ESIDENTIAL philihardware.com
New The IP/IS Series Interconnected Lock is a new addition to our contemporary locks. They are designed to fit with ADA requirements. 1
Security Features 200B Series ANSI Grade 3 Certified Deadbolt (ANSI/BHMA A156.5-2001) for Auxiliary Lock and Associated Products Product meets and exceeds ANSI Grade 3 requirements for auxiliary locks CONSTUCTION Steel construction for long-lasting operation. Exposed trim finish meets or exceeds 96hrs Salt Spray test required by ANSI (American National Standard Institute.) OUTSIDE COVE Wrought brass or stainless steel cover. Twisting the latch bolt to adjust the backset. STIKE SCEWS Combination screws suitable for both wood door or metal door mounting. Standard 1-3/4 x 2-1/4 full lip strike. CYLINDE 5pins tumbler cylinder LATCH ¼ dia hardened steel rod insert to resist sawing and cutting. Full 1 throw antirust stainless steel latch bolt. 1 x 2-1/4 Mortise in deadlatch, adjustable for both 2-3/8 and 2-3/4 backset requirement. Precision cylinder construction provides excellent operative durability and reliability. Pre-drilled construction hole for construction keying. Nickel plated solid brass key. 500T Series ANSI Grade 3 Certified Leverset (ANSI/BHMA A156.2-2003) for bored & preassembled locks & latches Product meets and exceeds ANSI Grade 3 requirements for single-point locks and latches Solid Zinc lever. eversible lever design for both right-hand and left-hand door mounting. Multiple design and finish to meet variety demands. (Please refer to page 9-10 for detail) SCEWS Combination screws suitable for both wood door or metal door mounting. LEVE OSETTE Wrought brass or stainless steel cover. CONSTUCTION Steel construction with square spindle mechanism for long lasting operation. Exposed trim finish meets or exceeds 96hrs Salt Spray test required by ANSI (American National Standard Institute). Interior and exterior aligning tabs. For mounting on ø2-1/8" standard door prep. STIKE Standard 1-3/4 x 2-1/4 full lip strike with adjustable tab. CYLINDE 5pins tumbler cylinder LATCH 1 x 2-1/4 Mortise in latch, adjustable for both 2-3/8 and 2-3/4 backset requirement. Industrial standard 1/2 throw latch bolt. Precision cylinder construction provides excellent operative durability and reliability Pre-drilled construction hole for construction keying. Nickel plated solid brass key. 2
Contemporary Design KELLINGTON HANDLESET AM SEIES LEVE HOLLYWOOD (HW) 2-33/64" 2-3/8"~2-3/4" 3-15/16" 2-23/64" 1/2 3-15/16" 1-3/8"~2" 37/64" 2-1/4" 1" 1-3/8"~2" 2-3/8 ~2-3/4 2-3/4 1 SOHO C (SH) US26 ound osette 4-1/2 3-1/2 2-1/4 1-3/8 ~1-3/4 1-1/8 1 5 or 5-1/2 2-1/4 2 13-15/16 2-31/64 2-3/4 8-27/64 KELLINGTON (KN) SOHO SQ (SH) Square osette 2-11/32" 1/2 3-15/16" 1-3/8"~2" FINISHES Satin Nickel US26 US26D Polish Chrome Satin Chrome (Soho & Deadbolt only) AUSTIN (AT) US26 3
5-1/2 CTC INTECONNECTED LOCK NEW! ANSI Grade 3 UL LISTED 200LT DEADBOLT LT US26 IP US26 SPECIFICATIONS IS US26 Door Prep Door Fitting Cylinder Latch Latch Bolt Strike Door Handing ADA 2-1/8 cross bore, 1 edge bore. Handleset: 1-3/8 ~1-3/4, 2 door with thick door kit. Deadbolt/Lever 1-3/8 ~2. KW1 standard, SC1 optional. 2-3/8 and 2-3/4 adjustable. UL latch for IS/IP series. Deadbolt: 1 throw. Lever: 1/2 throw. 2-1/4 full lip round corner. Handleset/Privacy Lever: handed (specify LH or H when ordering). Deadbolt Interior turn piece & Privacy Lever with Push Button. Meets 4.13.9 ADA requirements. LTS US26 by PHILADELPHIA HADWAE GOUP 4
