Description: 00 Base-TX (Fast Ethernet) surface mount RJ single port (x) Tab-UP/DOWN with or without LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network Interface Cars (NIC). Features and Benefits: RoHS peak wave reflow temperature rating 2 C J0C SMT product, reduced size and low cost alternative SMT Contacts to JV series JV0 Meets IEEE 02. specification High performance for maximum EMI suppression Minimum 00Vrms isolation per IEEE 02. requirement RoHS Compliant Part No. TX RX - J0C-000NL : : Down No No No -.0 - - -0 - - -0-20 -20 00 J0C-000NL : : Down No No Yes -.0 - - -0 - - -0-20 -20 00 J0C-000NL : : Down No Yes No -.0 - - -0 - - -0-20 -20 00 J0C-000NL : : Down No Yes Yes -.0 - - -0 - - -0-20 -20 00 JV00I2NL : : Down No No Yes -.0-20 - -2-0 - -0-0 -20 00 JV0I2NL : : Down No Yes Yes -.0-20 - -2-0 - -0-0 -20 00 JV02I2NL S: : Down No Yes Yes -.0-20 - -2-0 - -0-0 -20 00 J0G2DNL : : Up G/Y Yes Yes -.0-20 - -2-0 - -0-0 -20 00 J02G0DNL S: : Up G/Y Yes No -.0-20 - -2-0 - -0-0 -20 00 J02G2DNL S: : Up G/Y Yes Yes -.0-20 - -2-0 - -0-0 -20 00 Turns Ratios J0C J0 Tab Option Up/Down LEDs L/R JX0-000NL : : Up G/Y Yes Yes -.0-20 - -2-0 - -0-0 -20 00 Notes:. LEDs Left/Right: G = green; Y = yellow. 2. Add suffix T for Tape & Reel option (e.g. J0C-000T).. Extended Temperature: -0 to C Electrical Specifications @ 2 C - Operating Temperature 0 C to +0 C BST Circuit EMI Finger Insertion Loss (db MAX) -0 Return Loss (db MIN) 00Ω (±Ω) 0 0-0 -0 Crosstalk (db MIN) 0-0 0-00 Common Mode Rejection (db MIN) -0 0-0 Hipot (Vrms MIN) @ 0 Hz MIN Part Number Mating Force (MAX) RJ Durability Test Rating Unmating Force (MAX) Durability Plug to Jack Retention (MIN) J0C/JV/J Series Ibs./2.2 kgs. Ibs./2.2 kgs. 0 Insertions 20 Ibs./9.02 kgs. USA 00 Germany 9 02 0 0 Singapore 2 99 Shanghai 2 200 China 9 Taiwan pulseelectronics.com J09.N (0/)
Part Number J0C/JV/J Series Shield RJ Material Specification Contact Material Finish Material Plating Area Solder Area Material Specification Brass 20-0µ inches thick nickel over Brass Phosphor Bronze (X)µ inches gold over 0-0µ inches nickel Tin matte finish Notes:. Connector dimensions comply with FCC part dimension requirements.. NL parts are tin matte finish over nickel. 2. MSL = Moisture Sensitivity Level rating: - (highest rating =, lowest rating =. (X) = 0 inches gold for JV and J0 platforms and inches gold for J0C platform. J0C-000NL/J0C-000NL TD+ TX+ J0C Platform Schematics J0C-000NL/J0C-000NL TD+ High Temp. Thermoplastic Housing 2 MSL Rating UL 9 V-0 TX+ 2 CABLE SIDE RD+ NC GND NOTE: Connect GND to PCB ground. 2 RX+ TD- 2 RD+ RD- NC GND* TX- RX+ RX- TD- 2 RD- TX- RX- CABLE SIDE 2 pulseelectronics.com J09.N (0/)
J0C00 JV Platform Schematics JV0 TD+ 2 TX+ TD+ 2 TX+ 2 RX+ CABLE RX- TD- RD+ RD- 0.00µ C SHIELD 2 TD- RD+ RD- TX- RX- TX- RX+ CABLE JV02 TD+ 2 TX+ 2 RX+ TD- RD+ RD- TX- RX- CABLE 0.00µ C SHIELD pulseelectronics.com J09.N (0/)
J Platform Schematics J0 J02 TD+ TX+ TD+ TX+ CABLE TD- RD+ RD- 2 TX- RX+ RX- TD- RD+ RD- 2 TX- RX+ RX- CABLE 9 N/C 9 0 0.00µ C 0 0.00µ JX0-000NL TD+ TX+ 2 TD- RD+ RD- 2 TX- RX+ RX- CABLE 9 0 0.00µ pulseelectronics.com J09.N (0/)
J0C-000NL/0NL J0C Platform Mechanicals EMI Fingers EMI Fingers pulseelectronics.com J09.N (0/)
JV Series JV Platform Mechanicals JV0XX2 Date Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are ±.00 0,2 pulseelectronics.com J09.N (0/)
J Series J Platform Mechanical J0XXGXD Date of Code Country of Origin JX0-000NL & J02G2D With EMI Tabs J0-000NL J02G2D Date of Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are ±.00 0,2 pulseelectronics.com J09.N (0/)
