '..' i i' ; i ; 000 '..' '.~' 80 7,5K -12 '1~ KEY CONTROL L " BALANCE FREQ. GAIN POWER I BMB ~ DAXSERIES EIGH:POWEB.:BMB XAllAOKE AV I\MPfll!lHR MIC INPUT o 0 1 2 Thank you for purchasing our product. In order to enable you to use the product correctly, please read the operating instructions carefully before using the product.... - - - - - - TABLE OF CONTENTS - - - - - - - -. - i., Safety marks 2 Setup of motor volume output adjustment switch 13 Characteristics 3 Basic operation 14, Precautions for installation 4 Detailed operating method 15 Safety precautions Name and functio description on the front panel Name and functio description on the rear panel Connection diagram of external equiprnents Precautions for connection 12 5 6 8 Operating method 16 of remote controller Troubleshooting 17 Others 18... 11 Specifications 19 II._-_.. ~.. _----_.. ----_... _---_.. ----"------""-------------".. ------------~ 1
SAFETY MARKS In order to enable the user to use the product correctly and conveniently and prevent any body injury and property loss in using, please read the following precautions carefully before using the product. The safety marks are defined as follows: Please read the following precautions carefully. WARNING It might cause serious body injury and even death accident if it's used in breach of the instructions. ATTENTION It might cause serious body injury or product damage if it's used in breach of the mark instructions. e The sign at the left means the content of the noxious and hazardous substance is lower than the limit of SJ/T 11363-2(j)06 I" corruga:~ed I\~" " BAG FOR I " BAG FOR I C~ board C~ ~~~~~~L C~ MACHINE I C~ PARTS ' ~KING BOX Clapboard PS I HDPE L LDPE -T------' 1- ---------------+--1~ 2
CHARACTERISTICS Major characteristics of this KARAOKE AV AMPLIFIER are as follows. Powerful Output Force of Amplifier The master amplifier comprising the big power transistors features excellent maximum output power and I.M.D to get ideal recovery effect and provide the perfect hearing effect. Application of STEREO ECHO The function of stereo echo makes the user feels he/she is at the site and the better accompaniment effect will be produced. Built-in Feedback Reducer The built-in feedback reducer could ettectively solve the problem of microphone howling in various environments and prevent howling. Perfect Built-in Protective Circuit When the overload current in the amplifier is too big or too hot and the unit of loudspeaker has short circuit, the built-in protective circuit shall be activated automatically to effectively protect the device and loudspeaker. Sound Quality Improvement Design In order to recover the sound source signal cerfectly, by improving the noise ratio of signal band to shorten the transfer distance of signal, decrease the intermodulation distortion of left/right track and reduce the interruption of signals as well as reduce the effect of power to the signal source to further improve the output sound quality. Convenient Volume Adjustment Function It could adjust the volume of microhpone independently and adjust the master volume and the tracks of loudspeaker respectively. Auto Input Sound Source Selection It could detect the external equipment automatically and select the sound source of input automatically. 3
PRECAUTIONS FOR INSTALLATION Do not install the product at the following places: - Bad ventilation or airtight environments - Near the heating equipments or under the direct rays of the sun. - Unstable fields - Damp or dusty fields. Right installation The product will produce some heat in working, so it should be installed at the place where has good ventilation. Please keep the upper side of device 10cm or more away from the wall, and Scm or more for the two sides; 10cm or more for the rear side. IS-l0cm I U ~ ~~~~ij~ ~~~ ~~ ~~ ~~~~~~~~~ ~~~~ij~~~~~~~~ ~~m ~~~~~~~~~~~~ ~~~~~~~m~~~~ii~uiiiiiw~~~iii@iii~~iwmlllll~iiii~iii!