Finger Joint Pine F o r t h e L o v e o f P a i n t e d Wo o d, F J P i n e i s t h e E c o n o m i c a l C h o i c e FINGER JOINT PINE
STANDARD MOULDINGS :: FINGER JOINT PINE Finger Joint Pine Finger-Joint (FJ) Pine consists of small pieces of wood that are recycled and jointed together to create lengths for door casings and 16 or 17 lengths for crowns, base and chair rails. This allows for ease of installation and less installation joints, typical of solid woods. The advantages to FJ Pine mouldings are the definition of detail, much sharper than MDF, the workability, nailing ease and personal preference for wood. FJ Pine can have some imperfections. Due to FJ production including many different species of pine from around the globe, this product can have raised grain, thus lacking the smoothness of other species. Close inspection prior to installation and painting is key. All FJ & Primed FJ mouldings have trimbacks. Trimbacks occur during manufacturing. The moulding comes through the molder at the correct length ordered, but a defect is spotted. Rather than throw the whole piece of moulding away, the defect is cut out, leaving varied lengths. Trimbacks (lengths other than those ordered) should not exceed 10% of the footage ordered. SECTION CONTENTS Apron...86 Astragal...85 Base and Shoe...72 Casing...67 Chair Rail...84 Cleat...85 Cove...84 Crown...79 Exterior Mold...86 Full Round...84 Hook...85 Quarter Round...84 Panel...84 S4S...86 Stool...86 Stop...79 T&G Wainscot...85 Points of Distinction Long Lengths Standard with Trimbacks All Styles In-stock Cost Effective
101A 1/2 x 1-5/8 Flat S/L Casing 1-1/2 TO 2-1/2 Lengths Available in Casing Widths (3 or under): 7, 14, 17 102A 5/8 x 1-5/8 Flat S/L Casing CASING STANDARD MOULDINGS :: FINGER JOINT PINE 103A 11/16 x 2-1/4 Flat S/L Casing 107A 5/8 x 1-5/8 711 Casing 67 108A 5/8 x 2-1/2 711 Casing 121A 11/16 x 2 Clamshell Casing 151A 9/16 x 1-1/2 Pre-Fit Casing 152A 11/16 x 2-1/4 #356 Casing 153A 9/16 x 2 #356 Casing 162A 11/16 x 2-1/4 #366 Casing
STANDARD MOULDINGS :: FINGER JOINT PINE 110A CASING 5/8 x 2-1/2 3 Step Casing 2-1/2 Lengths Available in Casing Widths (3 or under): 7, 14, 17 115A 5/8 x 2-1/2 Universal Casing 150A 5/8 x 2-1/2 Cape Cod Casing 157A 1-1/4 x 2-1/2 Coronado Casing 68 159A 1 x 2-1/2 Hermosa Casing 162B 11/16 x 2-1/2 #366 Casing 163A 5/8 x 2-1/2 Monterey Casing 164A 1-1/4 x 2-1/2 Bell Court Casing
119A 11/16 x 2-7/8 Colonial Casing 2-1/2 TO 3 Lengths Available in Casing Widths (3 or under): 7, 14, 17 CASING STANDARD MOULDINGS :: FINGER JOINT PINE 128A 11/16 x 2-7/8 Bel-Air Casing 69 167A 1-3/16 x 2-7/8 Palos Verdes Casing 165A 5/8 x 3 #275 Casing 169A 11/16 x 2-1/2 Tudor Casing
