Functional Hardware»» One Stop Shop for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more»» Third Party Testing on hinges and slides to meet or exceed all» ANSI/BHMA standards»» Many products certified by the KCMA and Woodwork Institute»» 5 Regional warehouses across the US ensure item availability and quick shipping/transit times»» Hardware Resources is a member of the following trade organizations: HINGES:»» Large selection to meet just about every application: Face Frame/Frameless, Compact/ European, Soft Close/Non-soft Close»» Decorative hinges and shutter hinges in industry standard finishes to compliment any installation 500 Series - 110 and 125 European Concealed Hinges 400 Series - Face Frame and Frameless Plates for 500 Series Hinges 700 Series - 110 and 125 Soft Close European Concealed Hinges 600 Series - Face Frame and Frameless Plates for 700 Series Soft Close Hinges SLIDES:»» Large selection to meet just about every application: Face Frame/Frameless, Epoxy/Side Mount/Undermount, Light Duty to Extra Heavy Duty, 3/4 Extension/Full Extension»» Best-selling series: 303FUP Series - Push to Open Full Extension Ball Bearing Drawer Slides 303FUSFT Series - Soft Close Full Extension Ball Bearing Drawer Slides 303FU Series - Heavy Duty Full Extension Ball Bearing Drawer Slides USE Series - Full Extension Soft Close Undermount Drawer Slides 5000 Series - 3/4 Extension Self Close Epoxy Drawer Slides 200
Functional Hardware Contents Cabinet Hinges Soft Close Dampers... 202-203 European Hinges with Built-in Soft Close... 204-205 110 European Hinges... 206-207 125 European Hinges... 208-209 45 Corner Overlay Hinge...210 90 Blind Corner Hinge...211 105 Pie Corner Hinge...212 170 Hinge...213 130 Pie-cut Corner Hinge...214 European Plates for Frameless Construction...215 European Plates for Face Frame Construction...216 European Plates for Hinges with Built-in Soft Close...217 Compact Hinges... 218-220 Hinges & Plates for Cabinet Refacing...221 Hinge Boring Equipment...222 Additional Installation Information...223 Drawer Slides USF Series Undermount Slides... 224-225 USE Series Undermount Slides... 226-229 USE Series Metal Drawer Box System... 230-231 300FU Series Ball Bearing Slides... 232-233 301FU Series Ball Bearing Slides... 234-235 303FU Series Ball Bearing Slides... 236-237 303FUSFT Series Ball Bearing Slides... 238-239 303FUP Series Push-to-Open Ball Bearing Slides...240-241 307FU Series Ball Bearing Slides... 242-243 307FUSFT Series Ball Bearing Slides... 244-245 307FU Series Keyboard Slides...246 Quick Tray Pilaster System...247 2000 Series Economy Epoxy Slides... 248-249 5000 Series Epoxy Slides... 250-251 9600 Series Premium Epoxy Slides... 252-253 9400/9500 Series Double Captive Epoxy Slides... 254-255 4000 Series Double Captive Epoxy Slides... 256-257 Shelf Supports & Accessories Angled Supports...258 Spoon Supports...259 Pin Supports...260 Plastic Shelf Locks...260 Standards & Clips...261 Decorative Hinges Self-Closing Overlay Hinge...262 Self-Closing 3/8 Inset Hinge...262 Self-Closing Full Wrap Around Hinges...263 Self-Closing Partial Wrap Around Hinges...264 Non Self-Closing Full Wrap Around Hinges... 265-266 Non Self-Closing Partial Wrap Around Hinges... 266-267 Institutional Hinges... 268-269 Cabinet and Drawer Accessories Pivot Hinge...270 Continuous Piano Hinge...270 False Front Clip...270 File Rod and Clip...271 Door Bumpers...272 Locks...272 Magnetic Catches...273 Roller Catches...274 Elbow Catches...274 Magnetic Touch Latches...274 Rectangular Strike Plates...274 Button Catches...275 Louvers...275 Shutter Hardware Non-Mortise Hinges... 276-277 Wrap Around Hinges...278 Butt Hinges... 279-280 Brackets & Miscellaneous Hardware Angled Corner Braces...281 Flat/Mending Plates...282 Drawer Adjustment Brackets...282 Plastic Brackets...283 Mirror Hanging Brackets...283 Grommets...284 Stem Glass Holder... 284 Shelf Brackets...285 Closet Hardware Oval Tubing & Mounting Brackets...286 Round Tubing & Mounting Brackets...286 Wardrobe Lift...287 Sliding Racks...287 Screws Hardware Attachment Flat Head Screws... 291-292 Oval Head Screws...292 Pan Head Screws...293 Pan Washer Head Screws...294 Undercut Screws...295 Truss Head Screws...295 Euro Screws...296 Truss Head Machine Screws...297 Break Away Truss Head Machine Screws...297 Cabinet Assembly & Installation Flat Head Nib Screws...298 Trim Head Screws...299 Bugle Head Screws...299 Standard Washer Head Screws...300 Large Washer Head Screws...300 Face Frame Screws...301 Confirmat Screws...302 Sheet Metal Screws...302 Special Application Draw Bolt...303 Connector Screws...303 Hollow Wall Anchor...304 Countersunk Finishing Washer...304 Drive Bits...305 Magnetic Bit Holders...305 Pozi Drive Screwdriver...305 201
Independent Soft Close Bulk Packed Retail Packed Nickel ISC ISC-R Recommended screw: #6 pan head screw included 200pcs/ctn 40pks/box 640pks/master One soft close for every application Face frame cabinetry (any overlay) Frameless cabinetry (full overlay) Mounts above the uppermost hinge using one screw Pressure adjustment dial on back of device Strong polymer construction with nickel plating Available in bulk pack or retail pack Retail pack includes #6 x 3/4 Pan Head screw and mounting instructions. 202
Clip-on Soft Close Available for 500 series long-arm European hinges, 22855 series compact European hinges and 3390 series compact hinges Quickly and easily installs onto hinge body Smooth closing motion on any size cabinet door Pressure adjustment dial on back of damper Average size doors only require one damper, oversize doors may require two For 500 series long arm European hinges with 0mm crank For 500 series long arm European hinges with 9mm crank 500.SC 500pcs/box 1000/master 500.SC.9 500pcs/box 1000/master For 500 series long arm European hinges with 15mm crank For 22855 series compact hinges For 22855 series compact hinges with cam adjustable plate For 3390 series compact hinges 500.SC.15 500pcs/box 1000/master 22855-7.SC 500pcs/box 1000/master 22855-9.SC 100pcs/box 600/master 3390.SC 500pcs/box 1000/master 203
European Hinges with Built-in Soft Close Concealed damper is hidden from the user and works on a variety of door sizes. Heavy gauge steel linkage will outlast the life of the cabinet. Standard cup size and depth. Standard 8mm dowels. No need for special boring pattern. BORING HOLE PATTERN Built-in soft close damper brings door to a soft and quiet close Hinge & plate provide 6-way adjustment» (3 dimensional) Clip-on base plates available for a wide variety of European and face frame applications Optional cam adjustable plates allow 6-way full cam adjustment Cold rolled steel construction with nickel plating Tested past 100,000 cycles - Guaranteed to surpass all ANSI, BHMA & KCMA requirements 204
European Hinges with Built-in Soft Close Application Full Overlay Hinge 110 Opening 0mm Crank Half Overlay Hinge 110 Opening 9mm Crank Full Inset Hinge 110 Opening 15mm Crank Full Overlay Hinge 125 Opening 0mm Crank No Dowels NEW 700.0535.05 (cam adjust) NEW 700.0534.05 (screw adjust) NEW 700.0536.05 NEW 700.0537.05 NEW 700.0U85.05 Press-in 8mm Dowels Easy-Fix Dowels with Cover NEW 700.0181.05 (cam adjust) NEW 700.0171.05 (screw adjust) NEW 700.0179.05 NEW 700.0280.05 NEW 700.0U84.05 NEW 700.0U86.05 Hinges are cam adjustable unless otherwise noted. Application Full Overlay Hinge 165 Opening 0mm Crank 45 Corner Overlay Hinge 105 Opening 18mm Crank 90 Blind Corner Hinge 105 Opening 0mm Crank Press-in 8mm Dowels NEW 700.0M73.05 50/ctn NEW 700.0N20.05 100/ctn NEW 700.0N24.05 Hinges are cam adjustable unless otherwise noted. 205
110 European Hinges 110 opening angle Hinge & plate provide 6-way adjustment (3 dimensional) Cold rolled steel construction with nickel plating Tested past 100,000 cycles - Guaranteed to surpass all ANSI, BHMA & KCMA requirements Clip-on base plates available for a wide variety of European and face frame applications BORING HOLE PATTERN Add Custom Branded Hinge Cover Caps YOUR Logo printed in black on white plastic caps Snaps onto all Vitus long-arm European hinges Delivered to you in about 3 weeks Tab Panel Thickness (V) (K) 16 17 18 19 20 21 22 3 0.3 0.5 0.7 1.0 1.3 1.7 2.5 4 0.3 1.0 0.7 0.9 1.2 1.6 2.1 5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 Minimum Reveal (F) 206
110 European Hinges Application 90 Full Overlay 0mm Crank Full Overlay 0mm Crank Half Overlay 9mm Crank Full Inset 15mm Crank No Dowels 500.0535.05 (cam adjust) 500.0534.05 (screw adjust) 500.0536.05 500.0537.05 Press-in 8mm Dowels 500.0161.05 (90 Restricted) 500.0181.05 (cam adjust) 500.0171.05 (screw adjust) 500.0179.05 (cam adjust) 500.0279.05 (screw adjust) 500.0280.05 Easy-Fix Dowels Hinge Cover Cap 500.CAP 1000/ctn 500.0186.05 500.CAP 1000/ctn 500.0539.05 500.CAP 1000/ctn 500.CAP 1000/ctn Clip-on Soft Close Damper 500.SC 500/ctn 500.SC 500/ctn 500.SC.9 500/ctn 500.SC.15 500/ctn Hinges are cam adjustable unless otherwise noted. 9 9 Plate Thickness Tab (K) (D) 3 4 5 6 0 14 15 16 17 3 11 12 13 14 6 8 9 10 11 9 5 6 7 8 Overlay Plate Thickness Panel Thickness Tab (K) (D) 3 4 5 6 (S) 7 5 3 1 16 0 10 8 6 4 19 13 11 9 7 22 16 14 12 10 25 Reveal (F) Plate Thickness Tab (K) (D) 3 4 5 6 9 4.5 3.5 2.5 1.5 Reveal (F) 207
125 European Hinges 125 opening angle Hinge & plate provide 6-way adjustment (3 dimensional) Cold rolled steel construction with nickel plating Tested past 100,000 cycles - Guaranteed to surpass all ANSI, BHMA & KCMA requirements Clip-on base plates available for a wide variety of European and face frame applications WI Approved BORING HOLE PATTERN Add Custom Branded Hinge Cover Caps YOUR Logo printed in black on white plastic caps Snaps onto all Vitus long-arm European hinges Delivered to you in about 3 weeks Tab Panel Thickness (V) (K) 16 17 18 19 20 21 22 23 24 3 0.5 1.5 1.9 2.4 2.9 3.4 4.1 4.8 5.6 4 1.2 2.0 1.8 2.2 2.7 3.3 3.8 4.5 5.2 5 1.1 1.4 1.8 2.2 2.6 3.1 3.6 4.3 4.9 6 1.1 1.4 1.7 2.1 2.5 2.9 3.5 4.0 4.7 Minimum Reveal (F) 208
125 European Hinges Application Full Overlay 0mm Crank Full Inset & Half Overlay 9mm Crank No Dowels 500.0U85.05 Press-in 8mm Dowels 500.0U84.05 Easy-Fix Dowels Lever-Top Dowels 500.0U86.05 500.0U94.05 500.0U99.05 Hinge Cover Cap 500.CAP 1000/ctn 500.CAP 1000/ctn Clip-on Soft Close Damper 500.SC 500/ctn 500.SC.9 500/ctn Hinges are cam adjustable unless otherwise noted. 9 9 Plate Thickness Tab (K) (D) 3 4 5 6 0 14 15 16 17 3 11 12 13 14 6 8 9 10 11 9 5 6 7 8 Overlay Plate Thickness Panel Thickness Tab (K) (D) 3 4 5 6 (S) 7 5 3 1 16 0 10 8 6 4 19 13 11 9 7 22 16 14 12 10 25 Reveal (F) Plate Thickness Tab (K) (D) 3 4 5 6 9 4.5 3.5 2.5 1.5 Reveal (F) 209
45 Corner Overlay Hinge Open Position Closed Position 105 opening angle Hinge & plate provide 6-way adjustment (3 dimensional) Cold rolled steel construction with nickel plating Designed for 45 inside corner and overlay cabinet applications BORING HOLE PATTERN Application Press-in 8mm Dowels Built-in Soft Close Press-in 8mm Dowels 500.0N20.05 100/ctn NEW 700.0N20.05 100/ctn Inside Corner 18mm Crank Plate Thickness Tab (K) (D) 3 4 5 6 0 6 5 4 3 Reveal (F) 210
90 Blind Corner Hinge Open Position Closed Position 105 opening angle Hinge & plate provide 6-way adjustment (3 dimensional) Cold rolled steel and zinc construction with nickel plating Designed for 90 blind corner applications BORING HOLE PATTERN Application Press-in 8mm Dowels Built-in Soft Close Press-in 8mm Dowels 500.0N24.05 NEW 700.0N24.05 Blind Corner 0mm Crank Plate Thickness Tab (K) (D) 3 4 5 6 7 3 5 4 3 2 1 Overlay 211
105 Pie Corner Hinge Application Press-in 8mm Dowels 500.0U22.05 100/ctn Pie Corner 18mm Crank 105 opening angle Hinge & plate provide 6-way adjustment (3 dimensional) Cold rolled steel and zinc construction with nickel plating Designed for connecting 2 doors in a corner unit Self-closing feature prevents the need for a magnetic catch BORING HOLE PATTERN Tab Panel Thickness (V) (K) 16 17 18 19 20 21 22 3 0.3 0.5 0.7 1.0 1.3 1.7 2.5 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1 5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 Minimum Reveal (F) Plate Setback Tab (K) (D) 3 4 5 27 2 3 4 32 7 8 9 37 12 13 14 Overlay Plate Thickness (D) Panel Thickness (S) 16 19 22 0 7 4 1 3 4 1-6 1 - - Gap 212
170 Hinge Application Full Overlay 0mm Crank Press-in 8mm Dowels Built-in Soft Close Press-in 8mm Dowels 170 opening angle Hinge & plate provide 6-way adjustment (3 dimensional) Cold rolled steel construction with nickel plating Designed for 170 applications with zero door gap Guaranteed to surpass all ANSI, BHMA & KCMA requirements 500.0M73.05 50/ctn NEW 700.0M73.05 50/ctn BORING HOLE PATTERN Tab Panel Thickness (V) (K) 16 17 18 19 20 21 22 3 3.5 4.5 4 0 2.5 3.5 4.5 5 1.5 2.5 3.5 4.5 6 0.5 1.5 2.5 3.5 4.5 Minimum Reveal (F) Plate Thickness (D) Panel Thickness (S) 3 4 5 6 0 14 15 16 17 3 11 12 13 14 6 8 9 10 11 Gap 213
130 Pie-cut Corner Hinge Open Position Closed Position 160 opening angle Hinge & plate provide 6-way adjustment (3 dimensional) Strong zinc die cast construction with nickel plating Shallow cup depth and wide range of adjustment allow for easy installation Application Pie Corner No Dowels 22877-000 214