~iwiiiwiiiw l~w,,~r ~ ~~mlll~ulllllm~~~~ii~ I1I1 ~11[i~ [IIWlllmu~lliIIW[I~ullll~~llllllullll~ IIII ~ @ n Before connecting Precautions When connecting, please pull off the power cable from the power socket and then reconnect, the names of terminals could be different with the device. At that moment, please refer to the instructions to connect correctly. It should use these loudspeakers that impedance is higher than 6Q. If it's connected wrongly, it might damage the device and produce noise. After being installed, if the connection cable is mixed with other cables, or it's too close to other electric products, noise might be produced. The product has two power output ways including coupled power output and uncoupled power output; please select the right terminal in using. Output power of AC output terminal The output power of used audio equipment couldn't be exceed the maximum output power. The power output terminal (AC outlet) could be used for the connection of audio equipment only. Do not use together with other electronic products (such as electric heater and other electric products whose powers are over than the nominal power). 4
SAFETY PRECAUTIONS Do use the rated AC power Do not let any external object or water get into the amplifier. -The product should use 230V/50Hz power. * If the voltage is over high, it might cause fire or electric shock and other accidents. Do not connect the AC power to the amplifier in the touowinscondltlons: = 000 If the external object or water gets into the amplifier, it might cause fire, electric shock or other accidents. In that case. please turn off the power immediately and pull off the power plug and contact our service center as soon as possible. --------_.._._._-- Do not damage the power cable. -When connecting instruments to the amplifier. -When it's not used for a long time. -When cleaning the product or making maintenance. *It might cause fire, electric shock or other accidents. Do not dismantle or rebuild the housing by yourself. -Do not bend or pull the cable by force. -Do not place heavy object on the cable. -Do not change the cable by yourself. -Do not fix the cable by bolts. -Do not place the cable near the warming stove or air heater or other heating ecuiprnents. *If the cable is damaged, it might cause fire, electric shock or other accidents, please contact our agent or service center quickly. * It might cause fire, electric shock or other accidents. If it's needed to repair or check, please contact our agent or service center. If the device gives off strange smell, smoke or abnormal sound. Do not connect these equlprnents that use the bigger output power. -.!' ~. I ~~ * It might cause fire. electric shock or other accidents. It might cause fire. electric shock or other accidents, at this moment, please turn off the power immediately and pull off the power plug, and contact our agent or service center quickly. 5
NAME AND FUNCTION DESCRIPTION ON FRONT PANEL = D~ DIGITAL ECHO 4CH ~ CD @GM) ~ @ @ -IAMPLIFIEF MUSIC I ll ~I~ {[~} \ I - - - - - - -- - ~ # 0 \ i \ ~ 'f)' i \ ; t1 to 40 4D 1,,, r--f'r-.,, \ ~o,,~ POWER l4~ - - - 10 -c.-. -e." I 7.51< -u".-.il BALANCE FREQ. GAIN BALANCE BGM MUSiCTONE Sl~~~O - - - ~~I~~ ~lol@: 1 1 ~4 'I~ -10 +\! -I' +'1..,~ -:,,, _ I" 1'. SP1 2 BASS MID TREBLE 0"'.. REPT BJ ~. ~ ~"= r FU' ;T10N ] -KEY DNTRD ~I ~ ~~ ~ :Hn KEY CONTROL rulllj[ij]~ihj III MICI~L ECHO VL "'-,I \ l r2 1 '0 10~ ~o,,~ lg'~ \, ECHJl;OI Mit TONE Mit VOL ECHO MIC INPUT ~I~... i~:~i@:~~ 0 0 0 1'0..;~. {,. -I~ -:i. -1'0' -;;,... 1'.... ~ 0" fo ",a_.. 1, DELAY BASS MID TREBLE 1/A 2/B 3------J '\ i 0 3 F= H ( \ \ @@@@@@@@@@@@@@@ @ 1. Music volume adjustor It's used to adjust the accompanying audio device and DVD sound source signal. 2. Remote sensor It's used to receive the signal of remote controller. 3. Input selection The sequence of auto input mode is described as follows: BGM - KARAOKE - DVD It first enable BGM mode when turn on rear function switch. KARAOKE or DVD mode is selected after multiple seconds if detects external input signal from real terminal. If main power switch is on when rear function switch is off. KARAOKE mode is selected automatically. 4. Balance adjustor It's used to adjust the volume of left/right track. The volumes of left and right tracks are the same when the pin is at the middle position. 5. FR frequency adjustor (FREQJ It's same with the volume adjustment of FR GAIN. it's used in case that there is echo in using microphone.(reter to page 15) 6. FR gain adjustor Refer to page 15. 7. Indicator The LED indicator shall blink when adjusting the defaulted sound effect. 8. Tone falling key Press the key once to make tone ( D) falling one by one. 9. Reset key When rising tone (#) or falling tone ( D), press the reset key to return to the defaulted tone. 10. Tone rising key Press the key once to make tone (#) rising one by one. 11. Reverberation adjustor It's used to adjust the volume of reverberation. It could the sound effect of reverberation. 12. MIC master adjustor It's used to adjust the overall volume of microphone. 6