Interconnected ENTANCE HANDLESETS NEW! CHATEAU (CH) US10B FAIMONT (FT) 2-3/8 and 2-3/4 1-3/8 ~ 2 2-27/32 4-7/32 15-29/32 3-1/16 2-3/8 and 2-3/4 1-3/8 ~ 2 3-1/8 16-3/4 10-9/32 2-13/32 5-1/2 4-9/64 oyal 7-15/16 5-1/2 Venezia uby 7-15/16 2-3/4 2-53/64 2-3/8 and 2-3/4 1-3/8 ~ 2 2-27/32 15-27/32 5-1/2 7-15/16 4-1/16 Hartford 2-53/64 ICHMOND (I) PVD HAMPTON (HA) US12P 5
Solid Brass 500TB SEIES LEVESETS ANSI Grade 3 HATFOD (HD) US12P 1-3/8 ~ 1-3/4 2-9/32 2-9/32 4-7/32 1-3/8 ~ 1-3/4 2-31/64 2-13/32 FASCINITE (FE) A 4-11/64 LAFAYETTE (LA) 1-3/8 ~ 1-3/4 2-7/8 2-19/32 4-7/32 1-3/8 ~ 1-3/4 2-13/32 2-13/32 VENEZIA (VA) US10B 4-1/16 by PHILADELPHIA HADWAE GOUP 6
Interconnected IL SEIES UL LISTED 301IL-CT Charlotte (CT) Lever 300IL-Y oyal (Y) Lever 300IL-SD San Diego (SD) Lever 3-5/16 3-5/16 4 7-15/16 4 4-43/64 4-39/64 1-3/8 ~ 1-3/4 1-5/8 ~ 2 Mounting without Exterior Escutcheon Plate 7
NEW! IZ SEIES ANSI Grade 2 UL LISTED 2-3/8 2-3/4 1-5/64 1-3/8 ~ 1-3/4 45/64 2-53-64 17/32 1-57/64 2-61/64 5-1/2 9-19/32 2-41/64 4-9/64 301IZ-CT Charlotte (CT) Lever 7/16 23/64 27/64 11/32 301IZ-CT- Charlotte (CT) Lever INTEIO APPLICATION 301IZ-SD- San Diego (SD) Lever South Bay Escort by PHILADELPHIA HADWAE GOUP 8
Handlesets & Levers 400 SEIES HANDLESETS 500T SEIES LOCKSETS OYAL (Y) US10B MANHATTAN (MH) US5 ESCOT (ET) US3 MAYFAI (MA) US10B PALME (PA) US26 IMPEIAL (IM) SHELBY (SY) US12P KELLINGTON (KN) US12P 9
Lever Design ANSI Grade 3 500T SEIES LOCKSETS CAMBE (CM) JUAN (JU) A NEW! Knob Design 100T SEIES LOCKSETS UBY (B) US12P OLYMPUS (OS) US10B COMBOSET 300T Series BALA (BA) US32D GUADIAN (GN) US32D 300T US32D ESCUTCHEON PLATE 5 CENTE TO CENTE US3 by PHILADELPHIA HADWAE GOUP 10
Deadbolt 200B SEIES SINGLE CYLINDE US3 DOUBLE CYLINDE US3 ONE SIDED (Full Bore) US32D ONE SIDED (Half Bore) US32D Sliding DOO LOCK SPECIFICATIONS 2-3/4 2-1/4 US3 Passage Privacy Door Prep Door Fitting Exposed Trim Strike 2-1/4 H x 1-3/4 W notch. 1-3/8 ~ 1-3/4 door thick. Brass, stainless steel, or zinc alloy. 1 x 2-1/4 rectangular. NEW! Fits 2-1/8 cross bore 2-3/8 fixed backset latch Passage Privacy FINISHES PVD Lifetime US3 Polish Brass US5 Antique Brass US10B Oil ubbed Bronze US12P Tuscany Bronze Satin Nickel A Pewter US26 Polish Chrome Not all styles available in all finishes. See finish chart on page 12 for details. 11
Finish AVAILABILITY SEIES ITEM Abbrev PVD US3 US5 US10B US12P A US26 US26D US32D 505 605 609 613 619 620 625 626 630 Interconnected Handleset and Solid Brass Levers 400 Interconnected 500TB Solid Brass CHATEAU FAIMONT HAMPTON ICHMOND FASCINITE HATFOD LAFAYETTE VENEZIA Handleset, Interconnected Lock, Levers, Knob, Deadbolt and Combo Pack 400 2PC Type 500T IMPEIAL KELLINGTON MAYFAI CAMBE ESCOT JUAN MANHATTAN PALME OYAL SHELBY (IM) (KN) (MA) (CM) (ET) (JU) (MH) (PA) (Y) (SY) 300IL 4 CTC 300IZ 5-1/2CTC 200B 100T DEADBOLT BALA GUADIAN OLYMPUS UBY (CH) (FT) (HA) (I) (FE) (HD) (LA) (VA) (BA) (GN) (OS) (B) 300T/310T Combo Contemporary Interconnected Lock, Levers and Deadbolt 500AM Contemporary 301IP 5-1/2 CTC AUSTIN HOLLYWOOD SOHO (AT) (HW) (SH) 301IS 5-1/2 CTC 200TS 200T DEADBOLT DEADBOLT Accessories Product avaialble in stock. Please refer to price book for details. Other finishes may be