MicroBrite BT Series Product Highlights Ultra thin profile for easy installation in tight spaces Highest flux density among all Ai backlights Large working area with uniform illumination Three sizes available: BT0000 BT0000 BT20000 0mm x 0mm 00mm x 00mm 200mm x 00mm General Specifications Part Color All Controls (A Max) 62 0 BT0000 WHI, 4, 30 0.8 80 0.07 62 0.32 Electrical Specifications BT0000 WHI, 4, 30 0.44 80 0.9 62 0.67 BT20000 WHI, 4, 30 0.92 80 0.4 Normal Operating Temperature 0-60 C Weight (g) Standard Cable Information BT0000-4.43g (.92oz), BT0000-9.04g (6.88oz), BT20000-33g (.04oz) Up to 2 meters (80 ) long - 0 C rated PVC jacket, foil shield with drain. Photobiological Risk Factor IEC 6247 Exempt Applicable Wavelengths: 80 Group (Low-Risk) Applicable Wavelengths: 4, 30, 62 Compliance IP Rating Lumen Maintenance IP0 L70 = 0,000 hours Updated //207 DCN2272 Updated 6/28/207 DCN 242
MicroBrite BT Series Mechanical Specifications - BT0000 7.34.29.20 6.02 2.6.33.4 47.37.87 3.6 (illumn. area).40 4.7 2. 4.74 2.6 34.6 (illumn. area).3 70.03 2.76.0.06 DIMENSIONS ARE IN MILLIMETERS [INCHES] Optical Performance- BT0000 Intensity Distribution 80-00% 60-80% 40-60% 20-40% 0-20% 0-0% = 2.7 mm Optical measurement taken using BT0000-WHII3 Working Area (FWHM) @ Working Distance Area of Illuminance & Intensity Light Output 28 x 28 (mm) Irradiance (W/M²): Min 6.; Typ 37.0 @surface Illuminance (klux): Min 4. ; Typ 3 Updated //207 DCN 2272 Updated 6/28/207 DCN 242 2
Mechanical Specifications - BT0000 MicroBrite BT Series 2.28.48.20.0 4.3.2.44 92.29 3.63 8.34 (illumn. area) 3.36 04.60 4.2 84.2 (illumn. area) 3.3.0.06 04.7 4.2 20.02 4.73 DIMENSIONS ARE IN MILLIMETERS [INCHES] Optical Performance- BT0000 Intensity Distribution 80-00% 60-80% 40-60% 20-40% 0-20% 0-0% = 2 mm Optical measurement taken using BT0000-WHII3 Working Area (FWHM) @ Working Distance Area of Illuminance & Intensity Light Output 76 X 76 (mm) Irradiance (W/M²): Min 28.3; Typ.0 @surface Illuminance (klux): Min.0; Typ 60.0 Updated //207 DCN 2272 Updated 6/28/207 DCN 242 3
Mechanical Specifications - BT20000 MicroBrite BT Series 2.36.49.20 24.96 8.46 92.37 3.64 8.4 (illum. area) 3.36 04.72 4.2 84.2 (illumn. area) 7.2 204.67 8.06.33.4 29.96 8.66.0.06 DIMENSIONS ARE IN MILLIMETERS [INCHES] Optical Performance- BT20000 Intensity Distribution = 2 mm 80-00% 60-80% 40-60% 20-40% 0-20% 0-0% Optical measurement taken using BT20000-WHIIC Working Area (FWHM) @ Working Distance Area of Illuminance & Intensity Light Output 78 X 76 (mm) Irradiance (W/M²): Min 2.2; Typ 79.0 @surface Illuminance (klux): Min 9.; Typ 70.0 Updated //207 DCN 2272 Updated 6/28/207 DCN 242 4
Part Number Key MicroBrite BT Series Model Model Extension Spectral Wavelength Connector/ Control Alternative Connector BT XXXXXX XXX XX XXX BT 0000 0000 20000 4 (blue) 30 (green) 62 (red) 80 (IR) WHI (white) C C IC I3 I3S M2 Ex: BT0000-WHIC BT20000-62IC Available with IC, I3, and I3S Stock Product: shipped next day None Build to Order: shipped in two weeks Connector Control Options C Connector For use with: DCS Series Controllers C Connector For use with: Pulsar 320 Strobe Controller. ICS 2 (IC) Continous in-line controller Powered with: 24V power supply ICS 3 (I3) Combination strobe/continous in-line controller Powered with: 24V power supply ICS 3S (I3S) Default-OFF strobe/continous in-line controller Powered with: 24V power supply Operation and Wiring Pin (M2) ICS (IC) ICS 2 Function Wire Color +24 VDC Brown 2 0-0 VDC White Analog Control 3 GND Blue 4 GLO Black N/A Gray ICS 3 (I3 and I3S) ICS 3 (I3 and I3S) Pin (M2) Function PNP/Active High Trigger Wire Color +24 VDC Brown 2 Reserved White 3 GND Blue 4 0-0 VDC Analog Control Black Gray Optional M2 Pinout 2 4 male -position 3 Updated //207 DCN 2272 Updated 6/28/207 DCN 242
MicroBrite BT Series Warranty Information Every Advanced illumination, Inc. (Ai) product is thoroughly inspected and tested before leaving the factory. Products are warranted to be free of defects in workmanship and materials for a period of two years from the original date of purchase. Should a defect develop during this period, please contact Ai Customer Service or your Ai distributor for a Return Merchandise Authorization (RMA), and return the complete product, freight prepaid, to Ai. If a defect is found, Ai will - at our discretion - repair or replace the product without charge. Ai claims no liability for any implied warranties, including merchantability and fitness for a specific purpose. Electromagnetic Compatibility This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) as stated in the product specifications. These requirements and limits are designed to provide reasonable protection against harmful interference only when the product is operated in its intended industrial electromagnetic environment. To minimize the potential for electromagnetic interference or unacceptable performance degradation, install and use this product in strict accordance with the instructions in the product documentation. Customer Service For information on existing orders, or to make an order adjustment, contact us Monday through Friday 8:00 am to :00 pm ET or send an email to orders@advill.com. Company Information Advanced Illumination 440 State Garage Road, Rochester VT. 0767 Phone: 802.767.3830 Fax: 802.767.383 Email: info@advancedillumination.com Web: advancedillumination.com 20 Advanced Illumination Inc. All rights reserved Updated //207 DCN 2272 Updated 6/28/207 DCN 242 6