NAME AND FUNCTION DESCRIPTION ON FRONT PANEL 13. Balance adjustor of loudspeaker 21. Bass adjustor It's used to adjust the volume of front! It's used to adjust the bass effects of rear loudspeaker. microphones that are connected with The volumes of front and rear loudspeakers the terminals. are same when the pin is at the middle It could be adjusted in the range of position. -10-+10dB. 14. BGM adjustor 22. Mediant adjustor If tile external device or the accompanying It's used to adjust the mediant effects of audio device is used, and if there is blank microphones that are connected with the part after the track is over, it could adjust terminals. the volume of background music. It could be adjusted in the range of -10-+10dB. 15. Bass adjustor It's used to adjust the accompanying audio 23. Treble adjustor device and the bass volume in playing DVD. It's used to adjust the treble effects of It could be adjusted in the range of microphones that are connected with the -10-+10dS. terminals. 16. Mediant adjustor It could be adjusted in the range of -10-+10dB. It's used to adjust the accompanying audio device and the bass volume in playing DVD. 24. Microphone 1/A adjustor It could be adjusted in the range of It's used to adjust the output volume of -10-+10dS. front microphone 1 and the rear MIC A. 17. Treble adjustor 25. Microphone 2/B adjustor It's used to adjust the accompanying audio It's used to adjust the output volume of device and the treble volume in playing DVD. front microphone 2 and the rear MIC S. It could be adjusted in the range of -10-+10dB. 26. Microphone 3 adjustor In general conditions, it could adjust the It's used to adjust the output volume bass, mediant and treble through the of front microphone 3. standard level (0). If it adjusts too much, it might damage the 27. Echo reverberation on/off switch loudspeaker and produce echo. It could set up the reverberation effect of microphone 3. 18. Echo reverberation selection switch After turning on the reverberation, it It's used to select the monophony/stereo could add the reverberation effect in the echo. sound effect of microphone: When the user selects the monophony, the and when turning off the reverberation, reverberation effect shall be at the middle it could output the microphone sound part of left and right loudspeakers. only and turn off all reverberation effects. When the stereo is selected, the sound of microphone shall be spread on the left/right 28. 29. 30. Microphone input terminals track. The terminals connecting with microphones. 19. Echo reverberation repeat times 31. Power switch adjustor Press the power switch to turn on the It's used to adjust the repeat times of power and further press to turn off the reverberation effect. power. 20. Echo reverberation delay adjustor It's used to adjust the continuation of echo reverberation. 7
NAME AND FUNCTION DESCRIPTION ON THE REAR PANEL I! I I I KARAOKE two I 11.. I... OUT l~= lilf!ti~lj;r~i:;'t'-"-~-'--jo-_ ----- @@ @'I@ @ @@@ @@ @ 1. Microphone A input terminal It's used to connect the terminal of microphone. It's mainly used in case that it's difficult to connect the front panel. 2. Microphone B input terminal It's used to connect the terminal of microphone. It's mainly used in case that it's difficult to connect the front panel. 3. Video input terminal It's used to connect the terminal of accompanying audio device or DVD video output device. 4. Video output terminal It's used to output the video of accompanying audio device or DVD to the terminal of display. 7. Auto input selection on/off This switch automatically enables or disables! a function mode selected according to sound source signal detected from equipped exterrja instruments of rear panel, KARAOKE rnode is fixed automatically when function switch is oft The system selects a mode according to the i sequence of sound source signal from equipped external instruments of rear panel. And switches a mode to 8GM if no signal. 8. External wired adjusting terminal If the device is installed at these places where the remote controller is not available; you can control and operate the device by connecting the external wired adjusting terminal with the IR input terminal. 9. Output terminal of subwoofer In order to enhance the effect of bass, you can connect a active subwoofer which has the extrav power amplifier or built-in amplifier via the output terminal. 5. KARAOKE audio/video signal selection Select audio and video signal of KARAOKE player. 6. DVD audio/video signal selection Select an audio and video signal of DVD. Output terminal Active sub woofer 8