For Frameless (European) Construction Mounting Plates Material: Cold rolled steel, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3mm 0mm 3mm 9mm 18mm 400.1233.05 400.1234.05 Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Height adjustment: +/- 3mm 400.0118.05 400.0119.05 Material: Cold rolled steel, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Cam height adjustment: +/- 2mm Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Cam height adjustment: +/- 2mm 400.0R22.05 400.0P71.05 400.0R24.05 400.0P73.05 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Cam height adjustment: +/- 2mm 400.0R23.05 400.0R25.05 Material: Zinc die cast, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Cam height adjustment: +/- 2mm 400.0P72.05 400.0P74.05 Material: Zinc die cast, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Height adjustment: +/- 3mm 400.0P29.05 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3mm 400.0P18.05 215
Mounting Plates For Face Frame Construction Material: Stamped steel, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3.5mm 0mm 3mm 6mm 9mm 400.3457.65 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3.5mm 400.3453.65 400.3454.65 400.3455.65 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Wrap around designed for MDF/ plywood face frames where 4 screws are needed to secure the plate and prevent screw pull out Height adjustment: +/- 3.5mm 400.3456.65 Material: Zinc die cast, nickel plated Sold without screws Use #8 x 3/4 pan head wood screws for attachment Designed for inset applications using 9mm crank hinges Cam height adjustment: +/- 3.5mm 400.3458.65 Material: Stamped steel, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3.5mm 400.3717.65 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3.5mm 400.3713.65 400.3714.65 400.3715.65 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Cam height adjustment: +/- 3.5mm 400.3723.65 400.3724.65 216
Mounting Plates for Hinges with Built-in Soft Close For Frameless (European) Construction for Hinges with Built-in Soft Close Material: Cold rolled steel, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3mm 0mm 600.1233.05 2mm 600.1234.05 Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Height adjustment: +/- 3mm Material: Cold rolled steel, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Cam height adjustment: +/- 2mm 600.0118.05 600.0R22.05 600.0119.05 600.0R24.05 Material: Cold rolled steel, nickel plated Preassembled with 6.3mm x 15mm Euro system screws Cam height adjustment: +/- 2mm For Face Frame Construction for Hinges with Built-in Soft Close Material: Stamped steel, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3.5mm 600.0P71.05 600.0P73.05 0mm 3mm 6mm 9mm 600.3456.65 600.3457.65 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Cam height adjustment: +/- 3.5mm 600.3553.65 600.3554.65 600.3555.65 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Wrap around designed for MDF/plywood face frames where 4 screws are needed to secure the plate and prevent screw pull out Height adjustment: +/- 3.5mm 600.3459.65 Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Designed for inset applications using 9mm crank hinges Cam height adjustment: +/- 3.5mm 600.3458.65 217
105 Compact Hinge with 4 Way Adjustment 105 opening angle One-piece compact assembly with vertical screw adjustment and horizontal cam adjustment Guaranteed to surpass all ANSI, BHMA & KCMA requirements Cold rolled steel construction with nickel plating #7 x 5/8 pan washer head screw recommended for installation Four mounting cleats securely wrap around the face frame BORING HOLE PATTERN 3mm Application Press-in 8mm Dowels 3396-000 1/2 Overlay 218
105 Compact Hinge with 6 Way Adjustment 105 opening angle One-piece compact assembly with vertical screw adjustment, horizontal cam adjustment and depth» cam adjustment BORING HOLE PATTERN Guaranteed to surpass all ANSI, BHMA & KCMA requirements 3mm Cold rolled steel construction with nickel plating #7 x 5/8 pan washer head screw recommended for installation Four mounting cleats securely wrap around the face frame Application 1/2 Overlay 7/16 Overlay 3/4 Overlay 1 Overlay 1-1/4 Overlay 1-3/8 Overlay 1-1/2 Overlay No Dowels 3390 Press-in 8mm Dowels 42mm Grass Hole Pattern Press-in 8mm Dowels 3390-2-000 3390-4-000 3390-716 3390-6-000 3391-000 3394-000 3393-000 3392-000 Easy-Fix Dowels 3390-3-000 Clip-on Soft Close Damper 3390.SC 500/ctn Hinge Cover Cap with Custom Branding 3390.CAP 1000/ctn 3390.CAP 1000/ctn 3390.CAP 1000/ctn 3390.CAP 1000/ctn 219
125 Compact Hinge with 6 Way Adjustment 125 opening angle NEW Cam adjustable plate (22855-9 & 22855-10) One-piece compact assembly with vertical screw or cam adjustment, horizontal cam adjustment and depth cam adjustment Cold rolled steel construction and zinc die cast plate with nickel plating BORING HOLE PATTERN Die cast face frame plate securely grasps the face 5mm frame and provides two attachment points #7 x 5/8 pan washer head screw recommended for installation Guaranteed to surpass all ANSI, BHMA & KCMA requirements Application 1/2 Overlay with Cam Adj Plate 1/2 Overlay 3/4 Overlay No Dowels 22855-10 22855-8-000N Press-in 8mm Dowels 22855-9 22855-7-000N 22855-6-000N Clip-on Soft Close Damper 22855-7.SC 500/ctn 22855-7.SC 500/ctn Clip-on Soft Close Damper 22855-9.SC 500/ctn 220
Hinges & Plates for Cabinet Refacing 125 Compact Hinge - 6 Way Adjustment 125 opening angle NEW Mounting holes on plate are indexed 1/4 away from face frame. This prevents mounting screws from penetrating the seam between the 1/4 reface material and the face frame. NEW Easy-Fix Dowels are available for quick installation. This eliminates the need to hammer in hinges with pre-installed 8mm dowels. This also eliminates the need for hinge boring machine insertion. Application No Dowels Easy-Fix Dowels Screw-on Soft Close Damper 1/2 Overlay with Cam Adj Plate 22855-12 22855-11 22855-9.SC 500/ctn One-piece compact assembly with vertical, horizontal and depth cam adjustment Cold rolled steel construction and zinc die cast plate with nickel plating Die cast face frame plate securely grasps the face frame and provides two attachment points #6 x 5/8 flat head wood screws recommended for plate installation Guaranteed to BORING HOLE PATTERN surpass all ANSI, 5mm BHMA & KCMA requirements Independent Soft Close Damper ISC Face Frame Plate Works with all Vitus 110 long arm hinges 0mm NEW Mounting holes on plate are indexed 1/4 away from face frame. This prevents mounting screws from penetrating the seam between the 1/4 reface material and the face frame. Material: Zinc die cast, nickel plated Sold without screws Use #6 x 5/8 flat head wood screws for attachment Height adjustment: +/- 3.5mm 400.3553.65 3mm 400.3554.65 221
Mounting Hardware & Accessories Boring Machine 220V single phase boring machine, 1.5 HP, 3450 RPM Single-handed operation Quick tab setting with dial indicator Board placement guide provides fast and consistent alignment Fully adjustable up and down speed setting Each machine is fine tuned and preset before shipment Insertion Rams HRBORE220SP Ships preassembled with bits and long-arm Euro hinge ram Ships with tool kit Affordable hinge commitment program Insertion Ram for Compact Hinges Replacement Bits Insertion Ram for 110 & 125 Long Arm Euro Hinges Insertion Ram for 170 Long Arm Euro Hinges Standard RAM3386 LARM-110 100LM-175 Soft-close LARM-110.SFT 8mm Brad Bit for Dowel Hole 35mm Center Bit for Cup Hole 201008 203351 Solid steel construction guaranteed to last and to hold tolerances Magnetic and ball bearing catches integrated into ram to hold hinge in place during insertion Available for all popular Vitus hinges Solid carbide cutting edge stays sharp and precise Carbon alloy steel prevents corrosion and defects Dowels & Screws 8mm Dowels for Vitus Hinges Dowel Screws for Vitus Hinges 276.4389.37 828.6250.05 222
Hinge Mounting Information Determining the Number of Hinges per Door Long Arm European Hinge Compact Hinge Door Height Door Height 79-94 up to 24 wide 79-98 up to 24 wide 63-79 up to 24 wide 63-79 up to 24 wide 35-1/2-63 up to 35-1/2 up to 24 wide up to 24 wide 2 3 4 5 35-1/2-63 up to 35-1/2 up to 24 wide up to 24 wide 2 3 4 5 1-20lbs 20-40lbs 40-60lbs 60lbs + Door Weight NOTE: Avoid doors that are wider than they are tall. Keep hinges as close to top and bottom of door as possible. Attach hinges and plates using all available holes. Adjusting the Hinge European Hinge - 500 & 700 series 1-12lbs 12-20lbs 20-33lbs 33-48lbs VERTICAL +2mm -2mm Door Weight DEPTH +5mm -1.5mm HORIZONTAL +3mm -1mm Compact Hinge - 339x series Compact Hinge - 22855 series DEPTH DEPTH VERTICAL VERTICAL HORIZONTAL HORIZONTAL 223
3/4 Extension Undermount Slide for Face Frame Construction USF Series 3/4 extension slide completely hidden from the user Soft close feature automatically engages the drawer and brings it to a swift, soft and quiet close 75lb dynamic load capacity suitable for all medium duty applications For face frame construction cabinets only - excess steel material eliminated to create a true value undermount Accepts drawers up to 5/8 thickness Left and right release clips included Non-handed rear brackets included USF15 10pr/ctn USF18 10pr/ctn USF21 10pr/ctn 15 3/4 Extension Slide 18 3/4 Extension Slide 21 3/4 Extension Slide Cold rolled steel with zinc plating Rollers are constructed from premium POM synthetic plastic and cylindrically ground to produce a smooth and seamless motion throughout close Spring-loaded soft close dampers are individually tested before shipment #6 flat head wood screw recommended for installation Front face frame bracket securely welded to the slide for fast attachment to the face frame Release clips and rear brackets included USF-CLIP-L 100/ctn USF-CLIP-R 100/ctn Left Hand Replacement Release Clip Right Hand Replacement Release Clip Heavy duty all-plastic construction eliminates breakage Aligns to corner of drawer box for fast and flush installation #6 x 5/8 Pan Head screw recommended for installation USE-STEEL 100pr/ctn Rear Bracket for Face Frame Application Zinc plated steel construction Slotted installation holes for vertical & horizontal adjustment Slot in slide allows for 1-5/8 depth adjustment #6 x 5/8 pan washer head screw recommended for installation REAR NOTCH DIMENSIONS 7 (9/32") 6 (1/4") 11 (7/16") 12.70 (1/2") 32 (1-1/4") 224
3/4 Extension Undermount Slide for Face Frame Construction Construction & Assembly Specifications FACE FRAME Slide Length Total Cabinet Depth Overall Drawer Length Min Inside Cabinet Depth Max Inside Cabinet Depth 15-5/16 389mm 18 457mm 15 381mm 15-7/8 403mm 17-9/16 446mm 18-5/16 465mm 21 533mm 18 457mm 18-7/8 479mm 20-9/16 522mm 21-5/16 541mm 24 610mm 21 533mm 21-7/8 555mm 23-9/16 598mm Assume 4mm (5/32 ) setback from drawer opening Rear brackets for face frame applications will yield a 5mm-48mm (3/16-1-7/8 ) depth adjustment For inset drawer front applications: Setback: 5mm (3/16 ) + Drawer Front Thickness For face frame cabinets, Inside Cabinet Depth Minimum = Slide Length + Setback + 5mm (3/16 )»»»»»»»»Inside Cabinet Depth Maximum = Slide Length + Setback + 48mm (1-5/16 ) FRONT VIEW OF THE DRAWER INSIDE THE CABINET INSIDE CABINET WIDTH OUTSIDE DRAWER WIDTH Maximum Drawer Height = Opening - 20mm (13/16 ) MIN. TOP CLEARANCE 6 (1/4") OUTSIDE DRAWER WIDTH CALCULATIONS OPENING DRAWER THICKNESS INSIDE CABINET WIDTH MINUS 42 (1-5/8") MAX. DRAWER HEIGHT = OPENING MINUS 16.3 (5/8") 32 (1-1/4") BOTTOM CLEARANCE 10.30 (3/8") BOTTOM RECESS 12.70 (1/2") 36.30 24.30 (1-7/16") (15/16") Drawer Side Thickness Inside Cabinet Width Deduction 5/8 16mm 3/8 10mm 19/32 15mm 15/32 12mm 9/16 14mm 9/16 14mm 1/2 13mm 5/8 16mm 15/32 12mm 23/32 18mm 225
Full Extension Undermount Slide New & Bumper Pad - fitted around rear hook for secure adhesion Rear Hook - strengthened for less tendency to bend Damper - improved with lighter opening force 226
Full Extension Undermount Slide Improved! Catch - hook weld improved and lengthened to better engage trip mechanism Inner Member - plastic part modified so it does not drag on the bottom of the drawer slide Clip - strengthened and improved vertical adjustment hold 227
Full Extension Undermount Slide USE Series Full extension slide completely hidden from the user Soft close feature automatically engages the drawer and brings it to a swift, soft and quiet close 100lb dynamic load capacity guaranteed to surpass all ANSI, BHMA & KCMA requirements Works in a wide variety of applications: face frame, frameless (European), overlay & inset cabinets for drawers up to 5/8 thickness Left and right release clips included, featuring toolless height adjustment USE12 10pr/ctn USE15 10pr/ctn USE18 10pr/ctn USE21 10pr/ctn 12 Full Extension Slide Cold rolled steel with zinc plating Rollers are constructed from premium POM synthetic 15 Full Extension Slide plastic and cylindrically ground to produce a smooth and seamless motion throughout close Spring-loaded soft close dampers are individually tested 18 Full Extension Slide before shipment #6 flat head wood screw or 6.3mm Euro screw 21 Full Extension Slide recommended for installation US-CLIP-L 500/ctn US-CLIP-R 500/ctn USE-SPACER 100/ctn USE-STEEL 100pr/ctn USE-ADJ 250pr/ctn Left Hand Replacement Release Clip Right Hand Replacement Release Clip 1/8 Spacer for 1/2 Drawer Box Material Rear Bracket for Face Frame Application Rear Bracket with Dowels for Face Frame Application Heavy duty zinc & plastic construction eliminates breakage Aligns to corner of drawer box for fast and flush installation Toolless height adjustment for up to 1/8 #6 x 5/8 Pan Head screw recommended for installation Allows box dimensions to remain constant when switching from 5/8 to 1/2 material thickness Fits securely behind each clip and against the box material Zinc plated steel construction Slotted installation holes for vertical & horizontal adjustment Slot in slide allows for 1-5/8 depth adjustment #6 x 5/8 pan washer head screw recommended for installation Heavy duty all-plastic construction Dowels plug into predrilled 8mm system holes Bracket provides wide range of lateral adjustment Slot in slide allows for 1-5/8 depth adjustment FRONT HOLE PATTERN 33 (1-5/16") 9 (11/32") 6 (1/4") REAR NOTCH DIMENSIONS 17.5 (11/16") 30 (1-3/16") 7 (9/32") 6 (1/4") 36.5 (1-7/16") 7 (9/32") 11 (7/16") 12.70 (1/2") 24.5 (31/32") 32 (1-1/4") 228
