T800 Series II Conventional Equipment. Reference Guide M800RACK

T800 Series II Conventional Equipment Reference Guide M800RACK-00-00

M800RACK-00-00 Index Section : Section : Section : Section 4: Section 5: Section 6: Section 7: Section 8: Introduction Guide to the Conventional T800 Equipment Questionnaire Conventional T800 Equipment Questionnaire Order Number System Rack and Function Cross-Reference Chart Rack Components Weights Rack Configurations Rack Options Guide Assemblies Rack Backplanes Personality Boards Ancillary Modules Modules Copyright TEL 0/8/99

T800 Series II Conventional Equipment Reference Guide Introduction

M800RACK-00-00 Section T800 Conventional Equipment This publication contains relevant reference information for Tait s T800 Conventional product range. It will be updated as equipment is modified or new features are introduced. It is intended to show only standard options. There is provision to mix & match up to seven modules in a rack to produce combinations for customised solutions. Tait System Solutions are open-ended. As well as information about the equipment there is also an order form and detailed instructions on how to fill in the order form. If you cannot find a solution, Please contact RSD Custom Solutions. Contact Details Chris Quinlivan Alex Brunton Alana Mehrtens Conventional Systems Manager Systems Consultant Technical Illustrator 55 Wairakei Rd PO Box 645 Christchurch New Zealand Telephone: (64) () 5899 Facsimile: (64) () 58 85 E-mail: conventional.system@tait.co.nz Copyright TEL 0/8/99

M800RACK-00-00 Section Document Control The initial release of this guide will be a hard copy delivered to Customer Service Organisations and other relevant people within the Tait organisation. In the interests of improving the performance, reliability or servicing of the equipment, Tait Electronics Limited reserve the right to update the equipment or this document or both without prior notice. The Master copy will be available on the Tait Electronics Ltd Customer Service web site. Changes will be notified to all document holders who will be responsible for updating these changes from the web site. Copyright TEL 0/8/99

Guide and Purpose of Filling out Conventional T800 Equipment Questionnaire The purpose of this questionnaire is to assist the staff of RSD to get as much information as possible from you at the start of your enquires or order request for equipment that is to be SET-UP BY RSD. The accurate completion of this form will speed up processing time and ensure delivery of the correct equipment. PART 0. (WHAT IS REQUIRED) This is to immediately identify the quantity and what sort of configuration or equipment is required. PART 0. (FREQUENCY BAND REQUIRED This is to indicate which frequency band the equipment is required to operate in. It also gives the equipment type required.( for Series I the last four digits are not needed). In some cases there will be a need for Transmitter and to be in different bands; this will not affect the Rackframe required. ENSURE EQUIPMENT STATED IS TYPE APPROVED FOR COUNTRY OF USE. PART 0. (DO YOU KNOW WHAT IS REQUIRED) The completion of this section in full is not always essential but the more information you provide will assist the Technician in correctly configuring the Rackframe to your requirements. SPEAKER PANELS ARE FITTED AS STANDARD WHERE APPROPIATE In the Rackframe line for part number you may put the code for the configuration required, these codes can be found in the T800 Series II Conventional Equipment Reference Guide, Section. If you do not have an RSD code, you may enter either the high T number, if known. These are also in the Reference Guide, Section, or enter do not know and leave the selection of Rackframe to RSD who will select the appropriate configured Rackframe to meet your requirements, based on the rest of the information provided in this section. T800questV6.doc : Issued 5 Aug 999 Page of

For the rest of the requirements you may tick the appropriate YES box for the module that you would like to be fitted into the Rackframe, remembering there is only sufficient room to fit 7 x 60mm modules. Doing this will help RSD ensure that if a Rackframe has been mentioned it can support your requirements. If no standard Rackframe exists that will fulfil your needs, then RSD will engineer a configuration to satisfy your requirements. PART 04 (EQUIPMENT TYPE REQUIRED) This is to indicate the preferred type of equipment you require, remembering that eventually all types will be Series II. Ensure type ordered are Type Approved for Country of use. PART 05 (DO YOU KNOW THE FREQUENCIES) This information can be helpful as sometimes the auxiliary equipment can be frequency dependant, ie; Duplexer/Splitters, etc.. PART 06 (AUXILLIARY EQUIPMENT) The information provided in this section ensures that the auxiliary equipment asked for is appropriate for the frequency band that the rest of the equipment is to operate in. PART 07 (ANCILLIARY EQUIPMENT) This section is to advise RSD of the maintenance support equipment required. PART 08 (BRIEF DESCRIPTION) This section is to enable you to give RSD a quick operational requirement and provide sketches if deemed necessary on the information sheet provided. PART 09 (ADDITIONAL COMMENTS) This section is to allow you to provide any extra information you think RSD will require. T800questV6.doc : Issued 5 Aug 999 Page of

PART 0 This is to inform RSD of your required delivery DATE. PART (TRANSMITTER/EXCITER PARAMETERS) This section is to allow you to inform RSD of operational parameters for the equipment. By ticking the STANDARD box you are indicating that all parameters required are as stated in the Set-up procedure in the appropriate equipment manual, and the frequency/frequencies required are as stated in PART 05. If no frequencies are stated in Part 05 then the equipment is to be Set-up on TEST frequencies. By ticking the CUSTOMISED box you are indicating special requirements are needed. You must then fill in all the required details in the boxes below to allow RSD to set-up the equipment to those specifications and options, and to supply any other information that may be required by RSD. PART (RECEIVER PARAMETERS) Same as above. T800questV6.doc : Issued 5 Aug 999 Page of