NAME AND FUNCTION DESCRIPTION ON THE REAR mnel G) @ 0 00 -- --1 I-I-I-j-I ' ':~i~ i -- =,=-:~:.~- ~ ~ ~ ~LI KARAOKE OVO FU'CTIO, EI7 _EI7 D C ~~I} ~ ~ ~ @ @ VID O OUT AlIIllO.,,0 0 AUDIO VIMO O~ OFF IN IN IN IN DUT l L L L l L lwil ~~ l'i:'j ~~~~ ILF+T~~~~TrT-- - -- @@ t~ L6t~@ @@ @..._--------- ---~._------------_/ AC net/230v50hz SWI CtiED ~ ~'1~ow ~ >-:~ UNSWITCHEO ~ MAX100W '\: ::/ At 2JI1V-/5(lHz!IJ ~ I {a r~',-~ @@ 10 KARAOKE input level adjustor When the KARAOKE input signal level is too big or too small, it could adjust through KARAOKE input level adjustor. 11. KARAOKE sensitivity switch Set the sensitivity at which KARAOKE audio input level is detected and switched automatically. 12. KARAOKE input terminal It's used to connect the output terminal of accompanying audio device (KARAOKE device). 13. DVD input terminal It's used to connect the output terminal of DVD. 14. DVD input level adjustor When the DVD input signal level is too big or too small, it could adjust through DVD input level adjustor. 15. DVD sensitivity switch Set the sensitivity at which DVD audio input level is detected and switched automatically. 16. BGM mono/stereo select switch Select the BGM signal input mode between mono and stereo through the switch. 17. BGM input terminal It's used to connect the output terminal of BGM (back ground music) device. 18. Effector input terminal In order to enhance the music effect of accompanying audio device or DVD, it's used to connect the input terminal of sound effect adjustor. 19. Effector ouout terminal In order to enhance the music effect of accompanying audio device or DVD, it's used to connect the input terminal of sound effect adjustor. 20. Pre-output terminal In order to enhance the output of loudspeaker, when using the external amplifier, it's to connect the pre-output terminal on the main device and input terminal of the external amplifier. 9
NAME AND FUNCTION DESCRIPTION ON THE REAR PANEL CD 00 0 --==-t-- -j -- ---!.!.I!- video IN.' ~U ~~I: l=-l;~j KARAOKE DVD FUNCTiON EB @ 0 ~J~~.",'", ~ VIDEO OUT,".,,~".ro ~.~"."..512~ -----I-----~... ~~_ ~_ -._-_ - _.._- -_.. ~--~-- _---_. AC UTLET I 230V50Hz UNSWITCHED ~ MAX1110W ~ ~. i ~ ':-~bll ~_ FUSE25~'~ -l @@ @ @ @ @@@ @ @@ @ @ @@ *Note: When it's needed to connect the external amplifier, please turn off the power and external amplltler first and confirm whether the volume adjustor is at the smallest status, and then connect. Too big output level might damage the product and the loudspeaker. 21. Loudspeaker terminal 2 It's used to connect the terminal of loudspeaker 2. Please refer to page 9 for the connection. 22. Loudspeaker terminal 1 It's used to connect the terminal of loudspeaker 1. Please refer to page 9 for the connection. 23. Power output terminal (uncoupled switch) When turn on/off the power, the power is always in output state. The max. rated power of the output terminal is 100W. Do not use the bigger rate devices. 24. Power output terminal (coupled switch) When turn on/off the power, the power shall be turned on/off. The max. rated power of the output terminal is 200W. Do not use the bigger rate devices. 25. Grounding terminal It's used to connect the external device. The terminal is used to prevent the noise and electric shock when using the microphone. Do make grounding protection in using. If the place is wet or it's not good for grounding connection, it might cause fault, electric shock, fire or other accidents. 10 26. Fuse Open the fuse cover, you will see the fuse. Please use the same specification product when replacing the 'fuse. 27. AC input The product uses 230V/50Hz AC voltage, please insert the power cable into the socket after connecting the terminal. * Precautions Please use the attached power cable when connecting. It might cause fire or damage if other kinds of cables are used.