Full Extension Undermount Slide Construction & Assembly Specifications FRAMELESS FACE FRAME Slide Length Total Cabinet Depth Overall Drawer Length Min Inside Cabinet Depth Min Inside Cabinet Depth Max Inside Cabinet Depth USE12 305 (12") drawer 318 (12-1/2") 224 (8-13/16") 9 (11/32") 12-1/2 318mm 15 381mm 12 305mm 12-5/8 321mm 12-7/8 326mm 14-9/16 369mm USE15 381 (15") drawer 394 (15-1/2") 224 (8-13/16") 128 (5-1/16") 9 (11/32") 15-1/2 394mm 18 457mm 15 381mm 15-11/16 398mm 15-7/8 403mm 17-9/16 446mm USE18 457 (18") drawer 470 (18-1/2") 224 (8-13/16") 192 (7-9/16") 18-1/2 470mm 21 533mm 18 457mm 18-11/16 474mm 18-7/8 479mm 20-9/16 522mm USE21 533 (21") drawer 546 (21-1/2") 224 (8-13/16") 256 (10-1/16") 21-1/2 546mm 24 610mm 21 533mm 21-11/16 550mm 21-7/8 555mm 23-9/16 598mm Assume 4mm (5/32 ) setback from drawer opening Rear brackets for face frame applications will yield a 5mm-48mm (3/16-1-7/8 ) depth adjustment For inset drawer front applications: Setback: 5mm (3/16 ) + Drawer Front Thickness For frameless cabinets, Inside Cabinet Depth Minimum = Slide Length + Setback + 3mm (1/8 ) For face frame cabinets, Inside Cabinet Depth Minimum = Slide Length + Setback + 5mm (3/16 )»»»»»»»»Inside Cabinet Depth Maximum = Slide Length + Setback + 48mm (1-5/16 ) FRONT VIEW OF THE DRAWER INSIDE THE CABINET INSIDE CABINET WIDTH OUTSIDE DRAWER WIDTH Maximum Drawer Height = Opening - 20mm (13/16 ) MIN. TOP CLEARANCE 6 (1/4") OUTSIDE DRAWER WIDTH CALCULATIONS OPENING DRAWER THICKNESS INSIDE CABINET WIDTH MINUS 42 (1-5/8") MAX. DRAWER HEIGHT = OPENING MINUS 16.3 (5/8") 32 (1-1/4") BOTTOM CLEARANCE 10.30 (3/8") BOTTOM RECESS 12.70 (1/2") 36.30 24.30 (1-7/16") (15/16") Drawer Side Thickness Inside Cabinet Width Deduction 5/8 16mm 3/8 10mm 19/32 15mm 15/32 12mm 9/16 14mm 9/16 14mm 1/2 13mm 5/8 16mm 15/32 12mm 23/32 18mm 229
Metal Drawer Box System for Full Extension Undermount Slides USE Series Shown assembled as CAN-MDB. Wooden parts not included with standard metal drawer box system. Sleek metal drawer box system built onto full extension, soft-closing, 100lb dynamic capacity undermount slides Solid steel construction with grey heavy powdercoat finish Can be used in a wide variety of applications including face frame, frameless (European), overlay and inset cabinetry Use front cams for vertical and horizontal drawer front adjustment Front release cam for easy drawer front release USE12-MDB 5pr/ctn USE15-MDB 5pr/ctn USE18-MDB 5pr/ctn USE21-MDB 5pr/ctn 12 Full Extension Metal Drawer Box Kit 15 Full Extension Metal Drawer Box Kit 18 Full Extension Metal Drawer Box Kit 21 Full Extension Metal Drawer Box Kit Release front panel Lock front panel Adjust front panel to left Adjust down Adjust front panel to right Adjust up Release screw Heavy duty 100lb load capacity One pair includes slides, release clips, grey drawer sides, drawer front fixing brackets, drawer back fixing brackets and mounting hardware Use Phillips screwdriver for adjustment (see picture left) Optional height extension kit available with cross rail connectors Use 5/8 thick material for building the drawer back and drawer bottom 230 USE12-MDB-ROD 50/ctn USE15-MDB-ROD 50/ctn USE18-MDB-ROD 50/ctn USE21-MDB-ROD 50/ctn USE-MDB-1 100pr/ctn USE-MDB-2 100pr/ctn USE-MDB-RAIL 100/ctn 12 Drawer Height Extension Kit 15 Drawer Height Extension Kit 18 Drawer Height Extension Kit 21 Drawer Height Extension Kit Single Cross Rail Connector Double Cross Rail Connector 700mm Cross Rail for Metal Drawer Box Connectors Used in addition to the full extension metal drawer box kit Extends total drawer back height to 7-13/16 Two gallery rails and two extended back plates included in each kit Creates a deep drawer perfect for pots, pans, plates and storage of various kitchen items Shown with optional cross rail connectors Used in addition to the full extension metal drawer box kit Used in conjunction with the drawer height extension kit Creates a single or double cross rail divider in the drawer Slides along the gallery rail and tightens into place 700mm cross rail is cut by customer according to the drawer width
Metal Drawer Box System for Full Extension Undermount Slides Construction & Assembly Specifications Assembly Instructions [use 16mm (5/8 ) material] 1. Drawer bottom length = inside cabinet length - 18mm (23/32 ) Drawer bottom width = inside cabinet width - 111mm (4-3/8 ) Drawer back width = inside cabinet width - 119mm (4-11/16 ) Drawer back height: Regular system = 67mm Using Extension Kit = 167mm 2. Attach drawer back into rear fitting bracket. Snap the rear fixing brackets into the back of the drawer profiles. 3. Slide the drawer bottom into the slots on drawer sides. 4. Attach front fixing brackets to drawer front. Snap the drawer front brackets into the front of the drawer profiles. 5. Push drawer bottom firmly against the drawer front and attach with wood screws. 6. Optional gallery rails and cross bars can be installed if using height extension kit. 231
Extra Heavy Duty Ball Bearing Slide Full Extension 300FU Series 300FU18 18 Zinc Slide Load Rating 150lb dynamic, 225lb static, ANSI/BHMA Grade 1 Travel Full extension 300FU20 300FU22 20 Zinc Slide 22 Zinc Slide Profile Height 2 Mounting Style Non-handed side mount with flexible mounting tabs for frameless and face frame cabinetry Hole Pattern Easy access 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #8 x 7/16 truss head screw recommended) 300FU24 300FU26 300FU28 24 Zinc Slide 26 Zinc Slide 28 Zinc Slide Clearance Material Finish Bearing Release Detent 1/2 side spacing 1.5mm x 1.5mm x 1.5mm cold rolled steel Clear zinc electroplated Lubricated steel ball bearings Non-handed trigger disconnect Heavy duty synthetic rubber hold-in detent prevents drawer bounce-back and roll-out 232
Extra Heavy Duty Ball Bearing Slide Full Extension Hole Pattern and Length Specifications DRAWER MEMBER Specifications L A B C 28 36 24 22 550 64 64 50 20 500 64 - - 18 450 - - - CABINET MEMBER Specifications L A B C 28 36 24 22 548 64 192 106 20 498 64 160 106 18 448-192 146 233
Heavy Duty Ball Bearing Slide Full Extension 301FU Series 301FU10 10 Zinc Slide Load Rating Travel 100lb dynamic, 200lb static, ANSI/BHMA Grade 1 HD-100 Full extension (18, 20, & 22 lengths have 1/2 overtravel) 301FU12 301FU350 301FU14 301FU16 301FU18 301FU20 301FU22 301FU24 301FU26 301FU28 12 Zinc Slide 350mm Zinc Slide 14 Zinc Slide 16 Zinc Slide 18 Zinc Slide 20 Zinc Slide 22 Zinc Slide 24 Zinc Slide 26 Zinc Slide 28 Zinc Slide Profile Height Mounting Style Hole Pattern Clearance Material Finish Bearing 301FU2 100pr/ctn 301FU3 100pr/ctn Release Detent 45mm Non-handed side mount with flexible mounting tabs for frameless and face frame cabinetry Easy access 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #8 x 7/16 truss head screw recommended) 1/2 side spacing 1.2mm x 1.2mm x 1.5mm cold rolled steel Clear zinc electroplated Lubricated steel ball bearings with patented cage hold forward - retains cage during drawer member installation Non-handed trigger disconnect Synthetic rubber hold-in detent prevents drawer bounce back and roll-out Rear Mounting Bracket Self- Adjusting Plastic Rear Bracket Solid steel construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment Bracket allows 3 of depth adjustment #6 pan head wood screw recommended for installation Solid steel construction with thick plastic bracket Mounts to rear cabinet wall and laterally self adjusts Provides 3 of depth adjustment #6 pan head wood screw recommended for installation 301FU4 100pr/ctn Face Frame Front Mounting Bracket Solid steel construction Mounts to face frame and snaps into existing hole on cabinet member #6 pan head wood screw recommended for installation 234
Heavy Duty Ball Bearing Slide Full Extension Hole Pattern and Length Specifications DRAWER MEMBER Specifications L3 A3 B3 C3 28 709 255.5 320 248.6 26 658 236.5 339 250.4 24 608 224 288 186 22 557 205 275 179.6 20 506 173 243 141.8 18 455 141 211 103.6 16 404 128 192 96.6 14 354 96 160 57.8 12 303 77 147 50.5 10 250-175 38.5 CABINET MEMBER Specifications L1 A1 B1 C1 D1 E1 28 711.2 128 192 82.2 25.45 32.15 26 660.4 128 192 31.4 25.45 32.15 24 609.6 128 128 44.6 25.45 32.15 22 558.8 128 64 57.8 25.45 32.15 20 508 128 64-25.45 32.15 18 457.2 128 - - 25.45 32.15 16 406.4 64-38.5 - - 14 355.6 - - 47.3 - - 12 304.8 - - - - - 10 254 - - - - - 235
Heavy Duty Ball Bearing Slide Full Extension 303FU Series Load Rating 100lb dynamic, 200lb static, ANSI/BHMA Grade 1 HD-100 Travel Full extension 303FU10 10 Zinc Slide Profile Height Mounting Style 45mm Non-handed side mount with flexible mounting tabs for frameless and face frame cabinetry 303FU10BLK 303FU12 303FU12BLK 303FU14 303FU14BLK 303FU16 303FU16BLK 303FU18 303FU18BLK 303FU20 303FU20BLK 303FU22 303FU22BLK 303FU24 10 Black Slide 12 Zinc Slide 12 Black Slide 14 Zinc Slide 14 Black Slide 16 Zinc Slide 16 Black Slide 18 Zinc Slide 18 Black Slide 20 Zinc Slide 20 Black Slide 22 Zinc Slide 22 Black Slide 24 Zinc Slide Hole Pattern Clearance Material Finish Bearing 303FU2 100pr/ctn 303FU3 100pr/ctn 303FU5 100pr/ctn 303FU6 100pr/ctn Release Detent Easy access 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #8 x 7/16 truss head screw recommended) 1/2 side spacing 1.0mm x 1.0mm x 1.2mm cold rolled steel Clear zinc electroplated Lubricated steel ball bearings with patented cage hold forward - retains cage during drawer member installation Non-handed trigger disconnect Synthetic rubber hold-in detent prevents drawer bounce back and roll-out Rear Mounting Bracket Self- Adjusting Plastic Rear Bracket Rear Mounting Bracket with 8mm Dowels Rear Mounting Bracket with 10mm Dowels Solid steel construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment Bracket allows 3 of depth adjustment #6 pan head wood screw for installation Solid steel construction with thick plastic bracket Mounts to rear cabinet wall and laterally self adjusts Provides 3 of depth adjustment #6 pan head wood screw for installation Solid steel construction with thick plastic bracket Dowels plug into predrilled 8mm system holes drilled on 32mm centers Mounts to rear cabinet wall and laterally self adjusts Provides 3 of depth adjustment Solid steel construction with thick plastic bracket Dowels plug into predrilled 10mm system holes drilled on 32mm centers Mounts to rear cabinet wall and laterally self adjusts Provides 3 of depth adjustment 303FU26 303FU28 26 Zinc Slide 28 Zinc Slide 303FU4 100pr/ctn Face Frame Front Mounting Bracket Solid steel construction Mounts to face frame and snaps into existing hole on cabinet member #6 pan head wood screw for installation 236
Hole Pattern and Length Specifications DRAWER MEMBER Heavy Duty Ball Bearing Slide Full Extension Specifications L3 A3 B3 C3 D3 28 697 192 256 160 227 26 647 192 224 160 167 24 597 192 320-140 22 547 224 224-81 20 497 192 224-95 18 447 160 192-101 16 397 128 192-110.5 14 347 128 128-85 12 297 96 128-90 10 247 169 - - - CABINET MEMBER Installation Covers Protect slides from paint, stain and dust during installation 303COVER-C 100pcs/ctn 303COVER-D 100pcs/ctn Installation cover cabinet member Installation cover drawer member High strength plastic allows for multiple uses Installs on job site to protect slides from dust, paint, stain and damage Sold in 8 sticks - cut to fit any slide length Easily snaps on and off Specifications L1 A1 B1 C1 28 700 256 224 64 26 650 206 224 64 24 600 352-64 22 550 288-64 20 500 288-64 18 450 160 128-16 400 160-64 14 350 160 - - 12 300 126 - - 10 250 76 - - 237
Heavy Duty Ball Bearing Slide Soft Close Full Extension 303FUSFT Series 303FUSFT12 12 Zinc Slide Load Rating 100lb dynamic, 175lb static, ANSI/BHMA Grade 1 Travel Full extension 303FUSFT14 303FUSFT16 14 Zinc Slide 16 Zinc Slide Profile Height Mounting Style Hole Pattern 45mm Non-handed side mount with flexible mounting tabs for frameless and face frame cabinetry Easy access 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #8 x 7/16 truss head screw recommended) 303FUSFT18 18 Zinc Slide Clearance Material 1/2 side spacing 1.0mm x 1.0mm x 1.2mm cold rolled steel 303FUSFT20 303FUSFT22 303FUSFT24 303FUSFT26 303FUSFT28 20 Zinc Slide 22 Zinc Slide 24 Zinc Slide 26 Zinc Slide 28 Zinc Slide 303FUSFT2 100pr/ctn 303FUSFT3 100pr/ctn Finish Bearing Release Clear zinc electroplated Lubricated steel ball bearings with patented cage hold forward - retains cage during drawer member installation Non-handed trigger disconnect Rear Mounting Bracket Self- Adjusting Plastic Rear Bracket Solid steel construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment Bracket allows 3 of depth adjustment #6 pan head wood screw for installation Solid steel construction with thick plastic bracket Mounts to rear cabinet wall and laterally self adjusts Provides 3 of depth adjustment #6 pan head wood screw for installation 303FU4 100pr/ctn Face Frame Front Mounting Bracket Solid steel construction Mounts to face frame and snaps into existing hole on cabinet member #6 pan head wood screw for installation 238