CONVENTIONAL T800 EQUIPMENT Customer Information: Date: Customer / C.S.O From: Purchase Order Number: RSD Quote Reference: RSD Staff Responsible: This form has been devised to assist in clearly identifying the Product required, and its operational parameters if being BUILT and TESTED by RSD. DO YOU REQUIRE RACKS and MODULES? DO YOU REQUIRE MODULES ONLY? (Please continue on this page) (RSD to Set-up, Please go to PART 04) PART 0. WHAT IS REQUIRED? Base Station Portable Slimline To Operate as a Repeater Yes No TOTAL QUANTITY REQUIRED :- PART 0. FREQUENCY BAND REQUIRED? 66-88Mhz (T8n-xx-xxxx) 0-44Mhz (T86n-xx-xxxx) 440-480Mhz (T85n-xx-xxxx) 6-56Mhz T8n-xx-xxxx) 4-70Mhz (T86n-xx-xxxx) 480-50Mhz (T85n-xx-xxxx) 48-74Mhz (T8n-xx-xxxx) 0-80Mhz (T87n-xx-xxxx) 800-880Mhz (T88n-xx-xxxx) 74-5Mhz (T7n-xx ) 400-440Mhz (T85n-xx-xxxx) 870-960Mhz (T88n-xx-xxxx) ARE REQUIRED MODULES TYPE APPROVED, COUNTRY OF USE :- PART 0. DO YOU KNOW WHAT IS REQUIRED PER RACK? Description Option Required Qty Part Number Rackframe Transmitter Exciter Amplifier 50 Watts 70 / 00 Watts AC for Volts External.8V Battery Converter /, 4/, 48/ Circuit Breaker 0Amp, 0Amp or 0Amp Alarm Unit Unit Tone Remote Combiner 00W Hi Stability Osc Channel Panel 0 Channel / 00 Channel Cooling Fan Single or Double Relay-50 W Max Duplexer Tx/Rx Frequencies required Duplexer Cradle (T800-4-000) Blank Panel (6-0665-00) Speaker Panel Single/selectable T800temp.V.doc : Issued 09 Sept 999 Page of 4

Purchase Order Number: PART 04. EQUIPMENT TYPE REQUIRED :- SERIES I SERIES II PART 05. DO YOU KNOW THE FREQUENCIES AT THIS TIME? No To be advised Attached Yes Tx MHz CTCSS Hz Rx MHz CTCSS Hz Channel Panel Eprom Info To be advised Attached PART 06. AUXILLIARY EQUIPMENT :- Description OPTION REQUIRED Qty Part Number Automatic For Freq:- Mhz Changeover Unit Kit Installation Kit PART 07. ANCILLIARY EQUIPMENT :- Description Qty Part Number Cabinet Microphone Programming Software Module Extender with D Ranges(standard) Module Extender with way D Range(QS) Service Manuals PART 08. BRIEF DESCRIPTION : (Diagram / Information Sheet Attached?) Yes No PART 09. ADDITIONAL COMMENTS :- PART 0. DATE REQUIRED T800temp.V.doc : Issued 09 Sept 999 Page of 4

Purchase Order Number: PART. TRANSMITTER/EXCITER PARAMETERS :- STANDARD CUSTOMISED (As Manual) (Identify Requirements) Channel Spacing : C.T.C.S.S. :.5 khz No 0.0 khz Yes 5.0 khz Single Other khz (Freq Hz) Frequency Stability : (VHF).5 ppm Multiple.5 ppm (Pattern Required) (UHF).0 ppm Tx Time Out : External Reference Disabled Transmitter : Enabled 5 Watts (Max Time 5 mins) Duration Mins 50 Watts Tx Tail Time : (For 800MHz Max 70W) 70 Watts Disabled 00 Watts Enabled Other Watts (Max Time 5 secs) Duration Secs Number of Channels : Audio Response : Single Pre-emphasised (Freq MHz) Flat Multiple Special Modifications (Pattern Required) No Yes Level : dbm Refer to Part 08 PART. RECEIVER PARAMETERS :- STANDARD CUSTOMISED (As Manual) (Identify Requirements) Channel Spacing : C.T.C.S.S. :.5 khz No 0.0 khz Yes 5.0 khz Single Other khz (Freq Hz) Frequency Stability : (VHF).5 ppm Multiple.5 ppm (Pattern Required) (UHF).0 ppm External Reference Audio Response : Number of Channels : De-emphasised Single Flat (Freq MHz) Multiple R.S.S.I. : (UHF Equipment ly) (Pattern Required) Note:All other equipment No has RSSI as standard Yes Special Modifications Level : dbm No Yes Gating Operating Level : Refer to Part 08 T800temp.V.doc : Issued 09 Sept 999 Page of 4

SYSTEM BLOCK DIAGRAM () T800temp.V.doc : Issued 09 Sept 999 Page 4 of 4

M800RACK-00-00 Section T800SII Numbering System Conventional Rack Systems ordered from RSD using the adjacent Numbering System will be configured as follows: Rack Configuration The Racks used in these configurations are as per Section of this guide, which illustrates the factory default specifications. Each Rack is fully wired and set-up for AC or DC power supply options. (Refer to Section ). A Speaker / Programming Port Panel and all required Blank Panels and are fitted as standard to each rack as required. If the System Type is code B, a co-axial relay is fitted as standard. If any other code is used, then relays must be requested if required. Module Configuration All Rx and Ex/Tx modules are fitted with second D-ranges as Standard. ie.(t8xx-xx-000) All technical information on this Rack configuration is available from RSD. Copyright TEL 0/8/99