CONNECTION DIAGRAM OF EXTERNAL DEVICE Monitor [--.. _- ~--1 -~~l \F- -----l! Its)I Wireless microphone Monitor Iii / = II J I 11111111 [:.:J 11111111 IIT I Wireless microphone LL._Jlo-,!"', I 'I _ Monitor I I Active sub woofer 1[-=-1 Ii. 2!IIIIIIIIIOUlIIIIIJ I ~--:~---=- I~~j ~~1II11 0 111111111 [t External sensor,... '- MICIN VID OIM UTOSE CT EX R KA KE D SE~ OR S B WO FER EfJ ~ ~ RAOK.E DVD FUNCTION ~ A ~rtt 9!@ Right Left (I At OUTLET /230V 50Hz SWITCHED ~ ~'l.laiodw ~ OQ~- ~ ~ ~ UH$WITCHED ~ V1DE OUT. AU ;/IOEfJ l\jolll eu Q. MI' MAX1QOW ~ At 230Vw/SllHz IQI FUSE25 jt6.3a, \ 1 I 1\ " ~ L-.J ; d~ I; ~,,--~===. -, I Accompanvms ~~_... audio device - '-- - Ul) I~ \!& 11 (QLI. Power cable V ~I----I-----------jl- L.~-----~~... --------. B8M device r..._-------- Song accompanying audio device Left Equalizer I Left 11
CONNECTION When connecting the loudspeaker cable When connecting the loudspeaker connector, please confirm the right polarities (+ and -) and the right track, do not connect reversely. Please pay attention to the connection of loudspeaker and avoid touching with other terminals or the rear panel. In addition, do connect the cable according to the correct polarities and avoid the touch of naked loudspeaker cables. \~-- --'~o:=~ ljjm'!'~ About the impedance of loudspeaker 1;f(O)~ LC~u Right SYSTEMS 1 Left If a loudspeaker that has lower impedance than the rated impedance (6-8 ohms), for example 4 ohms loudspeaker, is used for a long time, the built-in protective circuit may be activated automatically. After the protective circuit is activated, pull off the cable and keep a good ventilation to reduce the temperature and then reconnect the power. When connecting the signal cable When connecting the signal cable, after pulling off the power cable, please confirm the left track (L: white) and right track (R: red) and then connect them. The names of the terminals could be different with the device. Please read and refer to the operating instructions to ensure correct connection. If the signals of left track and right track are connected reversely, the stereo effect shall be reduced. 12 1 _
SETUP OF MOTOR VOLUME OUTPUT ADJUSTMENT The user may set up the max. output levels of the master volume of music and microphone, it may effectively protect the loudspeaker and the amplifying circuit. The method of setting up the max. output level is described as follows: 1. Remove the knob of the master volume of music and microphone. * Precautions for removing the knob Because the knob and the LED is connected by the cable, so you should pull it out carefully. 2. Remove the bolts first and then fix them on the corresponding positions again. If the bolts are too tight, it might cause bad effect. Please keep the consistence height with the original position or confirm whether the knob is fixed firmly. 3. Please use the same specification bolts. Improper bolts might cause disconnection and it's easy to fall into the machine and which would damage the knob hole. 4. Adjust the knob clockwise to decrease the level. Fixing position when leaving the factory POWER I BMB ~ BMB 10 9 0 (} Screw a 0.z 0 1\ n 0 2. Ii 5~~ 3 f Max. value of master volume Position Volume of boll level 10 10 9 9 8 8 7 7 6 8 5 5 4 _.~-- 3 3 2 2 DOOR OPEN/CLOSS 1. Press A part to open the door; and reverse operation to close the door. 2. The adjustors of microphone, music, reverberation effect BGM and loudspeaker are equipped at the inner side of door. 3. In order to facilitate to operate at the dark place, the light shall be turned on automatically when opening the door and turned off when closing the door. 4. After operating the adjustors inside the door, please close the door. * Note If too big force is made at B direction, it might damage the structure, do operate properry. 13
