BRITISH STANDARD MORTICE LOCKS FOREND EASILY REVERSIBLE LATCH (NO NEED TO REMOVE TOP PLATE) SPRING SLOTS TO ACCOMMODATE BOLT THROUGH FURNITURE ERA British Standard Mortice Locks are manufactured to conform to the BSI Specification for Thief Resistant Locks - BS3621:2007. This standard was created by a Standards Committee comprising of representatives from the police, government departments, local authorities, architects, window and door manufacturers and lockmakers. It provides a reference for type-testing and certification of thief resistant locks. Before the standard is awarded to a mechanical key operated lock, designed for fixing to hinged or sliding doors, it has to be passed by an independent panel of locksmith experts. Once a lock has been accredited with the BS3621:2007 standard, it is recognised as giving the maximum protection generally available to the majority of both domestic and commercial premises. Many insurance companies recognise this and reduce premiums accordingly, whilst some will provide cover only if such locks are fitted. For a lock to be awarded BS3621:2007 it has to achieve the following criteria; At least 1000 different key patterns (differs) and 999 different locks must be made before any key pattern can be used again. There must be at least 5 moveable levers used. If fewer than 9 levers are fitted there must be additional anti-picking precautions incorporated (such as false notching). If a key can be used on both sides of a door, both sides must offer equal security. Handles and knobs must not operate the bolt when deadlocked. ing must be effective before the key can be removed. The bolt must project not less than 20mm when locked. Both sides of the lock body must be protected by anti-drilling plates. Vulnerable fixing screws on all parts of the lock, cylinder and staple must be concealed or inoperable when the door is locked. BOLT HARDENED STEEL PLATES BOLT THROWER HARDENED STEEL ANTI-DRILL PLATES STEEL LEVERS WITH FALSE NOTCHING CROSS SECTION OF REBATE DOORS INWARD OPENING OUTWARD OPENING REBATE SETS For French doors, when a Mortice or is fitted, a Rebate Set should also be fitted to ensure secure closing. The measurement A must be either 1 /2 or 1 where upon the appropriate sized rebate set should be used. Rebate Sets are supplied non-handed for use on either left or right handed fitment. LH OUTSIDE RH OUTSIDE LH OUTSIDE RH OUTSIDE HANDING OF SASHLOCKS Hinged doors can open in one of four ways and this will determine whether the door is left or right handed. All ERA Mortice s are supplied handed left. Instructions are supplied for alteration to right handed fitment.
BRITISH STANDARD HIGH SECURITY FORTRESS CLASSIC MORTICE LOCK BS3621:2007 This 5 lever British Standard High Security Mortice Lock to BS3621:2007 standard meets the exacting demands of the insurance companies and the Police. The Fortress Classic brings traditional style and craftsmanship to a modern mortice lock through its brass components. These brass components include 5 solid brass levers, key cam, follower, latchbolt, deadbolt, and 3 brass keys. Higher security levels are delivered by a 20mm bolt throw on every lock, and both the and have hardened steel plates to resist drilling, and four hardened steel rollers in the deadbolt resist hacksawing The Fortress features a pull and twist action latch which can easily reverse the hand of the lock without the removal of the lock cover or screws. The Fortress Rebates are available in two sizes 12.7mm (1/2 ) and 25.4mm (1 ) - with a choice of either Brass effect, Satin or Chrome effect finishes to match the forends. The rebates are non-handed and come complete with full fitting instructions. Brass 64mm (2 1 /2 ) 1-31 Satin 64mm (2 1 /2 ) 1-51 Chrome Effect 64mm (2 1 /2 ) 1-61 Brass 76mm (3 ) 331-31 Satin 76mm (3 ) 331-51 Chrome Effect 76mm (3 ) 331-61 Brass 64mm (2 1 /2 ) 2-31 Satin 64mm (2 1 /2 ) 2-51 Chrome Effect 64mm (2 1 /2 ) 2-61 Brass 76mm (3 ) 332-31 Satin 76mm (3 ) 332-51 Chrome Effect 76mm (3 ) 332-61 All the above products are also available Clam-packed Spare Keys Cut key 502-06 Key blank 602-06 Rebates Brass Effect 12.7mm ( 1 /2 ) 426-31 Satin 12.7mm ( 1 /2 ) 426-51 Chrome Effect 12.7mm ( 1 /2 ) 426-61 Brass Effect 25.4mm (1 ) 427-31 Satin 25.4mm (1 ) 427-51 Chrome Effect 25.4mm (1 ) 427-61 Rebates Brass Effect 12.7mm ( 1 /2 ) 428-31 Satin 12.7mm ( 1 /2 ) 428-51 Chrome Effect 12.7mm ( 1 /2 ) 428-61 Brass Effect 25.4mm (1 ) 429-31 Satin 25.4mm (1 ) 429-51 Chrome Effect 25.4mm (1 ) 429-61 HIGH SECURITY FORTRESS CLASSIC MORTICE DEADLOCK HIGH SECURITY FORTRESS CLASSIC MORTICE SASHLOCK Locksmith Kit 503103-00 13 180 54 96 178 178 19 19 57 89 109 162 26 30 All dimensions in mm.