Heavy Duty Ball Bearing Slide Soft Close Full Extension Hole Pattern and Length Specifications DRAWER MEMBER Specifications L3 A3 B3 C3 D3 28 698 192 256 160 227 26 648 192 224 160 167 24 598 192 320-142 22 548 224 224-85 20 498 192 224-87 18 448 160 192-94 16 398 128 192-106 14 348 128 128-75 12 298 96 128-88 Installation Covers Protect slides from paint, stain and dust during installation 303COVER-C 100pcs/ctn 303COVER-D 100pcs/ctn Installation cover cabinet member Installation cover drawer member High strength plastic allows for multiple uses Installs on job site to protect slides from dust, paint, stain and damage Sold in 8 sticks - cut to fit any slide length Easily snaps on and off CABINET MEMBER Specifications L1 A1 B1 28 700 256 224 26 650 206 224 24 600 352-22 550 288-20 500 256-18 450 224-16 400 160-14 350 128-12 300 94-239
Push-to-Open Ball Bearing Slides Full Extension 303FUP Series 303FUP12 12 Zinc Slide Load Rating Travel 100lb dynamic, 200lb static Full extension 303FUP14 303FUP16 14 Zinc Slide 16 Zinc Slide Profile Height Mounting Style Hole Pattern 45mm Non-handed side mount with flexible mounting tabs for frameless and face frame cabinetry Easy access 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #8 x 7/16 truss head screw recommended) 303FUP18 18 Zinc Slide Clearance Material 1/2 side spacing 1.0mm x 1.0mm x 1.2mm cold rolled steel 303FUP20 303FUP22 303FUP24 303FUP26 20 Zinc Slide 22 Zinc Slide 24 Zinc Slide 26 Zinc Slide 303FUSFT2 100pr/ctn Finish Bearing Release Clear zinc electroplated Lubricated steel ball bearings with patented cage hold forward - retains cage during drawer member installation Non-handed trigger disconnect Rear Mounting Bracket Solid steel construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment Bracket allows 3 of depth adjustment #6 pan head wood screw for installation 303FUP28 28 Zinc Slide 303FU4 100pr/ctn Face Frame Front Mounting Bracket Solid steel construction Mounts to face frame and snaps into existing hole on cabinet member #6 pan head wood screw for installation For Inset application, no special installation required For Overlay application, allow 1/8 clearance for push-to open mechanism Opens drawer approximately 2 from closed position Great for clean-line drawers without hardware and commercial cabinetry 240
Push-to-Open Ball Bearing Slides Full Extension Hole Pattern and Length Specifications DRAWER MEMBER Specifications L3 A3 B3 C3 D3 28 688 192 256 160 452 26 628 192 224 160 420 24 588 192 320-395 22 538 224 224-365 20 488 192 224-340 18 438 160 192-320 16 388 128 192-290 14 338 128 128-255 12 288 96 128-220 CABINET MEMBER Specifications L1 A1 B1 28 700 206 224 26 650 352-24 600 352-22 550 288-20 500 256-18 450 160-16 400 128-14 350 96-12 300 64 - Installation Covers Protect slides from paint, stain and dust during installation 303COVER-C 100pcs/ctn 303COVER-D 100pcs/ctn Installation cover cabinet member Installation cover drawer member High strength plastic allows for multiple uses Installs on job site to protect slides from dust, paint, stain and damage Sold in 8 sticks - cut to fit any slide length Easily snaps on and off 241
Medium Duty Ball Bearing Slide Full Extension 307FU Series 307FU10 10 Zinc Slide Load Rating 75lb, ANSI/BHMA Grade 1 Travel Full extension 307FU12 307FU14 12 Zinc Slide 14 Zinc Slide Profile Height Mounting Style Hole Pattern 36mm Non-handed side mount with flexible mounting tabs for frameless and face frame cabinetry Easy access 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #8 x 7/16 truss head screw recommended) 307FU16 16 Zinc Slide Clearance Material 1/2 side spacing 1.2mm x 1.0mm x 1.2mm cold rolled steel 307FU18 307FU20 307FU22 18 Zinc Slide 20 Zinc Slide 22 Zinc Slide 307FU2 100pr/ctn Finish Bearing Release Detent Clear zinc electroplated Lubricated steel ball bearings with patented cage hold forward - retains cage during drawer member installation Non-handed trigger disconnect Synthetic rubber hold-in detent prevents drawer bounce back and roll-out Rear Mounting Bracket Solid steel construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment Bracket allows 3 of depth adjustment #6 pan head wood screw recommended for installation 307FU3 100pr/ctn Self- Adjusting Plastic Rear Bracket Solid steel construction with thick plastic bracket Mounts to rear cabinet wall and laterally self adjusts Provides 3 of depth adjustment #6 pan head wood screw recommended for installation 307FU4 100pr/ctn Face Frame Front Mounting Bracket Solid steel construction Mounts to face frame and snaps into existing hole on cabinet member #6 pan head wood screw recommended for installation 242
Medium Duty Ball Bearing Slide Full Extension Hole Pattern and Length Specifications DRAWER MEMBER Specifications L A B C D 22 548 333 163 419 227 20 498 333 163 387 227 18 448 309 163 355-16 398 287 163 - - 14 348 261 163 - - 12 298 223 163 - - 10 248 179 99 - - CABINET MEMBER Specifications L A B C 22 550 259 387 451 20 500 259 387 451 18 450 259 387-16 400 259 323-14 350 259 - - 12 300 259 - - 10 240 185 - - 243
Medium Duty Ball Bearing Slide Soft Close Full Extension 307FUSFT Series Quick-Mount Tabs for Fast Installation (also available without tab) Load Rating 65lb dynamic, 140lb static, ANSI/BHMA Grade 1 Travel Full extension Profile Height 36mm Mounting Style Handed side mount or bottom mount with flexible mounting tabs for frameless and face frame cabinetry. Drawer sits on quick-mount shelf tabs. Hole Pattern Easy access 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #8 x 7/16 truss head screw recommended) Clearance 1/2 side spacing Material 1.2mm x 1.0mm x 1.2mm cold rolled steel 307FUSFT12-T 307FUSFT12 307FUSFT14-T 307FUSFT14 307FUSFT16-T 307FUSFT16 307FUSFT18-T 12 Zinc Slide with Tabs 12 Zinc Slide 14 Zinc Slide with Tabs 14 Zinc Slide 16 Zinc Slide with Tabs 16 Zinc Slide 18 Zinc Slide with Tabs 307FU2 100pr/ctn 307FU4 100pr/ctn Finish Bearing Release Clear zinc electroplated Lubricated steel ball bearings with patented cage hold forward - retains cage during drawer member installation Non-handed trigger disconnect Rear Mounting Bracket Face Frame Front Mounting Bracket Solid steel construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment Bracket allows 3 of depth adjustment #6 pan head wood screw recommended for installation Solid steel construction Mounts to face frame and snaps into existing hole on cabinet member #6 pan head wood screw recommended for installation 307FUSFT18 18 Zinc Slide 307FUSFT20-T 20 Zinc Slide with Tabs 307FUSFT20 20 Zinc Slide 307FUSFT22-T 22 Zinc Slide with Tabs 307FUSFT22 22 Zinc Slide 244
Medium Duty Ball Bearing Slide Soft Close Full Extension Hole Pattern and Length Specifications CABINET MEMBER Specifications L A B 22 550 160 96 20 500 160-18 450 160-16 400 96-14 350 - - 12 300 - - DRAWER MEMBER WITH QUICK-MOUNT TABS Specifications L A B 22 548 408 379 20 498 358 353 18 448 308 315 16 398 258 265 STANDARD DRAWER MEMBER 14 348 208 215 12 298 158 165 1-2-3 Fast Installation Specifications L A B C D 22 548 375 163 227 439 20 498 349 163 227 389 18 448 311 163-339 16 398 263 163-289 14 348 212 131-239 12 298 160 - - 189 1. Install cabinet member by resting on face frame cross rail and sliding into rear brackets. 2. Flip drawer box over and rest tabs of drawer member on the bottom of drawer box. Install with two screws. 3. Engage drawer member with cabinet member. Drawer box will be 1/2 above the cross rail of face frame. 245
Ball Bearing Keyboard Slide Full Extension 307FU Series Without Tray 70541BK 20pr/ctn 14 Black Slide Variable height range of 2 to 3-7/8» in 7/16 increments Heavy duty cold rolled steel construction with black powdercoat finish Keyboard slide built onto a 14 ball bearing slide with 11-1/4 tray extension #8 x 3/4 pan washer head screw recommended for installation With Tray 2055 10pr/ctn 14 Zinc Slide with light gray tray Variable height range of 2-3/16 to 3-1/2» in 7/16 increments Heavy duty cold rolled steel construction with clear zinc finish Light grey keyboard tray preassembled and featuring a pen holder tray with lid Tray is 22 wide x 10 deep Keyboard slide built onto a 14 ball bearing slide with 10 tray extension #8 x 3/4 pan washer head screw recommended for installation 246
Quick Tray System System only requires four simple components Overall height is 20-1/8 Vertical adjustment of shelves in increments of 1-1/4 No tools necessary for shelf adjustments Front spacing lip allows for offset behind the face frame Supports are non-handed for easy installation Frameless application can be mounted with wood or euro screws Face frame application can be fastened with staples or wood screws Can be factory installed or added to existing cabinets Use with any slide: UNDERMOUNT White Beige B500-00 100pc/ctn B520-00 20pks/ctn B521-00 20pks/ctn B520-01 20pks/ctn B521-01 20pks/ctn Quick Tray 1 Pilaster bulk pack Pack Includes: 100 pilasters, 200 hook dowels and» 200 screws 1 Pilaster System Pack Pack Includes: 4 pilasters, 8 hook dowels and 8 screws 1-1/4 Pilaster System Pack Pack Includes: 4 pilasters, 8 hook dowels and 8 screws 1 Pilaster System Pack Pack Includes: 4 pilasters, 8 hook dowels and 8 screws 1-1/4 Pilaster System Pack Pack Includes: 4 pilasters, 8 hook dowels and 8 screws BALL BEARING Cream T-501-02 100pc/ctn T-502-02 100pc/ctn 1-1/4 Support Pilaster with 0.25 Standoff 1-1/4 Support Pilaster with 0.325 Standoff EPOXY Accessories: White 530117 2000pc/ctn EXE001 2000pc/ctn 7/8 Plastic Spacer 1-7/8 overall width 1-3/8 CC holes 3/4 Spacer with 32mm holes Beige Zinc B-400-02 100pc/pk 10pks/ctn T-506 100pc/ctn Drawer Bumper for Rollout Tray 11/16 (18mm) *Recommended screw: 6X7160-B Hook Dowels 247
Economy Self-Closing Epoxy Slide 2000 Series 9000-LH 100pcs/bag 500pcs/ctn 9000-RH 100pcs/bag 500pcs/ctn Left Hand Rear Socket Right Hand Rear Socket Heavy duty plastic construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment #6 pan head wood screw recommended for installation Load Rating 100lb Travel 3/4 extension Profile Height 1-7/16 Mounting Style Side or bottom mounting for frameless and face frame cabinetry Hole Pattern 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #6 undercut screw recommended) Clearance 1/2 side spacing Material 1.0mm hot rolled steel Finish Epoxy powdercoated cream white Roller POM synthetic plastic Release Captive right channel reduces side play. Positive lock-out on both members. Disconnects via lift out. Detent Self-closing with positive stop prevents drawer bounce-back and roll-out 2030CL/CR 12 Bulk Pack Cabinet Member - Cream White 100pcs/ctn 2030DL/DR 12 Bulk Pack Drawer Member - Cream White 100pcs/ctn 2030 12 (300mm) Builder Pack - Cream White 25 sets/ctn 2035CL/CR 14 Bulk Pack Cabinet Member - Cream White 100pcs/ctn 2035DL/DR 14 Bulk Pack Drawer Member - Cream White 100pcs/ctn 2035 14 (350mm) Builder Pack - Cream White 25 sets/ctn 2040CL/CR 16 Bulk Pack Cabinet Member - Cream White 100pcs/ctn 2040DL/DR 16 Bulk Pack Drawer Member - Cream White 100pcs/ctn 2040 16 (400mm) Builder Pack - Cream White 25 sets/ctn 2045CL/CR 18 Bulk Pack Cabinet Member - Cream White 100pcs/ctn 2045DL/DR 18 Bulk Pack Drawer Member - Cream White 100pcs/ctn 2045 18 (450mm) Builder Pack -Cream White 25 sets/ctn 2050CL/CR 20 Bulk Pack Cabinet Member - Cream White 100pcs/ctn 2050DL/DR 20 Bulk Pack Drawer Member - Cream White 100pcs/ctn 2050 20 (500mm) Builder Pack - Cream White 25 sets/ctn 2055CL/CR 22 Bulk Pack Cabinet Member - Cream White 100pcs/ctn 2055DL/DR 22 Bulk Pack Drawer Member - Cream White 100pcs/ctn 2055B 22 (550mm) Builder Pack -Cream White 25 sets/ctn 248
Hole Pattern and Length Specifications Economy Self-Closing Epoxy Slide DRAWER MEMBER 100 9.5 45 8.5 12.3 10 10 34 A 10 B 10 C 10 15 Specifications L A B C 22 550 235 235 102 20 500 210 210 53 18 450 185 185-16 400 160 160-14 350 135 135-12 300 110 110 - CABINET MEMBER 36 CL HR2000 35 67 163 5.5X8 5.5 6.5 259 A Specifications A 22 515 20 451 18 387 16 355 14 323 12-249
Self-Closing Epoxy Slide 5000 Series 9000-LH 100pcs/bag 500pcs/ctn 9000-RH 100pcs/bag 500pcs/ctn Left Hand Rear Socket Right Hand Rear Socket Heavy duty plastic construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment #6 pan head wood screw recommended for installation Load Rating 100lb, ANSI/BHMA Grade 1 Travel 3/4 extension Profile Height 1-7/16 Mounting Style Side or bottom mounting for frameless and face frame cabinetry Hole Pattern 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #6 undercut screw recommended) Clearance 1/2 side spacing Material 1.0mm hot rolled steel Finish Epoxy powdercoated cream white (5000 series) or brown (5500 series) Roller POM synthetic plastic, cylindrically ground for smooth and quiet action Release Captive right channel reduces side play. Positive lock-out on both members. Disconnects via lift out. Detent Self-closing with positive stop prevents drawer bounce-back and roll-out Cream White Brown 5030CL/CR 12 Bulk Pack Cabinet Member 100pcs/ctn 5030DL/DR 12 Bulk Pack Drawer Member 100pcs/ctn 5035CL/CR 14 Bulk Pack Cabinet Member 100pcs/ctn 5514CL/CR 14 Bulk Pack Cabinet Member 100pcs/ctn 5035DL/DR 14 Bulk Pack Drawer Member 100pcs/ctn 5514DL/DR 14 Bulk Pack Drawer Member 100pcs/ctn 5035 14 (350mm) Builder Pack 25 sets/ctn 5040CL/CR 16 Bulk Pack Cabinet Member 100pcs/ctn 5516CL/CR 16 Bulk Pack Cabinet Member 100pcs/ctn 5040DL/DR 16 Bulk Pack Drawer Member 100pcs/ctn 5516DL/DR 16 Bulk Pack Drawer Member 100pcs/ctn 5040 16 (400mm) Builder Pack 25 sets/ctn 5045CL/CR 18 Bulk Pack Cabinet Member 100pcs/ctn 5518CL/CR 18 Bulk Pack Cabinet Member 100pcs/ctn 5045DL/DR 18 Bulk Pack Drawer Member 100pcs/ctn 5518DL/DR 18 Bulk Pack Drawer Member 100pcs/ctn 5045 18 (450mm) Builder Pack 25 sets/ctn 5050CL/CR 20 Bulk Pack Cabinet Member 100pcs/ctn 5520CL/CR 20 Bulk Pack Cabinet Member 100pcs/ctn 5050DL/DR 20 Bulk Pack Drawer Member 100pcs/ctn 5520DL/DR 20 Bulk Pack Drawer Member 100pcs/ctn 5050 20 (500mm) Builder Pack 25 sets/ctn 5055CL/CR 22 Bulk Pack Cabinet Member 100pcs/ctn 5522CL/CR 22 Bulk Pack Cabinet Member 100pcs/ctn 5055DL/DR 22 Bulk Pack Drawer Member 100pcs/ctn 5522DL/DR 22 Bulk Pack Drawer Member 100pcs/ctn 5055 22 (550mm) Builder Pack 25 sets/ctn 5060CL/CR 24 Bulk Pack Cabinet Member 100pcs/ctn 5060DL/DR 24 Bulk Pack Drawer Member 100pcs/ctn 250