STANDARD MOULDINGS :: FINGER JOINT PINE CASING 126A 11/16 x 3-1/4 Crescent Casing Lengths Available: 17 + Trimbacks 3-1/4 TO 3-1/2 117A 9/16 x 3-1/2 Colonial Casing 154A 1/2 x 3-1/4 3 Fluted Casing Lengths Available: 14 and 16 + Trimbacks 70 158A 1/2 x 3-1/2 5 Fluted Casing Lengths Available: 14 and 16 + Trimbacks 161A 11/16 x 3-1/4 Cambridge Casing Lengths Available: 17 + Trimbacks 170A 1 x 3-1/4 Tudor Casing Lengths Available: 17 + Trimbacks
155A 3-1/4 TO 5-1/2 11/16 x 3-1/2 Cape Cod Casing Available in 17 only + Trimbacks 118A 9/16 x 4-1/4 Colonial Casing CASING STANDARD MOULDINGS :: FINGER JOINT PINE 156A 11/16 x 3-1/2 Chesapeake Casing Available in 17 only + Trimbacks 71 160A 1-1/4 x 3-1/4 Hermosa Casing Available in 17 only + Trimbacks 166A 1 x 3-1/2 Crescent Casing Available in 17 only + Trimbacks 172A 1/2 x 5-1/2 4 Flute Casing Available in 7 and 16 + Trimbacks
STANDARD MOULDINGS :: FINGER JOINT PINE 300A 300S BASE 3/8 x 3/4 Shoe 3/8 x 3/4 Solid Blue Stain Shoe (subject to availability) 3/4 TO 2-1/2 304A 3/8 x 2-1/4 S/L Base 301A 7/16 x 1-1/2 Flat Base 72 305A 7/16 x 2-1/2 S/L Base 310A 7/16 x 2-1/2 711 Base 310B 5/8 x 2-1/2 711 Base 312A 7/16 x 2-1/2 3 Step Base
2-1/2 TO 3-1/2 BASE STANDARD MOULDINGS :: FINGER JOINT PINE 319A 1/2 x 2-1/2 #356 Base 314A 9/16 x 3-1/4 #623 Base 320A 1/2 x 3-1/4 #356 Base 73 324A 9/16 x 3-3/8 Hermosa Base 322A 1/2 x 3-1/2 3 Step Base 327A 1 x 3-1/2 Palos Verdes Base
STANDARD MOULDINGS :: FINGER JOINT PINE BASE 3-7/16 TO 4-1/4 117A 9/16 x 3-1/2 Colonial Base 307A 7/16 x 3-1/2 Streamline Base 74 316A 7/16 x 4-1/4 Monterey Base 311A 7/16 x 3-1/2 711 Base 339A 9/16 x 3-7/16 Crescent Base
4 TO 4-1/2 BASE STANDARD MOULDINGS :: FINGER JOINT PINE 75 321A 1/2 x 4-1/2 3 Step Base 318A 9/16 x 4 Cape Cod Base 325A 9/16 x 4-1/4 #175 Base
STANDARD MOULDINGS :: FINGER JOINT PINE BASE 4-1/4 TO 5-1/4 76 118A 9/16 x 4-1/4 Colonial Base 326A 11/16 x 4-1/4 Crescent Base 315A 9/16 x 5-1/4 #618 Base
5 TO 5-1/4 BASE STANDARD MOULDINGS :: FINGER JOINT PINE 77 318B 9/16 x 5-1/4 B Cape Cod Base 317A 9/16 x 5-1/4 Crescent Base 323A 9/16 x 5 Hermosa Base
STANDARD MOULDINGS :: FINGER JOINT PINE BASE 5-1/4 78 328A 9/16 x 5-1/4 Colonial Base 365A 5/8 x 5-1/4 Lancaster Base 338A 9/16 x 5-1/4 #175 Base
206A 1/2 x 1-1/4 1RE Stop 202A 3/8 x 1-1/4 2RE Stop 209A STOP Lengths Available: 3, 7, 14, 16 + Trimbacks 1/2 x 1-1/2 1 RE Stop STANDARD MOULDINGS :: FINGER JOINT PINE 210A 1/2 x 1-3/4 Ogee Stop 211A 1/2 x 1-1/2 Vinyl Stop 2-1/4 TO 3-3/8 CROWN & CORNICE 1-3/8 1-3/4 79 1-7/8 401A 9/16 x 2-1/4 Colonial Crown 2-11/16 1-3/4 1-3/4 402A 11/16 x 2-1/2 Cornice 405A 9/16 x 3-3/8 Colonial Crown