J0C Application Note This line of 0/00Base-TX SMT RJ X Connector Magnetics Modules has been specifically designed for the implementation of a 0Base-T and 00Base-TX transmission over data-grade unshielded twisted pair cable (UTP-, e and ). The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 0/00 solutions, thereby assuring compatibility with each transceiver. used in each module also provide 00Vrms minimum isolation, wide bandwidth with minimal attentuation and fast rise times to minimize system level jitter. The X SMT RJ connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.0 (0.00 ). The JC0 series meets the stringent open circuit inductance requirements imposed by IEEE. When an ma DC current is applied across the transformer windings, the transformer will provide at least 0µH. The transformers Note: Modules are packaged in trays, unless Tape & Reel is specified (ex: J0C-000NL for Trays and J0C-000NLT for Tape & Reel). J0C-000NL/0NL Connector PCB Layout Recommendations:. For maximum EMI suppression (electromagnetic interference). Connections between the 0/00 IC and the place the decoupling capacitors adjacent to VCC and 0Ω SMT connector should be direct (ideally no change connections. in direction) and of minimum length. 2. Connections to ground should be as short as possible. pulseelectronics.com J09.N (0/)
JV Application Note This line of 0/00Base-TX SMT RJ X Connector Magnetics Modules has been specifically designed for the implementation of a 0Base-T and 00Base-TX transmission over data-grade unshielded twisted pair cable (UTP-, e and ). The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 0/00 solutions, thereby assuring compatibility with each transceiver. The JC0 series meets the stringent open circuit inductance requirements imposed by IEEE. When an ma DC current is applied across the transformer windings, the transformer will provide at least 0µH. The transformers used in each module also provide 00Vrms minimum JV00I2 Connector isolation, wide bandwidth with minimal attentuation and fast rise times to minimize system level jitter. The X SMT RJ connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.0 (0.00 ). Note: Modules are packaged in trays, unless Tape & Reel is specified. Please add the suffix T for Tape & Reel orders (ex: JVO002T). Add the suffix NL for RoHS compliant parts (ex: JV00I2NLT for Trays and JV00I2NLT for Tape & Reel). PCB Layout Recommendations:. For maximum EMI suppression (electromagnetic interference). Connections between the 0/00 IC and the place the decoupling capacitors adjacent to VCC and 0Ω SMT connector should be direct (ideally no change connections. in direction) and of minimum length. 2. Connections to ground should be as short as possible. 9 pulseelectronics.com J09.N (0/)
J0C Series J0C Packaging Specifications Tape and Reel Specification Weight...0 grams Tape & Reel... 90/reel Tray... 0/tray Tape... x2mm Tube... 2/tube Tray Specification 0 pulseelectronics.com J09.N (0/)
JV Series JV Packaging Specifications Tape and Reel Specification Weight... grams Tape & Reel... 0/reel Tray... /tray Tape...x2mm Tray Specification pulseelectronics.com J09.N (0/)
J Series Tape and Reel Specification J Packaging Specifications Weight... grams Tape & Reel... /reel Tray... /tray Tape... x2mm Tray Specification For More Information Pulse Worldwide Headquarters 2220 World Trade Drive San Diego, CA 922 U.S.A. Tel: 00 Pulse Europe Einsteinstrasse D-0 Herrenberg Germany Tel: 9 02 0 Pulse China Headquarters B02, Shenzhen Academy of Aerospace Technology Bldg. 0th Kejinan Road High-Tech Zone Nanshan District Shenzen, PR China 0 Pulse North China Room 20/20 Super Ocean Finance Ctr. 20 Yan An Road West Shanghai 200 China Pulse South Asia Joo Seng Road #0-02 PM Industrial Bldg. Singapore Tel: 2 99 Fax: 2 99 Pulse North Asia F, No. 9 Zhongyuan Road Zhongli City Taoyuan County 20 Taiwan R. O. C. Tel: Fax: 2 (Pulse) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 20. Pulse Electronics, Inc. All rights reserved. 2 pulseelectronics.com J09.N (0/)