available upon request. Please allow longer lead time, min. 300 lock order. Lock Strikes 9101 9102 9103 9108 9125 1-1/8 x 2-3/4 T type with tab Deadbolt Strikes 1-3/4 x 2-1/4 Full lip with tab square corner 9111 9112 9113 1-3/4 x 2-1/4 Full lip with tab 1/4 radius round corner 1-3/4 full round with tab for tubular type drive-in latch 9117 9119 1-1/4 x 2-3/4 T type adjustable Keys 1-1/8 x 2-3/4 ectangular square corner 1 x 2-1/4 ectangular square corner 1 x 2-1/4 ectangular 1/4 radius round corner 1-3/4 x 2-1/4 Full lip 1/4 radius round corner 1-1/4 x 3-5/8 Security strike 1/4 radius round corner KW1 5-Pins SC1 5-Pins SC4 6-Pins 9301-K KW1 TE5 HK5 SC5 HK6 SC6 9301-S SC1 & SC4 by PHILADELPHIA HADWAE GOUP 12
Accessories Dead Latches for 100T Entrance Optional: 9071 square corner D904 Mortise Dead Latch 1 x 2-1/4 ound Corner Faceplate Dead Latches for 500TZ Entrance Optional: 9045 square corner 9073 9075 Drive-in Dead Latch 1 Diameter Dead latch drive-in cap for converting mortise latch to Drive-in Latch Spring Latches for 101T, 102T, 501TZ, 502TZ Optional: 9072 square corner D907 9074 Mortise Spring Latch 1 x 2-1/4 ound Corner Faceplate 9076 Drive-in Spring Latch 1 Diameter Spring latch drive-in cap for converting mortise latch to Drive-in Latch 9045 Dead Latches for 500TB Entrance Optional: 9050 square corner 9050UL UL square corner 9050UL UL round corner 9050 Mortise Dead Latch (Brass Bolt) 1 x 2-1/4 ound Corner Faceplate 9050C Drive-in Dead Latch (Brass Bolt) 1 Diameter Spring Latches for 400 Interconnected Handleset (I/CH/HA/FT), 501TB, 502TB, and 400 Handleset (MA/IM/KN) with Solid Brass lever (VA/HD/FE/LA) Optional: 9079 square corner 9079UL UL square corner 9079UL UL round corner 9079 Mortise Spring Latch (Brass Bolt) 1 x 2-1/4 ound Corner Faceplate Latches for 200B Optional: 9091 square corner 9091UL UL square corner 9092UL UL round corner D909 9092 Mortise Deadbolt Latch 1 x 2-1/4 ound Corner Faceplate 9093 Drive-in Deadbolt Latch 1 Diameter Deadbolt latch drive-in cap for converting mortise latch to Drive-in Latch Spring Latches for 400 Handleset (MA/IM/CA/KN) Optional: 9080 square corner 9080UL UL square corner 9080UL UL round corner 9080 Mortise Spring Latch 1 x 2-1/4 ound Corner Faceplate 9080C Drive-in Spring Latch 1 Diameter Spring Latches for AM Series (SH/HW/AT) Optional: G90A3T square corner G90A3 Mortise Spring Latch 1 x 2-1/4 ound Corner Faceplate Mortise Dead Latch 1 x 2-1/4 ound Corner Faceplate 9079C G90A3C D924 9045C Drive-in Dead Latch 1 Diameter Dead latch drive-in cap for converting mortise latch to Drive-in Latch D927 Drive-in Spring Latch 1 Diameter Spring latch drive-in cap for converting mortise latch to Drive-in Latch D927 Parts Drive-in Spring Latch 1 Diameter Spring latch drive-in cap for converting mortise latch to Drive-in Latch 9782 4-way plate is available for converting drive-in latch to 1 x 2-1/4 square mortise latch. 13