Hole Pattern and Length Specifications Self-Closing Epoxy Slide DRAWER MEMBER 100.00 10 10 9.5 8.5 12.3 A 10 B 10 C 10 10 15 Specifications L A B C 24 600 175 160 175 22 550 235 235-20 500 210 210-18 450 185 185-16 400 160 160-14 350 135 135-12 300 110 110 - CABINET MEMBER 36 CL HR5000 35 67 163 5.5X8 5.5 6.5 259 A Specifications A 24 515 22 515 20 451 18 387 16 355 14 323 12-251
Premium Self-Closing Epoxy Slide 9600 Series Load Rating 100lb+ Travel 3/4 extension Profile Height 1-7/16 Mounting Style Side or bottom mounting for frameless and face frame cabinetry Hole Pattern 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #6 undercut screw recommended) Clearance 1/2 side spacing Material 1.3mm cold rolled steel Finish Epoxy double refined powdercoated cream white Roller POM synthetic plastic, cylindrically ground for smooth and quiet action Release Captive right channel reduces side play. Positive lock-out on both members. Disconnects via lift out. Detent Self-closing with positive stop prevents drawer bounce-back and roll-out 9645 18 (450mm) Builder Pack- -Cream White 25 sets/ctn 9650 20 (500mm) Builder Pack- -Cream White 25 sets/ctn 9655 22 (550mm) Builder Pack- -Cream White 25 sets/ctn 9600-LH 100pcs/bag 500pcs/ctn 9600-RH 100pcs/bag 500pcs/ctn Left Hand Rear Socket Right Hand Rear Socket Heavy duty plastic construction Mounts to rear cabinet wall - slotted holes allow vertical and horizontal adjustment #6 pan head wood screw recommended for installation 252
Hole Pattern and Length Specifications Premium Self-Closing Epoxy Slide DRAWER MEMBER D C A B Specifications A B C D 22 413 102 235 235 20 413 53 210 210 18 - - 185 185 CABINET MEMBER A B Specifications A B 22 483 515 20 419 451 18 355 387 253
Self-Closing Double Captive Epoxy Slide 9400/9500 Series Load Rating 100lb Travel 3/4 extension Profile Height 1-5/8 Mounting Style Side or bottom mounting for frameless and face frame cabinetry Hole Pattern 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #6 undercut screw recommended) Clearance 1/2 side spacing Material 1.0mm cold rolled steel Finish Epoxy powdercoated cream white Roller POM synthetic plastic, cylindrically ground for smooth and quiet action Release Double captive (left and right channels) reduces side play for on-track precision across the entire length of the slide. Positive lock-out on both members. Disconnects via lift out. Detent Self-closing with positive stop prevents drawer bounce-back and roll-out 9416CL/CR 16-3/8 (416mm) Bulk Pack Cabinet Member - Cream White 100pcs/ctn 9400DL/DR 15-3/4 (400mm) Bulk Pack Drawer Member - Cream White 100pcs/ctn 9476CL/CR 18-3/4 (476mm) Bulk Pack Cabinet Member - Cream White 100pcs/ctn 9450DL/DR 17-3/4 (450mm) Bulk Pack Drawer Member - Cream White 100pcs/ctn 9500CL/CR 19-3/4 (500mm) Bulk Pack Cabinet Member - Cream White 100pcs/ctn 9500DL/DR 19-3/4 (500mm) Bulk Pack Drawer Member - Cream White 100pcs/ctn 9572CL/CR 22-1/2 (572mm) Bulk Pack Cabinet Member - Cream White 100pcs/ctn 9550DL/DR 21-5/8 (550mm) Bulk Pack Drawer Member - Cream White 100pcs/ctn 254 8000L 100pcs/bag 500pcs/ctn 8000R 100pcs/bag 500pcs/ctn 8001L 100pcs/bag 500pcs/ctn 8001R 100pcs/bag 500pcs/ctn Left Hand Adjustable Socket with Dowels Right Hand Adjustable Socket with Dowels Left Hand Adjustable Socket Right Hand Adjustable Socket Heavy duty plastic construction Mounts to rear cabinet wall via dowel insertion into predrilled 10mm holes Bracket has 1/4 of horizontal adjustment Heavy duty plastic construction Mounts to rear cabinet wall - #6 pan head wood screw recommended for installation Bracket has 1/4 of horizontal adjustment Rear mounting holes are slotted to allow an additional 3/8 of horizontal and vertical adjustment
Self-Closing Double Captive Epoxy Slide Hole Pattern and Length Specifications DRAWER MEMBER L C A B Specifications L A B C 22 235 235 245 550 20 210 210 220 500 18 185 185 195 450 16 160 160 170 400 CABINET MEMBER A Specifications A 22 515 20 451 18 387 16 355 255
Non Self-Closing Double Captive Epoxy Slide 4000 Series Load Rating 100lb Travel 3/4 extension Profile Height 1-7/16 Mounting Style Side mounting for frameless and face frame cabinetry Hole Pattern 32mm system hole pattern accepts European and wood screws (6.3mm Euro screw or #6 undercut screw recommended) Clearance 1/2 side spacing Material 1.0mm cold rolled steel Finish Epoxy powdercoated cream white Roller POM synthetic plastic, cylindrically ground for smooth and quiet action Release Double captive (left and right channels) reduces side play for on-track precision across the entire length of the slide. Positive lock-out on both members. Disconnects via lift out. Detent Non self-closing 4050CL/CR 19-3/4 (500mm) Bulk Pack Cabinet Member - Cream White 100pcs/ctn 4058CL/CR 22-5/8 (575mm) Bulk Pack Cabinet Member - Cream White 100pcs/ctn *Compatible with 5000 Series Drawer Members 6000 100pr/bag 250pr/ctn 6001 100pr/bag 250pr/ctn Left and Right Hand Adjustable Brackets with Dowels Left and Right Hand Adjustable Brackets Heavy duty plastic construction Mounts to rear cabinet wall via dowel insertion into predrilled 10mm holes Bracket has 1/2 of horizontal adjustment Heavy duty plastic construction Mounts to rear cabinet wall - #6 pan head wood screw recommended for installation Bracket has 1/2 of horizontal adjustment 256
Non Self-Closing Double Captive Epoxy Slide Hole Pattern and Length Specifications CABINET MEMBER 257
Shelf Supports Angled 5mm Pin Diameter Solid steel construction 3/4 long arm Available in carton of 1000pcs With Almond Sleeve With Diamond Hole Standard With 1/8 Hole With Brown Sleeve With White Sleeve With Clear Sleeve Antique Brass 1706AB 1707AB 1708AB Antique Copper 1707AC 1708AC 1710AC Black 1707BLK 1720BLK-SP* Bright Nickel 1706BN 1707BN 1708BN 1708WBN 1708CBN 1710BN Polished Brass 1706PB 1707PB 1708APB 1710PB 1000pc/ctn 1000pc/ctn 1000pc/ctn 1000pc/ctn 1000pc/ctn 1000pc/ctn 1000pc/ctn * WITH HIGH BACK 1/4 Pin Diameter Solid steel construction 3/4 long arm Available in carton of 1000pcs Standard With 1/8 Hole With Brown Sleeve With Brown Sleeve & 7/8 Long Arm With Brown Sleeve & 1/8 Hole Antique Brass 1609AB 1610AB Antique Copper 1610AC 1611AC 1915AC Bright Nickel 1609BN 1610BN Polished Brass 1609PB 1610PB 1611PB 1611PB-H 1000pc/ctn 1000pc/ctn 1000pc/ctn 1000pc/ctn 1000pc/ctn 258
Shelf Supports Spoon 3mm Pin Diameter Bright Nickel Spoon 1103BN 1000pc/box 10.000pcs/master Solid steel construction Available in carton of 1000pcs and 10,000pcs master carton 5mm Pin Diameter Spoon Spoon with Anti-Slide Barb Grommet Antique Brass 1306AB 1283AB Antique Copper 1306AC Black 1306BLK 1283BLK Bright Nickel 1306BN 1306BN-2 1283BN Polished Brass 1306PB 1283PB 1000pc/box 6000pc/master 1000pc/box 6000pc/master 1000pc/box 5000pc/master Solid steel construction Anti-slide barb cuts into shelf and prevents shelf movement (1306BN-2) Available in carton of 1000pcs and 6000pcs master carton Grommets available in carton of 1000pcs and 5000pcs master carton 1/4 Pin Diameter Spoon Grommet Antique Brass 1206AB 1284AB Antique Copper 1206AC 1284AC Black 1206BLK 1284BLK Bright Nickel 1206BN 1284BN Polished Brass 1206PB 1284PB 1000pc/box 6000pc/master 1000pc/box 5000pc/master Solid steel construction Available in carton of 1000pcs and 6000pcs master carton Grommets available in carton of 1000pcs and 5000pcs master carton Brown Plastic Sleeve 101BRN 1000pc/ctn Durable synthetic rubber Can be used on any plated finish Available in carton of 1000pcs 259
Shelf Supports 5mm Pins 16mm Duplo 24mm Straight 30mm Straight 45mm Straight Antique Copper 1401AC Bright Nickel 1402BN 418BN 1400BN Zinc 1401ZN 1402ZN 1000pc/ctn 1000pc/ctn 1000pc/ctn 1000pc/ctn Solid steel construction Available in carton of 1000pcs Plastic Shelf Locks Highly durable synthetic plastic construction Available in a variety of pin diameters and shelf thickness combinations 5mm Pin 1/2 Shelf 5mm Pin 5/8 Shelf 5mm Pin 3/4 Shelf 1/4 Pin 5/8 Shelf 1/4 Pin 3/4 Shelf Clear 7703CL 7704CL 7705CL 8704CL 8705CL White 7705WH 1000pc/box 3500pcs/master 1000pc/box 4000pcs/master 2500pc/box 5000pcs/master 1000pc/box 3500pcs/master 1000pc/box 3500pcs/master Heavy Duty Plastic Shelf Lock Clear 5mm Double Pin 3/4 or 1 Shelf 7706CL 2000pc/ctn Highly durable synthetic plastic construction Fits 3/4 or 1 shelf thickness Two pins are 32mm spaced 260
Shelf Supports Zinc Supports - 5mm Pin Plastic Supports - 5mm Pin 90 Angled Support Solid zinc die cast construction Available in carton of 1000pcs Support with 5mm Shelf Hold Pin Zinc 1540ZN 1545ZN 1000pc/ctn 1000pc/ctn Almond Brown Clear White Support 1438ALM 1438BRN 1438CL 1438WH 1000pc/box 5000pcs/master Synthetic injection molded plastic with steel pin Available in carton of 1000pcs and 5000pcs master carton Standards & Clips Single track standards fit in 5/8 wide groove Standards quickly install using nails or screws (not included) Available in a variety of sizes which can also be cut to length Clips snap into place in 3/8 increments for a secure fit and can be easily removed and reattached. Standard Clip Bulk Pack Standard Clip Builder Pack Brass 460BR 1460BR 1460BR-R Standard Clip Retail Pack 48 Standard 60 Standard 72 Standard 96 Standard Brown 1460AC 1460AC-R TRK01-48BRN TRK01-60BRN TRK01-72BRN TRK01-96BRN Nickel/ Zinc 460NI 1460NI 1460ZN-R TRK01-48ZN TRK01-60ZN TRK01-72ZN TRK01-96ZN White 1460WH 1460WH-R TRK01-48WH TRK01-60WH TRK01-72WH TRK01-96WH 2500pc/ctn 1000pc/ctn 10pc/pack 100pks/ctn 20pc/ctn 20pc/ctn 20pc/ctn 20pc/ctn 261
Decorative Hinges Self-Closing Overlay Hinge - Face Frame Mount 0.492" 0.461" 2.114" 2.756" 1.516" 0.945" DOOR WING FRAME WING 1.197" Bulk Pack Retail Pack Antique Brass P5011AB Black Powder Coat H5011BLK Brushed Dull Nickel H5011BNBDL Burnished Brass H5011BB P5011BB Dark Antique Copper Machined H5011DACM P5011DACM Dark Brushed Antique Copper H5011DBAC P5011DBAC Polished Brass H5011PB P5011PB Polished Chrome H5011PC P5011PC Satin Nickel H5011SN P5011SN White P5011WH 125pr/ctn 1pr/polybag 100pks/ctn Traditional overlay hinge with semiconcealed frame wing Steel construction with reliable power pack for firm self-closure #5 x 5/8 oval head screw recommended for face frame attachment and #6 x 1/2 flat head screw recommended for door attachment Retail packs are polybagged with UPC label and contain: 2 hinges, 4 finished screws for face frame attachment, 6 finished screws for door attachment, and 2 door bumpers 3/8 Inset Hinge - Face Frame Mount 0.815" 0.512" 0.39" 2.114" 2.756" 1.496" 0.925" 0.394" 1.602" FRAME WING DOOR WING Antique Brass Burnished Brass Dark Antique Copper Machined Dark Brushed Antique Copper Polished Brass Polished Chrome Satin Nickel Bulk Pack H5922BB 125pr/ctn Retail Pack P5922AB P5922DACM P5922DBAC P5922PB P5922PC P5922SN 1pr/polybag 100pks/ctn Traditional 3/8 inset hinge with semiconcealed frame wing Steel construction with reliable power pack for firm self-closure #5 x 5/8 oval head screw recommended for face frame attachment and #6 x 1/2 flat head screw recommended for door attachment Retail packs are polybagged with UPC label and contain: 2 hinges, 4 finished screws for face frame attachment, 6 finished screws for door attachment, and 2 door bumpers 262
Decorative Hinges Self-Closing Full Wrap Around Hinge - 3 Hole Door Mount, 1/2 Overlay 0.35" 0.512" 0.531" 2.268" 1.133" 1.26" 0.945" DOOR WING 0.48" 0.965" 1.079" FRAME WING For 3/4 frame and 1/2 overlay applications Antique Brass Burnished Brass Polished Brass Satin Nickel Bulk Pack H6541AB H6541BB H6541PB H6541SN 100pr/ctn Steel construction with reliable power pack for firm self closure #6 x 5/8 flat head screw recommended for fast singlepoint attachment to face frame and #6 x 1/2 flat head screws recommended for door attachment Slotted face frame hole provides vertical adjustment Full Wrap Around Hinge - 2 Hole Door Mount, 1/2 Overlay 0.531" 2.268" 1.516" 1.136" 1.134" 0.982" DOOR WING 0.48" 0.965" 1.402" FRAME WING Burnished Brass Satin Nickel Bulk Pack H6441BB H6441SN 100pr/ctn For 3/4 frame and 1/2 overlay applications Steel construction with reliable power pack for firm self closure #6 x 5/8 flat head screw recommended for fast singlepoint attachment to face frame and #6 x 1/2 flat head screw recommended for door attachment Slotted face frame and door holes provide horizontal and vertical adjustment 263
Decorative Hinges Self-Closing Partial Wrap Around Hinge - 3 Hole Door Mount, 1/2 Overlay 0.465" 0.394" 0.531" 0.512" 2.268" 1.457" 1.26" 0.945" DOOR WING 0.776" 1.102" FRAME WING For 3/4 frame and 1/2 overlay applications Steel construction with reliable power pack for firm self closure Burnished Brass Bulk Pack H7441BB 200pr/ctn #6 x 5/8 flat head screw recommended for attachment to face frame and #6 x 1/2 flat head screw recommended for door attachment Slotted face frame holes provide vertical adjustment Partial Wrap Around Hinge - 2 Hole Door Mount, 1/2 Overlay 0.465" 0.531" 2.268" 1.457" 1.516" 0.992" DOOR WING 0.419" 1.402" FRAME WING 0.776" Burnished Brass Bulk Pack H5349BB 125pr/ctn For 3/4 frame and 1/2 overlay applications Steel construction with reliable power pack for firm self closure #6 x 5/8 flat head screw recommended for attachment to face frame and #6 x 1/2 flat head screw recommended for door attachment Slotted face frame and door holes provide horizontal and vertical adjustment Conforms to ANSI/BHMA for Grade 2 264
