y signal conditioned low transducer FEATURES Pressure ranges from 0...±.5 inh O (0...±6. cm H O) to -0... cm H O 1...6 output Output riometric to supply voltage Precision temperure compensed and calibred EMC-proof SERICE Non-corrosive, non-ionic working fluids, such as dry air and dry gases SPECIFICATIONS Maximum rings ELECTRICAL CONNECTION Excition voltage 7...16 Output current Source Sink 1 5 ma +s 7 to 16 (NOM 8.00 ) Output load capacitance Temperure limits Storage Compensed nf -5 to +85 C -0 to +15 C -18 to +6 C 160PC...-PCB out -s Humidity (non-condensing) 0-95 %RH Proof 1 50 mbar 1/6
y signal conditioned low transducer 161PC01D-PCB PERFORMANCE CHARACTERISTICS (unless otherwise noted, S = 8.00, R L = 5 C) 0-1. 0 psid offset 5. 0 6. effects (-18 to +6 C) Offset ±0.15 7 to 8 and 8 to 9 9 to 1 ±. 0 0. EN60-- grade, 80 to 00 MHz, 80 % AMC (1 KHz) / m 16PC01D-PCB PERFORMANCE CHARACTERISTICS (unless otherwise noted, S = 8.00, R L = 5 C) 0 1. 0 psid offset 5.00 6. effects (-18 to +6 C) Offset ±0.15 7 to 8 and 8 to 9 9 to 1 ±. 0 0. EN60-- grade, 80 to 00 MHz, 80 % AMC (1 KHz) / m /6
y signal conditioned low transducer 16PC01D6-PCB PERFORMANCE CHARACTERISTICS (unless otherwise noted, S = 8.00, R L = 5 C) -5 + 5 inh offset.5.50.55 Output voltage -5" H O 0.80 1.0 +5"H O 6. ±0.5 7 to 8 and 8 to 9 9 to 1 ±. 0 O 0. EN60-- grade, 80 to 00 MHz, 80 % AMC (1 KHz) / m 16PC01D7-PCB PERFORMANCE CHARACTERISTICS (unless otherwise noted, S = 8.00, R L = 5 C) 0 inh offset 5. 0 6. ±0.5 7 to 8 and 8 to 9 9 to 1 ±. 0 O 0. EN60-- grade, 80 to 00 MHz, 80 % AMC (1 KHz) / m /6
y signal conditioned low transducer 16PC01D75-PCB PERFORMANCE CHARACTERISTICS (unless otherwise noted, S = 8.00, R L = 5 C) -. 5 +. 5 inh offset.5.50.55 Output -.5" H O 0.80 1.0 +.5"H O 6. ±1.5 ±1.5 ±1.5 ±0.5 7 to 8 and 8 to 9 9 to 1 ±. 0 O 0. EN60-- grade, 80 to 00 MHz, 80 % AMC (1 KHz) / m 16PC01D76-PCB PERFORMANCE CHARACTERISTICS (unless otherwise noted, S = 8.00, R L = 5 C) 0 5 inh offset 5. 0 6. ±1.5 ±1.5 ±1.5 ±0.5 7 to 8 and 8 to 9 9 to 1 ±. 0 O 0. EN60-- grade, 80 to 00 MHz, 80 % AMC (1 KHz) / m /6
y signal conditioned low transducer 16PC01D8-PCB PERFORMANCE CHARACTERISTICS (unless otherwise noted, S =.00, R L = 5 C) -0 cm H offset 1.59 1.7 1.89 Output -0 cm H O cm H O 5.8 5.97 6.1 ±0.15 9 to and to 11 7 to and 11 to 1 ±. 0 O 0. EN60-- grade, 80 to 00 MHz, 80 % AMC (1 KHz) / m Specificion notes: 1.... Proof is the maximum which may be applied without causing damage to the sensing element. Non-linearity - the maximum deviion of measured output constant temperure, from "Best Straight Line" through three points (offset, full scale and 1/ full scale ). effects tested and guaranteed in the specified temperure ranges relive to 5 C. All specificions shown are relive to 5 C. is the algebraic difference between lowest and highest specified. 5/6
y signal conditioned low transducer OUTLINE DRAWING 0.0 port A (high ) 1.0 1.5 59.8 5. 18..7 terminals 0.56 diam. x 5.08 typ.,.8 diam..7 1. diam. x mounting holes NOM 6.0 1.6 mass: 0 g pin connection dimensions in mm 1 +s -s out ORDERING INFORMATION Part number 0...-1 psid 161PC01D-PCB 0...+1 psid 16PC01D-PCB -5...+5 inh 16PC01D6-PCB 0...+ inh 16PC01D7-PCB -.5...+.5 inh 16PC01D75-PCB 0...+5 inh 16PC01D76-PCB -0...+ cm H 16PC01D8-PCB Custom calibrions are widely available. Please contact First Sensor. First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the applicion or use of any product or circuit described herein, neither does it convey any license under its pent rights nor the rights of others. 6/6