Excellence in Radio Communications Carrier Microphone Excellence in Radio Communications Excellence in Radio Communications Excellence in Radio Communications Order Number System 4//999 System Type Frequency Band RF Output Channel Spacing Duplexer Ancillary Options B A W D 0 0 B = R = S = P = T = D = Q = H = L = Base Station Repeater Slimline Portable Tone Remote Dual Base Quasi-Sync HSO Rack Liberty A = B = C = D = E = F = G = H = I = J = K = L = 66-88 MHz 6-56 MHz 48-74 MHz 400-440 MHz 440-480 MHz 480-560 MHz 800-880 MHz 870-960 MHz 0-44 MHz 4-70 MHz 65-85 MHz 0-80 MHz = = = 4 = (T800--XXXX) (T800--XXXX) (T800--0000) (T800-5-XXXX) (T800-7-XXXX) (T800--00X) (T800-4-XXXX) (T800-8-XXXX) (T800-56-XXXX) (T8x-xx) (T8x-x) (T8x-x) (T85x-x) (T85x-x) (T85x-x) (T88x-x) (T88x-x) (T86x-x) (T86x-x) (T86x-x) (T87x-x) 5 Watts 50 Watts 90 or 00 Watts 5 Watts N =.5 khz M = 0 khz W = 5 khz E = 50 khz A = B = D = 0 = = = 0 = = = = 4 = 5 = Slimline DC External supply No Duplexer Fitted 50 Watt Duplexer Fitted Coaxial Relay This item code is always set to (0) for Slimline configurations. If Duplexer item code is set to (), then Base/Repeater/Slimline Requirement sheet must be completed. No Ancillary Option Circuit Breaker Panel Tx/Rx Metering & Unit Multi-Channel Panel (00 CH) Multi-Channel Panel (0 CH) Alarm Module (T807-0-0000) (T808-0-0000) (T807--000) (T800-7-00XX) (T88-0-0000) (TA087-0-0000) (TA87-0) (TA6-0-0000) Example: BAWD00 Transmitter Speaker Panel Equipment list B = A = = W = D = 0 = 0 = Base Station 66-88 MHz 5 Watts 5 khz DC External supply Fitted No Duplexer Fitted No Ancillaries Fitted T85-0-000 T86-0-000 T800--0000 This set-up comes complete with all required Blank Panels and a Speaker/Programming Panel

Rack and Function Cross-Reference Chart Relevant Module T number Cross- Reference Section Module Function T8n6 - T8n7 - T8n7 - T8n7 - T8n7 - X800-9x-000y X800-9x-000y X800-9x-000y 8 8 8 Default Options shown. Refer to Sections & 7 8 7 7 7 7 8 8 8 8 8 Single system Dual system Receive only 5W Transmit 50W Transmit 00W Transmit AC External.8V DC Battery back-up Converter Circuit breaker Optional Duplexer Optional fan Optional relay Optional CH/PNL Portable T80 Remote/Alarm Link Quasi Sync Alarms (TA6) Speaker (T88) Paging Fylde TSC Interface Slimline T800 - - 0x00 T800 - - 0x06 T800 - - 0x0 T800 - - 0x T800 - - 0x T800 - - 0x4 T800 - - 0x5 T800 - - 0x6 T800 - - 0x7 T800 - - 0x0 T800 - - 0x T800 - - 0x T800 - - 0x T800 - - 0x4 T800 - - 0x00 T800 - - 0x0 T800-4 - 0x00 T800-4 - 0x0 T800-4 - 0x0 0//999

Rack and Function Cross-Reference Chart Module Function Single system Dual system Receive only 5W Transmit 50W Transmit 00W Transmit AC External.8V DC Battery back-up Converter Circuit breaker Optional Duplexer Optional fan Optional relay Optional CH/PNL Portable T80 Remote/Alarm Link Quasi Sync Alarms (TA6) Speaker (T88) Paging Fylde TSC Interface Slimline T800-5 - 0000 T800-5 - 000 T800-5 - 000 T800-7 - 0x00 T800-7 - 0x0 T800-8 - 0x00 T800-9 - 0x00 T800-9 - 0x0 T800-9 - 0x0 0//999

T800 SeriesII Rack and Module Weights Weight (kg) 0.00 Rackframe to house modules.60 to house modules 4.5 to house 4 modules 4.70 to house 5 modules 5.5 to house 6 modules 5.80 to house 7 modules 6.5 T8n5.0 T8n6 Transmitter.05 T8n7 Exciter.05 50W Amplifier.0 00W Amplifier.55 T80n.0 Circuit breaker 0.50 DC Converter Module 0.90 TA6 Alarm Unit 0.85 T88 0.95 TA807 Channel Panel 0.5 TA0 Combiner.80 Duplexer.5 Duplexer Cradle 0.55 T80 Tone Remote / Alarm.55 T80-0 High Stability Oscillator.50 Portable Repeater Case to house modules (Standard) 6.00 to house 4 modules 6.5 Batteries (Standard) 5.60 0//999

T800 Series II Conventional Equipment Reference Guide Rack Configuration

M800RACK-00-00 Section T800--0x00 A standard single channel rack for repeater or base station use; up to 00 Watt output. Operational Characteristics Single channel Up to 00W with option of Transmitter or Exciter / PA combination Speaker / Programming panel DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only x = AC and External DC x = AC and Battery x = 4 External DC and Battery x = 5 AC and External DC and Battery Configuration Options Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--000 installation kit microphone DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 5W -.5kg 50W - 4.45kg 00W - 4.80kg NOTE: This product offers the versatility of fitting personality boards to provide customised solutions for specific requirements. Refer to RSD for design and build of personality boards. Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Excellence in Radio Communications Exciter Amplifier Excellence in Radio Communications Speaker Panel Overload Standby Carrier Low forward power High reverse power Microphone FAN () TRANSMITTER BLANK DUPLEXER BLANK REAR VIEW Speaker Panel PA Exciter Output.8V 5A Max. + 4-5 T800-50-0000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD FAN () OUTPUT ONLY.8V MAX AMPS FUSE TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-45-0000 GUIDE PA 50W KIT T800-44-0000 T800 PS GUIDE KIT T800-5-0000 SPEAKER / PROGRAM PANEL SECTION 8 T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-50-0000 BACKPLANE SECTION 5 X800-90-0000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications 5 4 Drawing name changed Drawing No changed and Ref. added Parts list added AMM ABB 6//99 AMM ABB 4/8/99 AMM ABB 8//99 TITLE: RACK, SNGL<00W, (OPT BD Christchurch Change of Title AMM ABB 4//98 New Zealand Original Version AMM ABB /0/98 Drawn Checked Date DRAWING: T800--0x00 RACKFRAME