BASIC OPERATION 1. Press the power button 1on the panel and you will hear tile sound produced by the relay in 2-3 seconds. 2. Use the volume adjustor 2 to adjust tile volume. And use the timbre adjustor 3 to adjust the timbre. 3. Insert the microphone into the position 4. 4. Adjust adjustor 5 to the middle position. 5. Adjust the volume of microphone through the adjustor 6 and adjust the timbre of microphone through the adjustor 7. 6. Adjust the volume of 1/A, 2/B, 3 through the adjustor 5. 7. Adjust the adjustor 8 to the middle position, and adjust the reverberation time through. the DELAY adjustor 9, and adjust the repeat time through the REPT adjustor 10.. 8. Adjust the reverberation through the adjustor 8. About the protective circuit The product has built-in overload current protection and overheat protective device, which could effectively protect the loudspeaker in case of short circuit. After activating the protective circuit, the device shall automatically cut off the output of loudspeaker and the indictors of microphone and master volume shall blink at the same time. At that time, you must pull off the power plug and check the connection of loudspeaker plug and other plugs. If the device is too hot, improve the ventilation and do not connect the power plug until the temperature is decreased. Input mode After the device is connected with the external equloments. it shall automatically display the input mode selecting interface. There are three input terminals (KARAOKE, DVD and BGM), the defaulted mode is KARAOKE. Operating method of microphone 1. It's advised to keep the microphone 5-10cm away from your mouth. 2. If the microphone is too close to mouth or. hold the microphone head, it might produce noise or echo. 14
DETAILED OPERATING METHOD Operating method of key controller #I] -D ~ KEY CONTROL --= I ~_~l~~~_~q;j~~_~~i~... D 'I # ~OO GONTROL b 1. Press the key once to decrease the tone one level by level. It could adjust in the range of b 1- b 6, and b 6 is the smallest tone. 2. After the music is over, it shall return to the defaulted sound effect in 4 seconds. [Q}]-crn-[QID-[Q!J-~-[I ] q In rising/falling the tone, press reset key to return to the defaulted tone. # 1. Press the key once to increase the tone one level by level. It could adjust in tile range of #1-#6, and #6 is the highest tone. 2. After the music is over, it shall return to the defaulted sound effect in 4 seconds. [IjJ-[Rj-~-[ll]-~-[H].. It might cause fault or wrong operation if pressing down the two or more keys at the same time. Operating method of FR 1. Rotate the FR GAIN knob and adjust to "0". ~:J'~\ FR7(/!&D't\ ';.' 'U"~, '_.' 80 7.5K -12 +12 FREQ. GAIN 2. Adjust the volume and timbre of accompanying audio device. 3. Open the microphone, if there is echo after testing; adjust the knob of FR to 12 o'clock direction. 17i~/D'~"':\ \ " i \ Iii '..' '. --~ 80 7.5K -12 +12 FREQ. GAIN 4. Rotate leftward (80Hz) or rightward (7.5KHz) slowly till no echo is produced.,--fr~ ((1) (r'~') ~./../ 80 7.5K -12 +12 FREQ. GAIN 5. After the echo is disappeared, 'fix the volume of FREQ., and then rotate the knob of FR GAIN leftward (0 direction) till no echo is produced any more.,--fr----.::'\. (~.~~) (n.~). u u 80' 7.5K -Ii '+12 FREQ. GAIN 15
A OPERATION OF REMOTE CONTROLLER The attached remote controller is applicable for DAR series products. Operating range ~,,~ ~lllitalrt.ltlljcilar"'mi1.ij1f. -==== _lpiull.y1ll :~~~~ 5MB tj'" ICl1Q~aL {!,\ 1""\'-'" ~ am I I!IDiil!IDmWWt1JrrmtIfPi!'!.,n,..." I l;;~ {~~:)",~, '~R06\o'" \'''''.. ~-:/ ~.L A ~ l' ','" 1 0 0 0 ~_...~:s.~,i" ~...:..... InCDIIl1lO~ ~<:::".Y'.. - _... _.._-.....-," "!"Own I 1I1t_l'II' DAX... IBNii!t HlCMI'OWM_IItIt.AMJIUIA"~ <;> <;> <;> I \ I --. "~I " \ I I \ I I \ I I \ II~~\ I -F~~-7m BMB I === 9~ 0<::;:10 fdio MlIhG we ~ F The available distance is 7 meters with the angle of +/-30 degrees. Precautions The effect is not good if the remote controller is under the strong sunshine. Please check whether there is any other object between the controller and the sensor. It might cause wrong operation if you press the functional keys of remote controller and device at the same time. Method of replacing the battery il~ ~I Precautions 1. If the remote controller is not so sensitive, please replace dry batteries with new ones. 2. If it's not used for a long time, please take out the dry batteries and keep them at the place out of reach of children. 3. Do not charge or heat the dry battery, it might cause fire, blast or other accidents. 16
