City and Guilds: Permitted Reference Materials (Electrotech) Version 2.3 (October 2013) Qualification Unit/Paper Title Description Permitted Reference *Calculator Materials Allowed? 2330 201-203, Level 2 Certificate in Electro-technical Technology 205,207, 209,211, 213,215 2330 301 Application of Health and Safety and Electrical Principles 2330 302 Installation (Building and Structures): Inspection, Testing and Commissioning written BS 7671 On-site guide 2330 303 Installation (Buildings and Structures): Fault Diagnosis and Rectification written BS 7671 On-site guide 2330 304-311 Specialism units written 2357 301 Level 3 Understanding Health and Safety legislation, practices and procedures (Installing and maintaining electrotechnical systems and equipment) books 2357 302 Level 3 Understanding environmental legislation, working practices and the principles of environmental technology systems 2357 303 Level 3 Understanding the practices and procedures for overseeing and organising the work environment (Electrical Installation) books books
2357 304 Level 3 Understanding the principles of planning and selection for the installation of electrotechnical equipment and systems in buildings, structures and the environment 2357 305 Level 3 Understanding the practices and procedures for the preparation and installation of wiring systems and electrotechnical equipment in buildings, structures and the environment 2357 305 Level 3 Understanding the practices and procedures for the preparation and installation of wiring systems and electrotechnical equipment in buildings, structures and the environment 2357 306 Level 3 Understanding the principles, practices and legislation for the termination and connection of conductors, cables and cords in electrical systems 2357 306 Level 3 Understanding the principles, practices and legislation for the termination and connection of conductors, cables and cords in electrical systems books books BS 7671 Task A written Practical Task Any relevant resource material, eg. BS 7671, IET On-site Guide, IET, GN3. 2357 307 Level 3 Understanding principles, practices and legislation for the inspection, testing, commissioning and certification of electrotechnical systems and equipment in buildings, structures and the environment Practical Task books Any relevant resource material, eg. BS 7671, IET On-site Guide, IET, GN3.
2357 308 Level 3 Understanding the principles, practices and legislation for diagnosing and correcting electrical faults in electrotechnical systems and equipment in buildings, structures and the environment 2357 309 Level 3 Understanding the electrical principles associated with the design, building, installation and maintenance of electrical equipment and systems 2357 309 Level 3 Understanding the electrical principles associated with the design, building, installation and maintenance of electrical equipment and systems 2357 321 Level 3 Understanding the practices and procedures for overseeing and organising the work environment (Electrical Maintenance) 2357 322 Level 3 Understand the practices and procedures for planning and preparing to maintain electrotechnical systems and equipment 2357 323 Level 3 Understanding the practices and procedures for maintaining electrotechnical systems and equipment Practical Task Any relevant resource material, eg. BS 7671, IET On-site Guide, IET, GN3. Written Task A & B assignments Task C written 2357 305, 306, Safe isolation procedures. This task will only require one assessment Task G (common Partially restricted. See 307, 308 in whichever unit is assessed first. task) assignment guide. 2365 201 Level 2 Health and Safety in Building Services Engineering Practical tasks As defined by individual task 2365 501 Level 2 Health and Safety in Building Services Engineering
2365 202 Level 2 Principles of Electrical Science 2365 203 Level 2 Electrical Installations Technology IET On-site Guide 2365 204 Level 2 Installation of wiring systems and enclosures Task A Short answer questions 2365 204 Level 2 Installation of wiring systems and enclosures Task B practical Any relevant resources such as IET On-site guide, BS 7671 2365 204 Level 2 Installation of wiring systems and enclosures Task D - Practical Any relevant material such as BS 7671, IET On-site Guide, IET GN3 2365 204 Level 2 Installation of wiring systems and enclosures Common Task Partially restricted. See assignment guide 2365 210 Level 2 Understand how to communicate with others within building services engineering 2365 301 Level 3 Understand the fundamental principles and requirements of environmental technology systems 2365 302 Level 3 Principles of Electrical Science Written 2365 302 Level 3 Principles of Electrical Science Practical task 2365 303 Level 3 Electrical installations: fault diagnosis and rectification Practical Task C Any relevant material such as BS 7671, IET GN3 2365 303 Level 3 Electrical installations: fault diagnosis and rectification Common Task Partially restricted. See assignment guide. 2365 303 Level 3 Electrical installations: fault diagnosis and rectification Assignments Tasks A and B 2365 304 Level 3 Electrical Installations: Inspection, Testing and Practical Task C Any relevant material such Commissioning as BS 7671, IET GN3 2365 304 Level 3 Electrical Installations: Inspection, Testing and Common Task Partially restricted. See Commissioning 2365 304 Level 3 Electrical Installations: Inspection, Testing and Commissioning Assignments Tasks A and B assignment guide.