M800RACK-00-00 Section T800--0x06 A 5 Watt single channel rack for repeater or link use. Operational Characteristics Single channel Up to 5W Transmitter Output Speaker / Programming panel DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only x = AC and External DC x = AC and Battery x = 4 External DC and Battery x = 5 AC and External DC and Battery Configuration Options Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--000 installation kit Microphone DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 7.85kg NOTE: This product offers the versatility of fitting personality boards to provide customised solutions for specific requirements. Refer to RSD for design and build of personality boards. Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Excellence in Radio Communications Excellence in Radio Communications Excellence in Radio Communications Speaker Panel Transmitter Excellence in Radio Communications Carrier Microphone REAR VIEW Transmitter Speaker Panel EARTH STUD T800-50-0000 DC INPUT FUSE TB REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS OUTPUT ONLY.8V MAX AMPS ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-5-0000 SPEAKER / PROGRAM PANEL SECTION 8 T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-50-0000 BACKPLANE SECTION 5 X800-9-0000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications TITLE: RACK, REPEATER/LINK END DC Christchurch Drawing No changes and Ref. added AMM ABB 4/8/99 New Zealand Original Version AMM ABB 9//99 Drawn Checked Date DRAWING: T800--0x06

M800RACK-00-00 Section T800--0x0 A single channel repeater or base station rack based on the standard T800--0x00, with the option of fitting a Channel Panel. Operational Characteristics Single channel Up to 00W with option of Transmitter or Exciter / PA combination Speaker / Programming panel DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only x = AC and External DC x = AC and Battery x = 4 External DC and Battery x = 5 AC and External DC and Battery Configuration Options Channel Panel Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Length - mm plus 50mm clearance space Weight (rackframe with modules shown) 5W -.5kg 50W - 4.45kg 00W - 4.80kg Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Excellence in Radio Communications Exciter Amplifier Excellence in Radio Communications Speaker Panel Overload Standby Carrier Low forward power High reverse power Microphone FAN () TRANSMITTER BLANK DUPLEXER CHANNEL PANEL BLANK REAR VIEW Speaker Panel PA Exciter Output.8V 5A Max. + 4-5 T800-50-000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD FAN () OUTPUT ONLY.8V MAX AMPS FUSE TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-45-0000 GUIDE PA 50W KIT T800-44-0000 T800 PS GUIDE KIT T800-5-0000 SPEAKER / PROGRAM PANEL SECTION 8 T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-50-000 BACKPLANE CH-PNL SECTION 5 X800-90-0000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications 5 4 Drawing name changed Drg No changed and Ref added Parts list added AMM ABB 6//99 AMM ABB 5/8/99 AMM ABB 8//99 TITLE RACK, SNGL<00W, (CH PNL Christchurch Change of Title AMM ABB 4//98 New Zealand Original Version AMM ABB /0/98 Drawn Checked Date DRAWING: T800--0x0 RACKFRAME

M800RACK-00-00 Section T800--0x A only rack with alarm outputs, AC power supply and dual battery back-up connections. Operational Characteristics Receive only - up to 4 receivers Speaker / Programming panel - with Speaker Select Switch Alarm Panel DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only x = AC and External DC x = AC and Battery x = 4 External DC and Battery x = 5 AC and External DC and Battery Configuration Options Channel Panel Fans - single or double DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 7.75kg Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Speaker Panel Alarm Panel 4 5 Overload 6 Standby Speaker Select PSU Fail Batt Fail Forward Reflected Alarm# Alarm# Alarm# Alarm#4 Forward Test CHANNEL PANEL or BLANK REAR VIEW Alarm Speaker Panel Output.8V 5A Max. + 4-5 T800-50-000 T800-50-000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD FUSE DIODE PACK BATTERY BACK-UP TB OUTPUT ONLY.8V MAX AMPS ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED BATT BACK-UP T800-4-000 DOUBLE GUIDE KIT T800-4-0000 GUIDE KIT T500/00 DOUBLE 'D' T800-44-0000 T800 PS GUIDE KIT T800-5-000 SPEAKER / PROGRAM PANEL WITH 6-WAY SWITCH SECTION 8 T800-40-0000 FIXING KIT ONLY T800-50-000 BACKPLANE SECTION 5 X800-9-0000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications Christchurch 4 4 drg No changed and Ref added Frame label removed Parts list added Change of Title AMM ABB 5/8/99 AMM ABB /7/99 AMM ABB 8//99 AMM ABB 4//98 TITLE: RACK, RX ONLY AC (4RX + ALARM + SPK) New Zealand Original Version AMM ABB 0/0/98 Drawn Checked Date DRAWING: T800--0x

M800RACK-00-00 Section T800--0x Receive only rack similar to T800--0x; but with no alarm outputs. Operational Characteristics Receive only - up to 4 receivers Speaker / Programming panel - with Speaker Select Switch DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only x = AC and External DC x = AC and Battery x = 4 External DC and Battery x = 5 AC and External DC and Battery Configuration Options Channel Panel Fans - single or double DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 6.5kg Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Speaker Panel Excellence in Radio Communications 4 5 Overload 6 Standby Speaker Select CHANNEL PANEL or BLANK REAR VIEW Speaker Panel Output.8V 5A Max. + 4-5 T800-50-000 T800-50-000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD OUTPUT ONLY.8V MAX AMPS FUSE TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-44-0000 T800 PS GUIDE KIT T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-5-000 SPEAKER / PROGRAM PANEL WITH 6-WAY SWITCH SECTION 8 T800-40-0000 FIXING KIT ONLY T800-50-000 BACKPLANE SECTION 5 X800-90-0000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications drg No changed and Ref added Parts list added AMM ABB 5/8/99 AMM ABB 8//99 TITLE: RACK, RX ONLY AC (4RX + SPK) Christchurch Change of Title AMM ABB 4//98 New Zealand Original Version AMM ABB 0/0/98 Drawn Checked Date DRAWING: T800--0x

