HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical: Spindle Taper - Horizontal: Longitudinal Travel (X-Axis) (mm): Cross Travel (Y-Axis) (mm): Vertical Travel (Z-Axis) (mm): Type of Slides: Ram Travel (mm): Spindle to Table (mm): Quill Travel / Diameter (mm): Throat Depth (max.) (mm): Tilting Head (Left ~ Right): Tilting Head (Forward ~ Back): Drilling Capacity (mm): End Milling Capacity (mm): Face Milling Capacity (mm): Power Feed - Quill (mm/rev): Power Feed - Longitudinal (X-Axis) (mm/min): Power Feed - Cross (Y-Axis) (mm/min): Power Feed - Vertical (Z-Axis) (mm/min): Table T-Slot Size (inch / mm): Work Table Load Capacity (kg): Spindle Speeds Vertical (No./ rpm): Spindle Speeds Horizontal (No./ rpm): Motor Power - Vertical (kw / hp): Motor Power - Horizontal (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): $7,975.00 M579 HM-54GV 3-Axis Digital Readout Vertical & Horizontal 1000 x 240 ~ NT30 NT30 600* 200* 340 Dovetail 450 375 120 / 90 640 ±45º Fixed 40 25 80 Manual 20-2000 Optional * Optional * 14 160 Variable (100-2000) 9 (60-1350) 2.2 / 3 1.5 / 2 240 / 10 134 x 114 x 225 900 Description This HM-54GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 2.2kW / 3hp vertical motor and a 2hp motor for the horizontal spindle, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The hi-low geared head selector lever mounted on right side of milling head allows for quick change off speed range. Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage LED work light, 100mm machine vice, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 1" & 1-1/4" horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation. Extra Features: Swivel table 1" & 1-1/4" horizontal arbors Features Electronic inverter variable spindle speeds 3 Axis digital readout system Swivel table left & right with graduated scale Mill head tilts to ±45º left to right 450mm horizontally sliding and rotating ram NT30 Horizontal and vertical spindles that are hardened and ground Precision-ground dovetail slide-ways and table Precision milling table incorporating machined T slots Rear concertina slide-way cover Forward and reverse button switch Fine hand wheel operated quill feed Swarf & splash tray Page 1 of 7
Spindle lock for quill Metric dial graduations @ 0.02mm for X, Y & Z-Axis Vertical quill hand-wheel dial graduations @ 0.05mm All slides utilise dovetail construction for maximum rigidity Includes 1" & 1-1/4" arbors for the horizontal spindle * Note: X & Y travels maybe reduced due to digital readout scales and safety stops * Note: Optional Y & Z power feeds require additional parts & fitting (not included) Includes Electronic inverter variable spindle speeds 3 Axis digital readout system X-Axis power-feed Safety cutter guard Swarf tray Coolant system LED work light 100mm machine vice Drill chuck & arbor NT30 to 3MT adaptor 2MT & 3MT adaptors 8-piece metric collet chuck set (3-26mm) Specific Features Left View Head Controls 3 Axis Digital Readout System Control Panel With Digital Speed Readout Vertical Variable Speed Motor Vertical Spindle With Quill Lock Safety Cutter Guard Horizontal Spindle Page 2 of 7
Horizontal Spindle Support Horizontal Spindle Control Panel Horizontal Spindle Speed Chart Quill Feed Dial & Handles Fine Feed Quill Dial & Handle Dial High Low Speed Gear Selector Concentina Slideway Cover Tilting Head ±45º Rotating & Adjustable Sliding Ram Work Table Coolant Return Hose Rear Side View Worklight & Coolant Hose Includes Swivel Machine Vice X Axis Power Feed With Rapid Table Feed Limit Switch Swivel Table Scale Page 3 of 7
Hardened & Ground Work Table Z Axis Handle Z Axis Dial X Axis Dial X Axis Dial On Power Feed Y Axis Dial Coolant Pump Included Accessories Recommended Accessories MQ8550 M229 V106 C0965 Y-AXIS PWR FEED ADAPTOR KIT Power Feed Unit K-Type Milling Vice Clamp Kit 58 piece - Workshop Series Page 4 of 7
C9245 C928 M3301 M3321 Collet & Chuck Set - 8 Piece Collet & Chuck Set - 20 Piece Metric HSS Slot Drill & End Mill Set - 10 Piece Imperial HSS Slot Drill & End Mill Set - 10 Piece M530 M540 R004 R006 Universal Milling Kit - 3 Piece Face Mill Arbor Super Indexing Head Rotary Table M184 M197 M182 M183 Precision Boring Head Boring Head Shank Precision Boring Head Kit Precision Boring Head Kit Page 5 of 7
M193 M250 M252 M243 Boring Head Shank Parallel Set - 8 Piece Parallel Set - 18 Piece Angle Plate - Precision Ground M242 V010 V006 S090A Angle Plate - Precision Ground Alloy Steel Vee Block Cast Iron Vee Block Soluble Metal Cutting Fluid - 1 Litre S090 L345 L3455 L341 Soluble Metal Cutting Fluid - 5 Litre Handy Workshop Tips & Techniques - 1st Edition Professional Sheet Metal Fabrication Book Fitting and Machining Technical Book Page 6 of 7
L300 M9991 M800 M805 Magnetic Clean up Tool Magnetic Floor Sweeper Rubber Mat - Anti-Fatigue Rubber Mat - Anti-Fatigue M780 M781 M782 O000 Industrial Flooring Tiles Workshop Industrial Flooring Tiles Workshop Industrial Flooring Tiles Workshop SpillFix Universal Orgainic Absorbent O043 O042 O040 O044 FLUFILM Rust & Corrosion Preventive Penetrant & Lubrication FLUFILM General Purpose Lubricant & Corrosion Inhibitor FLUFILM Rust & Corrosion Preventive Penetrant & Lubrication FLUFILM Rust & Corrosion Preventive Penetrant & Lubrication Powered by TCPDF (www.tcpdf.org) Page 7 of 7