2365 305 Level 3 Electrical Systems Design Assignments Tasks A and B 2365 305 Level 3 Electrical Systems Design Task C BS 7671, IET On-site Guide 2365 308 Level 3 Career awareness in building services engineering Written 2365 308 Level 3 Career awareness in building services engineering Assignment Task A 2365 308 Level 3 Career awareness in building services engineering Assignment Task B Access to a computer and internet 2377 100 Management of Electrical Maintenance Based on the IEE Code of Practice for In-Service Inspection and Testing of Electrical 2377 101 Level 3 In-Service Inspection and Testing of Electrical (PAT) 2377 102 Level 3 In Service Inspection and Testing of Electrical (PAT) (Practical) 2377 201 Level 3 Management requirements for the maintenance of electrical equipment IET Code of Practice for Inservice Inspection and Testing of Electrical IET Code of Practice for Inservice Inspection and Testing of Electrical Assignment IET Code of Practice for Inservice Inspection and Testing of Electrical IET Code of Practice for Inservice Inspection and Testing of Electrical BS 7671 2382 101 Understand the requirements of BS7671:2008 (2011) and its application to electrical installations 2392 101 Fundamental Initial verification of Electrical Installations
2392 102 Fundamental Initial verification of Electrical Installations Practical Any relevant resources such as IET GN3, IET On-site Guide, BS 7671 2393 101 Level 3 Certificate In The Building Regulations For Electrical Installation Contractors In Dwellings 2394 301 Level 3 Principles, Practices and Legislation for the Initial Verification of Electrical Installations 2394 302 Level 3 Principles, Practices and Legislation for the Initial Verification of Electrical Installations 2394 303 Level 3 Principles, Practices and Legislation for the Initial Verification of Electrical Installations 2394 303 Level 3 Principles, Practices and Legislation for the Initial Verification of Electrical Installations 2395 301 Level 3 Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations 2395 302 Level 3 Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations 2395 303 Level 3 Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations IET guide to Part P of the Building Regulations and NICEIC Electrical Installer s Guide to the Building Regulations Written Practical Tasks, B, Any relevant material such C and D as BS 7671, IET GN3 Task A Written Practical-Task B Any relevant material such as BS 7671, IET GN3 2395 303 Level 3 Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations 2396 401 Level 4 Design, construction management and initial verification of electrical installations 2396 402 Level 4 Design, construction management and initial verification of electrical installations Task A Practical Written Any relevant resource material, such as BS 7671, GN1, GN3, IET On-site guide and other relevant documents. BS 7671, IET GN3, IET Onsite Guide
2919 301/2 Level 3 Understand and apply selection, installation and commissioning of electric vehicle charging equipment in domestic, commercial and industrial locations 2919 602 Level 3 Understand and apply selection, installation and commissioning of electric vehicle charging equipment in domestic locations 2397 501 Understand and Apply Health and Safety legislation, practices and procedures(electrical Installations in Dwellings) 2397 502 Understanding and applying environmental legislation, working practices and the principles of environmental technology systems associated with Electrical Installations in Dwellings 2397 503 Understanding and apply the practices and procedures for overseeing and organising the work environment when installing electrical installations in dwellings Practical IET Code of Practice for Electric Vehicle Charging Installation IET Code of Practice for Electric Vehicle Charging Installation none none none 2397 304 Electrotechnical Occupational Competence: Electrical Installations In Dwellings Practical BS 7671, IET GN3, IET Onsite Guide 2397 505 Understanding and applying the principles, practices and procedures for the planning, preparation and selection of wiring systems and electrotechnical equipment in dwellings Written BS 7671, IET On-site Guide, with IET Guide to the Building Regulations 2397 507 Understanding and applying the practices and procedures for the installation and connection of wiring systems and electrotechnical equipment in dwellings BS 7671, IET On-site Guide, with IET Guide to the Building Regulations 2397 508 Understanding and apply the principles, practices and legislation for the inspection, testing, commissioning and certification of electrical installations in dwellings none
2397 506 Understanding and applying the principles, practices and legislation for diagnosing and correcting electrical faults in electrical installations in dwellings none 2397 306, 307, 308 Safe isolation procedures. This task will only require one assessment in whichever unit is assessed first. Common Task Partially restricted. See assignment guide. *Where a calculator is permitted above, a scientific calculator may be used (graphical and programmable calculators are not permitted). AEEU Guide to Good Electrical Practice is a recognised alternative to IET On-Site Guide All publications permitted must not include any additional sheets or printed documents with the exception of published corrigenda or amendments. IET wiring regulations books taken into examinations can contain the following: Bookmarks (eg blank post-it notes, post-it notes numbered to indicate chapters or corners of pages folded) Highlighting of text The Corrigendum, issued by the IET as a supplement to the wiring regulations in 2013. IET wiring regulations books taken into exams cannot contain the following: Sample exam questions, answers or diagrams Any writing in the regulations or accompanying written notes Notes, diagrams or any content that may in anyway advantage the candidate in answering questions within the exam. It is the responsibility of the centre to ensure the material in the candidate's IET Requirements to Electrical Installations cannot unfairly advantage candidates in any way. If there is any doubt over the suitability of content the publication should not be used and replaced with 'clean' regulations. Many centres may find it easier to continue using 'clean' regulations.