M800RACK-00-00 Section T800--0x A dual 50 Watt channel rack, with AC power supply and DC battery back-up connections. Operational Characteristics Dual channel 50W output Speaker / Programming panel DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only Not Available (see T800--0x6) x = AC and External DC x = AC and Battery x = 4 External DC and Battery Not Available (see T800--0x6) x = 5 AC and External DC and Battery Configuration Options Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown).55kg Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Amplifier Exciter Exciter Amplifier Overload Standby Low forward power Carrier Carrier Low forward power High reverse power High reverse power Microphone Microphone FAN () FAN () REAR VIEW PA Exciter Exciter PA T800-50-000 Output.8V 5A Max. + 4-5 T800-50-000 FAN () REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD FAN () DIODE PACK FUSE FUSE BATTERY BACK-UP TB OUTPUT ONLY.8V MAX AMPS The rack configuration has been changed to reduce the risk of overheating in some environments. It is recommended that the optional fans are fitted. ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800-4-0004 RACK, FRAME ONLY, ASSEMBLED BATTERY BACK-UP T800-4-000 DOUBLE GUIDE KIT T800-45-0000 GUIDE PA 50W KIT T800-44-0000 T800 PS GUIDE KIT T800-50-000 BACKPLANE SECTION 5 X800-9-000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications Drg name changed AMM ABB 9//99 TITLE: RACK, DUAL x50w Christchurch Drg No change, ref added, PS,PA moved AMM ABB 5/8/99 New Zealand Original Version AMM ABB 8//99 Drawn Checked Date DRAWING: T800--0x RACKFRAME

M800RACK-00-00 Section T800--0x4 A dual 5 Watt channel rack, with AC power supply and DC battery back-up connections. Operational Characteristics Dual channel 5W output Dual Speaker / Programming panel (switchable) DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only Not Available (see T800--0x7) x = AC and External DC x = AC and Battery x = 4 External DC and Battery Not Available (see T800--0x7) x = 5 AC and External DC and Battery Configuration Options Channel Panel Individual Speaker / Programming panels Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 6.05kg Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

O FF FRONT VIEW Excellence in Radio Communications Transmitter Speaker Panel Transmitter Overload Standby Carrier RX RX O FF Carrier Microphone Microphone SPEAKER (T800-5-0000) DUPLEXER AND/OR CHANNEL PANEL SPEAKER (T800-5-0000) DUPLEXER AND/OR CHANNEL PANEL REAR VIEW Transmitter Speaker Panel Transmitter Output.8V 5A Max. + 4-5 T800-50-000 T800-50-000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD DIODE PACK FUSE FUSE BATTERY BACK-UP TB OUTPUT ONLY.8V MAX AMPS ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800-4-0004 RACK, FRAME ONLY, ASSEMBLED, BATTERY BACK-UP T800-4-000 DOUBLE GUIDE KIT T800-44-0000 T800 PS GUIDE KIT T800-5-000 SPEAKER / PROGRAM PANEL SECTION 8 T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-40-0000 FIXING KIT ONLY T800-50-000 BACKPLANE SECTION 5 X800-9-000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications 5 4 Drg name changed Dual spk replaced by switched spk Drg No changed, ref added, PA, PS moved AMM ABB 9//99 AMM ABB /9/99 AMM ABB 5/8/99 TITLE: RACK, DUAL x5w, SPK SW Christchurch Parts list added, fans removed AMM ABB 8//99 New Zealand Original Version AMM ABB //99 Drawn Checked Date DRAWING: T800--0x4 RACKFRAME

M800RACK-00-00 Section T800--0x5 A dual 5 Watt channel rack with a separate power supply for each channel. The speaker panel can be switched between receivers. Operational Characteristics Dual channel 5W output Speaker / Programming panel, with Selectable Switch DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only x = AC and External DC x = AC and Battery x = 4 External DC and Battery x = 5 AC and External DC and Battery Configuration Options Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 6.6kg Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

O FF FRONT VIEW Transmitter Speaker Panel Transmitter Overload Overload Standby Carrier RX RX O FF Carrier Standby Microphone Microphone REAR VIEW Transmitter Speaker Panel Transmitter Output.8V 5A Max. + 4-5 T800-50-000 T800-50-000 Output.8V 5A Max. + 4-5 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD OUTPUT ONLY.8V MAX AMPS DIODE PACK FUSE FUSE TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800-4-0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-44-0000 T800 PS GUIDE KIT T800-5-000 SPEAKER/PROGRAM PANEL WITH POSITION SWITCH SECTION 8 T800-40-0000 FIXING KIT ONLY T800-50-000 BACKPLANE SECTION 5 X800--005 POWER RAIL (STANDARD) SECTION T A I T Radio Communications Drg name changed Drg No changed, Ref added, Relay removed AMM ABB 9//99 AMM ABB 5/8/99 TITLE: RACK, DUAL x5 WATT, ( P/SUP Christchurch Standard supply table added AMM ABB //99 New Zealand Original Version AMM ABB //99 Drawn Checked Date DRAWING: T800--0x5 RACKFRAME

M800RACK-00-00 Section T800--0x6 A dual 50 Watt channel rack for use in DC only situations. Operational Characteristics Dual channel 50W output per channel Speaker / Programming panel, with Selectable Switch DC line fuse Earth stud Backplane interface Options x = 0 AC only Not Available x = External DC only x = AC and External DC Not Available x = AC and Battery Not Available x = 4 External DC and Battery x = 5 AC and External DC and Battery Not Available Configuration Options Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 0.7kg Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

O FF FRONT VIEW Amplifier Exciter Speaker Panel Exciter Amplifier Low forward power Carrier RX RX O FF Carrier Low forward power High reverse power High reverse power Microphone Microphone FAN () FAN () REAR VIEW PA Exciter Speaker Panel Exciter PA EARTH STUD FAN () T800-50-000 T800-50-000 FAN () DC INPUT FUSE FUSE TB REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS OUTPUT ONLY.8V MAX AMPS The rack configuration has been changed to reduce the risk of overheating in some environments. It is recommended that the optional fans are fitted. ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-45-0000 GUIDE PA 50W KIT T800-5-000 SPEAKER/PROGRAM PANEL WITH POSITION SWITCH SECTION 8 T800-40-0000 FIXING KIT ONLY T800-50-000 BACKPLANE SECTION 5 X800-9-000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications Drg name changed AMM ABB 9//99 TITLE: RACK, DUAL x50w, (SPK SWITCHED) Christchurch Drg No changed, Ref added, PA moved AMM ABB 5/8/99 New Zealand Original Version AMM ABB 5//99 Drawn Checked Date DRAWING: T800--0x6 RACKFRAME

