DESCRIPTION Less than 100 mm in height, the TTS LED downlight is suitable for most applications. Powered by Philips SLM LED engine, it is fitted with a multi faceted reflector providing a choice of beam angles. A white softlight option is also available. It is compatible with the PI200 Plaster-in kit for a seamless finish and offers a wide range of decorative accessories, an IP65 bezel option and various control, dimming and emergency conversion options. SPECIFICATIONS Nominal weight Mains voltage 0.5 kg 220-240 V 99 mm 25 mm max Mains frequency Ingress protection (front) 50-60 Hz IP20 Ingress protection (rear) IP20 ø110 mm cut-out ø130 mm bezel Mains lead Dimming lead Operating ambient temperature Colour consistency - MacAdam Ellipse Warranty 500 mm LSF 500 mm 2 core LSF -25 C to +35 C 3 SDCM 5 years Power factor >0.9 Colour rendering R a 80 Beam angle 43 PERFORMANCE DATA Colour Temp (K) Luminaire Output (Llm) Luminaire Power (W) Luminaire Efficacy (Llm/W) UGR Model Ref 3000 688 7.0 98.3 14.2 TTS801 3000 1294 11.5 112.3 16.4 TTS1101 3000 2015 18.3 109.9 18.0 TTS2001 3000 2687 26.5 101.4 19.0 TTS3001 4000 717 7.0 102.5 14.4 TTS802 4000 1349 11.5 117.1 16.6 TTS1102 4000 2102 18.3 114.6 18.1 TTS2002 4000 2803 26.5 105.7 19.1 TTS3002 Full RELUX photometric data and BIM files available to download from the relevant product page on the Gamma Illumination website illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-162-REV14 11/09/2018 1 of 6
LIFE Model Ref 25 C Ambient Temperature L90 / B10 L80 / B10 L70 / B10 TTS801 >50,000 h >50,000 h >50,000 h TTS802 >50,000 h >50,000 h >50,000 h TTS1101 41,000 h >50,000 h >50,000 h TTS1102 41,000 h >50,000 h >50,000 h TTS2001 38,000 h >50,000 h >50,000 h TTS2002 38,000 h >50,000 h >50,000 h TTS3001 26,000 h >50,000 h >50,000 h TTS3002 26,000 h >50,000 h >50,000 h L VALUE = % of initial lumens maintained after specified time B VALUE = % of fittings that will have depreciated below the L value after specified time EXAMPLE - 50,000 hours L70 / B50 L70 = 70% of initial lumens maintained after 50,000 hours B50 = 50% of fittings will have depreciated below 70% of the initial lumens after 50,000 hours OR 50% of fittings will have maintained 70% of the initial lumens after 50,000 hours RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-162-REV14 11/09/2018 2 of 6
GREAT WHITE TTS OPTIONS Touch Dimming SELF TEST /NB 30 narrow beam reflector /WB 53 wide beam reflector T+DALI Touch dimming / DALI /EM EM conversion with remote indicator /EMD DALI / Self test emergency conversion with remote indicator TA200/BL Black bezel Product variations Other colours and specifications available on request SELF TEST /EMI Emergency conversion with integral indicator /EMDI DALI / Self test emergency conversion with integral indicator /SPC Single Point Connection to an ILEM product. See ILEM datasheet TA200/CH Chrome bezel TA200/BA Brushed aluminium bezel BEZELS TA200/WH White bezel IP65 / IK10 BEZEL IP65/001/130 IP65 clear polycarbonate RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-162-REV14 11/09/2018 3 of 6
ANTI-TAMPER BEZELS AT200/WH White anti-tamper bezel AT200/CH Chrome anti-tamper bezel AT200/BA Brushed aluminium anti-tamper bezel AT200/BL Black anti-tamper bezel Product variations Other colours and specifications available on request GF208 / GF218 Anti-tamper driver / Anti-tamper bit DECORATIVE BEZELS TA225/WH white complete with clear halo TA225/CH chrome complete with clear halo TA225/BA brushed aluminium complete with clear halo TA225/BL black complete with clear halo TA226/WH white complete with opal halo TA226/CH chrome complete with opal halo TA226/BA brushed aluminium complete with opal halo TA226/BL black complete with opal halo RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-162-REV14 11/09/2018 4 of 6
FIXING OPTIONS PI200 Plaster-in kit. Please see PI200 datasheet for details. TTS TA200/WH PI200 Example of TTS with white bezel and plaster-in kit HALOKIT.001 Halo kit - maximum cut-out 150 mm SOFTLIGHT REFLECTORS /WSL White softlight reflector. Suitable for luminaire outputs up to 1800 Llm ACCESSORIES TA220/BLUE Blue hi-light TA220/FROST Frosted hi-light TA210/BLUE Blue vertical halo TA210/FROST Frosted vertical halo TA206 IP54 glass scatter dome TA240 IP54 clear glass TA241 IP54 centre etched glass TA242 IP54 fully etched glass TA208 Kick reflector RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-162-REV14 11/09/2018 5 of 6
PRODUCT VARIATIONS VARIATION Coloured bezel Specify any RAL colour Reflector finish Please speak to Sales Plug and socket systems To your specification Reduced outputs To your specification Product variations Other specifications available on request FURTHER INFORMATION SwitchDIM 30 0 400 30 Declaration of Conformity Download at Photometric data Download at BIM files Download at Thornhill Road Business Park Tenter Fields, Dewsbury West Yorkshire WF12 9QT FS 593079 RELUX photometric data and BIM files are available to download at illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS-162-REV14 11/09/2018 6 of 6