Full Wrap Around Hinge - Full Inset Decorative Hinges Non Self-Closing 3/4" FRAME WING DOOR WING For 3/4 frame and 3/4 door, 270 opening For full inset frame applications Stylish ball tips for shaker style cabinets with raised panel doors Antique Brass Dark Brushed Antique Copper Matte Black Satin Nickel Bulk Pack 0128AB 0128DBAC 0128MB 0128SN 250pc/ctn Non-mortise hinge quickly installs and yields minimal door gap #6 x 5/8 flat head screw recommended for attachment to frame and #6 x 1/2 flat head screw recommended for door attachment Slotted holes provide horizontal and vertical adjustment Full Wrap Around Hinge - Full Inset 3/4" FRAME WING DOOR WING Dark Brushed Antique Copper Polished Nickel Satin Nickel Bulk Pack 0138DBAC 0138NI 0138SN 20pc/box 200pc/master For 3/4 frame and 3/4 door, 270 opening For full inset frame applications Stylish minaret tips for shaker style cabinets with raised panel doors Non-mortise hinge quickly installs and yields minimal door gap #6 x 5/8 flat head screw recommended for attachment to frame and #6 x 1/2 flat head screw recommended for door attachment Slotted holes provide horizontal and vertical adjustment Designed for use with Jeffrey Alexander cabinet latch (item # CL101) 265
Decorative Hinges Non Self-Closing Full Wrap Around Hinge - Offset Bifold 3/4" FRAME WING DOOR WING For 3/4 frame and 3/4 door, 180 opening For offset applications Non-mortise hinge quickly installs and yields minimal door gap Polished Brass Bulk Pack 9915PB 400pc/ctn #6 x 5/8 flat head screw recommended for attachment to frame and #6 x 1/2 flat head screw recommended for door attachment Slotted holes provide horizontal and vertical adjustment Partial Wrap Around Hinge - Full Inset 0.75" FRAME WING 0.75" FRAME WING DOOR WING Antique Brass Dark Brushed Antique Copper Matte Black Satin Nickel Bulk Pack 0148AB 0148DBAC 0148MB 0148SN 250pc/ctn For 3/4 frame and 3/4 door, 270 opening For full inset face frame applications Stylish minaret tips for shaker style cabinets with raised panel doors Non-mortise hinge quickly installs and yields minimal door gap #6 x 5/8 flat head screw recommended for attachment to frame and #6 x 1/2 flat head screw recommended for door attachment Slotted holes provide vertical adjustment 266
Partial Wrap Around Hinge - Full Inset Decorative Hinges Non Self-Closing 0.75" 0.75" FRAME WING FRAME WING DOOR WING Dark Brushed Antique Copper Polished Nickel Satin Nickel Bulk Pack 0158DBAC 0158NI 0158SN 50pc/box 300pc/master Tall Partial Wrap Around Hinge - Full Inset For 3/4 frame and 3/4 door, 270 opening For full inset face frame applications Minaret tips for shaker style cabinets with raised panel doors Non-mortise hinge quickly installs and yields minimal door gap #6 x 5/8 flat head screw recommended for attachment to frame and #6 x 1/2 flat head screw recommended for door attachment Slotted holes provide vertical adjustment Designed for use with Jeffrey Alexander cabinet latch (item # CL101) 0.75" FRAME WING 0.75" FRAME WING DOOR WING Dark Brushed Antique Copper Polished Nickel Satin Nickel Bulk Pack 0178DBAC 0178NI 0178SN 50pc/box 200pc/master For 3/4 frame and 3/4 door, 270 opening For full inset face frame applications Minaret tips for shaker style cabinets with raised panel doors Non-mortise hinge quickly installs and yields minimal door gap #6 x 5/8 flat head screw recommended for attachment to frame and #6 x 1/2 flat head screw recommended for door attachment Slotted holes provide vertical adjustment Designed for use with Jeffrey Alexander cabinet latch (item # CL101) 267
Institutional Hinges 5 Knuckle Overlay Hinge 3/4 SIDE PANEL Side Panel Door Thickness 3/4 (19mm) 13/16 (20.6mm) Hinge Overlay 23/32 (18.3mm) Door Overlay 15/32 (11.9mm) Reveal 9/32 (7.1mm) DOOR 13/16" 7/16 Material Thickness 0.095 (2.4mm) Opening Angle 270 11/16 Conforms to ANSI/BHMA Grade 1 Requirements Black Powder Coat Dull Chrome (26D) Stainless Steel (304) Bulk Pack HR0076BLK HR0076 HR0076SS 1pc/bag 108pc/box Precise and consistent tooling Hospital tips, 2-3/4 overall height Drilled knuckle inner diameter 32mm system hole pattern with 37mm setback Countersunk screw holes for recommended #8 flat head or Euro screws Slotted screw holes for vertical and horizontal adjustment Single Pivot Hinge 3/4" Side Panel 3/4 (19mm) SIDE PANEL Door Thickness 3/4-13/16 (19-21mm) Hinge Overlay 3/4 (19mm) Door Overlay 19/32 (15mm) Reveal 5/32 (4mm) Opening Angle 270 13/16 Cup Bore Dowels 35mm dia x 13mm depth 45mm Centers x 8mm dia DOOR Nickel Bulk Pack HR0086 100pcs/ctn Solid zinc die cast construction For full overlay applications 2 dimensional adjustment Hinge and plate ship pre-assembled Cup ships with 8mm dowels Integrated polymer catch with positive lock Conforms to ANSI/BHMA Grade 1 Requirements 268
Institutional Hinges 3 Knuckle Heavy Duty Hinge 3/4 Side Panel 3/4 (19mm) SIDE PANEL Door Thickness 3/4 (19mm) Hinge Overlay 23/32 (18.3mm) Door Overlay 15/32 (11.9mm) DOOR 3/4" 9/16 Reveal Material Thickness 9/32 (7.1mm) 0.074 (1.9mm) 3/4 Opening Angle 270 Precise and consistent tooling Decorative ball tips, 2-5/16 overall height Drilled knuckle inner diameter Black Powder Coat Bright Nickel Bulk Pack 9975BLK 9975BN 100pc/ctn 32mm system hole pattern Countersunk screw holes for recommended #6 flat head screws Slotted screw holes for vertical and horizontal adjustment 3 Knuckle Medium Duty Hinge 3/4 Side Panel 3/4 (19mm) SIDE PANEL Door Thickness 3/4 (19mm) Hinge Overlay 23/32 (18.3mm) Door Overlay 15/32 (11.9mm) DOOR 3/4" 9/16 Reveal Material Thickness 9/32 (7.1mm) 0.071 (1.8mm) 3/4 Opening Angle 270 Polished Brass Bulk Pack 9925PB 300pc/ctn Precise and consistent tooling Decorative ball tips, 3-1/8 overall height Countersunk screw holes for recommended #6 flat head screw Slotted screw holes for vertical and horizontal adjustment 269
Cabinet & Drawer Accessories Pivot Hinge Commonly used in kitchen cabinet door display units Black Powder Coat Polybag Pack 1063BLK 500pks/ctn Fits 1/2 or 5/8 doors 5mm diameter pin x 8mm length Each pack contains 2 hinges, 2 eyelets and 4 screws Continuous (Piano) Hinge Boxed Bright Nickel 5414 Polished Brass 5413 Recommended screw: #6 flat head 25pc/ctn 21 gauge steel (0.035 ) 1-1/2 open width, 11/16 leaf width Ships in 6 pieces 2 hole spacing, 1/4 knuckle length False Front Clips Designed to attach finished cabinet fronts to cabinet openings with little or no usage Perfect for sink base cabinets in kitchens and bathrooms 18.25mm 21mm Extended Roller/Spacer Black Plated FFC11BLK FFC12BLK White FFS11 Recommended screw: #6 flat head #6 flat head 5000pcs/ctn 2500pcs/ctn 5000pcs/ctn 270
Hanging File Rod & Clips Cabinet & Drawer Accessories Easy and fast install no cutting or grooving is necessary Steel bars and clips are dependable and stand the test of time Top-mount or side-mount clip attachment Hanging file bar cross rail can be cut to length and fits 1/2 and 5/8 clips Coordinates well with Hardware Resources Custom Dovetail Drawer Boxes 092182BLK 1296ZN Black Plated 1/4 diameter steel x 11-7/8 length file rod 092182BLK* 3mm thick x 1/2 tall x 96 length file bar File bar clip for 1/2 drawer side material File bar clip for 5/8 drawer side material Zinc Plated 1296ZN NEW 464ZN 580ZN NEW Recommended screw: #6 pan head #6 pan head 200pcs/ctn *Can only be used with clip for 1/2 material 10 sticks/ctn 1000pcs/ctn 100pcs/box 1000pcs/master ctn 271
Cabinet & Drawer Accessories Door Bumpers Height Diameter Material Color HR7438 320pcs/sheet 20,000pcs/ctn 3/32 3/8 Rubber Black 85303CL 200pcs/sheet 5000pcs/ctn 5mm 1/2 Transparent Polyurethane Clear Quick and versatile installation using adhesive backing Can be used on a wide variety of doors and drawers 85101CL 200pcs/sheet 5000pcs/ctn 85202CL 450pcs/sheet 5400pcs/ctn 3.5mm 7/16 2.2mm 5/16 Transparent Polyurethane Transparent Polyurethane Clear Clear 85303CL specially designed for cabinet hinges; soft-durometer two stage impact resistance greatly reduces noise Locks 32mm 1-7/8 5/8 7/8 Zinc Die Cast Drawer Lock Brass Keyed Alike 1060BR Chrome Keyed Different 1060CH 1pc/bag 250pcs/ctn Standard 7/8 (22mm) length with straight cam Screws mount on 35mm center 180 angle of rotation 2 keys included per bag 1-1/8 Zinc Die Cast Drawer Lock Chrome Keyed Alike 68639CH Chrome Keyed Different 68639CHKD 1pc/bag 200pcs/ctn Standard 1-1/8 (28mm) length with fork cam. Also packed with 3/8 offset cam for flush applications Body mounts with hex nut and prong washer into 3/4 (19mm) diameter hole 90 angle of rotation 2 keys included per bag For plastic, metal or wood applications Strike Plate for Cam Locks Bright Nickel 7000201BN Recommended screw: 1-7/8 #8 washer head 500pcs/ctn Long-lasting steel construction Screw-on mount 272
Catches Magnetic Catches 8lb Single Polybagged 15lb Single Polybagged 15lb Single Retail Pack 15lb Single Bulk Pack Brown/Bronze 50635 50632 50632-R 50636 White/Polished Brass 50633 50634 White/White 50639 White/Zinc 50631 50631-R 50630 Pack Contents 1 strike plate, 1 catch, 1pc #5 x 5/8 flat head, 2pcs #6 x 3/4 pan head 100pks/box 1000pks/master 1 strike plate, 1 catch, 1pc #5 x 5/8 flat head, 2pcs #6 x 3/4 pan head 100pks/box 1000pks/master 1 strike plate, 1 catch, 1pc #5 x 5/8 flat head, 2pcs #6 x 3/4 pan head 65pks/box 520pks/master 1000 catches 1000 strike plates 1000 flat head 2000 pan head 15lb Double Polybagged 15lb Double Retail Packed 25lb Single Polybagged 25lb Single Bulk Pack Brown/Bronze 50622 50622-R 50652 White/Polished Brass 50623 50653 50654 White/Zinc 50621 50621-R 50651 50650 Pack Contents 2 strike plates, 1 catch, 2pcs #5 x 5/8 flat head, 2pcs #6 x 3/4 pan head 100pks/box 600pks/master 2 strike plates, 1 catch, 2pcs #5 x 5/8 flat head, 2pcs #6 x 3/4 pan head 40pks/box 320pks/master 1 strike plate, 1 catch, 1pc #5 x 5/8 flat head, 2pcs #6 x 3/4 pan head 50pks/box 500pks/master 500 catches 500 strike plates 500 flat head 1000 pan head 273
Catches Roller Catches Elbow Catches Dark Brushed Antique Copper Polished Brass Retail Packed RC01-DBAC RC01-PB Dark Brushed Antique Copper Polished Brass Retail Packed EC01-DBAC EC01-PB Zinc Pack Contents RC01-ZN 1 catch, 1 strike, 4 screws 400pks/ctn Double roller catch with durable nylon rollers Roller measures 33mm wide x 28mm deep x 14mm tall Mounting holes are 24mm center to center 4pcs pan head wood screws included Bagged with catch, strike and screws with UPC label for retail sale Zinc Pack Contents EC01-ZN 1 catch, 1 strike, 4 screws 125pks/box 500pks/master Steel construction Catch measures 28mm wide x 26mm tall Strike plate measures 27mm long x 12mm wide Catch mounting holes are 17mm center to center 4pcs pan head wood screws included Bagged with catch, strike and screws with UPC label for retail sale Magnetic Touch Latches Rectangular Strike Plate Length 1-3/16 Width 7/8 Overall Height 18mm Base Length Base Width 33mm 28mm Bronze 506S2 Extended Overall Length Retracted Overall Length 51mm 41mm White 506S4 Hole Spacing 18mm Zinc 506S1 Black 506L2 Recommended screw: #5 x 5/8 flat head White 506L1 500pcs/box 3000pcs/master Recommended screw: #6 x 3/4 pan head 600pcs/ctn 274
Catches Button Catches Reverse Clip L Mount Inside Clip Button Polished Brass 50604 50614 Zinc 50600 50610 506B0 Recommended screw: #5 x 5/8 flat head #5 x 5/8 flat head 100 receivers +» 100 buttons/box 500 receivers +» 500 buttons/master 100 receivers +» 100 buttons/box 500 receivers +» 500 buttons/master 5000 buttons/ctn Louvers 3/8 11/16 3/8 1/4 1/8 1/4 1-1/16 Flange Bushing Louver Pin Clear LP5000 Nylon/Natural LP1000 20M/ctn 15M/ctn 275
Shutter Hinges Non-Mortise Fixed Pin 2 2-1/2 3-1/2 11-16 7/8 1 1/2 1 2 Flat Back 2-1/2 Flat Back 3-1/2 Swaged 3 Leaf 2-1/16 Swaged Lift Off Almond 20251-ALMS Antique Brass 9800AB 9801AB 20251AB Antique Copper 9800AC 9801AC Black Bright Nickel 9800BLK 20251BN Bright White 20251BWH Brushed Chrome Dark Antique Copper Machined 20251BC 20251DACM Polished Brass 9800PB 20251PB White Recommended screw: 20251-WHS 20200WH - LH 20200WH - RH #4 x 5/8 flat head #5 x 5/8 flat head #6 x 5/8 flat head #5 x 5/8 flat head 50pcs/box 500pcs/master 50pcs/box 500pcs/master 100pcs/box 500pcs/master 100pcs/box 500pcs/master *Sold in Left Hand and Right Hand 276
Loose Pin Shutter Hinges Non-Mortise 3 3 3 3 1 1 1-1/8 1-1/8 3 Swaged 3 Swaged 3 Swaged - 1 Slot 3 Swaged - 3 Slots Almond 9500ALM 9802ALM 9805ALM 9806ALM Antique Brass 9500AB 9802AB 9805AB 9806AB Bright Nickel 9500BN 9802BN 9805BN 9806BN Bright White 9500BWH 9802BWH 9805BWH Brushed Chrome 9500BC 9802BC Dark Antique Copper Machined Dull White 9500DACM 9802DACM 9805DACM 9806DACM 9500WH-D Polished Brass 9500PB 9802PB 9805PB White 9500WH 9802WH 9805WH 9806WH Recommended screw: #6 x 5/8 flat head #6 x 5/8 flat head #6 x 5/8 flat head #6 x 5/8 flat head 50pcs/box 250pcs/master 50pcs/box 250pcs/master 50pcs/box 250pcs/master 50pcs/box 250pcs/master 277
Shutter Hinges Wrap Around Swaged 2-1/2 3 1 1 1-1/4 1-1/16 1-1/8 3/4 1-1/2 2-1/2-2 Slots 3 Non Mortise - 2 Slots Almond 54050ALM 95050ALM Antique Brass 54050AB 95050AB Bright Nickel 54050BN Bright White 54050BWH 95050BWH Brushed Chrome 54050BC Dark Antique Copper Machined Polished Brass 54050DACM 54050PB 95050DACM Prime Coat 54050PR Stainless Steel 54050SS Recommended screw: #6 x 3/4 flat head #6 x 3/4 flat head 50pcs/box 2500pcs/master 50pcs/box 2500pcs/master 278