BS3621:2007 BRITISH STANDARD HIGH SECURITY FORTRESS MORTICE LOCK This 5 lever British Standard High Security Mortice Lock to BS3621:2007 standard meets the exacting demands of the insurance companies and the Police. Higher security levels are delivered by a 20mm bolt throw on every lock, and both the and have hardened steel plates to resist drilling, and two hardened steel plates in the deadbolt resist hacksawing The Fortress features a latch bolt which can be easily reversed without the removal of the lock cover. The keys have 1,000 variations for added security. All steel levers have false notching to resist lock picking. The Fortress Rebates are available in two sizes 12.7mm (1/2 ) and 25.4mm (1 ) - with a choice of either Brass effect, Satin or Chrome effect finishes to match the forends. The rebates are non-handed and come complete with full fitting instructions. HIGH SECURITY FORTRESS MORTICE DEADLOCK HIGH SECURITY FORTRESS MORTICE SASHLOCK Brass Effect 64mm (2 1 /2 ) 261-31 Satin 64mm (2 1 /2 ) 261-51 Chrome Effect 64mm (2 1 /2 ) 261-61 Brass Effect 76mm (3 ) 361-31 Satin 76mm (3 ) 361-51 Chrome Effect 76mm (3 ) 361-61 Brass Effect 64mm (2 1 /2 ) 262-31 Satin 64mm (2 1 /2 ) 262-51 Chrome Effect 64mm (2 1 /2 ) 262-61 Brass Effect 76mm (3 ) 362-31 Satin 76mm (3 ) 362-51 Chrome Effect 76mm (3 ) 362-61 All the above products are also available Clam-packed Spare Keys Cut key 502-56 Key blank 602-56 Rebates Brass Effect 12.7mm ( 1 /2 ) 426-31 Satin 12.7mm ( 1 /2 ) 426-51 Chrome Effect 12.7mm ( 1 /2 ) 426-61 Brass Effect 25.4mm (1 ) 427-31 Satin 25.4mm (1 ) 427-51 Chrome Effect 25.4mm (1 ) 427-61 Rebates Brass Effect 12.7mm ( 1 /2 ) 428-31 Satin 12.7mm ( 1 /2 ) 428-51 Chrome Effect 12.7mm ( 1 /2 ) 428-61 Brass Effect 25.4mm (1 ) 429-31 Satin 25.4mm (1 ) 429-51 Chrome Effect 25.4mm (1 ) 429-61 Locksmith Kit 502102-00 13 180 96 178 178 19 19 57 89 109 162 26 30 All dimensions in mm.