STANDARD MOULDINGS :: FINGER JOINT PINE CROWN & CORNICE 3-3/8 2-3/4 3-1/4 TO 4-1/2 2-5/8 2-3/8 406A 9/16 x 4-3/8 Colonial Crown 411A 1-1/4 x 3-9/16 Cornice 3 80 2-7/8 1-7/8 2-5/8 412A 11/16 x 4-1/4 Georgian Crown 413A 11/16 x 3-1/4 Bed Mold
3-1/4 3-3/8 4-5/8 TO 5-7/8 409A FJ CORNICE 4-1/8 4-1/4 CROWN & CORNICE STANDARD MOULDINGS :: FINGER JOINT PINE 409A 11/16 x 4-5/8 Cornice 3-3/4 3-11/16 81 408A 1-1/4 x 5-7/8 Cornice 414A 9/16 x 5-1/4 Colonial Crown
STANDARD MOULDINGS :: FINGER JOINT PINE CROWN & CORNICE 4-3/8 3-5/16 3-3/4 TO 5-1/2 82 CM73A 3/4 x 5-1/2 Dentil Crown 4-3/8 3-5/16 CM74A 3/4 x 3-3/4 Dentil Crown
3-1/2 4-1/2 6 CROWN & CORNICE STANDARD MOULDINGS :: FINGER JOINT PINE 83 410A 11/16 x 6 Crown Crown can be installed with the detail going up or down, as the option shown here. It s generally a matter of personal preference.
STANDARD MOULDINGS :: FINGER JOINT PINE CHAIR RAIL 651A 9/16 x 2-1/2 Chair Rail 653A 11/16 x 3 Colonial Chair Rail 649A 11/16 x 3 Bead & Belly Chair Rail PANEL Lengths Available: 16 and Trimbacks 84 605A 11/16 x 1-5/8 Panel Mold COVE & QUARTER ROUND 620A 3/4 x 1-1/2 Rabt Panel Cap with 3/8 Rabt FULL ROUND 504A 11/16 x 11/16 Quarter Round Lengths Available: 16 and Trimbacks 523A 11/16 x 11/16 Cove Lengths Available: 14 and 16 802A 1-1/4 Full Round
2000 M 2000A 3/8 x 3-3/8 Beaded T&G Wainscot 2001A 3/8 x 3-3/8 Flat T&G Wainscot T&G WAINSCOT Lengths Available: 16 and Trimbacks ASTRAGAL STANDARD MOULDINGS :: FINGER JOINT PINE 660A 11/16 x 1-5/8 Flat Astragal Lengths Available: 7, 8 16 85 661A 1-1/4 x 2-1/4 T-Astragal for 1-3/4 Doors Lengths Available: 7 and 8 HOOK & CLEAT Lengths Available: 16 and Trimbacks 10FJ 11/16 x 1-1/2 Cleat MH 9/16 x 3-1/4 1EE Milled Hook
STANDARD MOULDINGS :: FINGER JOINT PINE EXTERIOR MOLD Lengths Available: 7, 14, 17 953A 3/4 x 1-3/16 Stucco Unprimed PR953A Primed Stucco 612A 1-1/4 x 2 #180 Eastern Brick Unprimed PR612A Primed 180 Eastern Brick 953B 7/8 x 1-1/4 Flat Stucco Perfect for nailing 1x trim around a door or window 612B 1-1/4 x 2 #180 Eastern Brick w/key Unprimed PR612B Primed 180 Eastern Brick w/key STOOL & APRON 86 979A 11/16 x 5-1/2 Flat Stool 980A 11/16 x 4-3/4 Flat Stool 985A 11/16 x 7-1/4 Flat Stool S4S Lengths Available: 16 902A 3/8 x 1-1/2 Apron Other options for Apron are casing or base underneath a window stool. 715A 11/16 x 3-1/2 S4S (1 x 4) 750A 11/16 x 5-1/2 S4S (1 x 6) 751A 11/16 x 7-1/4 S4S (1 x 8) 753A 11/16 x 11-1/4 S4S (1 x 12)