Flat Back Shutter Hinges Butt Swaged 1-1/2 2-1/2 1-1/2 2-1/2 7/16 7/8 3/4 5/8 1-1/2 x 1-1/16 2-1/2 x 2 Radius Corner 1-1/2 x 1-3/4 2-1/2 x 1-1/2 Almond 33527ALM Antique Brass 20130AB 33529AB 33527AB Bright Nickel 33527BN Bright White 33529BWH 33527BWH Brushed Chrome NEW 33529BC 33527BC Dark Antique Copper Machined 33529DACM 33527DACM Polished Brass 20130PB 33527PB Prime Coat 20160PR 33527PR Stainless Steel 33527SS White 33529WH 33527WH Recommended screw: #5 x 5/8 flat head #6 x 5/8 flat head #5 x 5/8 flat head #6 x 5/8 flat head 500pcs/box 2000pcs/master 50pcs/box 250pcs/master 250pcs/box 1000pcs/master 100pcs/box 500pcs/master 279
Shutter Hinges Butt Swaged 2-1/2 2-1/2 2-1/2 3 3/4 7/8 1-1/8 1-1/8 2-1/2 x 1-11/16 2-1/2 x 2 Radius Corner 2-1/2 x 2-1/2 3 x 2-3/4 Almond 33530ALM 33524ALM Antique Brass 33528AB 33530AB 33524AB OL33550AB Bright Nickel 33528BN 33524BN OL33550BN Bright White 33528BWH 33530BWH 33524BWH OL33550BWH Brushed Chrome NEW 33530BC 33524BC OL33550BC Dark Antique Copper Machined Off White 33530DACM 33524DACM OL33550DACM 33524OWH Polished Brass 33528PB 33530PB 33524PB OL33550PB Prime Coat 33530PR 33524PR OL33550PR Stainless Steel 33524SS OL33550SS White 33528WH 33530WH 33524WH OL33550WH Recommended screw: #6 x 5/8 flat head #6 x 5/8 flat head #6 x 3/4 flat head #8 x 3/4 flat head 100pcs/box 500pcs/master 100pcs/box 400pcs/master 50pcs/box 250pcs/master 50pcs/box 200pcs/master 280
Brackets Angled Corner Braces Hole Center to Center 1-3/8 x 1-3/8 x 3/4 1 x 1 x 1/2 1-1/2 x 1-1/2 x 1/2 2 2 x 5/8 2-1/2 x 2-1/2 x 5/8 3 x 3 x 3/4 4 x 4 x 3/4 3/4 1 1-9/16 1-13/16 2-13/16 Antique Copper 1965AC Bright Nickel 1965BN Polished Brass 9211PB 9212PB Zinc 9211 9212 9213 9214 9215 9217 Recommended screw: #8 flat head #6 or #8 flat head #6 or #8 flat head #6 or #8 flat head #6 or #8 flat head #6 or #8 flat head #6 or #8 flat head 1000pcs/ctn 500pcs/ctn 500pcs/ctn 500pcs/ctn 500pcs/ctn 250pcs/ctn 250pcs/ctn Hole Center to Center 3/4 x 3/4 x 2 32mm Black Plated 9013 Bright Nickel 9015 Plain Steel 9011 Zinc 9012 Recommended screw: #6 pan head 1000pcs/ctn 281
Brackets Flat/Mending Plates Hole Center to Center Bright Nickel 2 x 5/8 2-3/16 x 5/8 3 x 3/4 4 x 7/8 2 x 1-9/16 32mm 32mm staggered 2 sets 1-5/8 staggered 2 sets 2-3/8 staggered 2 sets 32mm horizontal slotted 32mm vertical slotted 9005BN Zinc 9313 9314 9315 9317 Recommended screw: #6 or #8 flat head #6 or #8 flat head #6 or #8 flat head #6 or #8 flat head #5 pan head 500pcs/ctn 500pcs/ctn 500pcs/ctn 500pcs/ctn 500pcs/ctn Drawer Adjustment Figure 8 Drawer Front Connecting Plate with Slotted Adjustment Figure 8 Drawer Front Connecting Plate 90 Drawer Bracket 90 Drawer Bracket Cover (Plastic) Euro Bracket Dimensions 1-11/16 1-5/16 2 x 1 x 5/8 2-1/8 x 1 x 1/2 42mm x 47mm x 23mm Hole Center to Center 15/16 5/8 11/16 horizontal slotted 11/16 vertical slotted Beige 1996 Black Plated Bright Nickel 103559BN 103841BN 9453007 Zinc Recommended screw: 32mm center to center with 16mm spacing 430BLK 430ZN #6 flat head #6 flat head #6 pan head #6 or #8 flat head or Euro screw 1000pcs/ctn 1000pcs/ctn 1000pcs/ctn 2000pcs/ctn 1000pcs/ctn 282
Plastic Brackets Dimensions Glue Block - 2 Glue Block - 3 Corner Brace Cabinet Glide - 3/8 2 Overall Length 1 Outside Width 5/16 Inside Width 3 Overall Length 1-3/8 Outside Width 1/4 Inside Width 2-5/8 x 2-5/8 3/4 Height Without Tabs 1-3/4 x 3/4 3/8 Height Drawer Bumper 11/16 (18mm) Beige T480-00 B-400-02 Natural HR410 GLIDE-02 White T480-02 T475 Recommended screw: Mirror Hanging #6 pan head 5000pcs/ctn 1800pcs/ctn 1000pcs/ctn 5000pcs/ctn 100pcs/pk 10pks/ctn Dimensions Mirror Hanging Bracket Mirror Clip Glass Retainer Clip Clip - 5/8 x 5/8 Bracket - 1-1/8 x 3/8 Mounting Holes are 1/2 Center to Center 3/4 x 5/8 Mounting Screw Preassembled 1-1/8 Overall Height 3/4 Adjustment Screw Included Antique Copper 9454003 Clear T220-01-A Zinc Recommended screw: MH1625 #6 pan head #6 pan head 5000pcs/ctn 2500pcs/ctn 2500pcs/ctn 283
Brackets Grommets Two Piece with Tab Removed Three Piece with Adjustable Spring Closure Three Piece with Adjustable Spring Closure Cover Diameter 61mm 71mm 3-1/2 Drilling Hole Diameter 1-7/8 (48mm) 2-3/8 (60mm) 3 (75mm) Height Under Cover 5/8 20mm 20mm Black 63000 68000BK 69000BK Brown Grey 68000BR 68000GR White 68000WH 69000WH 500pcs/ctn 500pcs/ctn 500pcs/ctn Stem Glass Holder Brass 9409001 Chrome 9409004 Dark Brushed Antique Copper 9409005 Satin Chrome 9409002 White 9409003 Recommended screw: #6 flat head 100pcs/ctn Thick wire gauge construction Under cabinet mount with hidden installation holes Front: 4 overall width x 11-7/16 overall length Rear: 1-3/8 overall width 284
Brackets Heavy Duty Shelf Utility Bracket 21-1/4 Extra heavy duty 1-1/4 wide steel design. Supports up to 1200lbs per pair. Thick white painted finish is durable and rust resistant. Supports shelving in a variety of residential and commercial environments: closets, garages, utility rooms, tool sheds and laundry rooms. Also a perfect support for countertops. 14 overall height x 21-1/4 overall depth. #10 x 3 pan head screws recommended for wall installation (sold separately). White NEW Recommended screw: 14 x 21-1/4 x 1-1/4 1421WH #10 pan head 1pc/box 10pcs/master ctn Shelf & Rod Support Bracket 11 Heavy duty 1 wide steel design. Supports up to 150lbs. 11-3/4 Oil Rubbed Bronze or Chrome finishes. Designed for use with Hardware Resources 15mm x 30mm Oval Closet Rods. 8 and 12 rods available in Chrome (steel) and Oil Rubbed Bronze (aluminum). 10-3/4 10-3/4 overall height x 11-3/4 overall depth (11 interior bracket depth) x 1 wide. Screws included: 2pcs #8 x 2 pan head for wall installation and #8 x 5/8 pan head for shelf installation. Oil Rubbed Bronze NEW Polished Chrome NEW 10-3/4 x 11-3/4 x 1 1530ORB 1530CH Recommended screw: screws included 1pc/box 10pcs/master ctn 285
Closet Rods Oval Closet Rods Dimensions Chrome 2.5m Oval Rod 12 Oval Rod 15mm x 30mm x 2.5m CH & SN 1.0mm Thick ORB 1.3mm Thick 15302CH STEEL 15mm x 30mm x 12 CH 1.0mm Thickness ORB 1.3mm Thickness 153012CH STEEL Knock-in Mounting Bracket 5mm Diameter Posts 32mm Center to Center 1 Hole for Extra Screw Screw-in Mounting Bracket 32mm Center to Center Holes Center Support Bracket 28mm Center to Center Holes 3 Overall Height M7160 M7175 M7190 Oil Rubbed Bronze NEW Satin Nickel Recommended screw: 15302ORB ALUMINUM 15302SN STEEL 153012ORB ALUMINUM #6 flat head (optional) 20pcs/ctn 20pcs/ctn 100pcs/box 1000pcs/master Round Closet Rods - 1-5/16 Diameter M7160-ORB M7175-ORB M7190-ORB M7160-SN M7175-SN M7190-SN #6 flat head #6 flat head 100pcs/box 1000pcs/ master 50pcs/ctn Dimensions Oil Rubbed Bronze NEW Recommended screw 8 Round Rod 1-5/16 Diameter x 8 2.0mm Wall Thickness 151696ORB ALUMINUM Open Knock in Mounting Bracket Closed Knock in Mounting Bracket 5mm Diameter Posts 32mm Center to Center 1 Hole for Extra Screw Open Screw in Mounting Bracket Closed Screw in Mounting Bracket 2-11/16 Overall Width 3 Holes for Screws Center Support Bracket 2 Center to Center Holes 3 Overall Height M7340-ORB M7345-ORB M7350-ORB M7360-ORB M7370-ORB #6 flat head (optional) screws included #6 flat head 20pcs/ctn 20pcs/ctn 20pcs/ctn 200pcs/box 1000pcs/master 200pcs/box 1000pcs/master 50pcs/ctn 286
Closet Rods Round Closet Rods - 1-1/16 Diameter Dimensions Chrome Recommended screw: 8 Round Rod 1-1/16 Diameter x 8 2.0mm Wall Thickness 111696CH STEEL Open Knock-in Mounting Bracket 5mm Diameter Posts 32mm Center to Center 1 Hole for Extra Screw Open Screw-in Mounting Bracket Closed Screw-in Mounting Bracket 2-11/16 Overall Length 2 Center to Center Holes Center Support Bracket 28mm Center to Center Holes 3 Overall Height M7240 M7250 M7260 M7270 #6 flat head (optional) 20pcs/ctn 20pcs/ctn 250pcs/box 1000pcs/master screws included 250pcs/box 1000pcs/master #6 flat head 50pcs/ctn Round Closet Rods - 1 Diameter Dimensions Oil Rubbed Bronze NEW Recommended screw: 8 Round Rod 1 Diameter x 8 1.2mm Wall Thickness 100096ORB ALUMINUM Open Knock-in Mounting Bracket 5mm Diameter Posts 32mm Center to Center 1 Hole for Extra Screw Open Screw-in Mounting Bracket Closed Screw-in Mounting Bracket 2-11/16 Overall Length 2 Center to Center Holes Center Support Bracket 2 Center to Center Holes 3 Overall Height M7240-ORB M7250-ORB M7260-ORB M7270-ORB #6 flat head (optional) 20pcs/ctn 20pcs/ctn 250pcs/box 1000pcs/master screws included 250pcs/box 1000pcs/master #6 flat head 50pcs/ctn 287
Closet Hardware Wardrobe Lift Side mount wardrobe lift with 45lb weight capacity Heavy duty steel construction with plastic housing and handle Two sizes available and width adjustable to fit a wide range of openings Handle is adjustable for different desired heights Instructions and mounting hardware included Chrome with Black Handle & Housing 25-1/2 35 33 48 1523 1 set/box 6 sets/master 1532 1 set/box 6 sets/master Recommended screw: screws included Sliding Racks Smooth Heavy Duty Slide Action Sliding Belt Rack Sliding Tie Rack Sliding Wardrobe/Valet Rod Dimensions 295mm (11-5/8 ) Overall Length 6 Belt Hooks, 50mm Spacing 295mm (11-5/8 ) Overall Length 6 Sets of Pegs to Hold 12 Ties 295mm (11-5/8 ) Overall Length Built-in Stopper on Ends Dark Brushed Antique Copper 295B-DBAC 295T-DBAC 295W-DBAC Polished Chrome 295B-PC 295T-PC 295W-PC Recommended screw: screws included screws included screws included 1 set with hardware/box 20 sets/master 1 set with hardware/box 20 sets/master 1 set with hardware/box 20 sets/master 288
Screw Information Head Types (measure length from surface of material to screw tip) SURFACE OF MATERIAL FLAT HEAD UNDERCUT HEAD NIB HEAD BUGLE HEAD OVAL HEAD PAN HEAD TRUSS HEAD WASHER HEAD LARGE WASHER HEAD Head Sizes #5 #6 #7 #8 #9 #10 #14 Flat Head 0.252 0.255 0.295 0.332 0.335 0.385 0.491 Oval Head 0.252 Pan Head 0.270 0.296 0.322 0.373 Pocket Hole/Face Frame Modified Modified Truss Head 0.384 Standard Washer Head 0.375 0.500 Large Washer Head 0.500 Drives PHILLIPS PHILLIPS POZI POZI SLOTTED SLOTTED COMBO COMBO Most common in wood applications Popular on truss head machine screws Use Phillips bit to drive Use Phillips or Flat bit to remove Allows tight engagement, prevents stripping Found on 2-piece connectors Use Pozi bit to drive Use Pozi or Flat bit to remove SQUARE Popular in hand-driven applications Allows tight engagement, prevents stripping PHILLIPS SQUARE COMBO Allows tight engagement, prevents stripping Use Square or Combo bit to drive Use Square, Combo, or Phillips bit to remove HEX Found on drivers and draw bolts TYPE 17 289
Screw Finishes Zinc White Almond Nickel BNBDL: Brushed Pewter DACM: Dark Antique Polished Brass Antique Brass Copper Machined Clear Brown Wax Black Packaging Options Keg Bucket The value package, available in our most popular screws Heavy duty and convenient way to take screws to the job site Avoid box tearing and breaking Bucket is reusable for many applications Lid securely snaps and stays in place White Box (all part #s ending in -B) Smaller order minimums 4 white inner boxes make up one master case You can purchase by the inner box or by the case Economy Pack Box Items highlighted in yellow are available in Economy packs Carton quantity is 2000 pcs To order, add -2 to the end of the part number Economy packed for lower inventory commitment Stocked in all warehouses for fast delivery on urgent jobs Select from our most popular hardware, assembly and installation screws 290
Coarse Thread Flat Head Screws Hardware Attachment Screws Type 17 PHILLIPS SQUARE For hinge, plate and bracket attachment into hard or softwoods. Provides a flush fastening surface. Square drive prevents bit slippage. Type 17 tip self drills and helps eliminate wood splitting. The length of screw is taken from the surface of the material to the point of the screw, thus a flat head screw length includes the head of the screw. Phillips #2 Square #5 x 1/2 #5 x 5/8 #6 x 1/2 #6 x 5/8 #6 x 3/4 #6 x 1 #7 x 5/8 #8 x 5/8 #8 x 3/4 Keg Qty 35,000 30,000 25,000 25,000 20,000 20,000 20,000 15,000 12,000 Zinc 5X120 5X580 6X120 6X580 6X3400 6X10 7X580 8X5800 8X340 Zinc Type 17 6X5800 6X3410 8X34170 Antique Brass 6X122 6X582 6X3402 Antique Brass Type 17 6X3412 Nickel 6X121 6X581 6X3401 7X581 Nickel Type 17 6X5801 Polished Brass 6X583 Polished Brass Type 17 6X346 Zinc 6X120Q 6X580Q 6X340Q Zinc Type 17 6X58017Q Phillips #2 Square #5 x 1/2 #5 x 5/8 #6 x 1/2 #6 x 5/8 #6 x 3/4 #7 x 5/8 #8 x 5/8 #8 x 3/4 Box Qty 10,000 7,500 6,000 6,000 5,000 5,000 3,500 3,000 Zinc 5X120-B 5X580-B 6X120-B 6X580-B 6X3400-B 7X580-B 8X5800-B 8X340-B Zinc Type 17 6X5800-B 6X3410-B 8X58170-B 8X34170-B Almond 6X588-B 6X3404-B 8X344-B Almond Type 17 6X3414-B Antique Brass 5X122-B 5X582-B 6X122-B 6X582-B 6X3402-B 8X5802-B 8X342-B Antique Brass Type 17 6X5802-B 6X3412-B 8X34172-B BNBDL 5X584-B 6X125-B DACM 6X124-B 6X589-B 6X3406-B 8X346-B Nickel 5X581-B 6X121-B 6X581-B 6X3401-B 7X581-B 8X341-B Nickel Type 17 6X5801-B 8X34171-B Polished Brass 5X583-B 6X123-B 6X5803-B 6X3403-B 8X343-B Polished Brass Type 17 6X346-B White 6X585-B 6X3405-B 8X5805-B 8X345-B White Type 17 6X3415-B Zinc 6X120Q-B 6X580Q-B 6X340Q-B Zinc Type 17 6X58017Q-B 291
Hardware Attachment Screws Fine Thread Flat Head Screws Type 17 PHILLIPS Fine threads are designed especially for hardwoods such as oak and hard maple. For hinge, plate and bracket attachment into hard or softwoods. Provides a flush fastening surface. Type 17 tip self drills and helps eliminate wood splitting. The length of screw is taken from the surface of the material to the point of the screw, thus a flat head screw length includes the head of the screw. #6 x 5/8 Keg Qty 25,000 Phillips Polished Brass Type 17 6X58003 Phillips Polished Brass White Type 17 #4 x 5/8 #6 x 5/8 Box Qty 10,000 6,000 4X583-B 6X58005-B Coarse Thread Oval Head Screws PHILLIPS Typically mount on the outside of the face frame. Commonly used on exposed furniture hinges. The screw will countersink like a flat head, but the exposed oval head is rounded and finished to match the application. Phillips Antique Brass Polished Brass 5 x 5/8 Keg Qty 30,000 5X585 5X586 Use flat head screws to mount hinges to the cabinet door Use oval head screws to mount hinges to the cabinet frame 5 x 5/8 Box Qty 7,500 Phillips Antique Brass DACM Nickel Polished Brass 5X585-B 5X588-B 5X587-B 5X586-B Shown in use with Vitus H5011 furniture hinge 292