BRITISH STANDARD HIGH SECURITY FORTRESS EURO CYLINDER LOCK BS3621:2004 BS3621:2004 This British Standard High Security Euro Cylinder Lock to BS3621:2004 standard meets the exacting demands of the insurance companies and the Police. Higher security levels are delivered by a 20mm bolt throw on every lock, and both the and have hardened steel plates to resist drilling, and four hardened steel rollers in the deadbolt to resist hacksawing. Each lock comes complete with a High Security 6 pin Euro Profile Cylinder resistant against picking or drill attack. Bolt through heavy-duty security roses protect the cylinder. The Fortress features a pull and twist action latch which can easily reverse the hand of the lock without the removal of the lock cover or screws. The Fortress Rebates are available in two sizes 12.7mm (1/2 ) and 25.4mm (1 ) - with a choice of either Brass effect, Satin or Chrome effect finishes to match the forends. The rebates are non-handed and come complete with full fitting instructions. Brass Effect 64mm (2 1 /2 ) 263-31 Satin 64mm (2 1 /2 ) 263-51 Chrome Effect 64mm (2 1 /2 ) 263-61 Brass Effect 76mm (3 ) 363-31 Satin 76mm (3 ) 363-51 Chrome Effect 76mm (3 ) 363-61 Brass Effect 64mm (2 1 /2 ) 264-31 Satin 64mm (2 1 /2 ) 264-51 Chrome Effect 64mm (2 1 /2 ) 264-61 Brass Effect 76mm (3 ) 364-31 Satin 76mm (3 ) 364-51 Chrome Effect 76mm (3 ) 364-61 All the above products are also available Clam-packed Rebates Brass Effect 12.7mm ( 1 /2 ) 426-31 Satin 12.7mm ( 1 /2 ) 426-51 Chrome Effect 12.7mm ( 1 /2 ) 426-61 Brass Effect 25.4mm (1 ) 427-31 Satin 25.4mm (1 ) 427-51 Chrome Effect 25.4mm (1 ) 427-61 Rebates Brass Effect 12.7mm ( 1 /2 ) 428-31 Satin 12.7mm ( 1 /2 ) 428-51 Chrome Effect 12.7mm ( 1 /2 ) 428-61 Brass Effect 25.4mm (1 ) 429-31 Satin 25.4mm (1 ) 429-51 Chrome Effect 25.4mm (1 ) 429-61 HIGH SECURITY FORTRESS EURO CYLINDER DEADLOCK HIGH SECURITY FORTRESS EURO CYLINDER SASHLOCK 13 180 54 96 178 178 28 28 48 89 26 109 162 30 All dimensions in mm.
BS8621:2004 BS8621:2004 BRITISH STANDARD KEYLESS EGRESS MORTICE LOCK The conflict between a secure British Standard accredited front door lock and fire safety recommendations has now been overcome thanks to the new Keyless Egress Range. The new BS8621:2004 standard mirrors the BS3621:2004 but is for escape locks. The locks are classified as providing keyless egress at all times. This applies where there is a requirement for an easy action method of opening an external door from the inside with no need for keys or similar devices for unlocking. Especially relevant for entrance doors in multi-residential and other buildings. A keyless lever on the inside of the door ensures its possible to make an emergency escape in the event of a fire. HIGH SECURITY FORTRESS EURO THUMBTURN CYLINDER DEADLOCK HIGH SECURITY FORTRESS EURO THUMBTURN CYLINDER SASHLOCK Euro Thumbturn Dead Lock Brass 64mm (2 1/ 2 ) 3-31 Satin 64mm (2 1/ 2 ) 3-51 Chrome Effect 64mm (2 1/ 2 ) 3-61 Brass 76mm (3 ) 333-31 Satin 76mm (3 ) 333-51 Chrome Effect 76mm (3 ) 333-61 Euro Thumbturn Sash Lock Brass 64mm (2 1/ 2 ) 4-31 Satin 64mm (2 1/ 2 ) 4-51 Chrome 64mm (2 1/ 2 ) 4-61 Brass 76mm (3 ) 334-31 Satin 76mm (3 ) 334-51 Chrome 76mm (3 ) 334-61 Oval Thumbturn Dead Lock Brass 64mm (2 1/ 2 ) 5-31 Satin 64mm (2 1/ 2 ) 5-51 Chrome 64mm (2 1/ 2 ) 5-61 Brass 76mm (3 ) 335-31 Satin 76mm (3 ) 335-51 Chrome 76mm (3 ) 335-61 Oval Thumbturn Sash Lock Brass 64mm (2 1/ 2 ) 6-31 Satin 64mm (2 1/ 2 ) 6-51 Chrome 64mm (2 1/ 2 ) 6-61 Brass 76mm (3 ) 336-31 Satin 76mm (3 ) 336-51 Chrome 76mm (3 ) 336-61 Thumbturn 35/35 Double Euro Cylinder 35/35 Brass (6 Pin) 4270-31 35/35 Satin (6 Pin) 4270-51 35/35 Chrome (6 Pin) 4270-61 Thumbturn 35/35 Double Oval Cylinder 35/35 Brass (6 Pin) 4273-31 35/35 Satin (6 Pin) 4273-51 35/35 Chrome (6 Pin) 4273-61 13 180 54 96 178 178 28 28 48 89 26 109 162 30 All dimensions in mm.
