HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical: Spindle Taper - Horizontal: Longitudinal Travel (X-Axis) (mm): Cross Travel (Y-Axis) (mm): Vertical Travel (Z-Axis) (mm): Type of Slides: Ram Travel (mm): Spindle to Table (mm): Quill Travel / Diameter (mm): Throat Depth (max.) (mm): Tilting Head (Left Right): Tilting Head (Forward Back): Drilling Capacity (mm): End Milling Capacity (mm): Face Milling Capacity (mm): Power Feed - Quill (mm/rev): Power Feed - Longitudinal (X-Axis) (mm/min): Power Feed - Cross (Y-Axis) (mm/min): Power Feed - Vertical (Z-Axis) (mm/min): Table T-Slot Size (inch / mm): Work Table Load Capacity (kg): Spindle Speeds Vertical (No./ rpm): Spindle Speeds Horizontal (No./ rpm): Motor Power - Vertical (kw / hp): Motor Power - Horizontal (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): M160D HM-50 3-Axis Digital Readout Vertical 1000 x 240 NT30 600* 200* 340 Dovetail 340 430 125 / 90 600 ±90º Fixed 30 25 80 Manual 20-2000 Optional * Optional * 14 175 9 (220-2400) 1.5 / 2 240 / 10 134 x 114 x 222 850 Description A well-built entry level turret milling / drilling machine with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The screwed belt guard covers on each side of the head offer secure safety whilst providing easy access to the belts and pulleys for speed changing. Other features include 3 axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 150mm machine vice, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation. Features 3 Axis digital readout system Mill head tilts to ±90º left to right 340mm horizontally sliding and rotating ram NT30 vertical spindle is hardened and ground Precision-ground dovetail slide-ways and table Precision milling table incorporating machined T-slots Rear concertina slide-way cover Forward and reverse on/off switch Fine hand wheel operated quill feed Swarf & splash tray Spindle lock for quill Metric dial graduations @ 0.02mm for X, Y & Z-Axis Vertical quill hand-wheel dial graduations @ 0.05mm All slides utilise dovetail construction for maximum rigidity * Note: X & Y travels maybe reduced due to digital readout scales and safety stops * Note: Optional Y & Z power feeds require additional parts & fitting (not included) Page 1 of 7
Includes 3 Axis digital readout system X-Axis power feed Safety cutter guard Swarf tray Coolant system Halogen lamp 150mm machine vice Drill chuck & arbor 2 & 3MT adaptors 8-piece metric collet chuck set (4-16mm) Specific Features Left View Head Left View Head Right View 3-Axis Digital Readout System Quill Feed Handle and Fine Feed Dial Quill Fine Feed Handle Quill Handle Lock X-Axis Power Feed with Rapid X-Axis Dial Y-Axis Dial Knee Feed Handle Knee Feed Dial Page 2 of 7
Table Feed Limit Switches Spindle Speed Chart Control Panel Halogen Work Light and Coolant Hose Coolant System Concertina Slide Way Cover Tilting Head Scale Adjustable Swivel and Sliding Ram Machine Vice Accessories Included, 150mm Vice, Metric Collet Chuck Set, Dril Chuck and Arbor, Morse Taper Adaptors Page 3 of 7
Recommended Accessories M229 V106 C0965 C9245 Power Feed Unit K-Type Milling Vice Clamp Kit 58 piece - Workshop Series Collet & Chuck Set - 8 Piece C928 M3301 M3321 M530 Collet & Chuck Set - 20 Piece Metric HSS Slot Drill & End Mill Set - 10 Piece Imperial HSS Slot Drill & End Mill Set - 10 Piece Universal Milling Kit - 3 Piece Page 4 of 7
M540 R004 R006 M184 Face Mill Arbor Super Indexing Head Rotary Table Precision Boring Head M197 M182 M183 M193 Boring Head Shank Precision Boring Head Kit Precision Boring Head Kit Boring Head Shank M250 M252 M243 M242 Parallel Set - 8 Piece Parallel Set - 18 Piece Angle Plate - Precision Ground Angle Plate - Precision Ground Page 5 of 7
V010 V006 S090A S090 Alloy Steel Vee Block Cast Iron Vee Block Soluble Metal Cutting Fluid - 1 Litre Soluble Metal Cutting Fluid - 5 Litre L345 L3455 L341 L300 Handy Workshop Tips & Techniques - 1st Edition Professional Sheet Metal Fabrication Book Fitting and Machining Technical Book Magnetic Clean up Tool M9991 M800 M805 O043 Magnetic Floor Sweeper Rubber Mat - Anti-Fatigue Rubber Mat - Anti-Fatigue FLUFILM Rust & Corrosion Preventive Penetrant & Lubrication Page 6 of 7
O042 O044 FLUFILM General Purpose Lubricant & Corrosion Inhibitor FLUFILM Rust & Corrosion Preventive Penetrant & Lubrication Powered by TCPDF (www.tcpdf.org) Page 7 of 7