M800RACK-00-00 Section T800--0x7 A dual 5 Watt channel rack for use in DC only situations. Operational Characteristics Dual channel 5W output per channel Speaker / Programming panel, with Selectable Switch DC line fuse Earth stud Backplane interface Options x = 0 AC only Not Available (see T800--0x4) x = External DC only x = AC and External DC Not Available (see T800--0x4) x = AC and Battery Not Available (see T800--0x4) x = 4 External DC and Battery x = 5 AC and External DC and Battery Not Available (see T800--0x4) Configuration Options Channel Panel Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown).kg Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

O FF FRONT VIEW Excellence in Radio Communications Transmitter Speaker Panel Transmitter Excellence in Radio Communications Carrier RX RX O FF Carrier Microphone Microphone DUPLEXER and/or CHANNEL PANEL BLANK REAR VIEW DUPLEXER and/or CHANNEL PANEL Transmitter Speaker Panel Transmitter DR T800-50-000 DR T800-50-000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD DC INPUT FUSE FUSE TB OUTPUT ONLY.8V MAX AMPS ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-5-000 SPEAKER / PROGRAM PANEL -WAY SWITCH SECTION 8 T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-50-000 BACKPLANE SECTION 5 X800-9-000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications Drg name changed AMM ABB 9//99 TITLE: RACK, DUAL X5W, (SPKR SW) Christchurch Drg No changed, Ref added AMM ABB 5/8/99 New Zealand Original Version AMM ABB /6/99 Drawn Checked Date DRAWING: T800--0x7 RACKFRAME

M800RACK-00-00 Section T800--0x0 A single repeater or base station channel rack up to 00 Watt maximum output. The rack can accommodate an Rx/Tx panel and AC power input. Operational Characteristics Single channel Up to 00W with option of Transmitter or Exciter / PA combination Speaker / Programming panel Rx/Tx Panel DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only Not Available x = AC and External DC x = AC and Battery x = 4 External DC and Battery Not Available x = 5 AC and External DC and Battery Configuration Options Channel Panel Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 5W -.kg 50W - 5.95kg 00W - 6.kg NOTE: This product offers the versatility of fitting personality boards to provide customised solutions for specific requirements. Refer to RSD for design and build of personality boards. Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Rx/Tx Exciter Amplifier Excellence in Radio Communications Speaker Panel Overload Standby Carrier Low forward power High reverse power Volts Rx Signal Rx Tx Fwd Pwr Rev Pwr Microphone FAN () TRANSMITTER BLANK PANEL DUPLEXER CHANNEL PANEL REAR VIEW Speaker Panel PA Exciter Rx/Tx MON T88-0-0000 Output.8V 5A Max. + 4-5 T800-50-0000 T800-60-0000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD FAN () OUTPUT ONLY.8V MAX AMPS FUSE TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-4-000 GUIDE KIT T500/00 SINGLE 'D' T800-45-0000 GUIDE PA 50W KIT T800-44-0000 T800 PS GUIDE KIT T800-5-0000 SPEAKER / PROGRAM PANEL SECTION 8 T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-50-0000 BACKPLANE SECTION 5 T800-60-0000 PERSONALITY BOARD SECTION 6 X800-90-0000 POWER RAIL (STANDARD) SECTION T A I T Radio Communications 4 Drg name changed Drg No changed, Ref added AMM ABB 9//99 AMM ABB 5/8/99 TITLE: RACK, SNGL<00W, (MONITOR) Christchurch Parts list added AMM ABB 8//99 New Zealand Original Version AMM ABB //99 Drawn Checked Date DRAWING: T800--0x0 RACKFRAME

M800RACK-00-00 Section T800--0x A single 5 Watt repeater or base station channel rack to accommodate an Rx/Tx and rack mounted circuit breaker for protection on the DC power input. Operational Characteristics Single channel 5W output only Speaker / Programming panel Panel circuit breaker DC line fuse Earth stud Backplane interface Options x = 0 AC only Not Available x = External DC only x = AC and External DC Not Available x = AC and Battery Not Available x = 4 External DC and Battery x = 5 AC and External DC and Battery Not Available Configuration Options Channel Panel Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 0.5kg NOTE: This product offers the versatility of fitting personality boards to provide customised solutions for specific requirements. Refer to RSD for design and build of personality boards. Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Rx/Tx Transmitter Excellence in Radio Communications Excellence in Radio Communications Speaker Panel Circuit Breaker Carrier V Volts Rx Signal Rx Tx Fwd Pwr Rev Pwr Microphone 0 DUPLEXER CHANNEL PANEL REAR VIEW Circuit Breaker Speaker Panel Transmitter Rx/Tx MON T88-0-0000 T800-50-0000 T800-60-0000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD OUTPUT ONLY.8V MAX AMPS DC INPUT TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-4-000 GUIDE KIT T500/00 SINGLE 'D' T800-45-0000 GUIDE PA 50W KIT T800-5-0000 SPEAKER / PROGRAM PANEL SECTION 8 T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-7-000 PANEL CIRCUIT BREAKER WITH 0AMP SWITCH SECTION 8 T800-50-0000 BACKPLANE SECTION 5 T800-60-0000 PERSONALITY BOARD SECTION 6 6-0665-00 BLANKING FRONT PANEL ONLY SECTION 8 X800--0 POWER RAIL (STANDARD) SECTION T A I T Radio Communications 5 4 Drg name changed Drg No changed, Ref added Parts list added AMM ABB 9//99 AMM ABB 5/8/99 AMM ABB 8//99 TITLE: RACK, SNGL<5W, (MONITOR) Christchurch Change of Title AMM ABB 4//98 New Zealand Original Version AMM ABB /0/98 Drawn Checked Date DRAWING: T800--0x RACKFRAME