EURO PRO-FIT (NON BS) MORTICE LOCK RANGE The ERA Euro Pro-Fit offers total versatility allowing for most Euro Profile locking cylinders. Available as both and. They are ideal for replacing most existing door locks with minimal change to existing fittings. The lock has hardened steel rollers in the bolt to resist hacksawing. The Euro Pro-Fit features an easily reversible latch bolt, making the lock suitable for left or right hinged doors. Rebate Sets for the Euro Pro-Fit Range are available separately. Oval Cylinder versions are also available. Brass Effect 64mm (2 1 /2 ) 225-31 Satin 64mm (2 1 /2 ) 225-51 Brass Effect 76mm (3 ) 325-31 Satin 76mm (3 ) 325-51 Brass Effect 64mm (2 1 /2 ) 226-31 Satin 64mm (2 1 /2 ) 226-51 Brass Effect 76mm (3 ) 326-31 Satin 76mm (3 ) 326-51 The above products are also available Clam-Packed. EURO PRO-FIT (NON BS) DEADLOCK Rebate Sets Brass Effect 12.7mm ( 1 /2 ) Rebate 434-31 Satin 12.7mm ( 1 /2 ) Rebate 434-51 Brass Effect 25.4mm (1 ) Rebate 435-31 Satin 25.4mm (1 ) Rebate 435-51 Rebate Sets Brass Effect 12.7mm ( 1 /2 ) Rebate 436-31 Satin 12.7mm ( 1 /2 ) Rebate 436-51 Brass Effect 25.4mm (1 ) Rebate 4-31 Satin 25.4mm (1 ) Rebate 4-51 Euro Profile Cylinders See Cylinders section for more details EURO PRO-FIT (NON BS) SASHLOCK 96 87 40 19 All dimensions in mm. Numbers in brackets relate to 3 version of lock
VISCOUNT MORTICE LOCK RANGE The ERA 5 Lever Viscount range of door locks are suitable to replace existing 2 and 3 lever door locks. They are available as both and s. Ideal for the volume user, the Viscount offers long service in demanding situations and is the right choice for replacement or new build projects. The Viscount is also available as a rebated lock, suitable for rebated French doors. The latch is easily reversed. Hardened steel rollers in the bolt resist hacksawing and levers have false notching to resist lock picking. ERA Viscount Rebate Sets are also available individually, in two sizes - 12.7mm ( 1 /2 ) and 25.4mm (1 ). Rebate Sets are nonhanded to reduce stock-holding. Full fitting instructions are supplied. VISCOUNT 5 LEVER DEADLOCK VISCOUNT 5 LEVER SASHLOCK Brass Effect 64mm (2 1 /2 ) 201-31 Satin 64mm (2 1 /2 ) 201-51 Brass Effect 76mm (3 ) 301-31 Satin 76mm (3 ) 301-51 Brass Effect 64mm (2 1 /2 ) 202-31 Satin 64mm (2 1 /2 ) 202-51 Brass Effect 76mm (3 ) 302-31 Satin 76mm (3 ) 302-51 The above products are also available Clam-Packed. Rebated Brass Effect 64mm (2 1 /2 ) 217-32 Satin 64mm (2 1 /2 ) 217-52 Spare Keys Cut key 509-56 Key blank 609-56 Rebate Sets Brass Effect 12.7mm ( 1 /2 ) Rebate 434-31 Satin 12.7mm ( 1 /2 ) Rebate 434-51 Brass Effect 25.4mm (1 ) Rebate 435-31 Satin 25.4mm (1 ) Rebate 435-51 Rebate Sets Brass Effect 12.7mm ( 1 /2 ) Rebate 436-31 Satin12.7mm ( 1 /2 ) Rebate 436-51 Brass Effect 25.4mm (1 ) Rebate 4-31 Satin 25.4mm (1 ) Rebate 4-51 5 Lever 5 Lever 14 14 180 55 18 57 27 96 87 168 87 108 162 40 30 21 19 All dimensions in mm. Numbers in brackets relate to 3 version of lock