TROUBLESHOOTING Please refer to the following steps if the product has any trouble. And if it's unable to be solved after checking, please contact our agent or service center. Troubles Causes Solutions The amplifier has no power Has no sound The AC power cord is not connected to the amplifier. The fuse is fired. The speaker cable is not connected to the loudspeaker. The volume level is too small. Connect the power cord to the amplifier. Replace the fuse. Reconnect the cable to the loudspeaker. Adjust the volume level. The volume is too small. Adjust the volume. The connection of microphone is Check the connection of couldn't hear the not good. microphone. sound of music or The connection with external Check the connection port. microphone equipment is not good. The external equipment has troubles. Check and confirm whether the external equipment is working normally. The background music The volume level of microphone is Adjust the volume level of is normal but the sound too low. microphone. of microphone is too The master volume level of Adjust the master volume level of microphone is too low. microphone....1--------... -...------_.._-...... No batteries or the battery Replace it with the new batteries. small.._..._~-_..._._-----_._._-_...._ The remote controller is not working The relay is turned on/off frequently ----_..~------_..._._...._-_.._-_..------ electricity is not enough. Take away the objects between the controller and the sensor. The loudspeaker has short circuit. The unit of loudspeaker is not good......._._---_.._--_...._---_...--_._........._--_.._------_.-.._..._-------- _.~-----_. Take away the objects between the controller and the sensor. Check a loudspeaker's connection. Check the unit of loudspeaker. The distance between the microphone Adjust the distance between the and loudspeaker is too short. microphone and loudspeaker. The echo is too big The sound of loudspeaker is mixed Rotate the loudspeaker towards with the sound of microphone. outside. The treble area is too high. Adjust the treble properly. _..._--_..._._._._.....-...._..._...-._-.-_.._..._... _._..._..._.._...-.._----_._---_..._.-._._... No ECHO effect in case Adjust the volume of ECHO. The master volume of ECHO is "0". of microphone output Adjust the master volume. "When product have some problem or broken, please don't repair in repairing store with liberty, should consult information from our after-sales center or our distributor. - Address, name and phone number - Product name, model and purchasing date -Faults (detailed description) - Expected treatment time 17
OTHERS Maintenance If the surface of product is dirty, please use the clean cloth to clean the surface, if it's too dirty, you should use the soft cloth and proper amount of detergent to clean as per the proportion of 1:4-1:5 (detergent and water) After cleaning with the wet cloth, please use the dry and clean cloth to wipe again. Do not use the volatile chemical agents such as benzene. The volatile chemical agents could damage the painting on the surface. Operating environment 1. Avoid to affect the rest of neighbors when using KARAOKE at home and note the time and place. 2. Prevent the sound affect others, it's advised to adopt the sound separation measures when using the product at home. 3. Turn down the volume at night and it's better if not using the product at night for small sound would also affect the rest of others. Property right The broadcast, sound source and CD are protected by the intellectual property right in accordance with the law of intellectual property protection. It's forbidden to use as commercial or transfer to others. Product materials The product is made from the nontoxic and hurtles materials in accordance with the relative safety rules and regulations. 18
u""-..-~a" SPECIFICATIONS Amplifier Accessories Rated power 160W x 4 / 8.Q Operating Instructions, 1 Input sensitivity/impedance KARAOKE DVD 200mV / 22kQ 300mV / 22kQ BGM, 300mV / 22kQ MIC 17mV / 3.3kQ Remote Controller 1 Dry Battery 2 Power Cable 1 Output power MUSIC EFFECTOR OUT 190 mv / 1kQ SUB WOOFER (150Hz) 5.8V / 1kQ PRE-OUT 3.6V / 1kQ VIDEO OUT 1VP- p/75 Q r-i -r-rr- r IIMII -, Timbre adjustment of music BASS MID TREBLE ± 1OdB(100Hz} ± 10dB(2KHz} ± 1OdB(10KHz} E.Ii.. Timbre adjustment of microphone BASS MID TREBLE ± 1OdB(100Hz} ± 10dB(2KHz} ± 1OdB(10KHz} = = = = = = = = = = -r:=j 1 J Power supply "'.. I~_i F"""""::.:::'"",.. BMB Power supply 230VAC, 50Hz ~ (e~l 0 666, Power 800W 0 e 8'~:, - ~ Power output terminal.. Coupled switch> 2 I...... I «;l cf «;l '= ~ (Max. 200W) I 251mm Uncoupled switch x 1 1-420mm ----'l \!.!ill!l --i (Max. 100W) (0 E E E E 0 <T> <T> - '" Dimensions (Wx H x D) Weight 420 x 159 x 415 rnrn 17.4Kg *The specifications shall be subject change without any further notice. 19
BMB BMB International Corp. http://www.bmb.com