M800RACK-00-00 Section T800--0x A single 50 Watt repeater or base station channel rack to accommodate an Rx/Tx and rack mounted circuit breaker for protection on the DC power input. Operational Characteristics Single channel 50W output only Speaker / Programming panel Panel circuit breaker DC line fuse Earth stud Backplane interface Options x = 0 AC only Not Available x = External DC only x = AC and External DC Not Available x = AC and Battery Not Available x = 4 External DC and Battery x = 5 AC and External DC and Battery Not Available Configuration Options Channel Panel Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 4.kg NOTE: This product offers the versatility of fitting personality boards to provide customised solutions for specific requirements. Refer to RSD for design and build of personality boards. Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Rx/Tx Exciter Amplifier Excellence in Radio Communications Speaker Panel Circuit Breaker Carrier Low forward power V High reverse power Volts Rx Signal Rx Tx Fwd Pwr Rev Pwr Microphone 0 FAN () DUPLEXER CHANNEL PANEL REAR VIEW Circuit Breaker Speaker Panel PA Exciter Rx/Tx MON T88-0-0000 T800-50-0000 T800-60-0000 REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD FAN () OUTPUT ONLY.8V MAX AMPS DC INPUT TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-4-000 GUIDE KIT T500/00 SINGLE 'D' T800-45-0000 GUIDE PA 50W KIT T800-5-0000 SPEAKER / PROGRAM PANEL SECTION 8 T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / FRONT PANEL SECTION 8 T800-7-000 PANEL CIRCUIT BREAKER WITH 0AMP SWITCH SECTION 8 T800-50-0000 BACKPLANE SECTION 5 T800-60-0000 PERSONALITY BOARD SECTION 6 X800--0 POWER RAIL (STANDARD) SECTION T A I T Radio Communications 5 4 Drg name changed Drg No changed, Ref added Parts list added AMM ABB 9//99 AMM ABB 5/8/99 AMM ABB 8//99 TITLE: RACK, SNGL<=50W, (MONITOR) Christchurch Change of Title AMM ABB 4//98 New Zealand Original Version AMM ABB /0/98 Drawn Checked Date DRAWING: T800--0x RACKFRAME

M800RACK-00-00 Section T800--0x A single channel rack with 50 Watt maximum output, alarm outputs and AC power supply. Operational Characteristics Single channel Up to 50W output Speaker / Programming panel Alarm Panel DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only x = AC and External DC x = AC and Battery x = 4 External DC and Battery x = 5 AC and External DC and Battery Configuration Options Channel Panel Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 5W -.kg 50W - 5.85kg NOTE: This product offers the versatility of fitting personality boards to provide customised solutions for specific requirements. Refer to RSD for design and build of personality boards. Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Alarm Panel Exciter Amplifier Excellence in Radio Communications Speaker Panel Overload PSU Fail Carrier Low forward power Standby Batt Fail Forward High reverse power Reflected Alarm# Alarm# Microphone Alarm# Alarm#4 Forward Test FAN () TRANSMITTER BLANK DUPLEXER CH/PNL BLANK REAR VIEW Speaker Panel PA Transmitter or Exciter Alarm Output.8V 5A Max. + 4-5 T800-50-0000 T800-60-000 Personality Board REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD DIODE PACK FAN () FUSE BATTERY BACK-UP TB OUTPUT ONLY.8V MAX AMPS ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION T800-4-0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-45-0000 GUIDE PA 50W KIT T800-4-0000 GUIDE KIT T500/00 T800-44-0000 T800 PS GUIDE KIT T800-5-0000 SPEAKER/PROGRAM PANEL T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / F-PNL KIT T800-50-0000 BACKPLANE T800-60-000 PERSONALITY BOARD + CH/PNL + ALARMS (0V) X800-9-0000 POWER RAIL (STANDARD) QTY REFERENCE SECTION 8 SECTION 8 SECTION 5 SECTION 6 SECTION T A I T Radio Communications 4 Drg name changed Drg No changed, Ref added AMM ABB 9//99 AMM ABB 5/8/99 TITLE: RACK, SNGL<00W, (ALARMS 0V) Christchurch New Zealand Change personality board Original Version AMM ABB 0//99 AMM ABB 5//99 Drawn Checked Date DRAWING: T800--0x RACKFRAME

M800RACK-00-00 Section T800--0x4 A single channel rack with 50 Watt maximum output, alarm outputs (LO) and AC power supply. Operational Characteristics Single channel Up to 50W output Speaker / Programming panel Alarm Panel DC line fuse Earth stud Backplane interface Options x = 0 AC only x = External DC only x = AC and External DC x = AC and Battery x = 4 External DC and Battery x = 5 AC and External DC and Battery Configuration Options Channel Panel Duplexer Coaxial Relay Fans - single or double Interfaces to Changeover Module TA70-00-xxxx using TA70--00 installation kit microphone DC converter Mechanical Characteristics 5 Rack Units x 9 rack to house up to 7 modules Size Height - mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 5W -.kg 50W - 5.85kg NOTE: This product offers the versatility of fitting personality boards to provide customised solutions for specific requirements. Refer to RSD for design and build of personality boards. Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Alarm Panel Exciter Amplifier Excellence in Radio Communications Speaker Panel Overload PSU Fail Carrier Low forward power Standby Batt Fail Forward High reverse power Reflected Alarm# Alarm# Microphone Alarm# Alarm#4 Forward Test FAN () TRANSMITTER BLANK DUPLEXER CH/PNL BLANK REAR VIEW Speaker Panel PA Transmitter or Exciter Alarm Output.8V 5A Max. + 4-5 T800-50-0000 T800-60-000 Personality Board REFER TO SECTION OF THE REFERENCE GUIDE FOR POWER RAIL OPTIONS EARTH STUD DIODE PACK FAN () FUSE BATTERY BACK-UP TB OUTPUT ONLY.8V MAX AMPS ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION T800-4-0004 RACK, FRAME ONLY, ASSEMBLED T800-4-000 DOUBLE GUIDE KIT T800-45-0000 GUIDE PA 50W KIT T800-4-0000 GUIDE KIT T500/00 T800-44-0000 T800 PS GUIDE KIT T800-5-0000 SPEAKER/PROGRAM PANEL T800-40-0000 FIXING KIT ONLY T800-40-000 BLANKING BRACKET / F-PNL KIT T800-50-0000 BACKPLANE T800-60-000 PERSONALITY BOARD + CH/PNL + ALARMS (LO) X800-9-0000 POWER RAIL (STANDARD) QTY REFERENCE SECTION 8 SECTION 8 SECTION 5 SECTION 6 SECTION T A I T Radio Communications TITLE: RACK, SNGL<00W, (ALARMS LO) Christchurch New Zealand Drg name changed Original Version AMM ABB 9//99 AMM ABB 7/9/99 Drawn Checked Date DRAWING: T800--0x4 RACKFRAME