2 AND 3 LEVER MORTICE LOCKS The ERA Range of 2 and 3 Lever Mortice Locks are low cost and offer added security for internal doors and outside applications such as sheds. The 2 Lever is available in 2 1/ 2 and 3, in both brass effect and satin finishes. The numbered steel keys are supplied with over 36 variations. The 3 Lever Locks are available as or, 2 1/ 2 and 3, in both brass effect and satin finishes. Two numbered steel keys are supplied with over 100 variations. Both the 2 and 3 Lever s have easily reversible bolts. 2 Lever Brass Effect 64mm (2 1/ 2 ) 468-31 Brass Effect 76mm (3 ) 568-31 DEADLOCK 3 Lever Brass Effect 64mm (2 1/ 2 ) 472-31 Satin 64mm (2 1/ 2 ) 472-51 Brass Effect 76mm (3 ) 572-31 3 Lever Brass Effect 64mm (2 1/ 2 ) 473-31 Satin 64mm (2 1/ 2 ) 473-51 Brass Effect 76mm (3 ) 573-31 Satin 76mm (3 ) 573-51 The above products are also available Clam-Packed. Spare steel key blank Note: Order according to key differ number. C01:C15-S01:S50 605-56LH C16:C30-S51:S100 605-56RH D01:D20 606-56LH D21:D40 606-56RH SASHLOCK 3 Lever 2 and 3 Lever All dimensions in mm. Numbers in brackets relate to 3 version of lock
Cat 2 3/12/09 11:51 Page 10 REBATED & BATHROOM DOOR LOCKS The ERA Rebated Door Lock is ideally suited for 13mm (1/2 ) Rebated French Doors. Available in both brass effect and satin finish, the Rebated Door Lock features a reversible forend and sashbolt allowing fixing to both left or right hinged, inward or outward opening doors. The 2 Lever Rebated Door Lock is supplied with 2 cut keys. The ERA Bathroom Door Lock has been specially designed for bathroom doors. Available in both brass and satin finish, the Bathroom Lock features a deadbolt which is operated by a thumb turn handle. The latch bolt can be easily reversed, fitting both left or right hinged inward or outward opening doors. Rebated Door Lock REBATED DOOR LOCK Brass Effect 64mm (21/2 ) Satin 64mm (21/2 ) 287-31 287-51 Brass Effect 76mm (3 ) 387-31 Satin 76mm (3 ) 387-51 Bathroom Door Lock Brass Effect 64mm (21/2 ) 243-31 Satin 64mm (21/2 ) 243-51 Brass Effect 76mm (3 ) 343-31 Satin 76mm (3 ) 343-51 Rounded forends and keeps available please contact for more information. The above products are also available Clam-Packed. BATHROOM DOOR LOCK Rebated Door Lock Bathroom Door Lock All dimensions in mm. Numbers in brackets relate to 3 version of lock. 19
Cat 2 3/12/09 11:51 Page 11 GARAGE DOOR LOCK The ERA Garage Door Lock offers extra security to metal canopy style garage doors. Each pack contains two locks, one for each side of the door. They are lockable from both inside and outside with one key operating both locks. Garage Door Locks Brass 76mm (3 ) 318-32 Garage Door Lock 14 56 77 30 87 20 180 All dimensions in mm.