Coarse Thread Pan Head Screws Hardware Attachment Screws Type 17 PHILLIPS SQUARE PHILLIPS SQUARE COMBO Pan head provides a 90 degree mounting surface under the head to securely attach to flat surface hardware. Used to attach hardware to a variety of woods. Type 17 tip self drills and helps eliminate wood splitting. #6 x 1/2 #6 x 5/8 #8 x 5/8 #8 x 3/4 #10 x 5/8 #10 x 3/4 Keg Qty 25,000 20,000 14,000 11,000 10,000 9,000 Zinc 6X2580 8X580 Phillips Zinc Type 17 6X1200 8X3400 10X580 10X340 Antique Brass 6X2582 #2 Square Zinc Type 17 8X3400Q Combo Zinc Type 17 6X258017CH #6 x 1/2 #6 x 5/8 #6 x 3/4 #8 x 5/8 #8 x 3/4 #10 x 5/8 #10 x 3/4 Box Qty 6,000 6,000 5,000 3,500 2,500 2,500 2,000 Zinc 6X2580-B 6X2340-B 8X580-B Zinc Type 17 6X1200-B 8X3400-B 10X580-B 10X340-B Phillips Antique Brass 6X2582-B 6X2342-B Nickel 6X1205-B 6X2345-B Polished Brass 6X2343-B #2 Square Zinc Type 17 8X3400Q-B Use pan head screws to mount undermount slide clips to the drawer box Shown in use with Vitus US-CLIP for USE Series undermount drawer slides 293
Hardware Attachment Screws Coarse Thread Pan Washer Head Screws Type 17 SQUARE PHILLIPS SQUARE COMBO Large 90 degree mounting surface under the head to securely attach to flat surface hardware, especially compact hinges. Type 17 tip self drills and helps eliminate wood splitting. 7X0580WCQ is recommended for attaching Vitus compact hinges to the face frame. #7 x 5/8 #8 x 3/4 #8 x 1-1/4 #8 x 2 #8 x 2-1/2 #9 x 3 Keg Qty 18,000 11,000 6,000 3,500 2,500 2,000 #2 Square Zinc Type 17 8X034017WCQ Clear Brown Wax 8X114917WCQ 8X200917WCQ 8X212917WCQ 9X300917WCQ Combo Zinc Type 17 7X0580WCQ #8 x 5/8 #8 x 3/4 Box Qty 3,500 3,000 #2 Square Zinc Type 17 8X058017WCQ-B 8X034017WCQ-B 7X0580WCQ is recommended for attaching Vitus compact hinges to the face frame Shown in use with Vitus 3390 Series compact hinge 294
Coarse Thread Undercut Screws Hardware Attachment Screws Type 17 PHILLIPS Use undercut screws to mount epoxy slides Shown in use with Vitus 5000 Series epoxy drawer slides Used in countersunk holes where a clean and finished look is required. The undercut head is less likely to split and will sit more flush when compared to the standard flat head. Type 17 tip self drills and helps eliminate wood splitting. Recommended on epoxy drawer slides to prevent roller interference. Phillips #6 x 1/2 #6 x 5/8 #6 x 3/4 Keg Qty 25,000 20,000 20,000 Zinc 6U121 6U581 Zinc Type 17 6X340 Antique Brass 6U125 Phillips #6 x 1/2 #6 x 5/8 #6 x 3/4 Box Qty 6,000 6,000 5,000 Zinc 6U121-B 6U581-B Zinc Type 17 6X340-B Coarse Thread Truss Screws PHILLIPS PHILLIPS SQUARE COMBO Use truss screws to mount ball bearing slides Shown in use with Vitus 303FU Series ball bearing drawer slides Designed for ball bearing slide attachment. Provides a large mounting surface but allows for minimal head clearance. Truss head and coarse thread design reduces pullout in hardwoods, softwoods and particleboard. 8X7160 is recommended for heavy duty applications. #6 x 7/16 #8 x 7/16 Keg Qty 25,000 20,000 Phillips Zinc 6X7160 8X7160 Combo Zinc 8X7160CQ Black 8X7160CQB #6 x 7/16 #8 x 7/16 Box Qty 6,000 5,000 Phillips Zinc 6X7160-B 8X7160-B Combo Zinc 8X7160CQ-B Black 8X7160CQB-B 295
Hardware Attachment Screws Flat Head Euro Screws POZI PHILLIPS SQUARE Most commonly used to attach undermount, epoxy and ball bearing slides in European cabinets with pre-drilled 32mm system holes. Thread and head design provide strong holding power in all types of material. 7mm head is available for most drawer slide applications. 7.5mm head is available for drawer slides with oversized pre-drilled holes 7mm Head x 9mm 7mm Head x 10.5mm 7mm Head x 11.5mm 7mm Head x 13mm 7mm Head x 14.5mm 7mm Head x 18mm 7.5mm Head x 10mm 7.5mm Head x 13mm Box Qty 4,500 4,500 4,000 3,500 2,500 2,500 4,000 3,000 Pozi Nickel 6021-B 6041-B 6051-B 6061-B 6065-B 6071-B #2 Phillips Nickel 7031-B 7061-B #2 Square Nickel 6041Q-B 6061Q-B Pan Head Euro Screws PHILLIPS Most commonly used to attach undermount, epoxy, and ball bearing slides in European cabinets with pre-drilled 32mm system holes. Used in Euro 32mm system applications where the advantage of a pan head flat surface mount is required. Thread and head design provide strong holding power in all types of material. 9mm Head x 13.2mm Box Qty 2,500 #2 Phillips Nickel 1005194-B Use Euro screws to mount slides in European cabinets Shown in use with Vitus 5500 Series brown epoxy drawer slides 296
Truss Head Machine Screws Hardware Attachment Screws PHILLIPS SLOTTED COMBO Used to install knobs, pulls and other types of hardware into predrilled holes. Many lengths available for various material thicknesses. These are #8 size screws with 32 threads per inch. Phillips Slotted Combo 8/32 x 3/4 8/32 x 7/8 8/32 x 1 8/32x 1-1/8 8/32 x 1-1/4 8/32 x 1-1/2 8/32 x 1-5/8 8/32 x 1-3/4 8/32 x 1-7/8 Box Qty 1,500 2,500 1,500 1,000 1,000 1,000 1,000 1,000 1,000 Zinc 32X0340-B 32X0780-B 32X1001-B 32X1181-B 32X1141-B 32X1121-B 32X1581-B 32X1341-B 32X1781-B Truss Head Break Away Machine Screws PHILLIPS SLOTTED COMBO Use machine screws to mount decorative hardware to the cabinet door Shown in use with Elements 3910-SN knob Used to install knobs, pulls and other types of hardware into predrilled holes. Notched in ¼ increments to allow a quick break for the necessary length. Available in English and Metric thread types. 8/32 x 1-3/4 M4 x 45mm Keg Qty 4,000 4,000 Phillips Slotted Combo Zinc 32BREAK M4BREAK 8/32 x 1-3/4 Box Qty 1,000 Phillips Slotted Combo Zinc 32BREAK-B 297
Cabinet Assembly & Installation Screws Coarse Thread Flat Head with Nibs Screws Type 17 PHILLIPS SQUARE Made for cabinet construction. Flat head, square drive, coarse thread, Type 17 tip and elongated shank provide a fast and strong installation with reduced bit slippage and wood splitting. The length of screw is taken from the surface of the material to the point of the screw, thus a flat head screw length includes the head of the screw. Phillips #2 Square Clear Brown Wax Type 17 Clear Brown Wax Type 17 #8 x 1 #8 x 1-1/4 #8 x 1-1/2 #8 x 1-5/8 #8 x 1-3/4 Keg Qty 10,000 8,000 6,000 5,000 5,000 8X100917 8X114917 8X112917 8X158917 8X134917 8X100917Q 8X114917Q 8X112917Q 8X158917Q 8X134917Q Phillips #2 Square #8 x 2 #8 x 2-1/4 #9 x 2-1/2 #9 x 3 Keg Qty 4,000 10,000 2,500 2,300 Clear Brown Wax Type 17 8X200917 9X214917 9X212917 9X300917 Clear Brown Wax Type 17 8X200917Q 9X214917Q 9X212917Q 9X300917Q Coarse Thread Flat Head with Nibs Screws Type 17 PHILLIPS SQUARE COMBO Cabinet assembly screw with added nibs. Self-countersinks after material penetration. Type 17 tip pre-drills and prevents wood splitting. The length of screw is taken from the surface of the material to the point of the screw, thus a flat head screw length includes the head of the screw. #8 x 1 #8 x 1-1/8 #8 x 1-1/4 #8 x 1-1/2 #8 x 1-5/8 #8 x 1-3/4 #8 x 2 #9 x 2-1/2 #9 x 3 Keg Qty 10,000 8,000 8,000 6,000 5,000 5,000 4,300 2,500 2,300 Combo Zinc Type 17 8X1000 8X1180 8X1140 8X1120 8X1580 8X1340 8X2000 9X2120 9X3000 298
Cabinet Assembly & Installation Screws Coarse Thread Trim Head Screws SQUARE Trim head acts like a finishing nail. #4 sized head is mounted on a #6 body to make a discrete countersunk attachment. #1 square drive prevents bit slippage. The length of screw is taken from the surface of the material to the point of the screw, thus a trim head screw length includes the head of the screw. #6 x 1-5/8 #6 x 2-1/4 Keg Qty 5,000 5,000 #1 Square Black Plated 6X158 6X214 Coarse Thread Bugle Head Drywall Screws PHILLIPS SQUARE Made for driving through drywall and into wood studs. Also great for softwood and pre-drilled applications. Coarse thread and low thread count means high holding power and fast installation. The length of screw is taken from the surface of the material to the point of the screw, thus a bugle head screw length includes the head of the screw. #6 x 1 #6 x 1-1/4 #6 x 1-5/8 #6 X 2 #8 X 2-1/2 #8 X 3 Keg Qty 10,000 8,000 5,000 4,500 2,500 2,300 Phillips Black Plated 6110BUG 6114BUG 6158BUG 6200BUG 8200BUG 8300BUG #2 Square Zinc 8X300 299
Cabinet Assembly & Installation Screws Coarse Thread Standard Washer Head Screws Type 17 PHILLIPS SQUARE COMBO Round washer head combines advantages of the pan head design with an integrated washer head this prevents overdriving into softwoods and allows for maximum torque. Great for cabinet assembly, cabinet installation, and various hardware installations. Combo drive allows for a fast installation while minimizing bit slippage. Type 17 tip pre-drills and eliminates wood splitting. Combo #8 x 1-1/8 #8 x 1-1/4 #8 x 1-1/2 #8 x 2 #8 x 2-1/2 #8 X 3 #10 x 3 Keg Qty 5,000 4,000 5,500 3,500 2,500 2,000 1,600 Zinc Type 17 8X118017WCH 8X114017WCH 8X112017WCH 8X200017WCH 8X25017WCH 8X3000W Clear Brown Wax Type 17 10X3000W White Type 17 8X3000WH 10X3000WH Coarse Thread Large Washer Head Drawer Front Screws Type 17 PHILLIPS SQUARE Use large washer head screws to attach drawer fronts to the drawer box. Integrated oversized washer head is perfect for drawer front installation. Drill 5/16 3/8 oversized holes through the drawer box before drilling each screw through the box and into the drawer front. The drawer front can then be adjusted to align with other drawer faces. Then install the knob/pull screw to fix the drawer front at its correct position. Square drive and Type 17 tip are available for fast assembly with minimal bit slippage and wood splitting. Special thread length and a variety of sizes are available to ensure a tight fit in your application #8 x 7/8 #8 x 1 #8 x 1-1/8 #8 x 1-1/4 Keg Qty 6,000 7,000 5,000 5,000 Phillips Zinc 8X1078W 8X1000W 8X1180W 8X1140W #2 Square Zinc Type 17 8X100017WQ 8X118017WQ 8X114017WQ Shown in use with dubois dovetail drawer box with custom branding 300
Cabinet Assembly & Installation Screws Coarse Thread Face Frame/Pocket Hole Screws Type 17 SQUARE Modified pan head with square drive eliminates bit slippage and stripping. Type 17 pre-drills and prevents wood splitting. Heat treated for maximum strength. Deep coarse threads give extreme holding strength and fast installation into softwoods and particle board. #2 Square Clear Brown Wax Type 17 #6 x 1-1/4 #7 x 1-1/2 Keg Qty 8,000 7,000 6X1141 7X11504 Fine Thread Face Frame/Pocket Hole Screws Type 17 SQUARE Modified pan head with square drive eliminates bit slippage and stripping. Type 17 pre-drills and prevents wood splitting. Heat treated for maximum strength. Fine threads give extreme holding strength and fast installation into hardwoods. #2 Square #6 x 1-1/4 #6 x 1-1/2 Keg Qty 8,000 7,000 Clear Brown Wax Type 17 6X1140 6X1120 Use face frame screws in pocket holes to assemble the face frame 301
Cabinet Assembly & Installation Screws Confirmat Flat Head Screws POZI Popular in RTA and KD furniture applications. Blunt tip and coarse threads yield maximum engagement into a variety of materials. Shoulder allows the assembler to align panels before final tightening. The length of screw is taken from the surface of the material to the point of the screw, thus a flat head screw length includes the head of the screw. 7mm x 50mm Box Qty 500 Pozi Zinc HR7X50-B Sheet Metal Truss Head Screws Type 17 PHILLIPS Large #3 drive and #14 head designed for heavy duty applications. Sheet metal thread and Type 17 tip produce a self-starting screw which can penetrate wood, metal and man-made materials. #14 x 3 Keg Qty 800 #3 Phillips Zinc Type 17 14X3000 302
Special Application Hardware Draw Bolts HEX Designed for joining a variety of panels and countertops. 7/16 socket or wrench is used on the ¼-20 threaded bolt to tighten applications up to 3-1/2 thick. Bolt - 3-5/8 Length Plate - 1-1/4 Width Keg Qty 450 7/16 Hex Head Zinc 322 2 Piece Connector Screws POZI SLOTTED COMBO Designed for joining two panels. Pozi drive allows for maximum torque in a hand or machine-driven application. 5mm or 8mm pilot holes are required. For 5mm Drilling x 35-45mm Panel Thickness For 8mm Drilling x 31-41mm Panel Thickness Box Qty 400 600 Pozi Slotted Combo Nickel 565NP35-B 555NP31-B 303
Special Application Hardware Hollow Wall Anchor PHILLIPS SQUARE Designed to quickly drill into any 3/8 5/8 thick drywall using a standard #2 Phillips or square bit. Sharp self-drilling tip and aggressive threads quickly and easily penetrate the wall and the head sits flush on the exterior. Anchor accepts a #6 - #8 body screw for a wide variety of applications where a stud is not available. Strong zinc die cast construction supports 50lbs of shear hanging strength. Anchor can be easily backed out and removed. For 3/8-5/8 Wall Thickness, Accepts #6-#8 Screw Box Qty 500 Phillips Zinc 8X158ZN Countersunk Finishing Washers Used in a variety of applications to center, locate, space, and prevent screw head penetration into the material. Nickel finish and countersunk design provides a nice look in applications where the screw head and washer are visible. Two sizes available for #6 - #9 head screws For #6-#7 Head Screw For #8-#9 Head Screw Box Qty 7,500 6,000 Nickel 8FW-B 10FW-B 304