M800RACK-00-00 Section T800--0x00 A single channel rack with 5 Watt maximum output mounted in a RU Slimline configuration for use in DC situations. Operational Characteristics Single channel Up to 5W output Speaker / Programming Port Options x = 0 AC only Not Available (see T800--0x0) x = External DC only x = AC and External DC Not Available x = AC and Battery Not Available x = 4 External DC and Battery x = 5 AC and External DC and Battery Not Available Configuration Options Coaxial Relay Microphone Mechanical Characteristics Rack Units x 9 rack to house up to 7 modules Size Height - 89mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 5W.9kg This configuration includes and Transmitter modules. (to be specified when ordering) Copyright TEL 0/8/99

FRONT VIEW Transmitter Gate Gating Level Carrier Microphone Exciter Out T800II Slimline REAR VIEW Transmitter TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--0000 SLIMLINE ASSEMBLY KIT + CABLES T8n5-nn-nnnn RECEIVER SECTION 8 T8n6-nn-nnnn TRANSMITTER SECTION 8 T A I T Radio Communications TITLE: SLIMLINE 5W DC Christchurch New Zealand Original AMM ABB 0/9/99 Version Drawn Checked Date DRAWING: T800--0x00

M800RACK-00-00 Section T800--0x0 A single channel rack with 5 Watt maximum output mounted in a RU Slimline configuration, with an AC power supply. Operational Characteristics Single channel Up to 5W output Speaker / Programming Port Options x = 0 AC only x = External DC only Not Available (see T800--0x00) x = AC and External DC x = AC and Battery x = 4 External DC and Battery Not Available x = 5 AC and External DC and Battery Configuration Options Coaxial Relay Microphone Mechanical Characteristics Rack Units x 9 rack to house up to 7 modules Size Height - 89mm Width - 48mm Depth - mm plus 50mm clearance space Weight (rackframe with modules shown) 5W 8.55kg This configuration includes and Transmitter modules. (to be specified when ordering). Copyright TEL 0/8/99

FRONT VIEW Transmitter Gate Gating Level Carrier Microphone Exciter Out T800II Slimline REAR VIEW Transmitter TB ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T800--000 SLIMLINE ASSEMBLY KIT + CABLES + POWER SUPPLY T8n5-nn-nnnn RECEIVER SECTION 8 T8n6-nn-nnnn TRANSMITTER SECTION 8 T A I T Radio Communications TITLE: SLIMLINE 5W AC Christchurch New Zealand Original AMM ABB 0/9/99 Version Drawn Checked Date DRAWING: T800--0x0

M800RACK-00-00 Section T800-5-0000 A single 5W channel, housed in a portable case with sealed lead acid batteries. Operational Characteristics Single channel Up to 5W output DC only operation - Batteries and external DC supply input Speaker / Programming panel DC line fuse Backplane interface Battery Isolation Switch Configuration Options Channel Panel Duplexer Coaxial Relay Antenna Mechanical Characteristics Portable case to house up to 4 modules Top Mounting Duplexer Tray Size Case ly with Handles and Connectors Height - 4mm 05mm Width - 55mm 00mm Depth - 460mm 460mm Weight (rackframe with modules shown) 5.85kg CAUTION: If operating above 5 Watts, front and rear covers must be removed. Rack Items Supplied as Standard does not include modules other than those listed on the drawing. Copyright TEL 0/8/99

FRONT VIEW Transmitter Speaker Panel Carrier Microphone TALK THROUGH EXTERNAL DC BASE STATION REPEATER BATTERY OPERATION T8n5 -nn-000 T8n6 -nn-000 T800-5-0000 SPKR/PROG PNL or TA087-0-0000 00 CHANNEL CHANNEL PANEL or TA87-0-0000 0 CHANNEL CHANNEL PANEL REAR VIEW Duplexer mounted behind T800-50-000 DC OFF ON FUSE 0A ITEMS SUPPLIED AS STANDARD PART NUMBER DESCRIPTION QTY REFERENCE T99-05-000 CASE, PORTABLE REPEATER - 000 VERSION T800-4-000 DOUBLE GUIDE KIT T800-40-000 BLANK PANEL AND FIXING KIT T800-5-0000 SPEAKER / PROGRAM PANEL SECTION 8 T800-40-0000 FIXING KIT ONLY T800-50-000 BACKPLANE SECTION 5 90-0000-48 BATTERY SEALED LEAD ACID V 6.5A X800-5-0000 W800-5-0000 STANDARD LOOM ASSEMBLY WIRING LIST T800-5-0000 T A I T Radio Communications 4 Reference added Battery details added AMM ABB 6/8/99 AMM ABB 0/6/99 TITLE: T800-5-0000 PORTABLE Christchurch Diode pack alignment corrected AMM ABB /6/99 New Zealand Original Version AMM ABB 4//99 Drawn Checked Date DRAWING: T800-5-0000