Functions 410 400 405 400 Series Handleset ANSI A156.2, Series 4000, Grade 3 400 Single Cylinder Handleset Deadbolt thrown or retracted by key from outside or by inside turnpiece. Latch retracted by thumbpiece from outside or by inside knob/lever. 400 Single Cylinder Interconnected Handleset (ANSI F102) Deadbolt thrown or retracted by key from outside or by inside turnpiece. Latch retracted by thumbpiece from outside or by inside knob/lever. Both deadbolt and latch bolt are retracted to unlocked position by operating inside lever. 410 Double Cylinder Handleset Deadbolt thrown or retracted by key from either side. Latch retracted by thumbpiece from outside or by inside knob/lever. 405 Dummy Handleset For use as door pull or as dummy trim on inactive leaf of double door. Fixed thumbpiece and inside knob/lever. Dummy cylinder with inside plate. 500T 501T 502TP 500TP 502T 515T 500T Series Lever Lock ANSI A156.2, Series 4000, Grade 3 500T Entrance Turn button lock/unlock outside lever. Key lock/unlock from outside. 500TP Entrance (Push Button) Push inside button locks outside lever. Key lock/unlock from outside. Unlock by push down inside lever. 501T Passage Both levers always unlocked. 502T Privacy Turn inside button locks outside lever. Can be opened from outside using outside turn mechanism. 500TP/502TP Push Button available 502TP Privacy (Push Button) Turn inside button locks outside lever. Can be opened from outside using outside turn mechanism. Unlock by push down inside lever. 515T Dummy Dummy trim for one side on door. Used for door pull or matching inactive trim. 101T 115T 100T 102T 100T Series Knob Lock ANSI A156.2, Series 4000, Grade 3 100T Entrance Turn button lock/unlock outside knob. Key lock/unlock from outside. 101T Passage Both knobs always unlocked. 102T Privacy Turn inside button locks outside knob. Can be opened from outside using outside turn mechanism. 115T Dummy Dummy trim for one side on door. Used for door pull or matching inactive trim. 210 206 200 205 200 Series Deadbolt Lock ANSI A156.36, Grade 3 200 Single Cylinder Deadbolt thrown or retracted by key from outside or by inside turnpiece. 210 Double Cylinder Deadbolt thrown or retracted by key from either side. 205 One-sided Half-Bore Deadbolt thrown or retracted by thumbpiece from inside. 206 One-sided Full-Bore Deadbolt thrown or retracted by thumbpiece from inside. Cover plate outside. 301 300 304 300 Series Interconnected Locks ANSI A156.12, Grade 3 301 Entrance Single Locking, ANSI F95 Latch bolt operated by lever from either side. Deadbolt operated by turn from inside or key from outside. Operating inside lever retracted both deadbolt and latch bolt. 300 Entrance Double Locking, ANSI F97 Deadbolt operated by key from outside or by turnpiece inside. Deadlatch is locked by key from outside or by push button from inside. Turn inside lever to release deadbolt and latchbolt simultaneously for immediate exit. Latch deadlocks when door is closed. 304 Storeroom Double Locking, ANSI F98 Deadbolt operated by key from outside or by turnpiece inside. Outside lever is fixed, entrance by key only. Turn inside lever to release deadbolt and latchbolt simultaneously for immediate exit. Latch deadlocks when door is closed. by PHILADELPHIA HADWAE GOUP 14
DISTIBUTION BY: Philadelphia Hardware Group Inc. SAN DIEGO DISTIBUTION CENTE (Home Office) 6590 Top Gun Street San Diego, CA 92121 Tel: (858) 642-0450 Fax: (858) 642-0454 Toll Free Tel: 1-800-545-2309 Toll Free Fax: 1-800-828-0988 www.philihardware.com CHICAGO DISTIBUTION CENTE 3687 Darlene Court Aurora, IL 60504 Toll Free Tel: 1-800-545-2309 ATLANTA DISTIBUTION CENTE 2319 Defoor Hills oad N.W. Atlanta, GA 30318 Toll Free Tel: 1-800-545-2309 Copyright 2015 Philadelphia Hardware Group Inc. All rights reserved.